Parent Directory | Revision Log
Sticky Revision: |
Removed dimension klev of flux_[tquv] and y_flux_[tquv] in clmain. Removed dimension klev of flux_[tquv] in physiq. Removed dimension klev of flux_[tq] in hbtm. Removed dimension klev of flux_[tq] in clqh and computations for layers other than the surface layer. Removed dimension klev of flux_v in clvent and computations for layers other than the surface layer. Values for layers other than the surface layer were not used nor output (not even in LMDZ). Removed argument dnwd0 of concvl. Simply write - mp in physiq (following LMDZ). Removed useless intermediary variables zxflux[tquv] in physiq.
dnwd0 is just - mp. Compute it simply in concvl. da, phi and mp were set to 0 in physiq before the call to concvl. Clearer to set da1, phi1 and mp1 to 0 in cv_driver so they are intent out. qcheck was debugging, printed to standard output and was called several times per time step of physics. zxtsol was a duplicate of ztsol.
In cv30_feed, iflag1 is 0 on entry so we can simplify the test for iflag1 = 7. In cv30_feed, for the computation of icb, replaced sequential search (with a useless end of loop on k) by a call to locate. In CV30 routines, replaced len, nloc, nd, na by klon or klev. Philosophy: no more generality than actually necessary. Converted as many variables as possible to named constants in cv30_param_m and downgraded pbcrit, ptcrit, dtovsh, dpbase, dttrig, tau, delta to local objects in procedures. spfac, betad and omtrain are useless and removed. Instead of filling the array sigp with the constant spfac in cv30_undilute2, just made sigp a constant in cv30_unsat. In cv_driver, define as allocatable variables that are only used on the range (ncum, nl).
There was a function gr_phy_write_3d in dyn3d and a function gr_phy_write_2d in module grid_change. Moved them into a new module gr_phy_write_m under a generic interface gr_phy_write. Replaced calls to gr_fi_ecrit by calls to gr_phy_write. Removed arguments len, nloc and nd of cv30_compress. Removed arguments wd and wd1 of cv30_uncompress, wd of cv30_yield, wd of concvl, wd1 of cv_driver. Was just filled with 0. Removed option ok_gust in physiq, never used. In cv30_unsat, cv30_yield and cv_driver, we only need to define b to level nl - 1.
Removed argument snow_con of concvl. Just set snow_con to 0 in physiq instead of in concvl. Removed unused argument cbmf1 of cv_driver. Added computation and output of ptop (following LMDZ).
In procedure concvl, renamed arguments snow to snow_con and ktop to itop_con (names of corresponding actual arguments in physiq). Removed useless argument pmflxs. Removed the alternative between iflag_con == 3 or 4, the same computations were done in both cases.
Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos, buffer, regular from module histcom_var to modules where they are defined. Removed procedure ioipslmpp, useless for a sequential program. Added argument datasz_max to histwrite_real (to avoid circular dependency with histwrite). Removed useless variables and computations everywhere. Changed real litteral constants from default kind to double precision in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu. Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of orosetup. Added output of relative humidity.
Removed the option to use PPM3D advection schemes. This looks really bugged. In particular, in ppm3d: do i=1,IMR*JMR CRY(i,2) = DTDY*V(i,1,k) end do while cry is declared as: real CRY(IMR,JNP) and: jmr = jnp - 1 Also removed options for Slopes and Prather advection schemes. This does not look functional. It seems it needs tracers inside tracers. Also removed allowed values 1 and 2 for iadv in iniadvtrac. These are not implemented in advtrac. With the removal of PPM3D, there is no longer any need to distinguish between hadv and vadv in iniadvtrac.
Sources inside, compilation outside.
Renamed module cvparam to cv_param. Deleted procedure cv_param. Changed variables of module cv_param into parameters. In procedures cv_driver, cv_uncompress and cv3_uncompress, removed some arguments giving dimensions and used module variables klon and klev instead. In procedures gradiv2, laplacien_gam and laplacien, changed declarations of local variables because klevel is not always klev. Removed code for nudging surface pressure. Removed arguments pim and pjm of tau2alpha. Added assignment of false to variable first. Replaced real argument del of procedures foeew and FOEDE by logical argument.
Created procedure test_disvert (following LMDZ). Added procedures hybrid and funcd in module disvert_m. Upgraded compute_ab from internal procedure of disvert to module procedure. Added variables y, ya in module disvert_m. Upgraded s from local variable of procedure disvert to module variable. Renamed allowed value of variable vert_sampling in procedure disvert from "read" to "read_hybrid". Added possibility to read pressure values, value "read_pressure". Replaced vertical distribution for value "param" by the distribution "strato_correct" from LMDZ (but kept the value "param"). In case "tropo", replaced 1 by dsigmin (following LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ). Changed computation of bp in procedure compute_ab. Removed debugindex case in clmain. Removed useless argument rlon of procedure clmain. Removed useless variables ytaux, ytauy of procedure clmain. Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure etat0. Removed variable ok_veget:. coupling with the model Orchid is not possible. Removed variable ocean: modeling an ocean slab is not possible. Removed useless variables tmp_rriv and tmp_rcoa from module interface_surf. Moved initialization of variables da, mp, phi in procedure physiq to to inside the test iflag_con >= 3.
Module pressure_var is now only used in gcm. Created local variables pls and p3d in etat0, added argument p3d to regr_pr_o3. In leapfrog, moved computation of p3d and exner function immediately after integrd, for clarity (does not change the execution). Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra, tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress; ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt, dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver Removed argument d_tra and computation of d_tra in concvl. Removed argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just set to 0 in cv_driver, associated to d_tra in concvl, and set again to zero in concvl.
Removed unused variables lock_startdate and time_stamp of module calendar. Noticed that physiq does not change the surface pressure. So removed arguments ps and dpfi of subroutine addfi. dpfi was always 0. The computation of ps in addfi included some averaging at the poles. In principle, this does not change ps but in practice it does because of finite numerical precision. So the results of the simulation are changed. Removed arguments ps and dpfi of calfis. Removed argument d_ps of physiq. du at the poles is not computed by dudv1, so declare only the corresponding latitudes in dudv1. caldyn passes only a section of the array dudyn as argument. Removed variable niadv of module iniadvtrac_m. Declared arguments of exner_hyb as assumed-shape arrays and made all other horizontal sizes in exner_hyb dynamic. This allows the external program test_disvert to use exner_hyb at a single horizontal position.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
NaN to signalling NaN in gfortran_debug.mk. Removed unused procedures in getincom and getincom2. In procedure conf_interface, replaced call to getincom by new namelist. Moved procedure conf_interface into module interface_surf. Added variables sig1 and w01 to startphy.nc and restartphy.nc, for procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and w01 in concvl and physiq. Deleted unused arguments of clmain, clqh and intersurf_hq, among which (y)?sollwdown. Following LMDZ, in physiq, read sollw instead of sollwdown from startphy.nc, write sollw instead of sollwdown to restartphy.nc. In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade and ok_aie are false. (Following LMDZ.) Added dimension klev to startphy.nc and restartphy.nc, and deleted dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and rnebcon for vertical levels >=2. Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)
Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and rad_chau2 from module nuagecom to module conf_phys_m. Read clesphys2_nml from conf_phys instead of gcm. Removed argument iflag_con from several procedures. Access module variable instead.
Changed handling of compiler in compilation system. Removed the prefix letters "y", "p", "t" or "z" in some names of variables. Replaced calls to NetCDF by calls to NetCDF95. Extracted "ioget_calendar" procedures from "calendar.f90" into a separate file. Extracted to a separate file, "mathop2.f90", procedures that were not part of the generic interface "mathop" in "mathop.f90". Removed computation of "dq" in "bilan_dyn", which was not used. In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not compatible with declarations of array sizes. In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed the size of some arrays from "klon" to "knon". Removed possible call to "conema3" in "physiq". Removed unused argument "cd" in "yamada".
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
LMDZE now uses library Jumble. Removed all calls to "flinget". Replaced calls to "flinget", "flininfo", "flinopen_nozoom" by calls to NetCDF95 and Jumble. Split file "cv_driver.f" into "cv_driver.f90", "cv_flag.f90" and "cv_thermo.f90". Bug fix: "QANCIEN" was read twice in "phyeytat0". In "physiq", initialization of "d_t", "d_u", "d_v" was useless.
Split "thermcell.f" and "cv3_routines.f". Removed copies of files that are now in "L_util". Moved "mva9" and "diagetpq" to their own files. Unified variable names across procedures.
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
Created rule for "compare_sampl_*" files in "Documentation/Manuel_LMDZE.texfol/Graphiques/GNUmakefile". Extracted "qcheck", "radiornpb", "minmaxqfi" into separate files. Read pressure coordinate of ozone coefficients once per run instead of every day. Added some "intent" attributes. Added argument "nq" to "ini_histday". Replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d". "Sigma_O3_Royer" is written to "histday.nc" only if "nq >= 4". Moved "ini_histrac" to module "ini_hist". Compute "zmasse" in "physiq", pass it to "phytrac". Removed computations of "pftsol*" and "ppsrf*" in "phytrac". Do not use variable "rg" from module "YOMCST" in "TLIFT".
-- Minor change of behaviour: "etat0" does not compute "rugsrel" nor "radpas". Deleted arguments "radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of "phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In "physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program "etat0_lim" does not use "clesphys2". -- Minor modification of input/output: Created subroutine "read_clesphys2". Variables of "clesphys2" are read in "read_clesphys2" instead of "conf_gcm". "printflag" does not print variables of "clesphys2". -- Should not change any result at run time: References to module "numer_rec" instead of individual modules of "Numer_rec_Lionel". Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm", "leapfrog", "phyetat0". Deleted variable "clesphy0" in "gcm". "phyetat0" does not modify variables of "clesphys2". The program unit "gcm" does not modify "itau_phy". Added some "intent" attributes. "regr11_lint" does not call "polint".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.21 |