Parent Directory | Revision Log
Sticky Revision: |
clcdrag is no longer used in LMDZ. Replaced by cdrag in LMDZ. In cdrag in LMDZ, zxli is a symbolic constant, false. So removed case zxli true in LMDZE. read_sst is called zero (if no ocean point on the whole planet) time or once per call of physiq. If mod(itap - 1, lmt_pas) == 0 then we have advanced in time of lmt_pas and deja_lu is necessarily false. qsat[sl] and dqsat[sl] were never called. Added output of qsurf in histins, following LMDZ. Last dummy argument dtime of phystokenc is always the same as first dummy argument pdtphys, removed dtime. Removed make rules for nag_xref95, since it does not exist any longer.
Promoted lmt_pas from local variable of physiq to variable of module conf_gcm_m. Removed variable run_off of module interface_surf. Was not used. Called run_off_ter in LMDZ, but not used nor printed there either. Simplified logic in interfoce_lim. The way it was convoluted with interfsurf_hq and clmain was quite a mess. Extracted reading of SST into a separate procedure: read_sst. We do not need SST and pctsrf_new at the same time: SST is not needed for sea-ice surface. I did not like this programming: going through the procedure repeatedly for different purposes and testing inside whether there was something to do or it was already done. Reading is now only controlled by itap and lmt_pas, instead of debut, jour, jour_lu and deja_lu. Now we do not copy from pct_tmp to pctsrf_new every time step. Simplified processing of pctsrf in clmain and below. It was quite troubling: pctsrf_new was intent out in interfoce_lim but only defined for ocean and sea-ice. Also the idea of having arrays for all surfaces, pcsrf and pctsrf_new, in interfsurf_hq, which is called for a particular surface, was troubling. pctsrf_new for all surfaces was intent out in intefsurf_hq, but not defined for all surfaces at each call. Removed argument pctsrf_new of clmain: was a duplicate of pctsrf on output, and not used in physiq. Replaced pctsrf_new in clmain by pctsrf_new_oce and pctsrf_new_sic, which were the only ones modified.
Extracted the call to read_comdissnew out of conf_gcm. Made ok_instan a variable of module clesphys, itau_phy a variable of module phyetat0_m, nid_ins a variable of module ini_histins_m, itap a variable of new module time_phylmdz, so that histwrite_phy can be called from any procedure without the need to cascade those variables into that procedure. Made itau_w a variable of module time_phylmdz so that it is computed only once per time step of physics. Extracted variables of module clesphys which were in namelist conf_phys_nml into their own namelist, clesphys_nml, and created procedure read_clesphys reading clesphys_nml, to avoid side effect. No need for double precision in procedure getso4fromfile. Assume there is a single variable for the whole year in the NetCDF file instead of one variable per month. Created generic procedure histwrite_phy and removed procedure write_histins, following LMDZ. histwrite_phy has only two arguments, can be called from anywhere, and should manage the logic of writing or not writing into various history files with various operations. So the test on ok_instan goes inside histwrite_phy. Test for raz_date in phyetat0 instead of physiq to avoid side effect. Created procedure increment_itap to avoid side effect. Removed unnecessary differences between procedures readsulfate and readsulfate_pi.
Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos, buffer, regular from module histcom_var to modules where they are defined. Removed procedure ioipslmpp, useless for a sequential program. Added argument datasz_max to histwrite_real (to avoid circular dependency with histwrite). Removed useless variables and computations everywhere. Changed real litteral constants from default kind to double precision in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu. Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of orosetup. Added output of relative humidity.
Added argument itau_phy to ini_histins, phyetat0, phytrac and phyredem0. Removed variable itau_phy of module temps. Avoiding side effect in etat0 and phyetat0. The procedures ini_histins, phyetat0, phytrac and phyredem0 are all called by physiq so there is no cascading variable penalty. In procedure inifilr, made the condition on colat0 weaker to allow for rounding error. Removed arguments flux_o, flux_g and t_slab of clmain, flux_o and flux_g of clqh and interfsurf_hq, tslab and seaice of phyetat0 and phyredem. NetCDF variables TSLAB and SEAICE no longer in restartphy.nc. All these variables were related to the not-implemented slab ocean. seaice and tslab were just set to 0 in phyetat0 and never used nor changed. flux_o and flux_g were computed in clmain but never used in physiq. Removed argument swnet of clqh. Was used only to compute a local variable, swdown, which was not used.
Sources inside, compilation outside.
Removed arguments klon, knon of interfoce_lim. Removed argument knon of interfsur_lim.
Removed procedure sortvarc0. Called sortvarc with an additional argument resetvarc instead. (Following LMDZ.) Moved current time computations and some printing statements from sortvarc to caldyn. Could then remove arguments itau and time_0 of sortvarc, and could remove "use dynetat0". Better to keep "dynetat0.f" as a gcm-only file. Moved some variables from module ener to module sortvarc. Split file "mathelp.f" into single-procedure files. Removed unused argument nadv of adaptdt. Removed dimension arguments of bernoui. Removed unused argument nisurf of interfoce_lim. Changed the size of argument lmt_sst of interfoce_lim from klon to knon. Removed case when newlmt is false. dynredem1 is called only once in each run, either ce0l or gcm. So variable nb in call to nf95_put_var was always 1. Removed variable nb. Removed dimension arguments of calcul_fluxs. Removed unused arguments precip_rain, precip_snow, snow of calcul_fluxs. Changed the size of all the arrays in calcul_fluxs from klon to knon. Removed dimension arguments of fonte_neige. Changed the size of all the arrays in fonte_neige from klon to knon. Changed the size of arguments tsurf and tsurf_new of interfsurf_hq from klon to knon. Changed the size of argument ptsrf of soil from klon to knon.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
No more included file in LMDZE, not even "netcdf.inc". Created a variable containing the list of common source files in GNUmakefile. So we now also see clearly files that are specific to each program. Split module "histcom". Assembled resulting files in directory "Histcom". Removed aliasing in calls to "laplacien".
Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1" in "inidissip" by calls to intrinsic procedures. Split file "interface_surf.f90" into a file with a module containing only variables, "interface_surf", and single-procedure files. Gathered files into directory "Interface_surf". Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to "divgrad2" and "divgrad", and "crot" to "nxgraro2" and "nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot" from module "inidissip_m", so it can pass them to "gradiv2", etc. Thanks to this modification, we avoid a circular dependency betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by "gradiv2", for instance, during computation of eigenvalues is not the value "cdivu" computed by "inidissip". Extracted procedure "start_inter_3d" from module "startdyn", to its own module. In "inidissip", unrolled loop on "ii". I find it clearer now. Moved variables "matriceun", "matriceus", "matricevn", "matricevs", "matrinvn" and "matrinvs" from module "parafilt" to module "inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu", "jfiltsv" from module "coefils" to module "inifilr_m".
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.21 |