Parent Directory
| 
Revision Log
| Sticky Revision: |
LMDZE is now in Fortran 2003 (use of allocatable arguments). gradsdef was not used. Change names: [uv]10m to [uv]10m_srf in clmain, y[uv]1 to [uv]1lay. Remove useless complication: zx_alf[12]. Do not modify [uv]1lay after initial definition from [uv]. Add [uv]10m_srf to output. Change names in physiq: [uv]10m to [uv]10m_srf, z[uv]10m to [uv]10m, corresponding to NetCDF output names. Remove unused complication couchelimite and useless variable inirnpb in phytrac.
Replaced call to regr1_step_av by call to regr1_conserv.
dynetat0 read rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d from "start.nc" and then these variables were overwritten by inigeom. Corrected this. Now, inigeom does not compute rlonu, rlatu, rlonv and rlatv. Moreover, cu_2d, cv_2d, aire_2d are not written to "restart.nc". Since xprimu, xprimv, xprimm025, xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 are computed at the same time as rlonu, rlatu, rlonv, rlatv, and since it would not be convenient to separate those computations, we decide to write xprimu, xprimv, xprimm025, xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 into "restart.nc", read them from "start.nc" and not compute them in inigeom. So, in summary, "start.nc" contains all the coordinates and their derivatives, and inigeom only computes the 2D-variables. Technical details: Moved variables rlatu, rlonv, rlonu, rlatv, xprimu, xprimv from module comgeom to module dynetat0_m. Upgraded local variables rlatu1, yprimu1, rlatu2, yprimu2, xprimm025, xprimp025 of procedure inigeom to variables of module dynetat0_m. Removed unused local variable yprimu of procedure inigeom and corresponding argument yyprimu of fyhyp. Moved variables clat, clon, grossismx, grossismy, dzoomx, dzoomy, taux, tauy from module serre to module dynetat0_m (since they are read from "start.nc"). The default values are now defined in read_serre instead of in the declarations. Changed name of module serre to read_serre_m, no more module variable here. The calls to fxhyp and fyhyp are moved from inigeom to etat0. Side effects in programs other than gcm: etat0 and read_serre write variables of module dynetat0; the programs test_fxyp and test_inter_barxy need more source files. Removed unused arguments len and nd of cv3_tracer. Removed unused argument PPSOL of LWU. Bug fix in test_inter_barxy: forgotten call to read_serre.
Sources inside, compilation outside.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
No more included file in LMDZE, not even "netcdf.inc". Created a variable containing the list of common source files in GNUmakefile. So we now also see clearly files that are specific to each program. Split module "histcom". Assembled resulting files in directory "Histcom". Removed aliasing in calls to "laplacien".
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
Replaced calls to "flinget" by calls to "NetCDF95".
Split "thermcell.f" and "cv3_routines.f". Removed copies of files that are now in "L_util". Moved "mva9" and "diagetpq" to their own files. Unified variable names across procedures.
"pi" comes from "nr_util". Removed subroutine "initialize" in module "comconst". Copied the content of "fxy_sin.h" into "fxysinus", instead of getting it from an "include" line. Removed file "fxy_sin.h". "ps" has rank 2 in "gcm" and "dynetat0". Assumed-shape for argument "q" of "integrd".
Now using the library "NR_util".
Split "orografi.f": one file for each procedure. Put the created files in new directory "Orography". Removed argument "vcov" of procedure "sortvarc". Removed arguments "itau" and "time" of procedure "caldyn0". Removed arguments "itau", "time" and "vcov" of procedure "sortvarc0". Removed argument "time" of procedure "dynredem1". Removed NetCDF variable "temps" in files "start.nc" and "restart.nc", because its value is always 0. Removed argument "nq" of procedures "iniadvtrac" and "leapfrog". The number of "tracers read in "traceur.def" must now be equal to "nqmx", or "nqmx" must equal 4 if there is no file "traceur.def". Replaced variable "nq" by constant "nqmx" in "leapfrog". NetCDF variable for ozone field in "coefoz.nc" must now be called "tro3" instead of "r". Fixed bug in "zenang".
Superficial modifications
-- Minor change of behaviour: "etat0" does not compute "rugsrel" nor "radpas". Deleted arguments "radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of "phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In "physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program "etat0_lim" does not use "clesphys2". -- Minor modification of input/output: Created subroutine "read_clesphys2". Variables of "clesphys2" are read in "read_clesphys2" instead of "conf_gcm". "printflag" does not print variables of "clesphys2". -- Should not change any result at run time: References to module "numer_rec" instead of individual modules of "Numer_rec_Lionel". Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm", "leapfrog", "phyetat0". Deleted variable "clesphy0" in "gcm". "phyetat0" does not modify variables of "clesphys2". The program unit "gcm" does not modify "itau_phy". Added some "intent" attributes. "regr11_lint" does not call "polint".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
New variables "*_dir" in "g95.mk". Corrected some bugs: "etat0_lim" works, but not "gcm".
This revision is not in working order. Pending some moving of files. Moving files around.
This revision is not in working order. Pending some moving of files. Important changes. In the program "etat0_lim": ozone coefficients from Mobidic are regridded in time instead of pressure ; consequences in "etat0". In the program "gcm", ozone coefficients from Mobidic are read once per day only for the current day and regridded in pressure ; consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and "regr_pr_comb_coefoz_m". NetCDF95 is a library and does not export NetCDF. New variables "nag_gl_options", "nag_fcalls_options" and "nag_cross_options" in "nag_tools.mk". "check_coefoz.jnl" rewritten entirely for new version of "coefoz_LMDZ.nc". Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk". Added some "intent" attributes in "calfis", "clmain", "clqh", "cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD", "nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind" and "undefSTD". In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of 1. "phis" has assumed shape in "dynredem0". Added module containing "dynredem0". Changed some calls with NetCDF Fortran 77 interface to calls with NetCDF95 interface. Replaced calls to "ssum" by calls to "sum" in "inigeom". In "make.sh", new option "-c" to change compiler. In "aaam_bud", argument "rjour" deleted. In "physiq": renamed some variables; deleted variable "xjour". In "phytrac": renamed some variables; new argument "lmt_pas".
Cosmetic changes
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |