[lmdze] Log of /trunk/Sources/phylmd/Radlwsw

Revision 139 - Directory Listing
Modified Tue May 26 17:46:03 2015 UTC (8 years, 11 months ago) by guez

dynetat0 read rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d from
"start.nc" and then these variables were overwritten by
inigeom. Corrected this. Now, inigeom does not compute rlonu, rlatu,
rlonv and rlatv. Moreover, cu_2d, cv_2d, aire_2d are not written to
"restart.nc". Since xprimu, xprimv, xprimm025, xprimp025, rlatu1,
rlatu2, yprimu1, yprimu2 are computed at the same time as rlonu,
rlatu, rlonv, rlatv, and since it would not be convenient to separate
those computations, we decide to write xprimu, xprimv, xprimm025,
xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 into "restart.nc", read
them from "start.nc" and not compute them in inigeom. So, in summary,
"start.nc" contains all the coordinates and their derivatives, and
inigeom only computes the 2D-variables.

Technical details:

Moved variables rlatu, rlonv, rlonu, rlatv, xprimu, xprimv from module
comgeom to module dynetat0_m. Upgraded local variables rlatu1,
yprimu1, rlatu2, yprimu2, xprimm025, xprimp025 of procedure inigeom to
variables of module dynetat0_m.

Removed unused local variable yprimu of procedure inigeom and
corresponding argument yyprimu of fyhyp.

Moved variables clat, clon, grossismx, grossismy, dzoomx, dzoomy,
taux, tauy from module serre to module dynetat0_m (since they are read
from "start.nc"). The default values are now defined in read_serre
instead of in the declarations. Changed name of module serre to
read_serre_m, no more module variable here.

The calls to fxhyp and fyhyp are moved from inigeom to etat0.

Side effects in programs other than gcm: etat0 and read_serre write
variables of module dynetat0; the programs test_fxyp and
test_inter_barxy need more source files.

Removed unused arguments len and nd of cv3_tracer. Removed unused
argument PPSOL of LWU.

Bug fix in test_inter_barxy: forgotten call to read_serre.

Revision 118 - Directory Listing
Modified Thu Dec 18 17:30:24 2014 UTC (9 years, 5 months ago) by guez
Original Path: trunk/phylmd/Radlwsw

In file grilles_gcm.nc, renamed variable phis to orog, deleted
variable presnivs.

Removed variable bug_ozone from module clesphys.

In procedure ozonecm, moved computation of sint and cost out of the
loops on horizontal position and vertical level. Inverted the order of
the two loops. We can then move all computations from slat to aprim
out of the loop on vertical levels. Created variable slat2, following
LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12
from radlwsw to ozonecm, following LMDZ.

Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq,
pmflxr, pmflxs, prfl, psfl of phytrac.

In procedure yamada4, for all the arrays, replaced the dimension klon
by ngrid. At the end of the procedure, for the computation of kmn,kn,
kq and q2, changed the upper limit of the loop index from klon to ngrid.

In radlwsw, for the calculation of pozon, removed the factor
paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the
factor 101325.0/PPSOL(JL), as in LMDZ.

Revision 81 - Directory Listing
Modified Wed Mar 5 14:38:41 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/phylmd/Radlwsw

 Converted to free source form files which were still in fixed source
form. The conversion was done using the polish mode of the NAG Fortran
Compiler.

In addition to converting to free source form, the processing of the
files also:

-- indented the code (including comments);

-- set Fortran keywords to uppercase, and set all other identifiers
to lower case;

-- added qualifiers to end statements (for example "end subroutine
conflx", instead of "end");

-- changed the terminating statements of all DO loops so that each
loop ends with an ENDDO statement (instead of a labeled continue).

Revision 72 - Directory Listing
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

Revision 71 - Directory Listing
Modified Mon Jul 8 18:12:18 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

No reason to call inidissip in ce0l.

In inidissip, set random seed to 1 beacuse PGI compiler does not
accept all zeros.

dq was computed needlessly in caladvtrac. Arguments masse and dq of
calfis not used.

Replaced real*8 by double precision.

Pass arrays with inverted order of vertical levels to conflx instead
of creating local variables for this inside conflx.

Revision 70 - Directory Listing
Modified Mon Jun 24 15:39:52 2013 UTC (10 years, 11 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.

In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".

Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".

In "hgardfou", print only the first temperature out of range found.

Revision 69 - Directory Listing
Modified Mon Feb 18 16:33:12 2013 UTC (11 years, 3 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from
module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and
rad_chau2 from module nuagecom to module conf_phys_m.

Read clesphys2_nml from conf_phys instead of gcm.

Removed argument iflag_con from several procedures. Access module
variable instead.

Revision 62 - Directory Listing
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 9 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 52 - Directory Listing
Modified Fri Sep 23 12:28:01 2011 UTC (12 years, 8 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

Split "conflx.f" into single-procedure files in directory "Conflx".

Split "cv_routines.f" into single-procedure files in directory
"CV_routines". Made module "cvparam" from included file
"cvparam.h". No included file other than "netcdf.inc" left in LMDZE.

Revision 38 - Directory Listing
Modified Thu Jan 6 17:52:19 2011 UTC (13 years, 4 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

Extracted ASCII art from "inigeom" into a separate text file in the
documentation.

"test_disvert" now creates a separate file for layer thicknesses.

Moved variables from module "yomcst" to module "suphec_m" because this
is where those variables are defined. Kept in "yomcst" only parameters
of Earth orbit. Gave the attribute "parameter" to some variables of
module "suphec_m".

Variables of module "yoethf" were defined in procedure "suphec". Moved
these definitions to a new procedure "yoethf" in module "yoethf_m".

	ViewVC Help
Powered by ViewVC 1.1.21