Parent Directory | Revision Log
Sticky Revision: |
run_off_lic downgraded from variable of module interface_surf to local variable of fonte_neige. Code could not work with ok_aie set to true, so removed this possibility. tauae, piz_ae, cg_ae, topswai, solswai were then 0. cldtaupi was the same as cldtaupd. In sw and procedures called by sw, flag_aer did not need to be double precision, changed it to logical. Downgraded re and fl from arguments of newmicro to local variables. Added output of re and fl (following LMDZ).
Promoted lmt_pas from local variable of physiq to variable of module conf_gcm_m. Removed variable run_off of module interface_surf. Was not used. Called run_off_ter in LMDZ, but not used nor printed there either. Simplified logic in interfoce_lim. The way it was convoluted with interfsurf_hq and clmain was quite a mess. Extracted reading of SST into a separate procedure: read_sst. We do not need SST and pctsrf_new at the same time: SST is not needed for sea-ice surface. I did not like this programming: going through the procedure repeatedly for different purposes and testing inside whether there was something to do or it was already done. Reading is now only controlled by itap and lmt_pas, instead of debut, jour, jour_lu and deja_lu. Now we do not copy from pct_tmp to pctsrf_new every time step. Simplified processing of pctsrf in clmain and below. It was quite troubling: pctsrf_new was intent out in interfoce_lim but only defined for ocean and sea-ice. Also the idea of having arrays for all surfaces, pcsrf and pctsrf_new, in interfsurf_hq, which is called for a particular surface, was troubling. pctsrf_new for all surfaces was intent out in intefsurf_hq, but not defined for all surfaces at each call. Removed argument pctsrf_new of clmain: was a duplicate of pctsrf on output, and not used in physiq. Replaced pctsrf_new in clmain by pctsrf_new_oce and pctsrf_new_sic, which were the only ones modified.
Sources inside, compilation outside.
Removed unused files "interfoce_slab.f" and "gath2cpl.f". Removed unused variables coastalflow and riverflow of module interface_surf. Removed unused arguments cal, radsol, dif_grnd, fluxlat, fluxsens, dflux_s, dflux_l of procedure fonte_neige. Removed unused arguments tslab, seaice of procedure interfsurf_hq and clqh. Removed unused arguments seaice of procedure clmain. In interfsurf_hq, used variable soil_model of module clesphys2 instead of cascading it as an argument from physiq. In phyetat0, stop if masque not found. Variable TS instead of "TS[0-9][0-9]" in "(re)startphy.nc", with additional dimension nbsrf.
Removed unused variable tmp_rlic of module interface_surf. Removed useless call to gath2cpl in procedure interfsurf_hq. Removed then uncalled procedure gath2cpl.
Created procedure test_disvert (following LMDZ). Added procedures hybrid and funcd in module disvert_m. Upgraded compute_ab from internal procedure of disvert to module procedure. Added variables y, ya in module disvert_m. Upgraded s from local variable of procedure disvert to module variable. Renamed allowed value of variable vert_sampling in procedure disvert from "read" to "read_hybrid". Added possibility to read pressure values, value "read_pressure". Replaced vertical distribution for value "param" by the distribution "strato_correct" from LMDZ (but kept the value "param"). In case "tropo", replaced 1 by dsigmin (following LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ). Changed computation of bp in procedure compute_ab. Removed debugindex case in clmain. Removed useless argument rlon of procedure clmain. Removed useless variables ytaux, ytauy of procedure clmain. Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure etat0. Removed variable ok_veget:. coupling with the model Orchid is not possible. Removed variable ocean: modeling an ocean slab is not possible. Removed useless variables tmp_rriv and tmp_rcoa from module interface_surf. Moved initialization of variables da, mp, phi in procedure physiq to to inside the test iflag_con >= 3.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
NaN to signalling NaN in gfortran_debug.mk. Removed unused procedures in getincom and getincom2. In procedure conf_interface, replaced call to getincom by new namelist. Moved procedure conf_interface into module interface_surf. Added variables sig1 and w01 to startphy.nc and restartphy.nc, for procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and w01 in concvl and physiq. Deleted unused arguments of clmain, clqh and intersurf_hq, among which (y)?sollwdown. Following LMDZ, in physiq, read sollw instead of sollwdown from startphy.nc, write sollw instead of sollwdown to restartphy.nc. In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade and ok_aie are false. (Following LMDZ.) Added dimension klev to startphy.nc and restartphy.nc, and deleted dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and rnebcon for vertical levels >=2. Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)
Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1" in "inidissip" by calls to intrinsic procedures. Split file "interface_surf.f90" into a file with a module containing only variables, "interface_surf", and single-procedure files. Gathered files into directory "Interface_surf". Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to "divgrad2" and "divgrad", and "crot" to "nxgraro2" and "nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot" from module "inidissip_m", so it can pass them to "gradiv2", etc. Thanks to this modification, we avoid a circular dependency betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by "gradiv2", for instance, during computation of eigenvalues is not the value "cdivu" computed by "inidissip". Extracted procedure "start_inter_3d" from module "startdyn", to its own module. In "inidissip", unrolled loop on "ii". I find it clearer now. Moved variables "matriceun", "matriceus", "matricevn", "matricevs", "matrinvn" and "matrinvs" from module "parafilt" to module "inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu", "jfiltsv" from module "coefils" to module "inifilr_m".
"start_init_phys" is now called directly by "etat0" instead of through "start_init_dyn". "qsol_2d" is no longer a variable of module "start_init_phys_m", it is an argument of "start_init_phys". "start_init_dyn" now receives "tsol_2d" from "etat0". Split file "vlspltqs.f" into "vlspltqs.f90", "vlxqs.f90" and ""vlyqs.f90". In "start_init_orog", replaced calls to "flin*" by calls to NetCDF95.
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
Corrected bug as directed by Jean-Yves Grandpeix. "nent" in "cv3_mixing" is an argument instead of a local variable.
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.21 |