Parent Directory | Revision Log
Sticky Revision: |
Changed all ".f90" suffixes to ".f".
Converted to free source form files which were still in fixed source form. The conversion was done using the polish mode of the NAG Fortran Compiler. In addition to converting to free source form, the processing of the files also: -- indented the code (including comments); -- set Fortran keywords to uppercase, and set all other identifiers to lower case; -- added qualifiers to end statements (for example "end subroutine conflx", instead of "end"); -- changed the terminating statements of all DO loops so that each loop ends with an ENDDO statement (instead of a labeled continue).
Moved procedure iniconst inside module comconst. Removed useless variables of module comconst: im, jm, lllm, imp1, jmp1, lllmm1, lllmp1, lcl, cotot, unsim. Move definition of dtvr that was in dynetat0 and etat0 to iniconst. Moved comparison of dtvr from day_step and start.nc that was in gcm to dynetat0. Moved call to disvert out of iniconst. Moved call to iniconst in gcm before call to dynetat0. Removed unused argument pvteta of physiq (not used either in LMDZ).
Moved procedure inigeom into module comgeom. In disvert, renamed s_sampling to vert_sampling, following LMDZ. Removed choice strato1. In case read, read ap and bp instead of s (following LMDZ). Added argument phis to start_init_orog and start_init_dyn, and removed variable phis of module start_init_orog_m. In etat0 and start_init_orog, renamed relief to zmea_2d. In start_init_dyn, renamed psol to ps. In start_init_orog, renamed relief_hi to relief. No need to set phis(iim + 1, :) = phis(1, :), already done in grid_noro. Documentation for massbar out of SVN, in massbar.txt. Documentation was duplicated in massdair, but not relevant in massdair. In conflx, no need to initialize pen_[ud] and pde_[ud]. In flxasc, used intermediary variable fact (following LMDZ). In grid_noro, added local variable zmea0 for zmea not smoothed and computed zphi from zmea instead of zmea0 (following LMDZ). This changes the results of ce0l. Removed arguments pen_u and pde_d of phytrac and nflxtr, which were not used.
Moved everything out of libf.
Flincom is not used any longer.
Renamed tpot to teta and psol to ps in etat0. Replaced calls to flincom by calls to NetCDF95 in startdyn. lon_ini, lat_ini and levdyn_ini are now pointers.
No reason to call inidissip in ce0l. In inidissip, set random seed to 1 beacuse PGI compiler does not accept all zeros. dq was computed needlessly in caladvtrac. Arguments masse and dq of calfis not used. Replaced real*8 by double precision. Pass arrays with inverted order of vertical levels to conflx instead of creating local variables for this inside conflx.
In procedure, "addfi" access directly the module variable "dtphys" instead of going through an argument. In "conflx", do not create a local variable for temperature with reversed order of vertical levels. Instead, give an actual argument with reversed order in "physiq". Changed names of variables "rmd" and "rmv" from module "suphec_m" to "md" and "mv". In "hgardfou", print only the first temperature out of range found.
Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and rad_chau2 from module nuagecom to module conf_phys_m. Read clesphys2_nml from conf_phys instead of gcm. Removed argument iflag_con from several procedures. Access module variable instead.
Split "flincom.f90" into "flinclo.f90", "flinfindcood.f90", "flininfo.f90" and "flinopen_nozoom.f90", in directory "IOIPSL/Flincom". Renamed "etat0_lim" to "ce0l", as in LMDZ. Split "readsulfate.f" into "readsulfate.f90", "readsulfate_preind.f90" and "getso4fromfile.f90". In etat0, renamed variable q3d to q, as in "dynredem1". Replaced calls to Flicom procedures by calls to NetCDF95. In leapfrog, added call to writehist. Extracted ASCII art from "grid_noro" into a file "grid_noro.txt". Transformed explicit-shape local arrays into automatic arrays, so that test on values of iim and jjm is no longer needed. Test on weight: IF (weight(ii, jj) /= 0.) THEN is useless. There is already a test before: if (any(weight == 0.)) stop "zero weight in grid_noro" In "aeropt", replaced duplicated lines with different values of inu by a loop on inu. Removed arguments of "conf_phys". Corresponding variables are now defined in "physiq", in a namelist. In "conf_phys", read a namelist instead of using getin.
Cleaning.
Changed name of module "comvert" to "disvert_m". Changed constant 1. to 0.3 in vertical sampling "strato".
Removed unused procedure "divgrad". In procedure "dissip", save memory by using intermediary arrays "gdx" and "gdy" several times instead of additional array "grx" and "gry". In procedure "inidissip", write "dtdiss * teta*" instead of "teta*". In "comvert", change name of s_sampling from "LMD5" to "tropo" and from "strato2" to "strato".
Removed variable lstardis in module comdissnew and procedures gradiv and nxgrarot. lstardir had to be true. gradiv and nxgrarot were called if lstardis was false. Removed argument iter of procedure filtreg. iter had to be 1. gradiv and nxgrarot called filtreg with iter == 2. Moved procedure flxsetup into module yoecumf. Module yoecumf is only used in program units of directory Conflx, moved it there.
Superficial changes
Changed handling of compiler in compilation system. Removed the prefix letters "y", "p", "t" or "z" in some names of variables. Replaced calls to NetCDF by calls to NetCDF95. Extracted "ioget_calendar" procedures from "calendar.f90" into a separate file. Extracted to a separate file, "mathop2.f90", procedures that were not part of the generic interface "mathop" in "mathop.f90". Removed computation of "dq" in "bilan_dyn", which was not used. In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not compatible with declarations of array sizes. In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed the size of some arrays from "klon" to "knon". Removed possible call to "conema3" in "physiq". Removed unused argument "cd" in "yamada".
No more included file in LMDZE, not even "netcdf.inc". Created a variable containing the list of common source files in GNUmakefile. So we now also see clearly files that are specific to each program. Split module "histcom". Assembled resulting files in directory "Histcom". Removed aliasing in calls to "laplacien".
Useless copies into "gdx" and "gdy" in "gradiv2".
Write used namelists to file "" instead of standard output. Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate dimension to arrays so they have rank 3, like the dummy arguments in "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Extract the initialization part from "bilan_dyn" and make a separate procedure, "init_dynzon", from it. Move variables from modules "iniprint" and "logic" to module "conf_gcm_m". Promote internal procedures of "fxy" to private procedures of module "fxy_m". Extracted documentation from "inigeom". Removed useless "save" attributes. Removed useless intermediate variables. Extracted processing of poles from loop on latitudes. Write coordinates to file "longitude_latitude.txt" instead of standard output. Do not use ozone tracer for radiative transfer.
Imported "writehist.f" from LMDZ. Moved module variable "histaveid" from "com_io_dyn" to "initdynav_m". In "inithist", access directly module variables from "com_io_dyn" instead of going through the arguments. Copying from LMDZ, write "u" and scalar variables to separate files. Create a new variable for the new file in "com_io_dyn". Copying from LMDZ, change the vertical axes of the three files. Removed some useless initializations in "dissip". In "bilan_dyn", removed useless variable "time". Avoiding the approximate test on "dt_cum" being a multiple of "dt_app", just compute "ncum" from known usage of "bilan_dyn" and compute "dt_cum" from "ncum". Change "periodav" from real to integer in "conf_gcm_m". Since "day_step" is required to be a multiple of "iperiod", so is "ncum".
-- In procedure "bilan_dyn", replaced average of "zvq" by integral of "zvq", following a comment of Francis Codron : Le calcul actuel donne des unités peu pratiques : transports de chaleur en K m / s par exemple. C'est bien pour les sorties à 2 dimensions, latitude et pression, car alors le transport ne dépend pas de l'espacement des niveaux, mieux pour comparer ou tracer en latitude et pression. Par contre, quand on somme sur la verticale, on préfèrerait avoir des transports d'énergie en watts, ou au moins an K kg / s (à multiplier par "Cp" ou "L"). On doit pouvoir recalculer le transport intégré à partir des fichiers de sortie, mais c'est embêtant (calcul de "cv"). -- Gathered files in directory Dissipation.
Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1" in "inidissip" by calls to intrinsic procedures. Split file "interface_surf.f90" into a file with a module containing only variables, "interface_surf", and single-procedure files. Gathered files into directory "Interface_surf". Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to "divgrad2" and "divgrad", and "crot" to "nxgraro2" and "nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot" from module "inidissip_m", so it can pass them to "gradiv2", etc. Thanks to this modification, we avoid a circular dependency betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by "gradiv2", for instance, during computation of eigenvalues is not the value "cdivu" computed by "inidissip". Extracted procedure "start_inter_3d" from module "startdyn", to its own module. In "inidissip", unrolled loop on "ii". I find it clearer now. Moved variables "matriceun", "matriceus", "matricevn", "matricevs", "matrinvn" and "matrinvs" from module "parafilt" to module "inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu", "jfiltsv" from module "coefils" to module "inifilr_m".
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
Split "getincom.f90" into "getincom.f90" and "getincom2.f90". Split "nuage.f" into "nuage.f90", "diagcld1.f90" and "diagcld2.f90". Created module "chem" from included file "chem.h". Moved "YOEGWD.f90" to directory "Orography". In "physiq", for evaporation of water, "zlsdcp" was equal to "zlvdc". Removed useless variables.
LMDZE now uses library Jumble. Removed all calls to "flinget". Replaced calls to "flinget", "flininfo", "flinopen_nozoom" by calls to NetCDF95 and Jumble. Split file "cv_driver.f" into "cv_driver.f90", "cv_flag.f90" and "cv_thermo.f90". Bug fix: "QANCIEN" was read twice in "phyeytat0". In "physiq", initialization of "d_t", "d_u", "d_v" was useless.
Replaced calls to "flinget" by calls to "NetCDF95".
Split "thermcell.f" and "cv3_routines.f". Removed copies of files that are now in "L_util". Moved "mva9" and "diagetpq" to their own files. Unified variable names across procedures.
Removed procedure "psextbar". "psextbar" was called but the result of the call was not used.
Split file "histwrite.f90" into "histwrite.f90", "histwrite_real.f90" and "histvar_seq.f90". Extracted documentation from "psextbar.f" into "psextbar.txt" (out of SVN).
Removed argument "pdteta" of "calfis", because it was not used. Created module "conf_guide_m", containing procedure "conf_guide". Moved module variables from "guide_m" to "conf_guide_m". In module "getparam", removed "ini_getparam" and "fin_getparam" from generic interface "getpar". Created module variables in "tau2alpha_m" to replace common "comdxdy".
"start_init_phys" is now called directly by "etat0" instead of through "start_init_dyn". "qsol_2d" is no longer a variable of module "start_init_phys_m", it is an argument of "start_init_phys". "start_init_dyn" now receives "tsol_2d" from "etat0". Split file "vlspltqs.f" into "vlspltqs.f90", "vlxqs.f90" and ""vlyqs.f90". In "start_init_orog", replaced calls to "flin*" by calls to NetCDF95.
Removed programs "test_inter_barxy" and "test_disvert". Added option "read" for "s_sampling" in "disvert".
"alpha" useless, always 0, in "exner_hyb".
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
Inlined procedure "pression". Split "guide.f90" into "guide.f90" and "tau2alpha.f90". Split "read_reanalyse.f" into single-procedure files in directory "Read_reanalyse". Useless copy of variables in "iniphysiq". Directly define module variables in "gcm" and remove procedure "iniphysiq". Added "pressure-altitude" in "test_disvert".
Now using the library "NR_util".
Split "ini_hist.f90" into single-procedure files. In "calfis" and "physiq", removed dummy argument "nq" since "nq" must be equal to "nqmx". In "calfis", renamed dummy argument "pq" to "q", same name as actual argument in "leapfrog". Renamed local variable "zqfi" to "qx", same name as dummy argument in "physiq". Removed arguments "itop_con" and "ibas_con" of "phytrac", which were not used.
Test namelist input in procedure "conf_gcm" rather than program unit "gcm". Compute "time" in procedure "sortvarc" rather than "leapfrog". Rewrote "leapfrog" with a single loop on "itau" instead of two nested loops on number of periodic matsuno-leapfrog cycles and leapfrog iterations.
Split "stringop.f90" into single-procedure files. Gathered files in directory "IOIPSL/Stringop". Split "flincom.f90" into "flincom.f90" and "flinget.f90". Removed unused procedures from module "flincom". Removed unused argument "filename" of procedure "flinopen_nozoom". Removed unused files. Split "grid_change.f90" into "grid_change.f90" and "gr_phy_write_3d.f90". Removed unused procedures from modules "calendar", "ioipslmpp", "grid_atob", "gath_cpl" and "getincom". Removed unused procedures in files "ppm3d.f" and "thermcell.f". Split "mathelp.f90" into "mathelp.f90" and "mathop.f90". Removed unused variable "dpres" of module "comvert". Use argument "itau" instead of local variables "iadvtr" and "first" to control algorithm in procedure "fluxstokenc". Removed unused arguments of procedure "integrd". Removed useless computations at the end of procedure "leapfrog". Merged common block "matrfil" into module "parafilt".
Split "vlsplt.f" in single-procedure files. Gathered the files in directory "dyn3d/Vlsplt". Defined "pbarum(:, 1, :)" and "pbarum(:, jjm + 1, :)" in procedure "groupe".
Imported Source files of the external library "IOIPSL_Lionel" into "libf/IOIPSL". Split "cray.f90" into "scopy.f90" and "ssum.f90". Rewrote "leapfrog" in order to have a clearer algorithmic structure.
Removed unused "diagedyn.f" and "undefSTD.f". In "etat0", the variable "dt" of module "temps" was defined from "landicered.nc", which was meaningless and useless. Replaced "dt" by a local trash variable. Removed variable "dt" from module "temps" and created instead a local variable of "leapfrog" and an argument of "integrd".
"dyn3d" and "filtrez" do not contain any included file so make rules have been updated. "comdissip.f90" was useless, removed it. "dynredem0" wrote undefined value in "controle(31)", that was overwritten by "dynredem1". Now "dynredem0" just writes 0 to "controle(31)". Removed arguments of "inidissip". "inidissip" now accesses the variables by use association. In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote undefined value to "controle(31)". Added argument "itau" of "dynredem1" to correct that. "itaufin" does not need to be a module variable (of "temps"), made it a local variable of "leapfrog". Removed calls to "diagedyn" from "leapfrog".
Moved variable "dtdiss" from module "comconst", variable "idissip" from module "conf_gcm_m" and all variables from module "comdissipn" to module "inidissip_m". "inidissip" creates file "inidissip.csv". "idissip" is no longer read from a namelist. Removed useless computation of "dtdiss" in procedure "iniconst".
Simplified "etat0_lim.sh" and "gcm.sh" because the full versions depended on personal arrangements for directories and machines. Translated included files into modules. Encapsulated procedures into modules. Moved variables from module "comgeom" to local variables of "inigeom". Deleted some unused variables in "comgeom". Moved variable "day_ini" from module "temps" to module "dynetat0_m". Removed useless test on variable "time" and useless "close" statement in procedure "leapfrog". Removed useless call to "inigeom" in procedure "limit".
Created directory "phylmd/Radlwsw". Split "radlwsw.f" in files containing a single procedure. Removed variable "itaufinp1" in "leapfrog".
Split "orografi.f": one file for each procedure. Put the created files in new directory "Orography". Removed argument "vcov" of procedure "sortvarc". Removed arguments "itau" and "time" of procedure "caldyn0". Removed arguments "itau", "time" and "vcov" of procedure "sortvarc0". Removed argument "time" of procedure "dynredem1". Removed NetCDF variable "temps" in files "start.nc" and "restart.nc", because its value is always 0. Removed argument "nq" of procedures "iniadvtrac" and "leapfrog". The number of "tracers read in "traceur.def" must now be equal to "nqmx", or "nqmx" must equal 4 if there is no file "traceur.def". Replaced variable "nq" by constant "nqmx" in "leapfrog". NetCDF variable for ozone field in "coefoz.nc" must now be called "tro3" instead of "r". Fixed bug in "zenang".
Superficial modifications
Inlined procedures "regr_pr_av" and "regr_pr_int" in "regr_pr_o3", "regr_pr_av_coefoz" and "regr_pr_int_coefoz".
In module "regr_pr", rewrote scanning of horizontal positions as a single set of loops, using a mask. Added some "intent" attributes. In "dynredem0", replaced calls to Fortran 77 interface of NetCDF by calls to NetCDF95. Removed calls to "nf_redef", regrouped all writing operations. In "dynredem1", replaced some calls to Fortran 77 interface of NetCDF by calls to Fortran 90 interface. Renamed variable "nqmax" to "nq_phys". In "physiq", if "nq >= 5" then "wo" is computed from the parameterization of "Cariolle".
Created rule for "compare_sampl_*" files in "Documentation/Manuel_LMDZE.texfol/Graphiques/GNUmakefile". Extracted "qcheck", "radiornpb", "minmaxqfi" into separate files. Read pressure coordinate of ozone coefficients once per run instead of every day. Added some "intent" attributes. Added argument "nq" to "ini_histday". Replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d". "Sigma_O3_Royer" is written to "histday.nc" only if "nq >= 4". Moved "ini_histrac" to module "ini_hist". Compute "zmasse" in "physiq", pass it to "phytrac". Removed computations of "pftsol*" and "ppsrf*" in "phytrac". Do not use variable "rg" from module "YOMCST" in "TLIFT".
-- Minor modification of input/output: Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1", "ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4" "mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from "histrac.nc". Variable "raz_date" of module "conf_gcm_m" has logical type instead of integer type. -- Should not change any result at run time: Modified calls to "IOIPSL_Lionel" procedures because the interfaces of these procedures have been simplified. Changed name of variable in module "start_init_orog_m": "masque" to "mask". Created a module containing procedure "phyredem". Removed arguments "punjours", "pdayref" and "ptimestep" of procedure "iniphysiq". Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created procedure "gr_phy_write_3d". Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev", "calcul_divers".
-- Minor change of behaviour: "etat0" does not compute "rugsrel" nor "radpas". Deleted arguments "radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of "phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In "physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program "etat0_lim" does not use "clesphys2". -- Minor modification of input/output: Created subroutine "read_clesphys2". Variables of "clesphys2" are read in "read_clesphys2" instead of "conf_gcm". "printflag" does not print variables of "clesphys2". -- Should not change any result at run time: References to module "numer_rec" instead of individual modules of "Numer_rec_Lionel". Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm", "leapfrog", "phyetat0". Deleted variable "clesphy0" in "gcm". "phyetat0" does not modify variables of "clesphys2". The program unit "gcm" does not modify "itau_phy". Added some "intent" attributes. "regr11_lint" does not call "polint".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
New variables "*_dir" in "g95.mk". Corrected some bugs: "etat0_lim" works, but not "gcm".
This revision is not in working order. Pending some moving of files. Important changes. In the program "etat0_lim": ozone coefficients from Mobidic are regridded in time instead of pressure ; consequences in "etat0". In the program "gcm", ozone coefficients from Mobidic are read once per day only for the current day and regridded in pressure ; consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and "regr_pr_comb_coefoz_m". NetCDF95 is a library and does not export NetCDF. New variables "nag_gl_options", "nag_fcalls_options" and "nag_cross_options" in "nag_tools.mk". "check_coefoz.jnl" rewritten entirely for new version of "coefoz_LMDZ.nc". Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk". Added some "intent" attributes in "calfis", "clmain", "clqh", "cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD", "nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind" and "undefSTD". In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of 1. "phis" has assumed shape in "dynredem0". Added module containing "dynredem0". Changed some calls with NetCDF Fortran 77 interface to calls with NetCDF95 interface. Replaced calls to "ssum" by calls to "sum" in "inigeom". In "make.sh", new option "-c" to change compiler. In "aaam_bud", argument "rjour" deleted. In "physiq": renamed some variables; deleted variable "xjour". In "phytrac": renamed some variables; new argument "lmt_pas".
Created module from included file parafilt. Converted caldyn0 to free format. Added a rule to create cross-references with NAG. Added optional attribute in iniadvtrac. Suppressed argument nq in dynredem0 and dynredem1, using nqmx instead. Replaced some NetCDF calls by netcdf95 calls in dynredem0. Added intent attribute in dynredem0 and dynredem1. Annotated use statements with only clause, in dynredem1. Suppressed variable nq and argument of iniadvtrac in etat0. Added test on nqmx in etat0.
Cosmetic changes
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.21 |