Parent Directory | Revision Log
Sticky Revision: |
Removed unused arguments of groupe, cv3_undilute2, cv_undilute2, interfsur_lim, drag_noro, orodrag, gwprofil Chickened out of revision 148: back to double precision in invert_zoom_x (and overloaded rtsafe).
In procedure fxhyp, the convoluted computation of tanh(fa/fb) occurred three times. Extracted it into a function. Also, the computation of xmoy and fxm was repeated. So stored the values in arrays instead. In procedure fxhyp, in the computation of fhyp, there were tests xtild(i) == 0. and xtild(i) == pi_d. No use to do these tests at each iteration. We now they are true for i == nmax and i == 2 * nmax, respectively, and we know they are false for other values of "i". Similarly, in the computations of ffdx and xxpr, there were the tests xmoy == 0. and xmoy == pi_d, these could not be true. Moved files from bibio to dyn3d, following LMDZ.
Sources inside, compilation outside.
Removed unused file "condsurf.f" (only useful for ocean slab). day_step must be a multiple of 4 * iperiod if ok_guide. Changed type of variable online of module conf_guide_m from integer to logical. Value -1 was not useful, equivalent to not ok_guide. Removed argument masse of procedure guide. masse is kept consistent with ps throughout the run. masse need only be computed again just after ps has been modified. In prodecure guide, replaced use of remanent variable first by test on itau. Replaced test on variable "test" by test on integer values. In leapfrog, for the call to guide, replaced test on real values by test on integer values. Bug fix in tau2alpha: computation of dxdyv (following LMDZ revision 1040). In procedure wrgrads, replaced badly chosen argument name "if" by i_f.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and rad_chau2 from module nuagecom to module conf_phys_m. Read clesphys2_nml from conf_phys instead of gcm. Removed argument iflag_con from several procedures. Access module variable instead.
Split "flincom.f90" into "flinclo.f90", "flinfindcood.f90", "flininfo.f90" and "flinopen_nozoom.f90", in directory "IOIPSL/Flincom". Renamed "etat0_lim" to "ce0l", as in LMDZ. Split "readsulfate.f" into "readsulfate.f90", "readsulfate_preind.f90" and "getso4fromfile.f90". In etat0, renamed variable q3d to q, as in "dynredem1". Replaced calls to Flicom procedures by calls to NetCDF95. In leapfrog, added call to writehist. Extracted ASCII art from "grid_noro" into a file "grid_noro.txt". Transformed explicit-shape local arrays into automatic arrays, so that test on values of iim and jjm is no longer needed. Test on weight: IF (weight(ii, jj) /= 0.) THEN is useless. There is already a test before: if (any(weight == 0.)) stop "zero weight in grid_noro" In "aeropt", replaced duplicated lines with different values of inu by a loop on inu. Removed arguments of "conf_phys". Corresponding variables are now defined in "physiq", in a namelist. In "conf_phys", read a namelist instead of using getin.
Removed argument "pdteta" of "calfis", because it was not used. Created module "conf_guide_m", containing procedure "conf_guide". Moved module variables from "guide_m" to "conf_guide_m". In module "getparam", removed "ini_getparam" and "fin_getparam" from generic interface "getpar". Created module variables in "tau2alpha_m" to replace common "comdxdy".
Split "stringop.f90" into single-procedure files. Gathered files in directory "IOIPSL/Stringop". Split "flincom.f90" into "flincom.f90" and "flinget.f90". Removed unused procedures from module "flincom". Removed unused argument "filename" of procedure "flinopen_nozoom". Removed unused files. Split "grid_change.f90" into "grid_change.f90" and "gr_phy_write_3d.f90". Removed unused procedures from modules "calendar", "ioipslmpp", "grid_atob", "gath_cpl" and "getincom". Removed unused procedures in files "ppm3d.f" and "thermcell.f". Split "mathelp.f90" into "mathelp.f90" and "mathop.f90". Removed unused variable "dpres" of module "comvert". Use argument "itau" instead of local variables "iadvtr" and "first" to control algorithm in procedure "fluxstokenc". Removed unused arguments of procedure "integrd". Removed useless computations at the end of procedure "leapfrog". Merged common block "matrfil" into module "parafilt".
Split "vlsplt.f" in single-procedure files. Gathered the files in directory "dyn3d/Vlsplt". Defined "pbarum(:, 1, :)" and "pbarum(:, jjm + 1, :)" in procedure "groupe".
Imported Source files of the external library "IOIPSL_Lionel" into "libf/IOIPSL". Split "cray.f90" into "scopy.f90" and "ssum.f90". Rewrote "leapfrog" in order to have a clearer algorithmic structure.
Removed unused "diagedyn.f" and "undefSTD.f". In "etat0", the variable "dt" of module "temps" was defined from "landicered.nc", which was meaningless and useless. Replaced "dt" by a local trash variable. Removed variable "dt" from module "temps" and created instead a local variable of "leapfrog" and an argument of "integrd".
"dyn3d" and "filtrez" do not contain any included file so make rules have been updated. "comdissip.f90" was useless, removed it. "dynredem0" wrote undefined value in "controle(31)", that was overwritten by "dynredem1". Now "dynredem0" just writes 0 to "controle(31)". Removed arguments of "inidissip". "inidissip" now accesses the variables by use association. In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote undefined value to "controle(31)". Added argument "itau" of "dynredem1" to correct that. "itaufin" does not need to be a module variable (of "temps"), made it a local variable of "leapfrog". Removed calls to "diagedyn" from "leapfrog".
-- Minor modification of input/output: Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1", "ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4" "mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from "histrac.nc". Variable "raz_date" of module "conf_gcm_m" has logical type instead of integer type. -- Should not change any result at run time: Modified calls to "IOIPSL_Lionel" procedures because the interfaces of these procedures have been simplified. Changed name of variable in module "start_init_orog_m": "masque" to "mask". Created a module containing procedure "phyredem". Removed arguments "punjours", "pdayref" and "ptimestep" of procedure "iniphysiq". Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created procedure "gr_phy_write_3d". Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev", "calcul_divers".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.21 |