[lmdze] Log of /trunk/Compiler_options/gfortran

Revision 191 - (view) (annotate) - [select for diffs]
Modified Mon May 9 19:56:28 2016 UTC (8 years ago) by guez
File length: 1326 byte(s)
Diff to previous 186

Extracted the call to read_comdissnew out of conf_gcm.

Made ok_instan a variable of module clesphys, itau_phy a variable of
module phyetat0_m, nid_ins a variable of module ini_histins_m, itap a
variable of new module time_phylmdz, so that histwrite_phy can be
called from any procedure without the need to cascade those variables
into that procedure. Made itau_w a variable of module time_phylmdz so
that it is computed only once per time step of physics.

Extracted variables of module clesphys which were in namelist
conf_phys_nml into their own namelist, clesphys_nml, and created
procedure read_clesphys reading clesphys_nml, to avoid side effect.

No need for double precision in procedure getso4fromfile. Assume there
is a single variable for the whole year in the NetCDF file instead of
one variable per month.

Created generic procedure histwrite_phy and removed procedure
write_histins, following LMDZ. histwrite_phy has only two arguments,
can be called from anywhere, and should manage the logic of writing or
not writing into various history files with various operations. So the
test on ok_instan goes inside histwrite_phy.

Test for raz_date in phyetat0 instead of physiq to avoid side effect.

Created procedure increment_itap to avoid side effect.

Removed unnecessary differences between procedures readsulfate and
readsulfate_pi.

Revision 186 - (view) (annotate) - [select for diffs]
Modified Mon Mar 21 15:36:26 2016 UTC (8 years, 1 month ago) by guez
File length: 1324 byte(s)
Diff to previous 168

Removed variables nlm and nlp of module cv30_param_m. We do not
believe much in the benefit of these intermediary variables so we go
for clarity.

Removed variable noff of module cv30_param_m. Never used anywhere
else. Just set the value of nl explicitly in cv30_param.

Removed argument nd of cv30_param. Only called with nd = klev.

Replaced calls to zilch by array assignments. There was a strange
double call to zilch with the same arguments in cv30_mixing.

Removed procedure cv_flag. Just set the value of variable cvflag_grav
of module cvflag at declaration.

Revision 168 - (view) (annotate) - [select for diffs]
Modified Wed Sep 9 10:41:47 2015 UTC (8 years, 8 months ago) by guez
File length: 1286 byte(s)
Diff to previous 135

In order to be able to choose finer resolutions, set large memory
model in compiler options and use dynamic libraries.

Variables rlatd, rlond, cuphy and cvphy of module comgeomphy were
never used. (In LMDZ, they are used only for Orchid.)

There is a bug in PGI Fortran 13.10 that does not accept the
combination of forall, pack and spread in regr_pr_av and
regr_pr_int. In order to circumvent this bug, created the function
gr_dyn_phy.

In program test_inifilr, use a single latitude coordinate for north
and south.

Revision 132 - (view) (annotate) - [select for diffs]
Modified Fri Mar 20 16:31:06 2015 UTC (9 years, 1 month ago) by guez
Original Path: trunk/Compilation/Compiler_options/gfortran_debug.mk
File length: 1154 byte(s)
Diff to previous 119

Removed procedure jacobi, which was a copy of the file from Numerical
Recipes in Fortran 77. Refer to the Numer_Rec_95 library instead.

There was a strange line in procedure coordij: j cannot be equal to 0
after the loop on j.

Revision 119 - (view) (annotate) - [select for diffs]
Modified Wed Jan 7 14:34:57 2015 UTC (9 years, 4 months ago) by guez
Original Path: trunk/Compilation/Compiler_options/gfortran_debug.mk
File length: 1165 byte(s)
Diff to previous 94

Removed procedure fxyhyper. Useless intermediary between inigeom and
fxhyp, fyhyp. Removed argument yprimv of fyhyp, not used in
inigeom. Downgraded rlonm025 and rlonp025 from arguments to local
variables of fxhyp, not used in inigeom. Downgraded arguments
champmin, champmax of fxhyp and fyhyp to local variables: print them
in fxhyp and fyhyp instead of fxyhyper.

Removed arguments xzoomdeg, grossism, dzooma, tau of fxhyp. Use
directly module variables clon, grossismx, dzoomx, taux instead.

Removed arguments yzoomdeg, grossism, dzooma, tau of fyhyp. Use
directly module variables clat, grossismy, dzoomy, tauy instead.

In procedure yamada4, l0 does not need the save attribute. It is
defined at each call.

Revision 94 - (view) (annotate) - [select for diffs]
Modified Tue Apr 1 17:27:47 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/Compilation/Compiler_options/gfortran_debug.mk
File length: 1149 byte(s)
Diff to previous 85

Grouped compilation files into directory Compilation.

Revision 85 - (view) (annotate) - [select for diffs]
Modified Thu Mar 6 17:35:22 2014 UTC (10 years, 2 months ago) by guez
File length: 1149 byte(s)
Diff to previous 83

Removed option to guide surface pressure because it was not
functional: psrea1 was not defined in procedure guide. Removed local
variables psrea1 and psrea2 of procedure guide. ps becomes an
"intent(in)" argument in guide. Removed case guide_p in guide. Removed
variable guide_p of module conf_guide_m. Removed case guide_p and
argument ps in read_reanalyse. Removed case guide_p and argument ps in
reanalyse2nat.

Revision 83 - (view) (annotate) - [select for diffs]
Modified Thu Mar 6 15:12:00 2014 UTC (10 years, 2 months ago) by guez
File length: 1170 byte(s)
Diff to previous 82

In procedure conf_guide, replaced calls to getpar by reading a
namelist. Removed file getparam.f, now unused. So getin of IOIPSL is
now unused too. Removed files getincom.f, getincom2.f, cmpblank.f,
find_sig.f, gensig.f and nocomma.f.

Moved variables lat_min_guide and lat_max_guide from module
tau2alpha_m to module conf_guide_m.

Removed variables nivsig and nivsigs of module disvert_m. Instead, in
initdynav and initfluxsto, directly wrote arithmetic sequence for
verical axis, pending a better vertical axis. Removed variables nivsig
and nivsigs of "(re)?.start.nc".

In procedure exner_hyb, replaced p(:, :, 1) by equivalent ps.

Revision 79 - (view) (annotate) - [select for diffs]
Modified Fri Feb 28 17:52:47 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/Compilers/gfortran_debug.mk
File length: 1180 byte(s)
Diff to previous 78

Moved procedure iniconst inside module comconst. Removed useless
variables of module comconst: im, jm, lllm, imp1, jmp1, lllmm1,
lllmp1, lcl, cotot, unsim. Move definition of dtvr that was in
dynetat0 and etat0 to iniconst. Moved comparison of dtvr from day_step
and start.nc that was in gcm to dynetat0. Moved call to disvert out of
iniconst. Moved call to iniconst in gcm before call to dynetat0.

Removed unused argument pvteta of physiq (not used either in LMDZ).

Revision 78 - (view) (annotate) - [select for diffs]
Modified Wed Feb 5 17:51:07 2014 UTC (10 years, 3 months ago) by guez
Original Path: trunk/Compilers/gfortran_debug.mk
File length: 1188 byte(s)
Diff to previous 72

Moved procedure inigeom into module comgeom.

In disvert, renamed s_sampling to vert_sampling, following
LMDZ. Removed choice strato1. In case read, read ap and bp instead of
s (following LMDZ).

Added argument phis to start_init_orog and start_init_dyn, and removed
variable phis of module start_init_orog_m. In etat0 and
start_init_orog, renamed relief to zmea_2d. In start_init_dyn, renamed
psol to ps.

In start_init_orog, renamed relief_hi to relief. No need to set
phis(iim + 1, :) = phis(1, :), already done in grid_noro.

Documentation for massbar out of SVN, in massbar.txt. Documentation
was duplicated in massdair, but not relevant in massdair.

In conflx, no need to initialize pen_[ud] and pde_[ud]. In flxasc,
used intermediary variable fact (following LMDZ).

In grid_noro, added local variable zmea0 for zmea not smoothed and
computed zphi from zmea instead of zmea0 (following LMDZ). This
changes the results of ce0l.

Removed arguments pen_u and pde_d of phytrac and nflxtr, which were
not used.

Revision 72 - (view) (annotate) - [select for diffs]
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/Compilers/gfortran_debug.mk
File length: 1128 byte(s)
Diff to previous 71

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

Revision 71 - (view) (annotate) - [select for diffs]
Modified Mon Jul 8 18:12:18 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/Compilers/gfortran_debug.mk
File length: 1166 byte(s)
Diff to previous 70

No reason to call inidissip in ce0l.

In inidissip, set random seed to 1 beacuse PGI compiler does not
accept all zeros.

dq was computed needlessly in caladvtrac. Arguments masse and dq of
calfis not used.

Replaced real*8 by double precision.

Pass arrays with inverted order of vertical levels to conflx instead
of creating local variables for this inside conflx.

Revision 70 - (view) (annotate) - [select for diffs]
Modified Mon Jun 24 15:39:52 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/Compilers/gfortran_debug.mk
File length: 1086 byte(s)
Diff to previous 69

In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.

In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".

Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".

In "hgardfou", print only the first temperature out of range found.

Revision 69 - (view) (annotate) - [select for diffs]
Modified Mon Feb 18 16:33:12 2013 UTC (11 years, 2 months ago) by guez
Original Path: trunk/Compilers/gfortran_debug.mk
File length: 1080 byte(s)
Copied from: trunk/Compilers/gfortran.mk revision 66
Diff to previous 62

Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from
module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and
rad_chau2 from module nuagecom to module conf_phys_m.

Read clesphys2_nml from conf_phys instead of gcm.

Removed argument iflag_con from several procedures. Access module
variable instead.

Revision 62 - (view) (annotate) - [select for diffs]
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 9 months ago) by guez
Original Path: trunk/Compilers/gfortran.mk
File length: 1041 byte(s)
Diff to previous 61

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 61 - (view) (annotate) - [select for diffs]
Modified Fri Apr 20 14:58:43 2012 UTC (12 years ago) by guez
Original Path: trunk/Compilers/gfortran.mk
File length: 1043 byte(s)
Diff to previous 48

No more included file in LMDZE, not even "netcdf.inc".

Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.

Split module "histcom". Assembled resulting files in directory
"Histcom".

Removed aliasing in calls to "laplacien".

Revision 48 - (view) (annotate) - [select for diffs]
Modified Tue Jul 19 12:54:20 2011 UTC (12 years, 9 months ago) by guez
Original Path: trunk/Compilers/gfortran.mk
File length: 1143 byte(s)
Diff to previous 47

Replaced calls to "flinget" by calls to "NetCDF95".

Revision 47 - (view) (annotate) - [select for diffs]
Modified Fri Jul 1 15:00:48 2011 UTC (12 years, 10 months ago) by guez
Original Path: trunk/Compilers/gfortran.mk
File length: 1143 byte(s)
Diff to previous 38

Split "thermcell.f" and "cv3_routines.f".
Removed copies of files that are now in "L_util".
Moved "mva9" and "diagetpq" to their own files.
Unified variable names across procedures.

Revision 38 - (view) (annotate) - [select for diffs]
Modified Thu Jan 6 17:52:19 2011 UTC (13 years, 4 months ago) by guez
Original Path: trunk/Compilers/gfortran.mk
File length: 1065 byte(s)
Diff to previous 37

Extracted ASCII art from "inigeom" into a separate text file in the
documentation.

"test_disvert" now creates a separate file for layer thicknesses.

Moved variables from module "yomcst" to module "suphec_m" because this
is where those variables are defined. Kept in "yomcst" only parameters
of Earth orbit. Gave the attribute "parameter" to some variables of
module "suphec_m".

Variables of module "yoethf" were defined in procedure "suphec". Moved
these definitions to a new procedure "yoethf" in module "yoethf_m".

Revision 37 - (view) (annotate) - [select for diffs]
Modified Tue Dec 21 15:45:48 2010 UTC (13 years, 4 months ago) by guez
Original Path: trunk/Compilers/gfortran.mk
File length: 1071 byte(s)
Diff to previous 36

Inlined procedure "pression".

Split "guide.f90" into "guide.f90" and "tau2alpha.f90". Split
"read_reanalyse.f" into single-procedure files in directory
"Read_reanalyse".

Useless copy of variables in "iniphysiq". Directly define module
variables in "gcm" and remove procedure "iniphysiq".

Added "pressure-altitude" in "test_disvert".

Revision 36 - (view) (annotate) - [select for diffs]
Added Thu Dec 2 17:11:04 2010 UTC (13 years, 5 months ago) by guez
Original Path: trunk/Compilers/gfortran.mk
File length: 1084 byte(s)

Now using the library "NR_util".

This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.

	ViewVC Help
Powered by ViewVC 1.1.21

Log of /trunk/Compiler_options/gfortran_debug.mk