Log of /trunk/Compilation/src_gcm_only

---

Revision 108 - (view) (annotate) - [select for diffs]
Modified Tue Sep 16 14:00:41 2014 UTC (9 years, 7 months ago) by guez
File length: 3095 byte(s)
Diff to previous 107

Imported writefield from LMDZ. Close at the end of gcm the files which
were created by writefiled (not done in LMDZ).

Removed procedures for the output of Grads files. Removed calls to
dump2d. In guide, replaced calls to wrgrads by calls to writefield.

In vlspltqs, removed redundant programming of saturation
pressure. Call foeew from module FCTTRE instead.

Bug fix in interpre: size of w exceeding size of correponding actual
argument wg in advtrac.

In leapfrog, call guide until the end of the run, instead of six hours
before the end.

Bug fix in readsulfate_preind: type of arguments.

---

Revision 107 - (view) (annotate) - [select for diffs]
Modified Thu Sep 11 15:09:15 2014 UTC (9 years, 7 months ago) by guez
File length: 2960 byte(s)
Diff to previous 104

Imported procedure grilles_gcm_sub from LMDZ. Had then to transform
local variable phis of etat to argument.

Replaced calls to lnblnk by calls to trim.

Removed arguments nlat, klevel and griscal of filtreg. Replaced
integer arguments ifiltre and iaire by logical arguments direct and
intensive.

Changed default values of guide_t and guide_q to false.

---

Revision 104 - (view) (annotate) - [select for diffs]
Modified Thu Sep 4 10:05:52 2014 UTC (9 years, 7 months ago) by guez
File length: 2969 byte(s)
Diff to previous 103

Removed procedure sortvarc0. Called sortvarc with an additional
argument resetvarc instead. (Following LMDZ.) Moved current time
computations and some printing statements from sortvarc to
caldyn. Could then remove arguments itau and time_0 of sortvarc, and
could remove "use dynetat0". Better to keep "dynetat0.f" as a gcm-only
file.

Moved some variables from module ener to module sortvarc.

Split file "mathelp.f" into single-procedure files.

Removed unused argument nadv of adaptdt. Removed dimension arguments
of bernoui.

Removed unused argument nisurf of interfoce_lim. Changed the size of
argument lmt_sst of interfoce_lim from klon to knon. Removed case when
newlmt is false.

dynredem1 is called only once in each run, either ce0l or gcm. So
variable nb in call to nf95_put_var was always 1. Removed variable nb.

Removed dimension arguments of calcul_fluxs. Removed unused arguments
precip_rain, precip_snow, snow of calcul_fluxs. Changed the size of
all the arrays in calcul_fluxs from klon to knon.

Removed dimension arguments of fonte_neige. Changed the size of all
the arrays in fonte_neige from klon to knon.

Changed the size of arguments tsurf and tsurf_new of interfsurf_hq
from klon to knon. Changed the size of argument ptsrf of soil from
klon to knon.

---

Revision 103 - (view) (annotate) - [select for diffs]
Modified Fri Aug 29 13:00:05 2014 UTC (9 years, 8 months ago) by guez
File length: 2918 byte(s)
Diff to previous 102

Renamed module cvparam to cv_param. Deleted procedure
cv_param. Changed variables of module cv_param into parameters.

In procedures cv_driver, cv_uncompress and cv3_uncompress, removed
some arguments giving dimensions and used module variables klon and
klev instead.

In procedures gradiv2, laplacien_gam and laplacien, changed
declarations of local variables because klevel is not always klev.

Removed code for nudging surface pressure.

Removed arguments pim and pjm of tau2alpha. Added assignment of false
to variable first.

Replaced real argument del of procedures foeew and FOEDE by logical
argument.

---

Revision 102 - (view) (annotate) - [select for diffs]
Modified Tue Jul 15 13:43:24 2014 UTC (9 years, 9 months ago) by guez
File length: 2928 byte(s)
Diff to previous 101

Removed unused file "condsurf.f" (only useful for ocean slab).

day_step must be a multiple of 4 * iperiod if ok_guide.

Changed type of variable online of module conf_guide_m from integer to
logical. Value -1 was not useful, equivalent to not ok_guide.

Removed argument masse of procedure guide. masse is kept consistent
with ps throughout the run. masse need only be computed again just
after ps has been modified. In prodecure guide, replaced use of
remanent variable first by test on itau. Replaced test on variable
"test" by test on integer values.

In leapfrog, for the call to guide, replaced test on real values by
test on integer values.

Bug fix in tau2alpha: computation of dxdyv (following LMDZ revision 1040).

In procedure wrgrads, replaced badly chosen argument name "if" by i_f.

---

Revision 101 - (view) (annotate) - [select for diffs]
Modified Mon Jul 7 17:45:21 2014 UTC (9 years, 9 months ago) by guez
File length: 2939 byte(s)
Diff to previous 100

Removed unused files "interfoce_slab.f" and "gath2cpl.f". Removed
unused variables coastalflow and riverflow of module
interface_surf. Removed unused arguments cal, radsol, dif_grnd,
fluxlat, fluxsens, dflux_s, dflux_l of procedure fonte_neige. Removed
unused arguments tslab, seaice of procedure interfsurf_hq and
clqh. Removed unused arguments seaice of procedure clmain.

In interfsurf_hq, used variable soil_model of module clesphys2 instead
of cascading it as an argument from physiq.

In phyetat0, stop if masque not found.

Variable TS instead of "TS[0-9][0-9]" in "(re)startphy.nc", with
additional dimension nbsrf.

---

Revision 100 - (view) (annotate) - [select for diffs]
Modified Wed Jul 2 19:07:58 2014 UTC (9 years, 9 months ago) by guez
File length: 2956 byte(s)
Diff to previous 98

Removed unused variable tmp_rlic of module interface_surf.

Removed useless call to gath2cpl in procedure interfsurf_hq. Removed
then uncalled procedure gath2cpl.

---

Revision 98 - (view) (annotate) - [select for diffs]
Modified Tue May 13 17:23:16 2014 UTC (9 years, 11 months ago) by guez
File length: 2967 byte(s)
Diff to previous 97

Split inter_barxy.f : one procedure per module, one module per
file. Grouped the files into a directory.

Split orbite.f.

Value of raz_date read from the namelist is taken into account
(resetting the step counter) even if annee_ref == anneeref and day_ref
== dayref. raz_date is no longer modified by gcm main unit. (Following
LMDZ.)

Removed argument klon of interfsur_lim. Renamed arguments lmt_alb,
lmt_rug to alb_new, z0_new (same name as corresponding actual
arguments in interfsurf_hq).

Removed argument klon of interfsurf_hq.

Removed arguments qs and d_qs of diagetpq. Were always
zero. Downgraded arguments d_qw, d_ql of diagetpq to local variables,
they were not used in physiq. Removed all computations for solid water
in diagetpq, was just zero.


Downgraded arguments fs_bound, fq_bound of diagphy to local variables,
they were not used in physiq. Encapsulated in a test on iprt all
computations in diagphy.

Removed parameter nbtr of module dimphy. Replaced it everywhere in the
program by nqmx - 2.

Removed parameter rnpb of procedure physiq. Kept the true case in
physiq and phytrac. Could not work with false case anyway.

Removed arguments klon, llm, airephy of qcheck. Removed argument ftsol
of initrrnpb, was not used.

---

Revision 97 - (view) (annotate) - [select for diffs]
Modified Fri Apr 25 14:58:31 2014 UTC (10 years ago) by guez
File length: 2968 byte(s)
Diff to previous 94

Module pressure_var is now only used in gcm. Created local variables
pls and p3d in etat0, added argument p3d to regr_pr_o3.

In leapfrog, moved computation of p3d and exner function immediately
after integrd, for clarity (does not change the execution).

Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra,
tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress;
ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of
cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt,
dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver

Removed argument d_tra and computation of d_tra in concvl. Removed
argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just
set to 0 in cv_driver, associated to d_tra in concvl, and set again to
zero in concvl.

---

Revision 94 - (view) (annotate) - [select for diffs]
Modified Tue Apr 1 17:27:47 2014 UTC (10 years ago) by guez
File length: 2953 byte(s)
Copied from: trunk/src_gcm_only revision 93
Diff to previous 93

Grouped compilation files into directory Compilation.

---

Revision 93 - (view) (annotate) - [select for diffs]
Modified Tue Apr 1 15:50:48 2014 UTC (10 years ago) by guez
Original Path: trunk/src_gcm_only
File length: 2953 byte(s)
Diff to previous 90

Moved variable calendar_used, un_an and mon_len from module calendar
to module ioconf_calendar_m. Removed unused variables cal, start_day,
start_sec of module calendar.

Inlined procedure ju2ymds_internal into procedure ju2ymds. Inlined
procedure ymds2ju_internal into procedure ymds2ju.

Removed generic interface ioget_calendar. Merged ioget_calendar_real1
and ioget_calendar_real2 into ioget_calendar_real.

---

Revision 90 - (view) (annotate) - [select for diffs]
Modified Wed Mar 12 21:16:36 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/src_gcm_only
File length: 2930 byte(s)
Diff to previous 89

Removed procedures ini_histday, ini_histhf, write_histday and
write_histhf.

Divided file regr_pr_coefoz.f into regr_pr_av.f and
regr_pr_int.f. (Following LMDZ.) Divided module regr_pr_coefoz into
modules regr_pr_av_m and regr_pr_int_m. Renamed regr_pr_av_coefoz to
regr_pr_av and regr_pr_int_coefoz to regr_pr_int. The idea is that
those procedures are more general than Mobidic.

Removed argument dudyn of calfis and physiq. dudyn is not used either
in LMDZ. Removed computation in calfis of unused variable zpsrf (not
used either in LMDZ). Removed useless computation of dqfi in calfis
(part 62): the results were overwritten. (Same in LMDZ.)

---

Revision 89 - (view) (annotate) - [select for diffs]
Modified Tue Mar 11 16:03:19 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/src_gcm_only
File length: 2962 byte(s)
Diff to previous 83

Removed call to pvtheta in calfis because the result pvteta is not
used (not used either in LMDZ).

Removed unused argument dv of calfis. (Corresponding argument in LMDZ
is pdvcov and computations from pdvcov are made in calfis but not
used.)

Removed procedures that were not called.

---

Revision 83 - (view) (annotate) - [select for diffs]
Modified Thu Mar 6 15:12:00 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/src_gcm_only
File length: 3048 byte(s)
Diff to previous 82

In procedure conf_guide, replaced calls to getpar by reading a
namelist. Removed file getparam.f, now unused. So getin of IOIPSL is
now unused too. Removed files getincom.f, getincom2.f, cmpblank.f,
find_sig.f, gensig.f and nocomma.f.

Moved variables lat_min_guide and lat_max_guide from module
tau2alpha_m to module conf_guide_m.

Removed variables nivsig and nivsigs of module disvert_m. Instead, in
initdynav and initfluxsto, directly wrote arithmetic sequence for
verical axis, pending a better vertical axis. Removed variables nivsig
and nivsigs of "(re)?.start.nc".

In procedure exner_hyb, replaced p(:, :, 1) by equivalent ps.

---

Revision 82 - (view) (annotate) - [select for diffs]
Modified Wed Mar 5 14:57:53 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/src_gcm_only
File length: 3123 byte(s)
Diff to previous 81

Changed all ".f90" suffixes to ".f".

---

Revision 81 - (view) (annotate) - [select for diffs]
Modified Wed Mar 5 14:38:41 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/src_gcm_only
File length: 3699 byte(s)
Diff to previous 79

 Converted to free source form files which were still in fixed source
form. The conversion was done using the polish mode of the NAG Fortran
Compiler.

In addition to converting to free source form, the processing of the
files also:

-- indented the code (including comments);

-- set Fortran keywords to uppercase, and set all other identifiers
to lower case;

-- added qualifiers to end statements (for example "end subroutine
conflx", instead of "end");

-- changed the terminating statements of all DO loops so that each
loop ends with an ENDDO statement (instead of a labeled continue).

---

Revision 79 - (view) (annotate) - [select for diffs]
Modified Fri Feb 28 17:52:47 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/src_gcm_only
File length: 3559 byte(s)
Copied from: trunk/src_no_main_gcm_only revision 78
Diff to previous 78

Moved procedure iniconst inside module comconst. Removed useless
variables of module comconst: im, jm, lllm, imp1, jmp1, lllmm1,
lllmp1, lcl, cotot, unsim. Move definition of dtvr that was in
dynetat0 and etat0 to iniconst. Moved comparison of dtvr from day_step
and start.nc that was in gcm to dynetat0. Moved call to disvert out of
iniconst. Moved call to iniconst in gcm before call to dynetat0.

Removed unused argument pvteta of physiq (not used either in LMDZ).

---

Revision 78 - (view) (annotate) - [select for diffs]
Modified Wed Feb 5 17:51:07 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/src_no_main_gcm_only
File length: 3539 byte(s)
Copied from: trunk/sources_gcm_only revision 77
Diff to previous 76

Moved procedure inigeom into module comgeom.

In disvert, renamed s_sampling to vert_sampling, following
LMDZ. Removed choice strato1. In case read, read ap and bp instead of
s (following LMDZ).

Added argument phis to start_init_orog and start_init_dyn, and removed
variable phis of module start_init_orog_m. In etat0 and
start_init_orog, renamed relief to zmea_2d. In start_init_dyn, renamed
psol to ps.

In start_init_orog, renamed relief_hi to relief. No need to set
phis(iim + 1, :) = phis(1, :), already done in grid_noro.

Documentation for massbar out of SVN, in massbar.txt. Documentation
was duplicated in massdair, but not relevant in massdair.

In conflx, no need to initialize pen_[ud] and pde_[ud]. In flxasc,
used intermediary variable fact (following LMDZ).

In grid_noro, added local variable zmea0 for zmea not smoothed and
computed zphi from zmea instead of zmea0 (following LMDZ). This
changes the results of ce0l.

Removed arguments pen_u and pde_d of phytrac and nflxtr, which were
not used.

---

Revision 76 - (view) (annotate) - [select for diffs]
Modified Fri Nov 15 18:45:49 2013 UTC (10 years, 5 months ago) by guez
Original Path: trunk/sources_gcm_only
File length: 3325 byte(s)
Copied from: trunk/libf/sources_gcm_only revision 75
Diff to previous 72

Moved everything out of libf.

---

Revision 72 - (view) (annotate) - [select for diffs]
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/libf/sources_gcm_only
File length: 3325 byte(s)
Diff to previous 71

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

---

Revision 71 - (view) (annotate) - [select for diffs]
Modified Mon Jul 8 18:12:18 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/libf/sources_gcm_only
File length: 3340 byte(s)
Diff to previous 70

No reason to call inidissip in ce0l.

In inidissip, set random seed to 1 beacuse PGI compiler does not
accept all zeros.

dq was computed needlessly in caladvtrac. Arguments masse and dq of
calfis not used.

Replaced real*8 by double precision.

Pass arrays with inverted order of vertical levels to conflx instead
of creating local variables for this inside conflx.

---

Revision 70 - (view) (annotate) - [select for diffs]
Added Mon Jun 24 15:39:52 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/libf/sources_gcm_only
File length: 3284 byte(s)

In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.

In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".

Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".

In "hgardfou", print only the first temperature out of range found.