--- trunk/phylmd/phyetat0.f90 2013/11/15 18:45:49 76 +++ trunk/phylmd/phyetat0.f 2014/07/07 17:45:21 101 @@ -10,11 +10,11 @@ contains - SUBROUTINE phyetat0(fichnom, pctsrf, tsol, tsoil, ocean, tslab, seaice, & - qsurf, qsol, snow, albe, alblw, evap, rain_fall, snow_fall, solsw, & - sollw, fder, radsol, frugs, agesno, zmea, zstd, zsig, zgam, zthe, & - zpic, zval, t_ancien, q_ancien, ancien_ok, rnebcon, ratqs, clwcon, & - run_off_lic_0, sig1, w01) + SUBROUTINE phyetat0(pctsrf, tsol, tsoil, tslab, seaice, qsurf, qsol, & + snow, albe, alblw, evap, rain_fall, snow_fall, solsw, sollw, fder, & + radsol, frugs, agesno, zmea, zstd, zsig, zgam, zthe, zpic, zval, & + t_ancien, q_ancien, ancien_ok, rnebcon, ratqs, clwcon, run_off_lic_0, & + sig1, w01) ! From phylmd/phyetat0.F, version 1.4 2005/06/03 10:03:07 ! Author: Z.X. Li (LMD/CNRS) @@ -24,20 +24,18 @@ use dimphy, only: zmasq, klev USE dimsoil, ONLY : nsoilmx USE indicesol, ONLY : epsfra, is_lic, is_oce, is_sic, is_ter, nbsrf - use netcdf, only: nf90_get_att, nf90_global, nf90_inq_varid, NF90_NOERR, & + use netcdf, only: nf90_global, nf90_inq_varid, NF90_NOERR, & NF90_NOWRITE - use netcdf95, only: handle_err, nf95_get_var, nf95_close, NF95_OPEN, & - nf95_inq_varid + use netcdf95, only: nf95_close, nf95_get_att, nf95_get_var, & + nf95_inq_varid, nf95_inquire_variable, NF95_OPEN USE temps, ONLY : itau_phy - CHARACTER(len=*), intent(in):: fichnom REAL pctsrf(klon, nbsrf) REAL tsol(klon, nbsrf) REAL tsoil(klon, nsoilmx, nbsrf) - CHARACTER(len=*), intent(in):: ocean REAL tslab(klon), seaice(klon) REAL qsurf(klon, nbsrf) - REAL qsol(klon) + REAL, intent(out):: qsol(:) ! (klon) REAL snow(klon, nbsrf) REAL albe(klon, nbsrf) REAL alblw(klon, nbsrf) @@ -69,7 +67,7 @@ ! Local: REAL fractint(klon) REAL xmin, xmax - INTEGER ncid, varid + INTEGER ncid, varid, ndims INTEGER ierr, i, nsrf, isoil CHARACTER(len=7) str7 CHARACTER(len=2) str2 @@ -79,11 +77,9 @@ print *, "Call sequence information: phyetat0" ! Fichier contenant l'état initial : - print *, 'fichnom = ', fichnom - call NF95_OPEN(fichnom, NF90_NOWRITE, ncid) + call NF95_OPEN("startphy.nc", NF90_NOWRITE, ncid) - ierr = nf90_get_att(ncid, nf90_global, "itau_phy", itau_phy) - call handle_err("phyetat0 itau_phy", ierr, ncid, nf90_global) + call nf95_get_att(ncid, nf90_global, "itau_phy", itau_phy) ! Lecture des latitudes (coordonnees): @@ -97,13 +93,9 @@ ! Lecture du masque terre mer - ierr = NF90_INQ_VARID(ncid, "masque", varid) - IF (ierr == NF90_NOERR) THEN - call nf95_get_var(ncid, varid, zmasq) - else - PRINT *, 'phyetat0: Le champ est absent' - PRINT *, 'fichier startphy non compatible avec phyetat0' - ENDIF + call NF95_INQ_VARID(ncid, "masque", varid) + call nf95_get_var(ncid, varid, zmasq) + ! Lecture des fractions pour chaque sous-surface ! initialisation des sous-surfaces @@ -166,46 +158,17 @@ END DO ! Lecture des temperatures du sol: - - ierr = NF90_INQ_VARID(ncid, "TS", varid) - IF (ierr /= NF90_NOERR) THEN - PRINT *, 'phyetat0 : Le champ est absent' - PRINT *, ' Mais je vais essayer de lire TS**' - DO nsrf = 1, nbsrf - IF (nsrf > 99) THEN - PRINT *, "Trop de sous-mailles" - stop 1 - ENDIF - WRITE(str2, '(i2.2)') nsrf - call NF95_INQ_VARID(ncid, "TS"//str2, varid) - call NF95_GET_VAR(ncid, varid, tsol(:, nsrf)) - xmin = 1.0E+20 - xmax = -1.0E+20 - DO i = 1, klon - xmin = MIN(tsol(i, nsrf), xmin) - xmax = MAX(tsol(i, nsrf), xmax) - ENDDO - PRINT *, 'Temperature du sol TS**:', nsrf, xmin, xmax - ENDDO - ELSE - PRINT *, 'phyetat0: Le champ est present' - PRINT *, ' J ignore donc les autres temperatures TS**' + call NF95_INQ_VARID(ncid, "TS", varid) + call nf95_inquire_variable(ncid, varid, ndims = ndims) + if (ndims == 2) then + call NF95_GET_VAR(ncid, varid, tsol) + else + print *, "Found only one surface type for soil temperature." call nf95_get_var(ncid, varid, tsol(:, 1)) - xmin = 1.0E+20 - xmax = -1.0E+20 - DO i = 1, klon - xmin = MIN(tsol(i, 1), xmin) - xmax = MAX(tsol(i, 1), xmax) - ENDDO - PRINT *, 'Temperature du sol ', xmin, xmax - DO nsrf = 2, nbsrf - DO i = 1, klon - tsol(i, nsrf) = tsol(i, 1) - ENDDO - ENDDO - ENDIF + tsol(:, 2:nbsrf) = spread(tsol(:, 1), dim = 2, ncopies = nbsrf - 1) + end if - ! Lecture des temperatures du sol profond: + ! Lecture des temperatures du sol profond: DO nsrf = 1, nbsrf DO isoil=1, nsoilmx @@ -228,35 +191,9 @@ ENDDO !IM "slab" ocean - ! Lecture de tslab (pour slab ocean seulement): - - IF (ocean .eq. 'slab ') then - call NF95_INQ_VARID(ncid, "TSLAB", varid) - call nf95_get_var(ncid, varid, tslab) - xmin = 1.0E+20 - xmax = -1.0E+20 - DO i = 1, klon - xmin = MIN(tslab(i), xmin) - xmax = MAX(tslab(i), xmax) - ENDDO - PRINT *, 'Ecart de la SST tslab:', xmin, xmax - - ! Lecture de seaice (pour slab ocean seulement): - - call NF95_INQ_VARID(ncid, "SEAICE", varid) - call nf95_get_var(ncid, varid, seaice) - xmin = 1.0E+20 - xmax = -1.0E+20 - DO i = 1, klon - xmin = MIN(seaice(i), xmin) - xmax = MAX(seaice(i), xmax) - ENDDO - PRINT *, 'Masse de la glace de mer seaice:', xmin, xmax - ELSE - tslab = 0. - seaice = 0. - ENDIF + tslab = 0. + seaice = 0. ! Lecture de l'humidite de l'air juste au dessus du sol: @@ -308,13 +245,6 @@ PRINT *, ' Valeur par defaut nulle' qsol = 0. ENDIF - xmin = 1.0E+20 - xmax = -1.0E+20 - DO i = 1, klon - xmin = MIN(qsol(i), xmin) - xmax = MAX(qsol(i), xmax) - ENDDO - PRINT *, 'Eau dans le sol (mm) ', xmin, xmax ! Lecture de neige au sol: @@ -470,13 +400,6 @@ call NF95_INQ_VARID(ncid, "rain_f", varid) call NF95_GET_VAR(ncid, varid, rain_fall) - xmin = 1.0E+20 - xmax = -1.0E+20 - DO i = 1, klon - xmin = MIN(rain_fall(i), xmin) - xmax = MAX(rain_fall(i), xmax) - ENDDO - PRINT *, 'Precipitation liquide rain_f:', xmin, xmax ! Lecture precipitation solide: