[lmdze] Log of /trunk/Sources/phylmd/CV3

Revision 150 - Directory Listing
Modified Thu Jun 18 13:49:26 2015 UTC (8 years, 11 months ago) by guez

Removed unused arguments of groupe, cv3_undilute2, cv_undilute2,
interfsur_lim, drag_noro, orodrag, gwprofil

Chickened out of revision 148: back to double precision in
invert_zoom_x (and overloaded rtsafe).

Revision 145 - Directory Listing
Modified Tue Jun 16 15:23:29 2015 UTC (8 years, 11 months ago) by guez

Renamed bibio to misc.

In procedure fxhyp, use the fact that xf is an odd function of xtild.

In procedure invert_zoom_x, replace linear search in xf by
bisection. Also, use result from previous loop iteration as initial
guess. Variable "it" cannot be equal to 2 * nmax after search.

Unused arguments: hm of cv3_feed; ph, qnk, tv,tvp of cv3_mixing; ppsol
of lw; rconst, temp of vdif_kcay; rconst, plev, temp, ustar, l_mix of
yamada.

Revision 139 - Directory Listing
Modified Tue May 26 17:46:03 2015 UTC (8 years, 11 months ago) by guez

dynetat0 read rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d from
"start.nc" and then these variables were overwritten by
inigeom. Corrected this. Now, inigeom does not compute rlonu, rlatu,
rlonv and rlatv. Moreover, cu_2d, cv_2d, aire_2d are not written to
"restart.nc". Since xprimu, xprimv, xprimm025, xprimp025, rlatu1,
rlatu2, yprimu1, yprimu2 are computed at the same time as rlonu,
rlatu, rlonv, rlatv, and since it would not be convenient to separate
those computations, we decide to write xprimu, xprimv, xprimm025,
xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 into "restart.nc", read
them from "start.nc" and not compute them in inigeom. So, in summary,
"start.nc" contains all the coordinates and their derivatives, and
inigeom only computes the 2D-variables.

Technical details:

Moved variables rlatu, rlonv, rlonu, rlatv, xprimu, xprimv from module
comgeom to module dynetat0_m. Upgraded local variables rlatu1,
yprimu1, rlatu2, yprimu2, xprimm025, xprimp025 of procedure inigeom to
variables of module dynetat0_m.

Removed unused local variable yprimu of procedure inigeom and
corresponding argument yyprimu of fyhyp.

Moved variables clat, clon, grossismx, grossismy, dzoomx, dzoomy,
taux, tauy from module serre to module dynetat0_m (since they are read
from "start.nc"). The default values are now defined in read_serre
instead of in the declarations. Changed name of module serre to
read_serre_m, no more module variable here.

The calls to fxhyp and fyhyp are moved from inigeom to etat0.

Side effects in programs other than gcm: etat0 and read_serre write
variables of module dynetat0; the programs test_fxyp and
test_inter_barxy need more source files.

Removed unused arguments len and nd of cv3_tracer. Removed unused
argument PPSOL of LWU.

Bug fix in test_inter_barxy: forgotten call to read_serre.

Revision 103 - Directory Listing
Modified Fri Aug 29 13:00:05 2014 UTC (9 years, 8 months ago) by guez
Original Path: trunk/phylmd/CV3_routines

Renamed module cvparam to cv_param. Deleted procedure
cv_param. Changed variables of module cv_param into parameters.

In procedures cv_driver, cv_uncompress and cv3_uncompress, removed
some arguments giving dimensions and used module variables klon and
klev instead.

In procedures gradiv2, laplacien_gam and laplacien, changed
declarations of local variables because klevel is not always klev.

Removed code for nudging surface pressure.

Removed arguments pim and pjm of tau2alpha. Added assignment of false
to variable first.

Replaced real argument del of procedures foeew and FOEDE by logical
argument.

Revision 99 - Directory Listing
Modified Wed Jul 2 18:39:15 2014 UTC (9 years, 10 months ago) by guez
Original Path: trunk/phylmd/CV3_routines

Created procedure test_disvert (following LMDZ). Added procedures
hybrid and funcd in module disvert_m. Upgraded compute_ab from
internal procedure of disvert to module procedure. Added variables y,
ya in module disvert_m. Upgraded s from local variable of procedure
disvert to module variable.

Renamed allowed value of variable vert_sampling in procedure disvert
from "read" to "read_hybrid". Added possibility to read pressure
values, value "read_pressure". Replaced vertical distribution for
value "param" by the distribution "strato_correct" from LMDZ (but kept
the value "param"). In case "tropo", replaced 1 by dsigmin (following
LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ).

Changed computation of bp in procedure compute_ab.

Removed debugindex case in clmain. Removed useless argument rlon of
procedure clmain. Removed useless variables ytaux, ytauy of procedure
clmain.

Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure
etat0.

Removed variable ok_veget:. coupling with the model Orchid is not
possible. Removed variable ocean: modeling an ocean slab is not
possible.

Removed useless variables tmp_rriv and tmp_rcoa from module
interface_surf.

Moved initialization of variables da, mp, phi in procedure physiq to
to inside the test iflag_con >= 3.

Revision 97 - Directory Listing
Modified Fri Apr 25 14:58:31 2014 UTC (10 years ago) by guez
Original Path: trunk/phylmd/CV3_routines

Module pressure_var is now only used in gcm. Created local variables
pls and p3d in etat0, added argument p3d to regr_pr_o3.

In leapfrog, moved computation of p3d and exner function immediately
after integrd, for clarity (does not change the execution).

Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra,
tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress;
ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of
cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt,
dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver

Removed argument d_tra and computation of d_tra in concvl. Removed
argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just
set to 0 in cv_driver, associated to d_tra in concvl, and set again to
zero in concvl.

Revision 91 - Directory Listing
Modified Wed Mar 26 17:18:58 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/phylmd/CV3_routines

Removed unused variables lock_startdate and time_stamp of module
calendar.

Noticed that physiq does not change the surface pressure. So removed
arguments ps and dpfi of subroutine addfi. dpfi was always 0. The
computation of ps in addfi included some averaging at the poles. In
principle, this does not change ps but in practice it does because of
finite numerical precision. So the results of the simulation are
changed. Removed arguments ps and dpfi of calfis. Removed argument
d_ps of physiq.

du at the poles is not computed by dudv1, so declare only the
corresponding latitudes in dudv1. caldyn passes only a section of the
array dudyn as argument.

Removed variable niadv of module iniadvtrac_m.

Declared arguments of exner_hyb as assumed-shape arrays and made all
other horizontal sizes in exner_hyb dynamic. This allows the external
program test_disvert to use exner_hyb at a single horizontal position.

Revision 72 - Directory Listing
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/libf/phylmd/CV3_routines

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

Revision 69 - Directory Listing
Modified Mon Feb 18 16:33:12 2013 UTC (11 years, 2 months ago) by guez
Original Path: trunk/libf/phylmd/CV3_routines

Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from
module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and
rad_chau2 from module nuagecom to module conf_phys_m.

Read clesphys2_nml from conf_phys instead of gcm.

Removed argument iflag_con from several procedures. Access module
variable instead.

Revision 52 - Directory Listing
Modified Fri Sep 23 12:28:01 2011 UTC (12 years, 7 months ago) by guez
Original Path: trunk/libf/phylmd/CV3_routines

Split "conflx.f" into single-procedure files in directory "Conflx".

Split "cv_routines.f" into single-procedure files in directory
"CV_routines". Made module "cvparam" from included file
"cvparam.h". No included file other than "netcdf.inc" left in LMDZE.

Revision 47 - Directory Listing
Added Fri Jul 1 15:00:48 2011 UTC (12 years, 10 months ago) by guez
Original Path: trunk/libf/phylmd/CV3_routines

Split "thermcell.f" and "cv3_routines.f".
Removed copies of files that are now in "L_util".
Moved "mva9" and "diagetpq" to their own files.
Unified variable names across procedures.

	ViewVC Help
Powered by ViewVC 1.1.21

Log of /trunk/Sources/phylmd/CV3_routines