Parent Directory
| 
Revision Log
| Sticky Revision: |
Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos, buffer, regular from module histcom_var to modules where they are defined. Removed procedure ioipslmpp, useless for a sequential program. Added argument datasz_max to histwrite_real (to avoid circular dependency with histwrite). Removed useless variables and computations everywhere. Changed real litteral constants from default kind to double precision in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu. Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of orosetup. Added output of relative humidity.
rlon[uv] and rlat[uv] are already in start.nc. Just encapsulated covcont in a module. finvmaold was not used in leapfrog. Downgraded it from dummy argument to local variable of SUBROUTINE integrd. Simplified handling of mass in integrd: down from five 3-dimensional arrays (masse, massem1, finvmaold, massescr and finvmasse) to three (masse, massem1, finvmaold).
Changed unit of variables lat_min_guide and lat_max_guide from module conf_guide_m from degrees to rad. Then we do not have to convert the whole array rlat from rad to degrees in SUBROUTINE tau2alpha. Removed some useless computations in inigeom. Removed module coefils. Moved variables sddv, unsddv, sddu, unsddu, eignfnu, eignfnv of module coefils to module inifgn_m. Downgraded variables coefilu, coefilu2, coefilv, coefilv2, modfrstu, modfrstv of module coefils to local variables of SUBROUTINE inifilr. Write and read a 3-dimensional variable Tsoil in restartphy.nc and startphy.nc instead of multiple variables for the different subs-urfaces and soil layers. This does not allow any longer to provide only the surface value in startphy.nc and spread it to other layers. Instead, if necessary, pre-process the file startphy.nc to spread the surface value.
dynetat0 read rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d from "start.nc" and then these variables were overwritten by inigeom. Corrected this. Now, inigeom does not compute rlonu, rlatu, rlonv and rlatv. Moreover, cu_2d, cv_2d, aire_2d are not written to "restart.nc". Since xprimu, xprimv, xprimm025, xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 are computed at the same time as rlonu, rlatu, rlonv, rlatv, and since it would not be convenient to separate those computations, we decide to write xprimu, xprimv, xprimm025, xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 into "restart.nc", read them from "start.nc" and not compute them in inigeom. So, in summary, "start.nc" contains all the coordinates and their derivatives, and inigeom only computes the 2D-variables. Technical details: Moved variables rlatu, rlonv, rlonu, rlatv, xprimu, xprimv from module comgeom to module dynetat0_m. Upgraded local variables rlatu1, yprimu1, rlatu2, yprimu2, xprimm025, xprimp025 of procedure inigeom to variables of module dynetat0_m. Removed unused local variable yprimu of procedure inigeom and corresponding argument yyprimu of fyhyp. Moved variables clat, clon, grossismx, grossismy, dzoomx, dzoomy, taux, tauy from module serre to module dynetat0_m (since they are read from "start.nc"). The default values are now defined in read_serre instead of in the declarations. Changed name of module serre to read_serre_m, no more module variable here. The calls to fxhyp and fyhyp are moved from inigeom to etat0. Side effects in programs other than gcm: etat0 and read_serre write variables of module dynetat0; the programs test_fxyp and test_inter_barxy need more source files. Removed unused arguments len and nd of cv3_tracer. Removed unused argument PPSOL of LWU. Bug fix in test_inter_barxy: forgotten call to read_serre.
Sources inside, compilation outside.
Created procedure read_yomcst. Deleted some intermediary variables in procedure orbit.
In procedure fxhyp, extracted the body of the loop on ik into a new procedure: fxhyp_loop_ik. dzoomx and dzoomy must now be fractions of the entire range, they cannot be ranges in degrees or rad. In fxhyp, force Xf(2 * nmax) = pi_d instead of possibly doing it in fxhyp_loop_ik. In fxhyp_loop_ik, when testing whether xvrai is between -pi and pi, changed the boundaries from -pi - 0.1 to - pi_d - 1d-5 and from pi + 0.1 to pi_d + 1d-5. This reveals a misconception of the code. Therefore, this version does not work.
In procedure fxhyp, removed the possibility to set scal180 to false. The useful lower bound of fhyp and xxpr is not 0. It does not make sense to give the save attribute to is2 since fxhyp is only called one per run. Bug fix: is2 could be used without being defined. The bug did not appear because is2 had the save attribute so it was initialized at 0.
Removed procedure fxyhyper. Useless intermediary between inigeom and fxhyp, fyhyp. Removed argument yprimv of fyhyp, not used in inigeom. Downgraded rlonm025 and rlonp025 from arguments to local variables of fxhyp, not used in inigeom. Downgraded arguments champmin, champmax of fxhyp and fyhyp to local variables: print them in fxhyp and fyhyp instead of fxyhyper. Removed arguments xzoomdeg, grossism, dzooma, tau of fxhyp. Use directly module variables clon, grossismx, dzoomx, taux instead. Removed arguments yzoomdeg, grossism, dzooma, tau of fyhyp. Use directly module variables clat, grossismy, dzoomy, tauy instead. In procedure yamada4, l0 does not need the save attribute. It is defined at each call.
Moved the call to read_serre out of conf_gcm so that it can be called only in the program ce0l, not in gcm. In gcm, variables of module serre are read from start file. Added reading of dzoomx, dzoomy, taux, tauy from start file, in dynetat0. Those variables were written by dynredem0 but not read. Removed possibility fxyhypb = false, because the geometric part of the program is such a mess. Could then remove variables transx, transy, alphax, alphay, pxo, pyo of module serre. Bug fix in tau2alpha: missing save attributes. The first call to tau2alpha needs to compute dxdyu and dxdyv regardless of value of argument type, because they will be needed for subsequent calls to tau2alpha with various values of argument type.
Removed 8 first arguments of fxyhyper, use variables of module serre instead. Moved reading of variables of module serre from procedure conf_gcm to new procedure read_serre. In guide, added conditions to avoid useless calls to tau2alpha and writefield. Bugfix: offline corresponds to alpha = 1. Open only one NetCDF file to read number of vertical levels. In tau2alpha, added conditions to avoid useless computations of dxdyu and dxdyv. gamma is not needed for a regular grid.
Module pressure_var is now only used in gcm. Created local variables pls and p3d in etat0, added argument p3d to regr_pr_o3. In leapfrog, moved computation of p3d and exner function immediately after integrd, for clarity (does not change the execution). Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra, tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress; ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt, dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver Removed argument d_tra and computation of d_tra in concvl. Removed argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just set to 0 in cv_driver, associated to d_tra in concvl, and set again to zero in concvl.
In procedure leapfrog, computation of p3d and a call to exner_hyb were made before and after the call to calfis. This was a repetition of the same calculation since calfis does not change the surface pressure. Kept only one calculation, and moved it before the test for the call to calfis.
Changed all ".f90" suffixes to ".f".
Moved procedure iniconst inside module comconst. Removed useless variables of module comconst: im, jm, lllm, imp1, jmp1, lllmm1, lllmp1, lcl, cotot, unsim. Move definition of dtvr that was in dynetat0 and etat0 to iniconst. Moved comparison of dtvr from day_step and start.nc that was in gcm to dynetat0. Moved call to disvert out of iniconst. Moved call to iniconst in gcm before call to dynetat0. Removed unused argument pvteta of physiq (not used either in LMDZ).
Moved procedure inigeom into module comgeom. In disvert, renamed s_sampling to vert_sampling, following LMDZ. Removed choice strato1. In case read, read ap and bp instead of s (following LMDZ). Added argument phis to start_init_orog and start_init_dyn, and removed variable phis of module start_init_orog_m. In etat0 and start_init_orog, renamed relief to zmea_2d. In start_init_dyn, renamed psol to ps. In start_init_orog, renamed relief_hi to relief. No need to set phis(iim + 1, :) = phis(1, :), already done in grid_noro. Documentation for massbar out of SVN, in massbar.txt. Documentation was duplicated in massdair, but not relevant in massdair. In conflx, no need to initialize pen_[ud] and pde_[ud]. In flxasc, used intermediary variable fact (following LMDZ). In grid_noro, added local variable zmea0 for zmea not smoothed and computed zphi from zmea instead of zmea0 (following LMDZ). This changes the results of ce0l. Removed arguments pen_u and pde_d of phytrac and nflxtr, which were not used.
Moved everything out of libf.
Useless copies into "gdx" and "gdy" in "gradiv2".
Write used namelists to file "" instead of standard output. Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate dimension to arrays so they have rank 3, like the dummy arguments in "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Extract the initialization part from "bilan_dyn" and make a separate procedure, "init_dynzon", from it. Move variables from modules "iniprint" and "logic" to module "conf_gcm_m". Promote internal procedures of "fxy" to private procedures of module "fxy_m". Extracted documentation from "inigeom". Removed useless "save" attributes. Removed useless intermediate variables. Extracted processing of poles from loop on latitudes. Write coordinates to file "longitude_latitude.txt" instead of standard output. Do not use ozone tracer for radiative transfer.
Removed procedure "psextbar". "psextbar" was called but the result of the call was not used.
Simplified "etat0_lim.sh" and "gcm.sh" because the full versions depended on personal arrangements for directories and machines. Translated included files into modules. Encapsulated procedures into modules. Moved variables from module "comgeom" to local variables of "inigeom". Deleted some unused variables in "comgeom". Moved variable "day_ini" from module "temps" to module "dynetat0_m". Removed useless test on variable "time" and useless "close" statement in procedure "leapfrog". Removed useless call to "inigeom" in procedure "limit".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |