Parent Directory
| 
Revision Log
| Sticky Revision: |
In interfsurf_hq, changed names of variables : tsurf becomes ts (name of actual argument), tsurf_temp can then become simply tsurf.
The program did not work with cycle_diurne set to false. mu0 in physiq, which is supposed to be a cosine, was set to -999.999. So prmu in swu had a value of the order of 1e3. So zrmum1 in sw2s had a value of the order of 1e3. So zrayl in sw2s had a value of the order of 1e15. So ztray and ptauaz in swclr also had a large value. So zcorae at line 138 in swclr had a large negative value, which resulted in overflow at line 138. This assignment of -999.999 to mu0 dates from somewhere between revisions 348 and 524 of LMDZ. It was corrected in revision 1068 of LMDZ with a call to angle which was present in revision 348. However, procedure angle was removed from LMDZE in revision 22 because it was not used. Hesitated to bring back angle but, finally, just removed the option of having no diurnal cycle.
Module academic was not used. Useful values for iflag_phys were only 0 and 1 so changed type to logical. Definition of fmagic was duplicated in procedures alboc and alboc_cd so moved it up to interfsurf_hq and also moved multiplication by fmagic (following LMDZ).
Replaced integer variable iflag_con of module clesphys2 by logical variable conv_emanuel.
Removed argument dtphys of physiq. Use it directly from comconst in physiq instead. Donwgraded variables eignfnu, eignfnv of module inifgn_m to dummy arguments of SUBROUTINE inifgn. They were not used elsewhere than in the calling procedure inifilr. Renamed argument dv of inifgn to eignval_v. Made alboc and alboc_cd independent of the size of arguments. Now we can call them only at indices knindex in interfsurf_hq, where we need them. Fixed a bug in alboc_cd: rmu0 was modified, and the corresponding actual argument in interfsurf_hq is an intent(in) argument of interfsurf_hq. Variables of size knon instead of klon in interfsur_lim and interfsurf_hq. Removed argument alb_new of interfsurf_hq because it was the same than alblw. Simplified test on cycle_diurne, following LMDZ. Moved tests on nbapp_rad from physiq to read_clesphys2. No need for separate counter itaprad, we can use itap. Define lmt_pas and radpas from integer input parameters instead of real-type computed values.
Sources inside, compilation outside.
In file grilles_gcm.nc, renamed variable phis to orog, deleted variable presnivs. Removed variable bug_ozone from module clesphys. In procedure ozonecm, moved computation of sint and cost out of the loops on horizontal position and vertical level. Inverted the order of the two loops. We can then move all computations from slat to aprim out of the loop on vertical levels. Created variable slat2, following LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12 from radlwsw to ozonecm, following LMDZ. Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq, pmflxr, pmflxs, prfl, psfl of phytrac. In procedure yamada4, for all the arrays, replaced the dimension klon by ngrid. At the end of the procedure, for the computation of kmn,kn, kq and q2, changed the upper limit of the loop index from klon to ngrid. In radlwsw, for the calculation of pozon, removed the factor paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the factor 101325.0/PPSOL(JL), as in LMDZ.
Renamed module cvparam to cv_param. Deleted procedure cv_param. Changed variables of module cv_param into parameters. In procedures cv_driver, cv_uncompress and cv3_uncompress, removed some arguments giving dimensions and used module variables klon and klev instead. In procedures gradiv2, laplacien_gam and laplacien, changed declarations of local variables because klevel is not always klev. Removed code for nudging surface pressure. Removed arguments pim and pjm of tau2alpha. Added assignment of false to variable first. Replaced real argument del of procedures foeew and FOEDE by logical argument.
Created procedure test_disvert (following LMDZ). Added procedures hybrid and funcd in module disvert_m. Upgraded compute_ab from internal procedure of disvert to module procedure. Added variables y, ya in module disvert_m. Upgraded s from local variable of procedure disvert to module variable. Renamed allowed value of variable vert_sampling in procedure disvert from "read" to "read_hybrid". Added possibility to read pressure values, value "read_pressure". Replaced vertical distribution for value "param" by the distribution "strato_correct" from LMDZ (but kept the value "param"). In case "tropo", replaced 1 by dsigmin (following LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ). Changed computation of bp in procedure compute_ab. Removed debugindex case in clmain. Removed useless argument rlon of procedure clmain. Removed useless variables ytaux, ytauy of procedure clmain. Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure etat0. Removed variable ok_veget:. coupling with the model Orchid is not possible. Removed variable ocean: modeling an ocean slab is not possible. Removed useless variables tmp_rriv and tmp_rcoa from module interface_surf. Moved initialization of variables da, mp, phi in procedure physiq to to inside the test iflag_con >= 3.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and rad_chau2 from module nuagecom to module conf_phys_m. Read clesphys2_nml from conf_phys instead of gcm. Removed argument iflag_con from several procedures. Access module variable instead.
Write used namelists to file "" instead of standard output. Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate dimension to arrays so they have rank 3, like the dummy arguments in "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Extract the initialization part from "bilan_dyn" and make a separate procedure, "init_dynzon", from it. Move variables from modules "iniprint" and "logic" to module "conf_gcm_m". Promote internal procedures of "fxy" to private procedures of module "fxy_m". Extracted documentation from "inigeom". Removed useless "save" attributes. Removed useless intermediate variables. Extracted processing of poles from loop on latitudes. Write coordinates to file "longitude_latitude.txt" instead of standard output. Do not use ozone tracer for radiative transfer.
Split "getincom.f90" into "getincom.f90" and "getincom2.f90". Split "nuage.f" into "nuage.f90", "diagcld1.f90" and "diagcld2.f90". Created module "chem" from included file "chem.h". Moved "YOEGWD.f90" to directory "Orography". In "physiq", for evaporation of water, "zlsdcp" was equal to "zlvdc". Removed useless variables.
-- Minor change of behaviour: "etat0" does not compute "rugsrel" nor "radpas". Deleted arguments "radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of "phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In "physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program "etat0_lim" does not use "clesphys2". -- Minor modification of input/output: Created subroutine "read_clesphys2". Variables of "clesphys2" are read in "read_clesphys2" instead of "conf_gcm". "printflag" does not print variables of "clesphys2". -- Should not change any result at run time: References to module "numer_rec" instead of individual modules of "Numer_rec_Lionel". Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm", "leapfrog", "phyetat0". Deleted variable "clesphy0" in "gcm". "phyetat0" does not modify variables of "clesphys2". The program unit "gcm" does not modify "itau_phy". Added some "intent" attributes. "regr11_lint" does not call "polint".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |