[lmdze] Log of /trunk/Compiler

Revision 132 - Directory Listing
Modified Fri Mar 20 16:31:06 2015 UTC (9 years, 1 month ago) by guez
Original Path: trunk/Compilation/Compiler_options

Removed procedure jacobi, which was a copy of the file from Numerical
Recipes in Fortran 77. Refer to the Numer_Rec_95 library instead.

There was a strange line in procedure coordij: j cannot be equal to 0
after the loop on j.

Revision 119 - Directory Listing
Modified Wed Jan 7 14:34:57 2015 UTC (9 years, 3 months ago) by guez
Original Path: trunk/Compilation/Compiler_options

Removed procedure fxyhyper. Useless intermediary between inigeom and
fxhyp, fyhyp. Removed argument yprimv of fyhyp, not used in
inigeom. Downgraded rlonm025 and rlonp025 from arguments to local
variables of fxhyp, not used in inigeom. Downgraded arguments
champmin, champmax of fxhyp and fyhyp to local variables: print them
in fxhyp and fyhyp instead of fxyhyper.

Removed arguments xzoomdeg, grossism, dzooma, tau of fxhyp. Use
directly module variables clon, grossismx, dzoomx, taux instead.

Removed arguments yzoomdeg, grossism, dzooma, tau of fyhyp. Use
directly module variables clat, grossismy, dzoomy, tauy instead.

In procedure yamada4, l0 does not need the save attribute. It is
defined at each call.

Revision 108 - Directory Listing
Modified Tue Sep 16 14:00:41 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/Compilation/Compiler_options

Imported writefield from LMDZ. Close at the end of gcm the files which
were created by writefiled (not done in LMDZ).

Removed procedures for the output of Grads files. Removed calls to
dump2d. In guide, replaced calls to wrgrads by calls to writefield.

In vlspltqs, removed redundant programming of saturation
pressure. Call foeew from module FCTTRE instead.

Bug fix in interpre: size of w exceeding size of correponding actual
argument wg in advtrac.

In leapfrog, call guide until the end of the run, instead of six hours
before the end.

Bug fix in readsulfate_preind: type of arguments.

Revision 103 - Directory Listing
Modified Fri Aug 29 13:00:05 2014 UTC (9 years, 8 months ago) by guez
Original Path: trunk/Compilation/Compiler_options

Renamed module cvparam to cv_param. Deleted procedure
cv_param. Changed variables of module cv_param into parameters.

In procedures cv_driver, cv_uncompress and cv3_uncompress, removed
some arguments giving dimensions and used module variables klon and
klev instead.

In procedures gradiv2, laplacien_gam and laplacien, changed
declarations of local variables because klevel is not always klev.

Removed code for nudging surface pressure.

Removed arguments pim and pjm of tau2alpha. Added assignment of false
to variable first.

Replaced real argument del of procedures foeew and FOEDE by logical
argument.

Revision 97 - Directory Listing
Modified Fri Apr 25 14:58:31 2014 UTC (10 years ago) by guez
Original Path: trunk/Compilation/Compiler_options

Module pressure_var is now only used in gcm. Created local variables
pls and p3d in etat0, added argument p3d to regr_pr_o3.

In leapfrog, moved computation of p3d and exner function immediately
after integrd, for clarity (does not change the execution).

Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra,
tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress;
ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of
cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt,
dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver

Removed argument d_tra and computation of d_tra in concvl. Removed
argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just
set to 0 in cv_driver, associated to d_tra in concvl, and set again to
zero in concvl.

Revision 91 - Directory Listing
Modified Wed Mar 26 17:18:58 2014 UTC (10 years, 1 month ago) by guez

Removed unused variables lock_startdate and time_stamp of module
calendar.

Noticed that physiq does not change the surface pressure. So removed
arguments ps and dpfi of subroutine addfi. dpfi was always 0. The
computation of ps in addfi included some averaging at the poles. In
principle, this does not change ps but in practice it does because of
finite numerical precision. So the results of the simulation are
changed. Removed arguments ps and dpfi of calfis. Removed argument
d_ps of physiq.

du at the poles is not computed by dudv1, so declare only the
corresponding latitudes in dudv1. caldyn passes only a section of the
array dudyn as argument.

Removed variable niadv of module iniadvtrac_m.

Declared arguments of exner_hyb as assumed-shape arrays and made all
other horizontal sizes in exner_hyb dynamic. This allows the external
program test_disvert to use exner_hyb at a single horizontal position.

Revision 85 - Directory Listing
Modified Thu Mar 6 17:35:22 2014 UTC (10 years, 1 month ago) by guez

Removed option to guide surface pressure because it was not
functional: psrea1 was not defined in procedure guide. Removed local
variables psrea1 and psrea2 of procedure guide. ps becomes an
"intent(in)" argument in guide. Removed case guide_p in guide. Removed
variable guide_p of module conf_guide_m. Removed case guide_p and
argument ps in read_reanalyse. Removed case guide_p and argument ps in
reanalyse2nat.

Revision 83 - Directory Listing
Modified Thu Mar 6 15:12:00 2014 UTC (10 years, 1 month ago) by guez

In procedure conf_guide, replaced calls to getpar by reading a
namelist. Removed file getparam.f, now unused. So getin of IOIPSL is
now unused too. Removed files getincom.f, getincom2.f, cmpblank.f,
find_sig.f, gensig.f and nocomma.f.

Moved variables lat_min_guide and lat_max_guide from module
tau2alpha_m to module conf_guide_m.

Removed variables nivsig and nivsigs of module disvert_m. Instead, in
initdynav and initfluxsto, directly wrote arithmetic sequence for
verical axis, pending a better vertical axis. Removed variables nivsig
and nivsigs of "(re)?.start.nc".

In procedure exner_hyb, replaced p(:, :, 1) by equivalent ps.

Revision 79 - Directory Listing
Modified Fri Feb 28 17:52:47 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/Compilers

Moved procedure iniconst inside module comconst. Removed useless
variables of module comconst: im, jm, lllm, imp1, jmp1, lllmm1,
lllmp1, lcl, cotot, unsim. Move definition of dtvr that was in
dynetat0 and etat0 to iniconst. Moved comparison of dtvr from day_step
and start.nc that was in gcm to dynetat0. Moved call to disvert out of
iniconst. Moved call to iniconst in gcm before call to dynetat0.

Removed unused argument pvteta of physiq (not used either in LMDZ).

Revision 78 - Directory Listing
Modified Wed Feb 5 17:51:07 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/Compilers

Moved procedure inigeom into module comgeom.

In disvert, renamed s_sampling to vert_sampling, following
LMDZ. Removed choice strato1. In case read, read ap and bp instead of
s (following LMDZ).

Added argument phis to start_init_orog and start_init_dyn, and removed
variable phis of module start_init_orog_m. In etat0 and
start_init_orog, renamed relief to zmea_2d. In start_init_dyn, renamed
psol to ps.

In start_init_orog, renamed relief_hi to relief. No need to set
phis(iim + 1, :) = phis(1, :), already done in grid_noro.

Documentation for massbar out of SVN, in massbar.txt. Documentation
was duplicated in massdair, but not relevant in massdair.

In conflx, no need to initialize pen_[ud] and pde_[ud]. In flxasc,
used intermediary variable fact (following LMDZ).

In grid_noro, added local variable zmea0 for zmea not smoothed and
computed zphi from zmea instead of zmea0 (following LMDZ). This
changes the results of ce0l.

Removed arguments pen_u and pde_d of phytrac and nflxtr, which were
not used.

Revision 72 - Directory Listing
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/Compilers

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

Revision 71 - Directory Listing
Modified Mon Jul 8 18:12:18 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/Compilers

No reason to call inidissip in ce0l.

In inidissip, set random seed to 1 beacuse PGI compiler does not
accept all zeros.

dq was computed needlessly in caladvtrac. Arguments masse and dq of
calfis not used.

Replaced real*8 by double precision.

Pass arrays with inverted order of vertical levels to conflx instead
of creating local variables for this inside conflx.

Revision 70 - Directory Listing
Modified Mon Jun 24 15:39:52 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/Compilers

In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.

In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".

Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".

In "hgardfou", print only the first temperature out of range found.

Revision 69 - Directory Listing
Modified Mon Feb 18 16:33:12 2013 UTC (11 years, 2 months ago) by guez
Original Path: trunk/Compilers

Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from
module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and
rad_chau2 from module nuagecom to module conf_phys_m.

Read clesphys2_nml from conf_phys instead of gcm.

Removed argument iflag_con from several procedures. Access module
variable instead.

Revision 62 - Directory Listing
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 9 months ago) by guez
Original Path: trunk/Compilers

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 61 - Directory Listing
Modified Fri Apr 20 14:58:43 2012 UTC (12 years ago) by guez
Original Path: trunk/Compilers

No more included file in LMDZE, not even "netcdf.inc".

Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.

Split module "histcom". Assembled resulting files in directory
"Histcom".

Removed aliasing in calls to "laplacien".

Revision 49 - Directory Listing
Modified Wed Aug 24 11:43:14 2011 UTC (12 years, 8 months ago) by guez
Original Path: trunk/Compilers

LMDZE now uses library Jumble.

Removed all calls to "flinget". Replaced calls to "flinget",
"flininfo", "flinopen_nozoom" by calls to NetCDF95 and Jumble.

Split file "cv_driver.f" into "cv_driver.f90", "cv_flag.f90" and
"cv_thermo.f90".

Bug fix: "QANCIEN" was read twice in "phyeytat0".

In "physiq", initialization of "d_t", "d_u", "d_v" was useless.

Revision 38 - Directory Listing
Modified Thu Jan 6 17:52:19 2011 UTC (13 years, 3 months ago) by guez
Original Path: trunk/Compilers

Extracted ASCII art from "inigeom" into a separate text file in the
documentation.

"test_disvert" now creates a separate file for layer thicknesses.

Moved variables from module "yomcst" to module "suphec_m" because this
is where those variables are defined. Kept in "yomcst" only parameters
of Earth orbit. Gave the attribute "parameter" to some variables of
module "suphec_m".

Variables of module "yoethf" were defined in procedure "suphec". Moved
these definitions to a new procedure "yoethf" in module "yoethf_m".

Revision 37 - Directory Listing
Modified Tue Dec 21 15:45:48 2010 UTC (13 years, 4 months ago) by guez
Original Path: trunk/Compilers

Inlined procedure "pression".

Split "guide.f90" into "guide.f90" and "tau2alpha.f90". Split
"read_reanalyse.f" into single-procedure files in directory
"Read_reanalyse".

Useless copy of variables in "iniphysiq". Directly define module
variables in "gcm" and remove procedure "iniphysiq".

Added "pressure-altitude" in "test_disvert".

Revision 33 - Directory Listing
Modified Fri Apr 9 10:56:14 2010 UTC (14 years ago) by guez
Original Path: trunk/Compilers

Test namelist input in procedure "conf_gcm" rather than program unit
"gcm".

Compute "time" in procedure "sortvarc" rather than "leapfrog".

Rewrote "leapfrog" with a single loop on "itau" instead of two nested
loops on number of periodic matsuno-leapfrog cycles and leapfrog
iterations.

Revision 30 - Directory Listing
Modified Thu Apr 1 09:07:28 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/Compilers

Imported Source files of the external library "IOIPSL_Lionel" into
"libf/IOIPSL".

Split "cray.f90" into "scopy.f90" and "ssum.f90".

Rewrote "leapfrog" in order to have a clearer algorithmic structure.

Revision 27 - Directory Listing
Modified Thu Mar 25 14:29:07 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/Compilers

"dyn3d" and "filtrez" do not contain any included file so make rules
have been updated.

"comdissip.f90" was useless, removed it.

"dynredem0" wrote undefined value in "controle(31)", that was
overwritten by "dynredem1". Now "dynredem0" just writes 0 to
"controle(31)".

Removed arguments of "inidissip". "inidissip" now accesses the
variables by use association.

In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote
undefined value to "controle(31)". Added argument "itau" of
"dynredem1" to correct that.

"itaufin" does not need to be a module variable (of "temps"), made it
a local variable of "leapfrog".

Removed calls to "diagedyn" from "leapfrog".

Revision 23 - Directory Listing
Modified Mon Dec 14 15:25:16 2009 UTC (14 years, 4 months ago) by guez
Original Path: trunk/Compilers

Split "orografi.f": one file for each procedure. Put the created files
in new directory "Orography".

Removed argument "vcov" of procedure "sortvarc". Removed arguments
"itau" and "time" of procedure "caldyn0". Removed arguments "itau",
"time" and "vcov" of procedure "sortvarc0".

Removed argument "time" of procedure "dynredem1". Removed NetCDF
variable "temps" in files "start.nc" and "restart.nc", because its
value is always 0.

Removed argument "nq" of procedures "iniadvtrac" and "leapfrog". The
number of "tracers read in "traceur.def" must now be equal to "nqmx",
or "nqmx" must equal 4 if there is no file "traceur.def". Replaced
variable "nq" by constant "nqmx" in "leapfrog".

NetCDF variable for ozone field in "coefoz.nc" must now be called
"tro3" instead of "r".

Fixed bug in "zenang".

Revision 20 - Directory Listing
Modified Wed Oct 15 16:19:57 2008 UTC (15 years, 6 months ago) by guez
Original Path: trunk/Compilers

Deleted argument "presnivs" of "physiq", "ini_histhf", "ini_histhf3d",
"ini_histday", "ini_histins", "ini_histrac", "phytrac". Access it from
"comvert" instead.

Replaced calls to NetCDF Fortran 77 interface by calls to Fortran 90
interface or to NetCDF95.

Procedure "gr_phy_write_3d" now works with a variable of arbitrary
size in the second dimension.

Annotated use statements with "only" clause.

Replaced calls to NetCDF interface version 2 by calls to Fortran 90
interface in "guide.f90" and "read_reanalyse.f".

In "write_histrac", replaced calls to "gr_fi_ecrit" by calls to
"gr_phy_write_2d" and "gr_phy_write_3d".

Revision 15 - Directory Listing
Modified Fri Aug 1 15:24:12 2008 UTC (15 years, 8 months ago) by guez
Original Path: trunk/Compilers

-- Minor modification of input/output:

Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not
modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1",
"ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4"
"mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from
"histrac.nc".

Variable "raz_date" of module "conf_gcm_m" has logical type instead of
integer type.

-- Should not change any result at run time:

Modified calls to "IOIPSL_Lionel" procedures because the interfaces of
these procedures have been simplified.

Changed name of variable in module "start_init_orog_m": "masque" to
"mask".

Created a module containing procedure "phyredem".

Removed arguments "punjours", "pdayref" and "ptimestep" of procedure
"iniphysiq".

Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created
procedure "gr_phy_write_3d".

Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev",
"calcul_divers".

Revision 13 - Directory Listing
Modified Fri Jul 25 19:59:34 2008 UTC (15 years, 9 months ago) by guez
Original Path: trunk/Compilers

-- Minor change of behaviour:

"etat0" does not compute "rugsrel" nor "radpas". Deleted arguments
"radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of
"phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In
"physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program
"etat0_lim" does not use "clesphys2".

-- Minor modification of input/output:

Created subroutine "read_clesphys2". Variables of "clesphys2" are read
in "read_clesphys2" instead of "conf_gcm". "printflag" does not print
variables of "clesphys2".

-- Should not change any result at run time:

References to module "numer_rec" instead of individual modules of
"Numer_rec_Lionel".

Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm",
"leapfrog", "phyetat0". Deleted variable "clesphy0" in
"gcm". "phyetat0" does not modify variables of "clesphys2".

The program unit "gcm" does not modify "itau_phy".

Added some "intent" attributes.

"regr11_lint" does not call "polint".

Revision 12 - Directory Listing
Modified Mon Jul 21 16:05:07 2008 UTC (15 years, 9 months ago) by guez
Original Path: trunk/Compilers

-- Minor modification of input/output:

Created procedure "read_logic". Variables of module "logic" are read
by "read_logic" instead of "conf_gcm". Variable "offline" of module
"conf_gcm" is read from namelist instead of "*.def".

Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0",
"tabcntr0" and local variables "radpas", "tab_cntrl" of
"phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any
longer. "phyetat0" now reads global attribute "itau_phy" from
"startphy.nc". "phyredem" does not create variable "controle" in
"startphy.nc" any longer. "phyredem" now writes global attribute
"itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of
"printflag". Removed diagnostic messages written by "printflag" for
comparison of the variable "controle" of "startphy.nc" and the
variables read from "*.def" or namelist input.

-- Removing unwanted functionality:

Removed variable "lunout" from module "iniprint", replaced everywhere
by standard output.

Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and
"physiq". Removed procedure "interfoce_cpl".

-- Should not change anything at run time:

Automated creation of graphs in documentation. More documentation on
input files.

Converted Fortran files to free format: "phyredem.f90", "printflag.f90".

Split module "clesphy" into "clesphys" and "clesphys2".

Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and
"statcl" from module "logic". Added arguments "conser" to "advect",
"leapf" to "integrd". Added local variables "forward", "leapf",
"apphys", "conser", "apdiss" in "leapfrog".

Added intent attributes.

Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh"
of "phytrac", "dt" of "yamada".

Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0",
"length", "tabcntr0" in "physiq". Replaced all references to "dtime"
by references to "pdtphys".

Revision 11 - Directory Listing
Modified Thu Jun 5 12:43:08 2008 UTC (15 years, 10 months ago) by guez
Original Path: trunk/Compilers

Added option "-lines" for "nag_fcalls95" in "nag_tools.mk".
Added documentation.
Leading spaces removed in "REPLY" in "etat0_lim.sh".
"gcm.sh" does not require "coefoz_LMDZ.nc" to be present.

Revision 10 - Directory Listing
Modified Fri Apr 18 14:45:53 2008 UTC (16 years ago) by guez
Original Path: trunk/Compilers

Added NetCDF directory "/home/guez/include" in "g95.mk" and
"nag_tools.mk".

Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac",
"calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec",
"calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3",
"conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2",
"drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell".

Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo"
and messages for end of run from "abort_gcm" to "gcm"; replaced call
to "abort_gcm" in "leapfrog" by exit from outer loop.

In "calfis": removed argument "pp" and variable "unskap"; changed
"pksurcp" from scalar to rank 2; use "pressure_var"; rewrote
computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy";
added computation of "pls".

Removed unused variable in "dynredem0".

In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call
to "ssum" by call to "sum"; removed variables "xpn" and "xps";
replaced some loops by array expressions.

In "leapfrog": use "pressure_var"; deleted variables "p", "longcles".

Converted common blocks "YOECUMF", "YOEGWD" to modules.

Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr".

Created module "raddimlw" from include file "raddimlw.h".

Corrected call to "new_unit" in "test_disvert".

Revision 7 - Directory Listing
Modified Mon Mar 31 12:24:17 2008 UTC (16 years, 1 month ago) by guez
Original Path: trunk/Compilers

This revision is not in working order. Pending some moving of files.

Important changes. In the program "etat0_lim": ozone coefficients from
Mobidic are regridded in time instead of pressure ; consequences in
"etat0". In the program "gcm", ozone coefficients from Mobidic are
read once per day only for the current day and regridded in pressure ;
consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and
"regr_pr_comb_coefoz_m".

NetCDF95 is a library and does not export NetCDF.

New variables "nag_gl_options", "nag_fcalls_options" and
"nag_cross_options" in "nag_tools.mk".

"check_coefoz.jnl" rewritten entirely for new version of
"coefoz_LMDZ.nc".

Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk".

Added some "intent" attributes in "calfis", "clmain", "clqh",
"cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD",
"nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind"
and "undefSTD".

In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of
1. "phis" has assumed shape in "dynredem0".

Added module containing "dynredem0". Changed some calls with NetCDF
Fortran 77 interface to calls with NetCDF95 interface.

Replaced calls to "ssum" by calls to "sum" in "inigeom".

In "make.sh", new option "-c" to change compiler.

In "aaam_bud", argument "rjour" deleted.

In "physiq": renamed some variables; deleted variable "xjour".

In "phytrac": renamed some variables; new argument "lmt_pas".

	ViewVC Help
Powered by ViewVC 1.1.21

Log of /trunk/Compiler_options