[lmdze] Log of /trunk/Sources/phylmd/Interface

Revision 225 - Directory Listing
Modified Mon Oct 16 12:35:41 2017 UTC (6 years, 6 months ago) by guez

LMDZE is now in Fortran 2003 (use of allocatable arguments).

gradsdef was not used.

Change names: [uv]10m to [uv]10m_srf in clmain, y[uv]1 to
[uv]1lay. Remove useless complication: zx_alf[12]. Do not modify
[uv]1lay after initial definition from [uv].

Add [uv]10m_srf to output.

Change names in physiq: [uv]10m to [uv]10m_srf, z[uv]10m to [uv]10m,
corresponding to NetCDF output names.

Remove unused complication couchelimite and useless variable inirnpb
in phytrac.

Revision 221 - Directory Listing
Modified Thu Apr 20 14:44:47 2017 UTC (7 years ago) by guez

clcdrag is no longer used in LMDZ. Replaced by cdrag in LMDZ. In cdrag
in LMDZ, zxli is a symbolic constant, false. So removed case zxli true
in LMDZE.

read_sst is called zero (if no ocean point on the whole planet) time or
once per call of physiq. If mod(itap - 1, lmt_pas) == 0 then we have
advanced in time of lmt_pas and deja_lu is necessarily false.

qsat[sl] and dqsat[sl] were never called.

Added output of qsurf in histins, following LMDZ.

Last dummy argument dtime of phystokenc is always the same as first
dummy argument pdtphys, removed dtime.

Removed make rules for nag_xref95, since it does not exist any longer.

Revision 217 - Directory Listing
Modified Thu Mar 30 14:25:18 2017 UTC (7 years ago) by guez

run_off_lic downgraded from variable of module interface_surf to local
variable of fonte_neige.

Code could not work with ok_aie set to true, so removed this
possibility. tauae, piz_ae, cg_ae, topswai, solswai were then
0. cldtaupi was the same as cldtaupd.

In sw and procedures called by sw, flag_aer did not need to be double
precision, changed it to logical.

Downgraded re and fl from arguments of newmicro to local
variables. Added output of re and fl (following LMDZ).

Revision 215 - Directory Listing
Modified Tue Mar 28 12:46:28 2017 UTC (7 years ago) by guez

size(snow) is now knon in interfsurf_hq.

Renamed snow to fsnow in clmain, same name as corresponding actual
argument. We can then rename ysnow to simply snow in clmain, same name
as corresponding dummy argument of clqh. No need to initialize local
snow to 0 since it is only used with indices 1:knon and already
initialized from fsnow for each type of surface. If there is no point
for a given type of surface, fsnow should be reset to 0 for this
type. We need to give a valid value to fsnow in this case even if it
will be multiplied by pctsrf = 0 in physiq.

In physiq, no need for intermediate zxsnow for output.

Removed unused arguments tsurf, p1lay, beta, coef1lay, ps, t1lay,
q1lay, u1lay, v1lay, petAcoef, peqAcoef, petBcoef, peqBcoef of
fonte_neige, with unused computations of zx_qs and zcor. (Same was
done in LMDZ.)

Revision 214 - Directory Listing
Modified Wed Mar 22 13:40:27 2017 UTC (7 years ago) by guez

fluxlat, not yfluxlat, should be set to 0 at the beginning of
clmain. So fluxlat is defined for a given type of surface even if
there is no point of this type at the current time step.

fluxlat is defined at each time step in physiq, no need for the save
attribute.

Revision 209 - Directory Listing
Modified Wed Dec 7 17:37:21 2016 UTC (7 years, 4 months ago) by guez

The program did not work with cycle_diurne set to false. mu0 in
physiq, which is supposed to be a cosine, was set to -999.999. So prmu
in swu had a value of the order of 1e3. So zrmum1 in sw2s had a value
of the order of 1e3. So zrayl in sw2s had a value of the order of
1e15. So ztray and ptauaz in swclr also had a large value. So zcorae
at line 138 in swclr had a large negative value, which resulted in
overflow at line 138.

This assignment of -999.999 to mu0 dates from somewhere between
revisions 348 and 524 of LMDZ. It was corrected in revision 1068 of
LMDZ with a call to angle which was present in revision 348. However,
procedure angle was removed from LMDZE in revision 22 because it was
not used. Hesitated to bring back angle but, finally, just removed the
option of having no diurnal cycle.

Revision 208 - Directory Listing
Modified Wed Dec 7 16:44:53 2016 UTC (7 years, 4 months ago) by guez

Module academic was not used.

Useful values for iflag_phys were only 0 and 1 so changed type to logical.

Definition of fmagic was duplicated in procedures alboc and alboc_cd
so moved it up to interfsurf_hq and also moved multiplication by
fmagic (following LMDZ).

Revision 206 - Directory Listing
Modified Tue Aug 30 12:52:46 2016 UTC (7 years, 7 months ago) by guez

Removed dimension klev of flux_[tquv] and y_flux_[tquv] in
clmain. Removed dimension klev of flux_[tquv] in physiq. Removed
dimension klev of flux_[tq] in hbtm. Removed dimension klev of
flux_[tq] in clqh and computations for layers other than the surface
layer. Removed dimension klev of flux_v in clvent and computations for
layers other than the surface layer. Values for layers other than the
surface layer were not used nor output (not even in LMDZ).

Removed argument dnwd0 of concvl. Simply write - mp in physiq
(following LMDZ).

Removed useless intermediary variables zxflux[tquv] in physiq.

Revision 202 - Directory Listing
Modified Wed Jun 8 12:23:41 2016 UTC (7 years, 10 months ago) by guez

Promoted lmt_pas from local variable of physiq to variable of module
conf_gcm_m.

Removed variable run_off of module interface_surf. Was not
used. Called run_off_ter in LMDZ, but not used nor printed there
either.

Simplified logic in interfoce_lim. The way it was convoluted with
interfsurf_hq and clmain was quite a mess. Extracted reading of SST
into a separate procedure: read_sst. We do not need SST and pctsrf_new
at the same time: SST is not needed for sea-ice surface. I did not
like this programming: going through the procedure repeatedly for
different purposes and testing inside whether there was something to
do or it was already done. Reading is now only controlled by itap and
lmt_pas, instead of debut, jour, jour_lu and deja_lu. Now we do not
copy from pct_tmp to pctsrf_new every time step.

Simplified processing of pctsrf in clmain and below. It was quite
troubling: pctsrf_new was intent out in interfoce_lim but only defined
for ocean and sea-ice. Also the idea of having arrays for all
surfaces, pcsrf and pctsrf_new, in interfsurf_hq, which is called for
a particular surface, was troubling. pctsrf_new for all surfaces was
intent out in intefsurf_hq, but not defined for all surfaces at each
call. Removed argument pctsrf_new of clmain: was a duplicate of pctsrf
on output, and not used in physiq. Replaced pctsrf_new in clmain by
pctsrf_new_oce and pctsrf_new_sic, which were the only ones modified.

Revision 191 - Directory Listing
Modified Mon May 9 19:56:28 2016 UTC (7 years, 11 months ago) by guez

Extracted the call to read_comdissnew out of conf_gcm.

Made ok_instan a variable of module clesphys, itau_phy a variable of
module phyetat0_m, nid_ins a variable of module ini_histins_m, itap a
variable of new module time_phylmdz, so that histwrite_phy can be
called from any procedure without the need to cascade those variables
into that procedure. Made itau_w a variable of module time_phylmdz so
that it is computed only once per time step of physics.

Extracted variables of module clesphys which were in namelist
conf_phys_nml into their own namelist, clesphys_nml, and created
procedure read_clesphys reading clesphys_nml, to avoid side effect.

No need for double precision in procedure getso4fromfile. Assume there
is a single variable for the whole year in the NetCDF file instead of
one variable per month.

Created generic procedure histwrite_phy and removed procedure
write_histins, following LMDZ. histwrite_phy has only two arguments,
can be called from anywhere, and should manage the logic of writing or
not writing into various history files with various operations. So the
test on ok_instan goes inside histwrite_phy.

Test for raz_date in phyetat0 instead of physiq to avoid side effect.

Created procedure increment_itap to avoid side effect.

Removed unnecessary differences between procedures readsulfate and
readsulfate_pi.

Revision 178 - Directory Listing
Modified Fri Mar 11 18:47:26 2016 UTC (8 years, 1 month ago) by guez

Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos,
buffer, regular from module histcom_var to modules where they are
defined.

Removed procedure ioipslmpp, useless for a sequential program.

Added argument datasz_max to histwrite_real (to avoid circular
dependency with histwrite).

Removed useless variables and computations everywhere.

Changed real litteral constants from default kind to double precision
in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu.

Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of
sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of
transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of
orosetup.

Added output of relative humidity.

Revision 175 - Directory Listing
Modified Fri Feb 5 16:02:34 2016 UTC (8 years, 2 months ago) by guez

Added argument itau_phy to ini_histins, phyetat0, phytrac and
phyredem0. Removed variable itau_phy of module temps. Avoiding side
effect in etat0 and phyetat0. The procedures ini_histins, phyetat0,
phytrac and phyredem0 are all called by physiq so there is no
cascading variable penalty.

In procedure inifilr, made the condition on colat0 weaker to allow for
rounding error.

Removed arguments flux_o, flux_g and t_slab of clmain, flux_o and
flux_g of clqh and interfsurf_hq, tslab and seaice of phyetat0 and
phyredem. NetCDF variables TSLAB and SEAICE no longer in
restartphy.nc. All these variables were related to the not-implemented
slab ocean. seaice and tslab were just set to 0 in phyetat0 and never
used nor changed. flux_o and flux_g were computed in clmain but never
used in physiq.

Removed argument swnet of clqh. Was used only to compute a local
variable, swdown, which was not used.

Revision 174 - Directory Listing
Modified Wed Nov 25 20:14:19 2015 UTC (8 years, 4 months ago) by guez

Simplifications in procedure albsno. Since veget(:, 2:) was 0,
iterations 2 to nvm of the loop computing alb_neig_grid were useless.

Useless initializations of alb_neige in procedure interfsurf_hq:
alb_neig is always computed by albsno just before being used. Useless
computation of local variable zfra in the land ice case.

Revision 171 - Directory Listing
Modified Tue Sep 29 19:48:59 2015 UTC (8 years, 6 months ago) by guez

Removed argument ierr of abort_gcm. It was always 1 and not used.

Just encapsulated pres2lev into a module.

Removed test on run_off in procedure calcul_fluxs. Useless. The test
is always done just before in interfsurf_hq.

Removed named constants rea and repsm in module suphec: never used.

Revision 157 - Directory Listing
Modified Mon Jul 20 16:01:49 2015 UTC (8 years, 9 months ago) by guez

Just encapsulated SUBROUTINE vlsplt in a module and cleaned it.

In procedure vlx, local variables dxqu and adxqu only need indices
iip2:ip1jm. Otherwise, just cleaned vlx.

Procedures dynredem0 and dynredem1 no longer have argument fichnom,
they just operate on a file named "restart.nc". The programming
guideline here is that gcm should not be more complex than it needs by
itself, other programs (ce0l etc.) just have to adapt to gcm. So ce0l
now creates files "restart.nc" and "restartphy.nc".

In order to facilitate decentralizing the writing of "restartphy.nc",
created a procedure phyredem0 out of phyredem. phyredem0 creates the
NetCDF header of "restartphy.nc" while phyredem writes the NetCDF
variables. As the global attribute itau_phy needs to be filled in
phyredem0, at the beginnig of the run, we must compute its value
instead of just using itap. So we have a dummy argument lmt_pas of
phyredem0. Also, the ncid of "startphy.nc" is upgraded from local
variable of phyetat0 to dummy argument. phyetat0 no longer closes
"startphy.nc".

Following the same decentralizing objective, the ncid of "restart.nc"
is upgraded from local variable of dynredem0 to module variable of
dynredem0_m. "restart.nc" is not closed at the end of dynredem0 nor
opened at the beginning of dynredem1.

In procedure etat0, instead of creating many vectors of size klon
which will be filled with zeroes, just create one array null_array.

In procedure phytrac, instead of writing trs(: 1) to a text file,
write it to "restartphy.nc" (following LMDZ). This is better because
now trs(: 1) is next to its coordinates. We can write to
"restartphy.nc" from phytrac directly, and not add trs(: 1) to the
long list of variables in physiq, thanks to the decentralizing of
"restartphy.nc".

In procedure phyetat0, we no longer write to standard output the
minimum and maximum values of read arrays. It is ok to check input and
abort on invalid values but just printing statistics on input seems too
much useless computation and out of place clutter.

Revision 156 - Directory Listing
Modified Thu Jul 16 17:39:10 2015 UTC (8 years, 9 months ago) by guez

In procedure cltracrn, no need for local variable zx_trs, use directly
local_trs.

In (re)startphy.nc, agglomerate variables for different surface types
into a single variable with an added dimension.

In phyredem, bring together all definitions, do not use redef.

Revision 155 - Directory Listing
Modified Wed Jul 8 17:03:45 2015 UTC (8 years, 9 months ago) by guez

Do not write any longer to startphy.nc nor read from restartphy.nc the
NetCDF variable ALBLW: it was the same than ALBE. ALBE was for the
visible and ALBLW for the near infrared. In physiq, use only variables
falbe and albsol, removed falblw and albsollw. See revision 888 of
LMDZ.

Removed unused arguments pdp of SUBROUTINE lwbv, ptave of SUBROUTINE
lwv, kuaer of SUBROUTINE lwvd, nq of SUBROUTINE initphysto.

Revision 154 - Directory Listing
Modified Tue Jul 7 17:49:23 2015 UTC (8 years, 9 months ago) by guez

Removed argument dtphys of physiq. Use it directly from comconst in
physiq instead.

Donwgraded variables eignfnu, eignfnv of module inifgn_m to dummy
arguments of SUBROUTINE inifgn. They were not used elsewhere than in
the calling procedure inifilr. Renamed argument dv of inifgn to eignval_v.

Made alboc and alboc_cd independent of the size of arguments. Now we
can call them only at indices knindex in interfsurf_hq, where we need
them. Fixed a bug in alboc_cd: rmu0 was modified, and the
corresponding actual argument in interfsurf_hq is an intent(in)
argument of interfsurf_hq.

Variables of size knon instead of klon in interfsur_lim and interfsurf_hq.

Removed argument alb_new of interfsurf_hq because it was the same than
alblw. Simplified test on cycle_diurne, following LMDZ.

Moved tests on nbapp_rad from physiq to read_clesphys2. No need for
separate counter itaprad, we can use itap. Define lmt_pas and radpas
from integer input parameters instead of real-type computed values.

Revision 130 - Directory Listing
Modified Tue Feb 24 15:43:51 2015 UTC (9 years, 1 month ago) by guez
Original Path: trunk/phylmd/Interface_surf

The information in argument rdayvrai of calfis was redundant with the
information in argument time. Furthermore, in the physics part of gcm,
we need separately the day number (an integer) and the time of
day. So, replaced real argument rdayvrai of calfis containing elapsed
time by integer argument dayvrai containing day number. Corresponding
change in leapfrog. In procedure physiq, replaced real argument
rdayvrai by integer argument dayvrai. In procedures readsulfate and
readsulfate_preind, replaced real argument r_day by arguments dayvrai
and time.

In procedure alboc, replaced real argument rjour by integer argument
jour. alboc was always called by interfsurf_hq with actual argument
real(jour), and the meaning of the dummy argument in alboc seems to be
that it should be an integer.

In procedure leapfrog, local variable time could not be > 1. Removed
test.

In physiq, replaced nint(rdayvrai) by dayvrai. This changes the
results since julien now changes at 0 h instead of 12 h. This follows
LMDZ, where the argument of ozonecm is days_elapsed+1.

Revision 118 - Directory Listing
Modified Thu Dec 18 17:30:24 2014 UTC (9 years, 4 months ago) by guez
Original Path: trunk/phylmd/Interface_surf

In file grilles_gcm.nc, renamed variable phis to orog, deleted
variable presnivs.

Removed variable bug_ozone from module clesphys.

In procedure ozonecm, moved computation of sint and cost out of the
loops on horizontal position and vertical level. Inverted the order of
the two loops. We can then move all computations from slat to aprim
out of the loop on vertical levels. Created variable slat2, following
LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12
from radlwsw to ozonecm, following LMDZ.

Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq,
pmflxr, pmflxs, prfl, psfl of phytrac.

In procedure yamada4, for all the arrays, replaced the dimension klon
by ngrid. At the end of the procedure, for the computation of kmn,kn,
kq and q2, changed the upper limit of the loop index from klon to ngrid.

In radlwsw, for the calculation of pozon, removed the factor
paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the
factor 101325.0/PPSOL(JL), as in LMDZ.

Revision 108 - Directory Listing
Modified Tue Sep 16 14:00:41 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/phylmd/Interface_surf

Imported writefield from LMDZ. Close at the end of gcm the files which
were created by writefiled (not done in LMDZ).

Removed procedures for the output of Grads files. Removed calls to
dump2d. In guide, replaced calls to wrgrads by calls to writefield.

In vlspltqs, removed redundant programming of saturation
pressure. Call foeew from module FCTTRE instead.

Bug fix in interpre: size of w exceeding size of correponding actual
argument wg in advtrac.

In leapfrog, call guide until the end of the run, instead of six hours
before the end.

Bug fix in readsulfate_preind: type of arguments.

Revision 104 - Directory Listing
Modified Thu Sep 4 10:05:52 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/phylmd/Interface_surf

Removed procedure sortvarc0. Called sortvarc with an additional
argument resetvarc instead. (Following LMDZ.) Moved current time
computations and some printing statements from sortvarc to
caldyn. Could then remove arguments itau and time_0 of sortvarc, and
could remove "use dynetat0". Better to keep "dynetat0.f" as a gcm-only
file.

Moved some variables from module ener to module sortvarc.

Split file "mathelp.f" into single-procedure files.

Removed unused argument nadv of adaptdt. Removed dimension arguments
of bernoui.

Removed unused argument nisurf of interfoce_lim. Changed the size of
argument lmt_sst of interfoce_lim from klon to knon. Removed case when
newlmt is false.

dynredem1 is called only once in each run, either ce0l or gcm. So
variable nb in call to nf95_put_var was always 1. Removed variable nb.

Removed dimension arguments of calcul_fluxs. Removed unused arguments
precip_rain, precip_snow, snow of calcul_fluxs. Changed the size of
all the arrays in calcul_fluxs from klon to knon.

Removed dimension arguments of fonte_neige. Changed the size of all
the arrays in fonte_neige from klon to knon.

Changed the size of arguments tsurf and tsurf_new of interfsurf_hq
from klon to knon. Changed the size of argument ptsrf of soil from
klon to knon.

Revision 103 - Directory Listing
Modified Fri Aug 29 13:00:05 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/phylmd/Interface_surf

Renamed module cvparam to cv_param. Deleted procedure
cv_param. Changed variables of module cv_param into parameters.

In procedures cv_driver, cv_uncompress and cv3_uncompress, removed
some arguments giving dimensions and used module variables klon and
klev instead.

In procedures gradiv2, laplacien_gam and laplacien, changed
declarations of local variables because klevel is not always klev.

Removed code for nudging surface pressure.

Removed arguments pim and pjm of tau2alpha. Added assignment of false
to variable first.

Replaced real argument del of procedures foeew and FOEDE by logical
argument.

Revision 102 - Directory Listing
Modified Tue Jul 15 13:43:24 2014 UTC (9 years, 9 months ago) by guez
Original Path: trunk/phylmd/Interface_surf

Removed unused file "condsurf.f" (only useful for ocean slab).

day_step must be a multiple of 4 * iperiod if ok_guide.

Changed type of variable online of module conf_guide_m from integer to
logical. Value -1 was not useful, equivalent to not ok_guide.

Removed argument masse of procedure guide. masse is kept consistent
with ps throughout the run. masse need only be computed again just
after ps has been modified. In prodecure guide, replaced use of
remanent variable first by test on itau. Replaced test on variable
"test" by test on integer values.

In leapfrog, for the call to guide, replaced test on real values by
test on integer values.

Bug fix in tau2alpha: computation of dxdyv (following LMDZ revision 1040).

In procedure wrgrads, replaced badly chosen argument name "if" by i_f.

Revision 101 - Directory Listing
Modified Mon Jul 7 17:45:21 2014 UTC (9 years, 9 months ago) by guez
Original Path: trunk/phylmd/Interface_surf

Removed unused files "interfoce_slab.f" and "gath2cpl.f". Removed
unused variables coastalflow and riverflow of module
interface_surf. Removed unused arguments cal, radsol, dif_grnd,
fluxlat, fluxsens, dflux_s, dflux_l of procedure fonte_neige. Removed
unused arguments tslab, seaice of procedure interfsurf_hq and
clqh. Removed unused arguments seaice of procedure clmain.

In interfsurf_hq, used variable soil_model of module clesphys2 instead
of cascading it as an argument from physiq.

In phyetat0, stop if masque not found.

Variable TS instead of "TS[0-9][0-9]" in "(re)startphy.nc", with
additional dimension nbsrf.

Revision 99 - Directory Listing
Modified Wed Jul 2 18:39:15 2014 UTC (9 years, 9 months ago) by guez
Original Path: trunk/phylmd/Interface_surf

Created procedure test_disvert (following LMDZ). Added procedures
hybrid and funcd in module disvert_m. Upgraded compute_ab from
internal procedure of disvert to module procedure. Added variables y,
ya in module disvert_m. Upgraded s from local variable of procedure
disvert to module variable.

Renamed allowed value of variable vert_sampling in procedure disvert
from "read" to "read_hybrid". Added possibility to read pressure
values, value "read_pressure". Replaced vertical distribution for
value "param" by the distribution "strato_correct" from LMDZ (but kept
the value "param"). In case "tropo", replaced 1 by dsigmin (following
LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ).

Changed computation of bp in procedure compute_ab.

Removed debugindex case in clmain. Removed useless argument rlon of
procedure clmain. Removed useless variables ytaux, ytauy of procedure
clmain.

Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure
etat0.

Removed variable ok_veget:. coupling with the model Orchid is not
possible. Removed variable ocean: modeling an ocean slab is not
possible.

Removed useless variables tmp_rriv and tmp_rcoa from module
interface_surf.

Moved initialization of variables da, mp, phi in procedure physiq to
to inside the test iflag_con >= 3.

Revision 98 - Directory Listing
Modified Tue May 13 17:23:16 2014 UTC (9 years, 11 months ago) by guez
Original Path: trunk/phylmd/Interface_surf

Split inter_barxy.f : one procedure per module, one module per
file. Grouped the files into a directory.

Split orbite.f.

Value of raz_date read from the namelist is taken into account
(resetting the step counter) even if annee_ref == anneeref and day_ref
== dayref. raz_date is no longer modified by gcm main unit. (Following
LMDZ.)

Removed argument klon of interfsur_lim. Renamed arguments lmt_alb,
lmt_rug to alb_new, z0_new (same name as corresponding actual
arguments in interfsurf_hq).

Removed argument klon of interfsurf_hq.

Removed arguments qs and d_qs of diagetpq. Were always
zero. Downgraded arguments d_qw, d_ql of diagetpq to local variables,
they were not used in physiq. Removed all computations for solid water
in diagetpq, was just zero.


Downgraded arguments fs_bound, fq_bound of diagphy to local variables,
they were not used in physiq. Encapsulated in a test on iprt all
computations in diagphy.

Removed parameter nbtr of module dimphy. Replaced it everywhere in the
program by nqmx - 2.

Removed parameter rnpb of procedure physiq. Kept the true case in
physiq and phytrac. Could not work with false case anyway.

Removed arguments klon, llm, airephy of qcheck. Removed argument ftsol
of initrrnpb, was not used.

Revision 72 - Directory Listing
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 8 months ago) by guez
Original Path: trunk/libf/phylmd/Interface_surf

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

Revision 62 - Directory Listing
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 8 months ago) by guez
Original Path: trunk/libf/phylmd/Interface_surf

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 61 - Directory Listing
Modified Fri Apr 20 14:58:43 2012 UTC (12 years ago) by guez
Original Path: trunk/libf/phylmd/Interface_surf

No more included file in LMDZE, not even "netcdf.inc".

Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.

Split module "histcom". Assembled resulting files in directory
"Histcom".

Removed aliasing in calls to "laplacien".

Revision 54 - Directory Listing
Added Tue Dec 6 15:07:04 2011 UTC (12 years, 4 months ago) by guez
Original Path: trunk/libf/phylmd/Interface_surf

Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1"
in "inidissip" by calls to intrinsic procedures.

Split file "interface_surf.f90" into a file with a module containing
only variables, "interface_surf", and single-procedure files. Gathered
files into directory "Interface_surf".

Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to
"divgrad2" and "divgrad", and "crot" to "nxgraro2" and
"nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot"
from module "inidissip_m", so it can pass them to "gradiv2",
etc. Thanks to this modification, we avoid a circular dependency
betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by
"gradiv2", for instance, during computation of eigenvalues is not the
value "cdivu" computed by "inidissip".

Extracted procedure "start_inter_3d" from module "startdyn", to its
own module.

In "inidissip", unrolled loop on "ii". I find it clearer now.

Moved variables "matriceun", "matriceus", "matricevn", "matricevs",
"matrinvn" and "matrinvs" from module "parafilt" to module
"inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu",
"jfiltsv" from module "coefils" to module "inifilr_m".

	ViewVC Help
Powered by ViewVC 1.1.21

Log of /trunk/Sources/phylmd/Interface_surf