Parent Directory | Revision Log
Sticky Revision: |
LMDZE is now in Fortran 2003 (use of allocatable arguments). gradsdef was not used. Change names: [uv]10m to [uv]10m_srf in clmain, y[uv]1 to [uv]1lay. Remove useless complication: zx_alf[12]. Do not modify [uv]1lay after initial definition from [uv]. Add [uv]10m_srf to output. Change names in physiq: [uv]10m to [uv]10m_srf, z[uv]10m to [uv]10m, corresponding to NetCDF output names. Remove unused complication couchelimite and useless variable inirnpb in phytrac.
Sources inside, compilation outside.
Removed arguments day0, anne0 of procedures initdynav and inithist. Use directly day_ref, annee_ref instead. Moved variables annee_ref, day_ref of module temps to module dynetat0_m. Deleted variables dayref and anneeref of module conf_gcm_m and removed them from namelist conf_gcm_nml. These variables were troubling intermediary on the way to annee_ref and day_ref. Gave as default values to annee_ref and day_ref the default values of dayref and anneeref. Moved the test on raz_date from main unit gcm to procedure dynetat0. Created namelist dynetat0_nml. Read annee_ref and day_ref from standard input in dynetat0 and redefine them from "start.nc" if not raz_date. Rationale: 1 - Choose the best programming from the point of view of program gcm only, forgetting program ce0l. 2 - The normal case is to define annee_ref and day_ref from "start.nc" so put them in module dynetat0_m rather than in conf_gcm_m. 3 - Try to always read the same namelists in the same order regardless of choices in previous namelists. Downsides: 1 -We now need the file "dynetat0.f" for the program ce0l, because dynetat0_m is used by dynredem0. 2 - We need to define annee_ref and day_ref from procedure etat0. Removed useless variable day_end of module temps.
Module pressure_var is now only used in gcm. Created local variables pls and p3d in etat0, added argument p3d to regr_pr_o3. In leapfrog, moved computation of p3d and exner function immediately after integrd, for clarity (does not change the execution). Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra, tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress; ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt, dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver Removed argument d_tra and computation of d_tra in concvl. Removed argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just set to 0 in cv_driver, associated to d_tra in concvl, and set again to zero in concvl.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
No more included file in LMDZE, not even "netcdf.inc". Created a variable containing the list of common source files in GNUmakefile. So we now also see clearly files that are specific to each program. Split module "histcom". Assembled resulting files in directory "Histcom". Removed aliasing in calls to "laplacien".
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
Replaced calls to "flinget" by calls to "NetCDF95".
Split "thermcell.f" and "cv3_routines.f". Removed copies of files that are now in "L_util". Moved "mva9" and "diagetpq" to their own files. Unified variable names across procedures.
Now using the library "NR_util".
Superficial modifications
Deleted argument "presnivs" of "physiq", "ini_histhf", "ini_histhf3d", "ini_histday", "ini_histins", "ini_histrac", "phytrac". Access it from "comvert" instead. Replaced calls to NetCDF Fortran 77 interface by calls to Fortran 90 interface or to NetCDF95. Procedure "gr_phy_write_3d" now works with a variable of arbitrary size in the second dimension. Annotated use statements with "only" clause. Replaced calls to NetCDF interface version 2 by calls to Fortran 90 interface in "guide.f90" and "read_reanalyse.f". In "write_histrac", replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d" and "gr_phy_write_3d".
Inlined procedures "regr_pr_av" and "regr_pr_int" in "regr_pr_o3", "regr_pr_av_coefoz" and "regr_pr_int_coefoz".
-- Minor change of behaviour: "etat0" does not compute "rugsrel" nor "radpas". Deleted arguments "radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of "phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In "physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program "etat0_lim" does not use "clesphys2". -- Minor modification of input/output: Created subroutine "read_clesphys2". Variables of "clesphys2" are read in "read_clesphys2" instead of "conf_gcm". "printflag" does not print variables of "clesphys2". -- Should not change any result at run time: References to module "numer_rec" instead of individual modules of "Numer_rec_Lionel". Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm", "leapfrog", "phyetat0". Deleted variable "clesphy0" in "gcm". "phyetat0" does not modify variables of "clesphys2". The program unit "gcm" does not modify "itau_phy". Added some "intent" attributes. "regr11_lint" does not call "polint".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
This revision is not in working order. Pending some moving of files. Moving files around.
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.21 |