[lmdze] Log of /trunk/Compilation

Revision 121 - Directory Listing
Modified Wed Jan 28 16:10:02 2015 UTC (9 years, 3 months ago) by guez

In procedure fxhyp, extracted the body of the loop on ik into a new
procedure:  fxhyp_loop_ik.

dzoomx and dzoomy must now be fractions of the entire range, they
cannot be ranges in degrees or rad.

In fxhyp, force Xf(2 * nmax) = pi_d instead of possibly doing it in
fxhyp_loop_ik.

In fxhyp_loop_ik, when testing whether xvrai is between -pi and pi,
changed the boundaries from -pi - 0.1 to - pi_d - 1d-5 and from pi +
0.1 to pi_d + 1d-5. This reveals a misconception of the
code. Therefore, this version does not work.

Revision 120 - Directory Listing
Modified Tue Jan 13 14:56:15 2015 UTC (9 years, 3 months ago) by guez

In procedure fxhyp, removed the possibility to set scal180 to
false. The useful lower bound of fhyp and xxpr is not 0. It does not
make sense to give the save attribute to is2 since fxhyp is only
called one per run. Bug fix: is2 could be used without being
defined. The bug did not appear because is2 had the save attribute so
it was initialized at 0.

Revision 119 - Directory Listing
Modified Wed Jan 7 14:34:57 2015 UTC (9 years, 3 months ago) by guez

Removed procedure fxyhyper. Useless intermediary between inigeom and
fxhyp, fyhyp. Removed argument yprimv of fyhyp, not used in
inigeom. Downgraded rlonm025 and rlonp025 from arguments to local
variables of fxhyp, not used in inigeom. Downgraded arguments
champmin, champmax of fxhyp and fyhyp to local variables: print them
in fxhyp and fyhyp instead of fxyhyper.

Removed arguments xzoomdeg, grossism, dzooma, tau of fxhyp. Use
directly module variables clon, grossismx, dzoomx, taux instead.

Removed arguments yzoomdeg, grossism, dzooma, tau of fyhyp. Use
directly module variables clat, grossismy, dzoomy, tauy instead.

In procedure yamada4, l0 does not need the save attribute. It is
defined at each call.

Revision 118 - Directory Listing
Modified Thu Dec 18 17:30:24 2014 UTC (9 years, 4 months ago) by guez

In file grilles_gcm.nc, renamed variable phis to orog, deleted
variable presnivs.

Removed variable bug_ozone from module clesphys.

In procedure ozonecm, moved computation of sint and cost out of the
loops on horizontal position and vertical level. Inverted the order of
the two loops. We can then move all computations from slat to aprim
out of the loop on vertical levels. Created variable slat2, following
LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12
from radlwsw to ozonecm, following LMDZ.

Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq,
pmflxr, pmflxs, prfl, psfl of phytrac.

In procedure yamada4, for all the arrays, replaced the dimension klon
by ngrid. At the end of the procedure, for the computation of kmn,kn,
kq and q2, changed the upper limit of the loop index from klon to ngrid.

In radlwsw, for the calculation of pozon, removed the factor
paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the
factor 101325.0/PPSOL(JL), as in LMDZ.

Revision 115 - Directory Listing
Modified Fri Sep 19 17:36:20 2014 UTC (9 years, 7 months ago) by guez

Extracted code from tau2alpha for first call into new procedure
init_tau2alpha. dxdys, dxdyu, dxdyv are now local variables if guide
computed by init_tau2alpha. This allows us to remove terrible argument
type of tau2alpha: we just give to tau2alpha the right dxdy and
rlat.

In module conf_guide_m, changed default values of tau_min_*, because
0.02 is too small for the default daystep = 240, iperiod = 5. Changed
default values of guide_[uv] to false. Moved variable ok_guide from
conf_gcm_m to conf_guide_m, ok_guide is no longer an input parameter,
it is computed from guide_*. Had then to move test on ok_guide and
day_step from conf_gcm_m to conf_guide_m. Added checks on input
nudging parameters in procedure conf_guide. Upgraded variable factt to
module conf_guide_m in order to check nudging parameters. Bug fix:
variable guide_q was not in namelist conf_guide_nml.

Removed unused variables aire_min, aire_max of MODULE guide_m.

Moved the call to conf_guide from guide to gcm. This was needed to
define ok_guide before getting into guide (since ok_guide is no longer
in conf_gcm_m). Moved test on grossismx and grossismy from tau2alpha
to guide. It is clearer now that only tau_max is used for a regular
grid, and we do not have to repeat this test in each call to
tau2alpha. In guide, we only call writefield when alpha is not a
constant.

Revision 113 - Directory Listing
Modified Thu Sep 18 19:56:46 2014 UTC (9 years, 7 months ago) by guez

Moved the call to read_serre out of conf_gcm so that it can be called
only in the program ce0l, not in gcm. In gcm, variables of module
serre are read from start file. Added reading of dzoomx, dzoomy, taux,
tauy from start file, in dynetat0. Those variables were written by
dynredem0 but not read.

Removed possibility fxyhypb = false, because the geometric part of the
program is such a mess. Could then remove variables transx, transy,
alphax, alphay, pxo, pyo of module serre.

Bug fix in tau2alpha: missing save attributes. The first call to
tau2alpha needs to compute dxdyu and dxdyv regardless of value of
argument type, because they will be needed for subsequent calls to
tau2alpha with various values of argument type.

Revision 112 - Directory Listing
Modified Thu Sep 18 13:36:51 2014 UTC (9 years, 7 months ago) by guez

Removed 8 first arguments of fxyhyper, use variables of module serre
instead.

Moved reading of variables of module serre from procedure conf_gcm to
new procedure read_serre.

In guide, added conditions to avoid useless calls to tau2alpha and
writefield. Bugfix: offline corresponds to alpha = 1. Open only one
NetCDF file to read number of vertical levels.

In tau2alpha, added conditions to avoid useless computations of dxdyu
and dxdyv. gamma is not needed for a regular grid.

Revision 110 - Directory Listing
Modified Wed Sep 17 11:55:05 2014 UTC (9 years, 7 months ago) by guez

Moved variables of module write_field to module
createnewfield_m. Deleted module variable varid because we know that
varid is always 1. Module variable record was modified in 2 procedures
so Moved assignment:

Record(NbField) = 1

to writefield.

Revision 109 - Directory Listing
Modified Wed Sep 17 10:08:00 2014 UTC (9 years, 7 months ago) by guez

Moved a call to writefield from guide to tau2alpha. (dxdys does not
change with itau.) So dxdys does not need to be a module variable any
longer. Other variables of modules tau2alpha_m downgraded to local
variables of tau2alpha, since they were not used elsewhere.

Procedures write_field[13]d and formcoord were never called. Could
then remove int2str.

Inline writefield_gen into writefield.

CreateNewField takes an integer array argument instead of 3 scalar
integers. CreateNewField now creates a number of dimensions adapted to
the rank of the output field, instead of always 4 dimensions.

Changed names of variables of module write_field: fieldid to
ncid, fieldindex to record, fieldvarid to varid.

In writefield_gen, if index == -1, no need to call GetFieldIndex
again, we know that the result is nbfield.

In guide, moved calls to writefield for some variables inside if
first_call: those variables do not change with time. Removed ztau:
computed only to be output, does not seem meaningful. Removed
writefield for aire: does not change with time and is already in
"grilles_gcm.nc".

Revision 108 - Directory Listing
Modified Tue Sep 16 14:00:41 2014 UTC (9 years, 7 months ago) by guez

Imported writefield from LMDZ. Close at the end of gcm the files which
were created by writefiled (not done in LMDZ).

Removed procedures for the output of Grads files. Removed calls to
dump2d. In guide, replaced calls to wrgrads by calls to writefield.

In vlspltqs, removed redundant programming of saturation
pressure. Call foeew from module FCTTRE instead.

Bug fix in interpre: size of w exceeding size of correponding actual
argument wg in advtrac.

In leapfrog, call guide until the end of the run, instead of six hours
before the end.

Bug fix in readsulfate_preind: type of arguments.

Revision 107 - Directory Listing
Modified Thu Sep 11 15:09:15 2014 UTC (9 years, 7 months ago) by guez

Imported procedure grilles_gcm_sub from LMDZ. Had then to transform
local variable phis of etat to argument.

Replaced calls to lnblnk by calls to trim.

Removed arguments nlat, klevel and griscal of filtreg. Replaced
integer arguments ifiltre and iaire by logical arguments direct and
intensive.

Changed default values of guide_t and guide_q to false.

Revision 104 - Directory Listing
Modified Thu Sep 4 10:05:52 2014 UTC (9 years, 7 months ago) by guez

Removed procedure sortvarc0. Called sortvarc with an additional
argument resetvarc instead. (Following LMDZ.) Moved current time
computations and some printing statements from sortvarc to
caldyn. Could then remove arguments itau and time_0 of sortvarc, and
could remove "use dynetat0". Better to keep "dynetat0.f" as a gcm-only
file.

Moved some variables from module ener to module sortvarc.

Split file "mathelp.f" into single-procedure files.

Removed unused argument nadv of adaptdt. Removed dimension arguments
of bernoui.

Removed unused argument nisurf of interfoce_lim. Changed the size of
argument lmt_sst of interfoce_lim from klon to knon. Removed case when
newlmt is false.

dynredem1 is called only once in each run, either ce0l or gcm. So
variable nb in call to nf95_put_var was always 1. Removed variable nb.

Removed dimension arguments of calcul_fluxs. Removed unused arguments
precip_rain, precip_snow, snow of calcul_fluxs. Changed the size of
all the arrays in calcul_fluxs from klon to knon.

Removed dimension arguments of fonte_neige. Changed the size of all
the arrays in fonte_neige from klon to knon.

Changed the size of arguments tsurf and tsurf_new of interfsurf_hq
from klon to knon. Changed the size of argument ptsrf of soil from
klon to knon.

Revision 103 - Directory Listing
Modified Fri Aug 29 13:00:05 2014 UTC (9 years, 8 months ago) by guez

Renamed module cvparam to cv_param. Deleted procedure
cv_param. Changed variables of module cv_param into parameters.

In procedures cv_driver, cv_uncompress and cv3_uncompress, removed
some arguments giving dimensions and used module variables klon and
klev instead.

In procedures gradiv2, laplacien_gam and laplacien, changed
declarations of local variables because klevel is not always klev.

Removed code for nudging surface pressure.

Removed arguments pim and pjm of tau2alpha. Added assignment of false
to variable first.

Replaced real argument del of procedures foeew and FOEDE by logical
argument.

Revision 102 - Directory Listing
Modified Tue Jul 15 13:43:24 2014 UTC (9 years, 9 months ago) by guez

Removed unused file "condsurf.f" (only useful for ocean slab).

day_step must be a multiple of 4 * iperiod if ok_guide.

Changed type of variable online of module conf_guide_m from integer to
logical. Value -1 was not useful, equivalent to not ok_guide.

Removed argument masse of procedure guide. masse is kept consistent
with ps throughout the run. masse need only be computed again just
after ps has been modified. In prodecure guide, replaced use of
remanent variable first by test on itau. Replaced test on variable
"test" by test on integer values.

In leapfrog, for the call to guide, replaced test on real values by
test on integer values.

Bug fix in tau2alpha: computation of dxdyv (following LMDZ revision 1040).

In procedure wrgrads, replaced badly chosen argument name "if" by i_f.

Revision 101 - Directory Listing
Modified Mon Jul 7 17:45:21 2014 UTC (9 years, 9 months ago) by guez

Removed unused files "interfoce_slab.f" and "gath2cpl.f". Removed
unused variables coastalflow and riverflow of module
interface_surf. Removed unused arguments cal, radsol, dif_grnd,
fluxlat, fluxsens, dflux_s, dflux_l of procedure fonte_neige. Removed
unused arguments tslab, seaice of procedure interfsurf_hq and
clqh. Removed unused arguments seaice of procedure clmain.

In interfsurf_hq, used variable soil_model of module clesphys2 instead
of cascading it as an argument from physiq.

In phyetat0, stop if masque not found.

Variable TS instead of "TS[0-9][0-9]" in "(re)startphy.nc", with
additional dimension nbsrf.

Revision 100 - Directory Listing
Modified Wed Jul 2 19:07:58 2014 UTC (9 years, 10 months ago) by guez

Removed unused variable tmp_rlic of module interface_surf.

Removed useless call to gath2cpl in procedure interfsurf_hq. Removed
then uncalled procedure gath2cpl.

Revision 99 - Directory Listing
Modified Wed Jul 2 18:39:15 2014 UTC (9 years, 10 months ago) by guez

Created procedure test_disvert (following LMDZ). Added procedures
hybrid and funcd in module disvert_m. Upgraded compute_ab from
internal procedure of disvert to module procedure. Added variables y,
ya in module disvert_m. Upgraded s from local variable of procedure
disvert to module variable.

Renamed allowed value of variable vert_sampling in procedure disvert
from "read" to "read_hybrid". Added possibility to read pressure
values, value "read_pressure". Replaced vertical distribution for
value "param" by the distribution "strato_correct" from LMDZ (but kept
the value "param"). In case "tropo", replaced 1 by dsigmin (following
LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ).

Changed computation of bp in procedure compute_ab.

Removed debugindex case in clmain. Removed useless argument rlon of
procedure clmain. Removed useless variables ytaux, ytauy of procedure
clmain.

Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure
etat0.

Removed variable ok_veget:. coupling with the model Orchid is not
possible. Removed variable ocean: modeling an ocean slab is not
possible.

Removed useless variables tmp_rriv and tmp_rcoa from module
interface_surf.

Moved initialization of variables da, mp, phi in procedure physiq to
to inside the test iflag_con >= 3.

Revision 98 - Directory Listing
Modified Tue May 13 17:23:16 2014 UTC (9 years, 11 months ago) by guez

Split inter_barxy.f : one procedure per module, one module per
file. Grouped the files into a directory.

Split orbite.f.

Value of raz_date read from the namelist is taken into account
(resetting the step counter) even if annee_ref == anneeref and day_ref
== dayref. raz_date is no longer modified by gcm main unit. (Following
LMDZ.)

Removed argument klon of interfsur_lim. Renamed arguments lmt_alb,
lmt_rug to alb_new, z0_new (same name as corresponding actual
arguments in interfsurf_hq).

Removed argument klon of interfsurf_hq.

Removed arguments qs and d_qs of diagetpq. Were always
zero. Downgraded arguments d_qw, d_ql of diagetpq to local variables,
they were not used in physiq. Removed all computations for solid water
in diagetpq, was just zero.


Downgraded arguments fs_bound, fq_bound of diagphy to local variables,
they were not used in physiq. Encapsulated in a test on iprt all
computations in diagphy.

Removed parameter nbtr of module dimphy. Replaced it everywhere in the
program by nqmx - 2.

Removed parameter rnpb of procedure physiq. Kept the true case in
physiq and phytrac. Could not work with false case anyway.

Removed arguments klon, llm, airephy of qcheck. Removed argument ftsol
of initrrnpb, was not used.

Revision 97 - Directory Listing
Modified Fri Apr 25 14:58:31 2014 UTC (10 years ago) by guez

Module pressure_var is now only used in gcm. Created local variables
pls and p3d in etat0, added argument p3d to regr_pr_o3.

In leapfrog, moved computation of p3d and exner function immediately
after integrd, for clarity (does not change the execution).

Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra,
tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress;
ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of
cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt,
dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver

Removed argument d_tra and computation of d_tra in concvl. Removed
argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just
set to 0 in cv_driver, associated to d_tra in concvl, and set again to
zero in concvl.

	ViewVC Help
Powered by ViewVC 1.1.21