Parent Directory | Revision Log
Sticky Revision: |
dynetat0 read rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d from "start.nc" and then these variables were overwritten by inigeom. Corrected this. Now, inigeom does not compute rlonu, rlatu, rlonv and rlatv. Moreover, cu_2d, cv_2d, aire_2d are not written to "restart.nc". Since xprimu, xprimv, xprimm025, xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 are computed at the same time as rlonu, rlatu, rlonv, rlatv, and since it would not be convenient to separate those computations, we decide to write xprimu, xprimv, xprimm025, xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 into "restart.nc", read them from "start.nc" and not compute them in inigeom. So, in summary, "start.nc" contains all the coordinates and their derivatives, and inigeom only computes the 2D-variables. Technical details: Moved variables rlatu, rlonv, rlonu, rlatv, xprimu, xprimv from module comgeom to module dynetat0_m. Upgraded local variables rlatu1, yprimu1, rlatu2, yprimu2, xprimm025, xprimp025 of procedure inigeom to variables of module dynetat0_m. Removed unused local variable yprimu of procedure inigeom and corresponding argument yyprimu of fyhyp. Moved variables clat, clon, grossismx, grossismy, dzoomx, dzoomy, taux, tauy from module serre to module dynetat0_m (since they are read from "start.nc"). The default values are now defined in read_serre instead of in the declarations. Changed name of module serre to read_serre_m, no more module variable here. The calls to fxhyp and fyhyp are moved from inigeom to etat0. Side effects in programs other than gcm: etat0 and read_serre write variables of module dynetat0; the programs test_fxyp and test_inter_barxy need more source files. Removed unused arguments len and nd of cv3_tracer. Removed unused argument PPSOL of LWU. Bug fix in test_inter_barxy: forgotten call to read_serre.
Moved variable nb_files from module histcom_var to module histbeg_totreg_m. Removed unused argument q of writehist. No history file is created in program ce0l so there is no need to call histclo in etat0. In phyredem, access variables rlat and rlon directly from module phyetat0_m instead of having them as arguments. This is clearer for the program gcm. There are bad side effects for the program ce0l: we have to modify the module variables rlat and rlon in procedure etat0, and we need the additional file phyetat0.f to compile ce0l.
Sources inside, compilation outside.
Removed arguments day0, anne0 of procedures initdynav and inithist. Use directly day_ref, annee_ref instead. Moved variables annee_ref, day_ref of module temps to module dynetat0_m. Deleted variables dayref and anneeref of module conf_gcm_m and removed them from namelist conf_gcm_nml. These variables were troubling intermediary on the way to annee_ref and day_ref. Gave as default values to annee_ref and day_ref the default values of dayref and anneeref. Moved the test on raz_date from main unit gcm to procedure dynetat0. Created namelist dynetat0_nml. Read annee_ref and day_ref from standard input in dynetat0 and redefine them from "start.nc" if not raz_date. Rationale: 1 - Choose the best programming from the point of view of program gcm only, forgetting program ce0l. 2 - The normal case is to define annee_ref and day_ref from "start.nc" so put them in module dynetat0_m rather than in conf_gcm_m. 3 - Try to always read the same namelists in the same order regardless of choices in previous namelists. Downsides: 1 -We now need the file "dynetat0.f" for the program ce0l, because dynetat0_m is used by dynredem0. 2 - We need to define annee_ref and day_ref from procedure etat0. Removed useless variable day_end of module temps.
Moved the call to read_serre out of conf_gcm so that it can be called only in the program ce0l, not in gcm. In gcm, variables of module serre are read from start file. Added reading of dzoomx, dzoomy, taux, tauy from start file, in dynetat0. Those variables were written by dynredem0 but not read. Removed possibility fxyhypb = false, because the geometric part of the program is such a mess. Could then remove variables transx, transy, alphax, alphay, pxo, pyo of module serre. Bug fix in tau2alpha: missing save attributes. The first call to tau2alpha needs to compute dxdyu and dxdyv regardless of value of argument type, because they will be needed for subsequent calls to tau2alpha with various values of argument type.
Imported procedure grilles_gcm_sub from LMDZ. Had then to transform local variable phis of etat to argument. Replaced calls to lnblnk by calls to trim. Removed arguments nlat, klevel and griscal of filtreg. Replaced integer arguments ifiltre and iaire by logical arguments direct and intensive. Changed default values of guide_t and guide_q to false.
Created procedure test_disvert (following LMDZ). Added procedures hybrid and funcd in module disvert_m. Upgraded compute_ab from internal procedure of disvert to module procedure. Added variables y, ya in module disvert_m. Upgraded s from local variable of procedure disvert to module variable. Renamed allowed value of variable vert_sampling in procedure disvert from "read" to "read_hybrid". Added possibility to read pressure values, value "read_pressure". Replaced vertical distribution for value "param" by the distribution "strato_correct" from LMDZ (but kept the value "param"). In case "tropo", replaced 1 by dsigmin (following LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ). Changed computation of bp in procedure compute_ab. Removed debugindex case in clmain. Removed useless argument rlon of procedure clmain. Removed useless variables ytaux, ytauy of procedure clmain. Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure etat0. Removed variable ok_veget:. coupling with the model Orchid is not possible. Removed variable ocean: modeling an ocean slab is not possible. Removed useless variables tmp_rriv and tmp_rcoa from module interface_surf. Moved initialization of variables da, mp, phi in procedure physiq to to inside the test iflag_con >= 3.
Module pressure_var is now only used in gcm. Created local variables pls and p3d in etat0, added argument p3d to regr_pr_o3. In leapfrog, moved computation of p3d and exner function immediately after integrd, for clarity (does not change the execution). Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra, tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress; ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt, dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver Removed argument d_tra and computation of d_tra in concvl. Removed argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just set to 0 in cv_driver, associated to d_tra in concvl, and set again to zero in concvl.
Removed unused variables lock_startdate and time_stamp of module calendar. Noticed that physiq does not change the surface pressure. So removed arguments ps and dpfi of subroutine addfi. dpfi was always 0. The computation of ps in addfi included some averaging at the poles. In principle, this does not change ps but in practice it does because of finite numerical precision. So the results of the simulation are changed. Removed arguments ps and dpfi of calfis. Removed argument d_ps of physiq. du at the poles is not computed by dudv1, so declare only the corresponding latitudes in dudv1. caldyn passes only a section of the array dudyn as argument. Removed variable niadv of module iniadvtrac_m. Declared arguments of exner_hyb as assumed-shape arrays and made all other horizontal sizes in exner_hyb dynamic. This allows the external program test_disvert to use exner_hyb at a single horizontal position.
Removed procedures ini_histday, ini_histhf, write_histday and write_histhf. Divided file regr_pr_coefoz.f into regr_pr_av.f and regr_pr_int.f. (Following LMDZ.) Divided module regr_pr_coefoz into modules regr_pr_av_m and regr_pr_int_m. Renamed regr_pr_av_coefoz to regr_pr_av and regr_pr_int_coefoz to regr_pr_int. The idea is that those procedures are more general than Mobidic. Removed argument dudyn of calfis and physiq. dudyn is not used either in LMDZ. Removed computation in calfis of unused variable zpsrf (not used either in LMDZ). Removed useless computation of dqfi in calfis (part 62): the results were overwritten. (Same in LMDZ.)
Changed all ".f90" suffixes to ".f".
Moved procedure iniconst inside module comconst. Removed useless variables of module comconst: im, jm, lllm, imp1, jmp1, lllmm1, lllmp1, lcl, cotot, unsim. Move definition of dtvr that was in dynetat0 and etat0 to iniconst. Moved comparison of dtvr from day_step and start.nc that was in gcm to dynetat0. Moved call to disvert out of iniconst. Moved call to iniconst in gcm before call to dynetat0. Removed unused argument pvteta of physiq (not used either in LMDZ).
Moved procedure inigeom into module comgeom. In disvert, renamed s_sampling to vert_sampling, following LMDZ. Removed choice strato1. In case read, read ap and bp instead of s (following LMDZ). Added argument phis to start_init_orog and start_init_dyn, and removed variable phis of module start_init_orog_m. In etat0 and start_init_orog, renamed relief to zmea_2d. In start_init_dyn, renamed psol to ps. In start_init_orog, renamed relief_hi to relief. No need to set phis(iim + 1, :) = phis(1, :), already done in grid_noro. Documentation for massbar out of SVN, in massbar.txt. Documentation was duplicated in massdair, but not relevant in massdair. In conflx, no need to initialize pen_[ud] and pde_[ud]. In flxasc, used intermediary variable fact (following LMDZ). In grid_noro, added local variable zmea0 for zmea not smoothed and computed zphi from zmea instead of zmea0 (following LMDZ). This changes the results of ce0l. Removed arguments pen_u and pde_d of phytrac and nflxtr, which were not used.
Moved everything out of libf.
Renamed tpot to teta and psol to ps in etat0. Replaced calls to flincom by calls to NetCDF95 in startdyn. lon_ini, lat_ini and levdyn_ini are now pointers.
NaN to signalling NaN in gfortran_debug.mk. Removed unused procedures in getincom and getincom2. In procedure conf_interface, replaced call to getincom by new namelist. Moved procedure conf_interface into module interface_surf. Added variables sig1 and w01 to startphy.nc and restartphy.nc, for procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and w01 in concvl and physiq. Deleted unused arguments of clmain, clqh and intersurf_hq, among which (y)?sollwdown. Following LMDZ, in physiq, read sollw instead of sollwdown from startphy.nc, write sollw instead of sollwdown to restartphy.nc. In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade and ok_aie are false. (Following LMDZ.) Added dimension klev to startphy.nc and restartphy.nc, and deleted dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and rnebcon for vertical levels >=2. Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)
No reason to call inidissip in ce0l. In inidissip, set random seed to 1 beacuse PGI compiler does not accept all zeros. dq was computed needlessly in caladvtrac. Arguments masse and dq of calfis not used. Replaced real*8 by double precision. Pass arrays with inverted order of vertical levels to conflx instead of creating local variables for this inside conflx.
In procedure, "addfi" access directly the module variable "dtphys" instead of going through an argument. In "conflx", do not create a local variable for temperature with reversed order of vertical levels. Instead, give an actual argument with reversed order in "physiq". Changed names of variables "rmd" and "rmv" from module "suphec_m" to "md" and "mv". In "hgardfou", print only the first temperature out of range found.
Split "flincom.f90" into "flinclo.f90", "flinfindcood.f90", "flininfo.f90" and "flinopen_nozoom.f90", in directory "IOIPSL/Flincom". Renamed "etat0_lim" to "ce0l", as in LMDZ. Split "readsulfate.f" into "readsulfate.f90", "readsulfate_preind.f90" and "getso4fromfile.f90". In etat0, renamed variable q3d to q, as in "dynredem1". Replaced calls to Flicom procedures by calls to NetCDF95. In leapfrog, added call to writehist. Extracted ASCII art from "grid_noro" into a file "grid_noro.txt". Transformed explicit-shape local arrays into automatic arrays, so that test on values of iim and jjm is no longer needed. Test on weight: IF (weight(ii, jj) /= 0.) THEN is useless. There is already a test before: if (any(weight == 0.)) stop "zero weight in grid_noro" In "aeropt", replaced duplicated lines with different values of inu by a loop on inu. Removed arguments of "conf_phys". Corresponding variables are now defined in "physiq", in a namelist. In "conf_phys", read a namelist instead of using getin.
Cleaning.
Changed name of module "comvert" to "disvert_m". Changed constant 1. to 0.3 in vertical sampling "strato".
Removed unused procedure "divgrad". In procedure "dissip", save memory by using intermediary arrays "gdx" and "gdy" several times instead of additional array "grx" and "gry". In procedure "inidissip", write "dtdiss * teta*" instead of "teta*". In "comvert", change name of s_sampling from "LMD5" to "tropo" and from "strato2" to "strato".
No more included file in LMDZE, not even "netcdf.inc". Created a variable containing the list of common source files in GNUmakefile. So we now also see clearly files that are specific to each program. Split module "histcom". Assembled resulting files in directory "Histcom". Removed aliasing in calls to "laplacien".
Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1" in "inidissip" by calls to intrinsic procedures. Split file "interface_surf.f90" into a file with a module containing only variables, "interface_surf", and single-procedure files. Gathered files into directory "Interface_surf". Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to "divgrad2" and "divgrad", and "crot" to "nxgraro2" and "nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot" from module "inidissip_m", so it can pass them to "gradiv2", etc. Thanks to this modification, we avoid a circular dependency betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by "gradiv2", for instance, during computation of eigenvalues is not the value "cdivu" computed by "inidissip". Extracted procedure "start_inter_3d" from module "startdyn", to its own module. In "inidissip", unrolled loop on "ii". I find it clearer now. Moved variables "matriceun", "matriceus", "matricevn", "matricevs", "matrinvn" and "matrinvs" from module "parafilt" to module "inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu", "jfiltsv" from module "coefils" to module "inifilr_m".
LMDZE now uses library Jumble. Removed all calls to "flinget". Replaced calls to "flinget", "flininfo", "flinopen_nozoom" by calls to NetCDF95 and Jumble. Split file "cv_driver.f" into "cv_driver.f90", "cv_flag.f90" and "cv_thermo.f90". Bug fix: "QANCIEN" was read twice in "phyeytat0". In "physiq", initialization of "d_t", "d_u", "d_v" was useless.
Replaced calls to "flinget" by calls to "NetCDF95".
"start_init_phys" is now called directly by "etat0" instead of through "start_init_dyn". "qsol_2d" is no longer a variable of module "start_init_phys_m", it is an argument of "start_init_phys". "start_init_dyn" now receives "tsol_2d" from "etat0". Split file "vlspltqs.f" into "vlspltqs.f90", "vlxqs.f90" and ""vlyqs.f90". In "start_init_orog", replaced calls to "flin*" by calls to NetCDF95.
"pi" comes from "nr_util". Removed subroutine "initialize" in module "comconst". Copied the content of "fxy_sin.h" into "fxysinus", instead of getting it from an "include" line. Removed file "fxy_sin.h". "ps" has rank 2 in "gcm" and "dynetat0". Assumed-shape for argument "q" of "integrd".
Now using the library "NR_util".
Split "stringop.f90" into single-procedure files. Gathered files in directory "IOIPSL/Stringop". Split "flincom.f90" into "flincom.f90" and "flinget.f90". Removed unused procedures from module "flincom". Removed unused argument "filename" of procedure "flinopen_nozoom". Removed unused files. Split "grid_change.f90" into "grid_change.f90" and "gr_phy_write_3d.f90". Removed unused procedures from modules "calendar", "ioipslmpp", "grid_atob", "gath_cpl" and "getincom". Removed unused procedures in files "ppm3d.f" and "thermcell.f". Split "mathelp.f90" into "mathelp.f90" and "mathop.f90". Removed unused variable "dpres" of module "comvert". Use argument "itau" instead of local variables "iadvtr" and "first" to control algorithm in procedure "fluxstokenc". Removed unused arguments of procedure "integrd". Removed useless computations at the end of procedure "leapfrog". Merged common block "matrfil" into module "parafilt".
Imported Source files of the external library "IOIPSL_Lionel" into "libf/IOIPSL". Split "cray.f90" into "scopy.f90" and "ssum.f90". Rewrote "leapfrog" in order to have a clearer algorithmic structure.
Removed unused "diagedyn.f" and "undefSTD.f". In "etat0", the variable "dt" of module "temps" was defined from "landicered.nc", which was meaningless and useless. Replaced "dt" by a local trash variable. Removed variable "dt" from module "temps" and created instead a local variable of "leapfrog" and an argument of "integrd".
"dyn3d" and "filtrez" do not contain any included file so make rules have been updated. "comdissip.f90" was useless, removed it. "dynredem0" wrote undefined value in "controle(31)", that was overwritten by "dynredem1". Now "dynredem0" just writes 0 to "controle(31)". Removed arguments of "inidissip". "inidissip" now accesses the variables by use association. In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote undefined value to "controle(31)". Added argument "itau" of "dynredem1" to correct that. "itaufin" does not need to be a module variable (of "temps"), made it a local variable of "leapfrog". Removed calls to "diagedyn" from "leapfrog".
Moved variable "dtdiss" from module "comconst", variable "idissip" from module "conf_gcm_m" and all variables from module "comdissipn" to module "inidissip_m". "inidissip" creates file "inidissip.csv". "idissip" is no longer read from a namelist. Removed useless computation of "dtdiss" in procedure "iniconst".
Simplified "etat0_lim.sh" and "gcm.sh" because the full versions depended on personal arrangements for directories and machines. Translated included files into modules. Encapsulated procedures into modules. Moved variables from module "comgeom" to local variables of "inigeom". Deleted some unused variables in "comgeom". Moved variable "day_ini" from module "temps" to module "dynetat0_m". Removed useless test on variable "time" and useless "close" statement in procedure "leapfrog". Removed useless call to "inigeom" in procedure "limit".
Split "orografi.f": one file for each procedure. Put the created files in new directory "Orography". Removed argument "vcov" of procedure "sortvarc". Removed arguments "itau" and "time" of procedure "caldyn0". Removed arguments "itau", "time" and "vcov" of procedure "sortvarc0". Removed argument "time" of procedure "dynredem1". Removed NetCDF variable "temps" in files "start.nc" and "restart.nc", because its value is always 0. Removed argument "nq" of procedures "iniadvtrac" and "leapfrog". The number of "tracers read in "traceur.def" must now be equal to "nqmx", or "nqmx" must equal 4 if there is no file "traceur.def". Replaced variable "nq" by constant "nqmx" in "leapfrog". NetCDF variable for ozone field in "coefoz.nc" must now be called "tro3" instead of "r". Fixed bug in "zenang".
Superficial modifications
In module "regr_pr", rewrote scanning of horizontal positions as a single set of loops, using a mask. Added some "intent" attributes. In "dynredem0", replaced calls to Fortran 77 interface of NetCDF by calls to NetCDF95. Removed calls to "nf_redef", regrouped all writing operations. In "dynredem1", replaced some calls to Fortran 77 interface of NetCDF by calls to Fortran 90 interface. Renamed variable "nqmax" to "nq_phys". In "physiq", if "nq >= 5" then "wo" is computed from the parameterization of "Cariolle".
-- Minor modification of input/output: Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1", "ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4" "mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from "histrac.nc". Variable "raz_date" of module "conf_gcm_m" has logical type instead of integer type. -- Should not change any result at run time: Modified calls to "IOIPSL_Lionel" procedures because the interfaces of these procedures have been simplified. Changed name of variable in module "start_init_orog_m": "masque" to "mask". Created a module containing procedure "phyredem". Removed arguments "punjours", "pdayref" and "ptimestep" of procedure "iniphysiq". Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created procedure "gr_phy_write_3d". Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev", "calcul_divers".
-- Minor change of behaviour: "etat0" does not compute "rugsrel" nor "radpas". Deleted arguments "radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of "phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In "physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program "etat0_lim" does not use "clesphys2". -- Minor modification of input/output: Created subroutine "read_clesphys2". Variables of "clesphys2" are read in "read_clesphys2" instead of "conf_gcm". "printflag" does not print variables of "clesphys2". -- Should not change any result at run time: References to module "numer_rec" instead of individual modules of "Numer_rec_Lionel". Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm", "leapfrog", "phyetat0". Deleted variable "clesphy0" in "gcm". "phyetat0" does not modify variables of "clesphys2". The program unit "gcm" does not modify "itau_phy". Added some "intent" attributes. "regr11_lint" does not call "polint".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
This revision is not in working order. Pending some moving of files. Important changes. In the program "etat0_lim": ozone coefficients from Mobidic are regridded in time instead of pressure ; consequences in "etat0". In the program "gcm", ozone coefficients from Mobidic are read once per day only for the current day and regridded in pressure ; consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and "regr_pr_comb_coefoz_m". NetCDF95 is a library and does not export NetCDF. New variables "nag_gl_options", "nag_fcalls_options" and "nag_cross_options" in "nag_tools.mk". "check_coefoz.jnl" rewritten entirely for new version of "coefoz_LMDZ.nc". Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk". Added some "intent" attributes in "calfis", "clmain", "clqh", "cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD", "nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind" and "undefSTD". In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of 1. "phis" has assumed shape in "dynredem0". Added module containing "dynredem0". Changed some calls with NetCDF Fortran 77 interface to calls with NetCDF95 interface. Replaced calls to "ssum" by calls to "sum" in "inigeom". In "make.sh", new option "-c" to change compiler. In "aaam_bud", argument "rjour" deleted. In "physiq": renamed some variables; deleted variable "xjour". In "phytrac": renamed some variables; new argument "lmt_pas".
Created module from included file parafilt. Converted caldyn0 to free format. Added a rule to create cross-references with NAG. Added optional attribute in iniadvtrac. Suppressed argument nq in dynredem0 and dynredem1, using nqmx instead. Replaced some NetCDF calls by netcdf95 calls in dynredem0. Added intent attribute in dynredem0 and dynredem1. Annotated use statements with only clause, in dynredem1. Suppressed variable nq and argument of iniadvtrac in etat0. Added test on nqmx in etat0.
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.21 |