Parent Directory
| 
Revision Log
| Sticky Revision: |
In clmain, u1lay and v1lay do not depend on the subsurface. So output values of zu1 and zv1 are simply u(:, 1) and v(:, 1). Just remove the corresponding computations from clmain and define yu1 and yv1 in physiq.
LMDZE is now in Fortran 2003 (use of allocatable arguments). gradsdef was not used. Change names: [uv]10m to [uv]10m_srf in clmain, y[uv]1 to [uv]1lay. Remove useless complication: zx_alf[12]. Do not modify [uv]1lay after initial definition from [uv]. Add [uv]10m_srf to output. Change names in physiq: [uv]10m to [uv]10m_srf, z[uv]10m to [uv]10m, corresponding to NetCDF output names. Remove unused complication couchelimite and useless variable inirnpb in phytrac.
offline allows to save variables for another run with offline transport, but there is no provision for this other run with offline transport in LMDZE. The procedures read_pstoke and read_pstoke0 in LMDZ are never called. So removed the possibility offline = T.
In clmain, local variable yfder was computed but not used. I think it was useful for coupling only. Variable fder_print of pbl_surface in LMDZ, which is output by LMDZ, corresponds to variable fder of physiq in LMDZ and LMDZE.
clcdrag is no longer used in LMDZ. Replaced by cdrag in LMDZ. In cdrag in LMDZ, zxli is a symbolic constant, false. So removed case zxli true in LMDZE. read_sst is called zero (if no ocean point on the whole planet) time or once per call of physiq. If mod(itap - 1, lmt_pas) == 0 then we have advanced in time of lmt_pas and deja_lu is necessarily false. qsat[sl] and dqsat[sl] were never called. Added output of qsurf in histins, following LMDZ. Last dummy argument dtime of phystokenc is always the same as first dummy argument pdtphys, removed dtime. Removed make rules for nag_xref95, since it does not exist any longer.
run_off_lic downgraded from variable of module interface_surf to local variable of fonte_neige. Code could not work with ok_aie set to true, so removed this possibility. tauae, piz_ae, cg_ae, topswai, solswai were then 0. cldtaupi was the same as cldtaupd. In sw and procedures called by sw, flag_aer did not need to be double precision, changed it to logical. Downgraded re and fl from arguments of newmicro to local variables. Added output of re and fl (following LMDZ).
size(snow) is now knon in interfsurf_hq. Renamed snow to fsnow in clmain, same name as corresponding actual argument. We can then rename ysnow to simply snow in clmain, same name as corresponding dummy argument of clqh. No need to initialize local snow to 0 since it is only used with indices 1:knon and already initialized from fsnow for each type of surface. If there is no point for a given type of surface, fsnow should be reset to 0 for this type. We need to give a valid value to fsnow in this case even if it will be multiplied by pctsrf = 0 in physiq. In physiq, no need for intermediate zxsnow for output. Removed unused arguments tsurf, p1lay, beta, coef1lay, ps, t1lay, q1lay, u1lay, v1lay, petAcoef, peqAcoef, petBcoef, peqBcoef of fonte_neige, with unused computations of zx_qs and zcor. (Same was done in LMDZ.)
fluxlat, not yfluxlat, should be set to 0 at the beginning of clmain. So fluxlat is defined for a given type of surface even if there is no point of this type at the current time step. fluxlat is defined at each time step in physiq, no need for the save attribute.
Removed module conema3_m. Moved variables epmax and iflag_clw of conema3_m to conf_phys_m, where they are defined. Removed unused variable ok_adj_ema of conema3_m. Added variables d_t_ec, dtsw0 and dtlw0 to histins.nc (following LMDZ). Removed case not lessivage in phytrac. (Not used in LMDZ without INCA either.)
Moved variables from module com_io_dyn to module inithist_m, where they are defined. Split grid_atob.f into grille_m.f and dist_sphe.f. Extracted ASCCI art to documentation. In grille_m, use automatic arrays instead of maximum size. In grille_m, instead of printing data for every problematic point, print a single diagnostic message. Removed variables top_height, overlap, lev_histhf, lev_histday, lev_histmth, type_run, ok_isccp, ok_regdyn, lonmin_ins, lonmax_ins, latmin_ins, latmax_ins of module clesphys, not used. Removed variable itap of module histwrite_phy_m, not used. There is a variable itap in module time_phylmdz. Added output of tro3. In physiq, no need to compute wo at every time-step, since we only use it in radlwsw.
The program did not work with cycle_diurne set to false. mu0 in physiq, which is supposed to be a cosine, was set to -999.999. So prmu in swu had a value of the order of 1e3. So zrmum1 in sw2s had a value of the order of 1e3. So zrayl in sw2s had a value of the order of 1e15. So ztray and ptauaz in swclr also had a large value. So zcorae at line 138 in swclr had a large negative value, which resulted in overflow at line 138. This assignment of -999.999 to mu0 dates from somewhere between revisions 348 and 524 of LMDZ. It was corrected in revision 1068 of LMDZ with a call to angle which was present in revision 348. However, procedure angle was removed from LMDZE in revision 22 because it was not used. Hesitated to bring back angle but, finally, just removed the option of having no diurnal cycle.
Module academic was not used. Useful values for iflag_phys were only 0 and 1 so changed type to logical. Definition of fmagic was duplicated in procedures alboc and alboc_cd so moved it up to interfsurf_hq and also moved multiplication by fmagic (following LMDZ).
New philosophy on compiler options. Removed source code for thermcep = f. (Not used in LMDZ either.)
Removed dimension klev of flux_[tquv] and y_flux_[tquv] in clmain. Removed dimension klev of flux_[tquv] in physiq. Removed dimension klev of flux_[tq] in hbtm. Removed dimension klev of flux_[tq] in clqh and computations for layers other than the surface layer. Removed dimension klev of flux_v in clvent and computations for layers other than the surface layer. Values for layers other than the surface layer were not used nor output (not even in LMDZ). Removed argument dnwd0 of concvl. Simply write - mp in physiq (following LMDZ). Removed useless intermediary variables zxflux[tquv] in physiq.
dnwd0 is just - mp. Compute it simply in concvl. da, phi and mp were set to 0 in physiq before the call to concvl. Clearer to set da1, phi1 and mp1 to 0 in cv_driver so they are intent out. qcheck was debugging, printed to standard output and was called several times per time step of physics. zxtsol was a duplicate of ztsol.
Removed calls to diagphy and diagetpq. Those were debugging procedures, which printed to standard output and were called several times per time step of physics.
if_ebil in physiq can be modified by reading physiq_nml so tests on if_ebil should be after reading physiq_nml.
Promoted lmt_pas from local variable of physiq to variable of module conf_gcm_m. Removed variable run_off of module interface_surf. Was not used. Called run_off_ter in LMDZ, but not used nor printed there either. Simplified logic in interfoce_lim. The way it was convoluted with interfsurf_hq and clmain was quite a mess. Extracted reading of SST into a separate procedure: read_sst. We do not need SST and pctsrf_new at the same time: SST is not needed for sea-ice surface. I did not like this programming: going through the procedure repeatedly for different purposes and testing inside whether there was something to do or it was already done. Reading is now only controlled by itap and lmt_pas, instead of debut, jour, jour_lu and deja_lu. Now we do not copy from pct_tmp to pctsrf_new every time step. Simplified processing of pctsrf in clmain and below. It was quite troubling: pctsrf_new was intent out in interfoce_lim but only defined for ocean and sea-ice. Also the idea of having arrays for all surfaces, pcsrf and pctsrf_new, in interfsurf_hq, which is called for a particular surface, was troubling. pctsrf_new for all surfaces was intent out in intefsurf_hq, but not defined for all surfaces at each call. Removed argument pctsrf_new of clmain: was a duplicate of pctsrf on output, and not used in physiq. Replaced pctsrf_new in clmain by pctsrf_new_oce and pctsrf_new_sic, which were the only ones modified.
Changes results.
In cv30_feed, iflag1 is 0 on entry so we can simplify the test for iflag1 = 7. In cv30_feed, for the computation of icb, replaced sequential search (with a useless end of loop on k) by a call to locate. In CV30 routines, replaced len, nloc, nd, na by klon or klev. Philosophy: no more generality than actually necessary. Converted as many variables as possible to named constants in cv30_param_m and downgraded pbcrit, ptcrit, dtovsh, dpbase, dttrig, tau, delta to local objects in procedures. spfac, betad and omtrain are useless and removed. Instead of filling the array sigp with the constant spfac in cv30_undilute2, just made sigp a constant in cv30_unsat. In cv_driver, define as allocatable variables that are only used on the range (ncum, nl).
Removed the possibility to read aerosol fields. This was not operational. It required fields already regridded in the three dimensions. It seems quite weird to me not to have online vertical regridding, since the surface pressure varies. There was the possibility of adding vertical regridding. But development is not in the spirit of LMDZE. Furthermore, the treatment of aerosols that was in LMDZE is completely obsolete in LMDZ. We could try importing the up-to-date treatment of aerosols of LMDZ, but that carries LMDZE quite far: there is the problem of the calendar and the problem of updated radiative transfer required for updated aerosols.
Extracted the call to read_comdissnew out of conf_gcm. Made ok_instan a variable of module clesphys, itau_phy a variable of module phyetat0_m, nid_ins a variable of module ini_histins_m, itap a variable of new module time_phylmdz, so that histwrite_phy can be called from any procedure without the need to cascade those variables into that procedure. Made itau_w a variable of module time_phylmdz so that it is computed only once per time step of physics. Extracted variables of module clesphys which were in namelist conf_phys_nml into their own namelist, clesphys_nml, and created procedure read_clesphys reading clesphys_nml, to avoid side effect. No need for double precision in procedure getso4fromfile. Assume there is a single variable for the whole year in the NetCDF file instead of one variable per month. Created generic procedure histwrite_phy and removed procedure write_histins, following LMDZ. histwrite_phy has only two arguments, can be called from anywhere, and should manage the logic of writing or not writing into various history files with various operations. So the test on ok_instan goes inside histwrite_phy. Test for raz_date in phyetat0 instead of physiq to avoid side effect. Created procedure increment_itap to avoid side effect. Removed unnecessary differences between procedures readsulfate and readsulfate_pi.
Created module cv_thermo_m around procedure cv_thermo. Moved variables from module cvthermo to module cv_thermo_m, where they are defined. In ini_histins and initphysto, using part of rlon and rlat from phyetat0_m is pretending that we do not know about the dynamical grid, while the way we extract zx_lon(:, 1) and zx_lat(1, :) depends on ordering inside rlon and rlat. So we might as well simplify and clarify by using directly rlonv and rlatu. Removed intermediary variables in write_histins and phystokenc.
There was a function gr_phy_write_3d in dyn3d and a function gr_phy_write_2d in module grid_change. Moved them into a new module gr_phy_write_m under a generic interface gr_phy_write. Replaced calls to gr_fi_ecrit by calls to gr_phy_write. Removed arguments len, nloc and nd of cv30_compress. Removed arguments wd and wd1 of cv30_uncompress, wd of cv30_yield, wd of concvl, wd1 of cv_driver. Was just filled with 0. Removed option ok_gust in physiq, never used. In cv30_unsat, cv30_yield and cv_driver, we only need to define b to level nl - 1.
Removed argument ncum of cv30_unsat, arguments nloc, ncum, nd, na of cv30_yield.
Removed variables nlm and nlp of module cv30_param_m. We do not believe much in the benefit of these intermediary variables so we go for clarity. Removed variable noff of module cv30_param_m. Never used anywhere else. Just set the value of nl explicitly in cv30_param. Removed argument nd of cv30_param. Only called with nd = klev. Replaced calls to zilch by array assignments. There was a strange double call to zilch with the same arguments in cv30_mixing. Removed procedure cv_flag. Just set the value of variable cvflag_grav of module cvflag at declaration.
Removed argument snow_con of concvl. Just set snow_con to 0 in physiq instead of in concvl. Removed unused argument cbmf1 of cv_driver. Added computation and output of ptop (following LMDZ).
Replaced integer variable iflag_con of module clesphys2 by logical variable conv_emanuel.
In procedure concvl, renamed arguments snow to snow_con and ktop to itop_con (names of corresponding actual arguments in physiq). Removed useless argument pmflxs. Removed the alternative between iflag_con == 3 or 4, the same computations were done in both cases.
Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos, buffer, regular from module histcom_var to modules where they are defined. Removed procedure ioipslmpp, useless for a sequential program. Added argument datasz_max to histwrite_real (to avoid circular dependency with histwrite). Removed useless variables and computations everywhere. Changed real litteral constants from default kind to double precision in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu. Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of orosetup. Added output of relative humidity.
Added argument itau_phy to ini_histins, phyetat0, phytrac and phyredem0. Removed variable itau_phy of module temps. Avoiding side effect in etat0 and phyetat0. The procedures ini_histins, phyetat0, phytrac and phyredem0 are all called by physiq so there is no cascading variable penalty. In procedure inifilr, made the condition on colat0 weaker to allow for rounding error. Removed arguments flux_o, flux_g and t_slab of clmain, flux_o and flux_g of clqh and interfsurf_hq, tslab and seaice of phyetat0 and phyredem. NetCDF variables TSLAB and SEAICE no longer in restartphy.nc. All these variables were related to the not-implemented slab ocean. seaice and tslab were just set to 0 in phyetat0 and never used nor changed. flux_o and flux_g were computed in clmain but never used in physiq. Removed argument swnet of clqh. Was used only to compute a local variable, swdown, which was not used.
Simplifications in procedure albsno. Since veget(:, 2:) was 0, iterations 2 to nvm of the loop computing alb_neig_grid were useless. Useless initializations of alb_neige in procedure interfsurf_hq: alb_neig is always computed by albsno just before being used. Useless computation of local variable zfra in the land ice case.
Removed argument ierr of abort_gcm. It was always 1 and not used. Just encapsulated pres2lev into a module. Removed test on run_off in procedure calcul_fluxs. Useless. The test is always done just before in interfsurf_hq. Removed named constants rea and repsm in module suphec: never used.
In inifilr_hemisph, colat0 is necessarily >= 1. / rlamda(iim) (see notes) so we simplify the definition of jfilt. No need to keep modfrst values at other latitudes than the current one, and we can have one loop on latitudes instead of two. Just encapsulated transp into a module.
Write variables from phytrac to "histins.nc" instead of "histrac.nc". The idea is to have different output files only if they have different coordinates, and not according to content (following LMDZ).
Subroutine sugwd sets variables of module yoegwd. Better to put it into module yoegwd. Variables of module yoegwd other than NKTOPG, NSTRA can be symbolic constants. sugwd now only sets NKTOPG, NSTRA. Simplified the computation of NKTOPG, NSTRA by making the local variable zpm1r an array instead of a scalar and calling ifirstloc.
Just encapsulated SUBROUTINE vlsplt in a module and cleaned it. In procedure vlx, local variables dxqu and adxqu only need indices iip2:ip1jm. Otherwise, just cleaned vlx. Procedures dynredem0 and dynredem1 no longer have argument fichnom, they just operate on a file named "restart.nc". The programming guideline here is that gcm should not be more complex than it needs by itself, other programs (ce0l etc.) just have to adapt to gcm. So ce0l now creates files "restart.nc" and "restartphy.nc". In order to facilitate decentralizing the writing of "restartphy.nc", created a procedure phyredem0 out of phyredem. phyredem0 creates the NetCDF header of "restartphy.nc" while phyredem writes the NetCDF variables. As the global attribute itau_phy needs to be filled in phyredem0, at the beginnig of the run, we must compute its value instead of just using itap. So we have a dummy argument lmt_pas of phyredem0. Also, the ncid of "startphy.nc" is upgraded from local variable of phyetat0 to dummy argument. phyetat0 no longer closes "startphy.nc". Following the same decentralizing objective, the ncid of "restart.nc" is upgraded from local variable of dynredem0 to module variable of dynredem0_m. "restart.nc" is not closed at the end of dynredem0 nor opened at the beginning of dynredem1. In procedure etat0, instead of creating many vectors of size klon which will be filled with zeroes, just create one array null_array. In procedure phytrac, instead of writing trs(: 1) to a text file, write it to "restartphy.nc" (following LMDZ). This is better because now trs(: 1) is next to its coordinates. We can write to "restartphy.nc" from phytrac directly, and not add trs(: 1) to the long list of variables in physiq, thanks to the decentralizing of "restartphy.nc". In procedure phyetat0, we no longer write to standard output the minimum and maximum values of read arrays. It is ok to check input and abort on invalid values but just printing statistics on input seems too much useless computation and out of place clutter.
Do not write any longer to startphy.nc nor read from restartphy.nc the NetCDF variable ALBLW: it was the same than ALBE. ALBE was for the visible and ALBLW for the near infrared. In physiq, use only variables falbe and albsol, removed falblw and albsollw. See revision 888 of LMDZ. Removed unused arguments pdp of SUBROUTINE lwbv, ptave of SUBROUTINE lwv, kuaer of SUBROUTINE lwvd, nq of SUBROUTINE initphysto.
Removed argument dtphys of physiq. Use it directly from comconst in physiq instead. Donwgraded variables eignfnu, eignfnv of module inifgn_m to dummy arguments of SUBROUTINE inifgn. They were not used elsewhere than in the calling procedure inifilr. Renamed argument dv of inifgn to eignval_v. Made alboc and alboc_cd independent of the size of arguments. Now we can call them only at indices knindex in interfsurf_hq, where we need them. Fixed a bug in alboc_cd: rmu0 was modified, and the corresponding actual argument in interfsurf_hq is an intent(in) argument of interfsurf_hq. Variables of size knon instead of klon in interfsur_lim and interfsurf_hq. Removed argument alb_new of interfsurf_hq because it was the same than alblw. Simplified test on cycle_diurne, following LMDZ. Moved tests on nbapp_rad from physiq to read_clesphys2. No need for separate counter itaprad, we can use itap. Define lmt_pas and radpas from integer input parameters instead of real-type computed values.
In procedure inifilr, only a part of the arrays modfrstu and modfrstv were defined. Split these into 4 arrays that are fully defined and used: modfrst[ns][uv]. Clarified the logic for the computation of jfilt[ns][uv]. Changed the initial value of the search so that the initial values for northern hemisphere and southern hemisphere cannot be the same. Clarified the logic for the computation of modfrst[ns][uv]: removed the cycle and exit instructions.
Removed unused arguments of groupe, cv3_undilute2, cv_undilute2, interfsur_lim, drag_noro, orodrag, gwprofil Chickened out of revision 148: back to double precision in invert_zoom_x (and overloaded rtsafe).
Moved variable nb_files from module histcom_var to module histbeg_totreg_m. Removed unused argument q of writehist. No history file is created in program ce0l so there is no need to call histclo in etat0. In phyredem, access variables rlat and rlon directly from module phyetat0_m instead of having them as arguments. This is clearer for the program gcm. There are bad side effects for the program ce0l: we have to modify the module variables rlat and rlon in procedure etat0, and we need the additional file phyetat0.f to compile ce0l.
Removed unused argument missval in ma_fucoll_r[1-3]1, ma_fufill_r[1-3]1. Split filtreg into two procedures: filtreg_scal and filtreg_v. I did not like the test on the extent of the argument and there was no common code between the two cases: jjm and jjm + 1. Also, it is simpler now to just remove the argument "direct" from filtreg_v instead of allowing it and then stopping the program if it is false. Removed the computation of pkf in reanalyse2nat, was not used. As a consequence of the split of filtreg, had to extract the computation of pkf out of exner_hyb. This is clearer anyway because we want to be able to call exner_hyb with any size in the first two dimensions (as in test_disvert). But at the same time exner_hyb required particular sizes for the computation of pkf. It was awkward. The only computation of pkf is now in leapfrog.
Sources inside, compilation outside.
The information in argument rdayvrai of calfis was redundant with the information in argument time. Furthermore, in the physics part of gcm, we need separately the day number (an integer) and the time of day. So, replaced real argument rdayvrai of calfis containing elapsed time by integer argument dayvrai containing day number. Corresponding change in leapfrog. In procedure physiq, replaced real argument rdayvrai by integer argument dayvrai. In procedures readsulfate and readsulfate_preind, replaced real argument r_day by arguments dayvrai and time. In procedure alboc, replaced real argument rjour by integer argument jour. alboc was always called by interfsurf_hq with actual argument real(jour), and the meaning of the dummy argument in alboc seems to be that it should be an integer. In procedure leapfrog, local variable time could not be > 1. Removed test. In physiq, replaced nint(rdayvrai) by dayvrai. This changes the results since julien now changes at 0 h instead of 12 h. This follows LMDZ, where the argument of ozonecm is days_elapsed+1.
Removed arguments day0, anne0 of procedures initdynav and inithist. Use directly day_ref, annee_ref instead. Moved variables annee_ref, day_ref of module temps to module dynetat0_m. Deleted variables dayref and anneeref of module conf_gcm_m and removed them from namelist conf_gcm_nml. These variables were troubling intermediary on the way to annee_ref and day_ref. Gave as default values to annee_ref and day_ref the default values of dayref and anneeref. Moved the test on raz_date from main unit gcm to procedure dynetat0. Created namelist dynetat0_nml. Read annee_ref and day_ref from standard input in dynetat0 and redefine them from "start.nc" if not raz_date. Rationale: 1 - Choose the best programming from the point of view of program gcm only, forgetting program ce0l. 2 - The normal case is to define annee_ref and day_ref from "start.nc" so put them in module dynetat0_m rather than in conf_gcm_m. 3 - Try to always read the same namelists in the same order regardless of choices in previous namelists. Downsides: 1 -We now need the file "dynetat0.f" for the program ce0l, because dynetat0_m is used by dynredem0. 2 - We need to define annee_ref and day_ref from procedure etat0. Removed useless variable day_end of module temps.
The variable temps of file restart.nc is always 0. So we remove the possibility that it can be something else. So removed argument time_0 of caldyn, dynetat0, leapfrog.
Created procedure read_yomcst. Deleted some intermediary variables in procedure orbit.
In file grilles_gcm.nc, renamed variable phis to orog, deleted variable presnivs. Removed variable bug_ozone from module clesphys. In procedure ozonecm, moved computation of sint and cost out of the loops on horizontal position and vertical level. Inverted the order of the two loops. We can then move all computations from slat to aprim out of the loop on vertical levels. Created variable slat2, following LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12 from radlwsw to ozonecm, following LMDZ. Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq, pmflxr, pmflxs, prfl, psfl of phytrac. In procedure yamada4, for all the arrays, replaced the dimension klon by ngrid. At the end of the procedure, for the computation of kmn,kn, kq and q2, changed the upper limit of the loop index from klon to ngrid. In radlwsw, for the calculation of pozon, removed the factor paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the factor 101325.0/PPSOL(JL), as in LMDZ.
Imported writefield from LMDZ. Close at the end of gcm the files which were created by writefiled (not done in LMDZ). Removed procedures for the output of Grads files. Removed calls to dump2d. In guide, replaced calls to wrgrads by calls to writefield. In vlspltqs, removed redundant programming of saturation pressure. Call foeew from module FCTTRE instead. Bug fix in interpre: size of w exceeding size of correponding actual argument wg in advtrac. In leapfrog, call guide until the end of the run, instead of six hours before the end. Bug fix in readsulfate_preind: type of arguments.
Renamed module cvparam to cv_param. Deleted procedure cv_param. Changed variables of module cv_param into parameters. In procedures cv_driver, cv_uncompress and cv3_uncompress, removed some arguments giving dimensions and used module variables klon and klev instead. In procedures gradiv2, laplacien_gam and laplacien, changed declarations of local variables because klevel is not always klev. Removed code for nudging surface pressure. Removed arguments pim and pjm of tau2alpha. Added assignment of false to variable first. Replaced real argument del of procedures foeew and FOEDE by logical argument.
Removed unused files "interfoce_slab.f" and "gath2cpl.f". Removed unused variables coastalflow and riverflow of module interface_surf. Removed unused arguments cal, radsol, dif_grnd, fluxlat, fluxsens, dflux_s, dflux_l of procedure fonte_neige. Removed unused arguments tslab, seaice of procedure interfsurf_hq and clqh. Removed unused arguments seaice of procedure clmain. In interfsurf_hq, used variable soil_model of module clesphys2 instead of cascading it as an argument from physiq. In phyetat0, stop if masque not found. Variable TS instead of "TS[0-9][0-9]" in "(re)startphy.nc", with additional dimension nbsrf.
Created procedure test_disvert (following LMDZ). Added procedures hybrid and funcd in module disvert_m. Upgraded compute_ab from internal procedure of disvert to module procedure. Added variables y, ya in module disvert_m. Upgraded s from local variable of procedure disvert to module variable. Renamed allowed value of variable vert_sampling in procedure disvert from "read" to "read_hybrid". Added possibility to read pressure values, value "read_pressure". Replaced vertical distribution for value "param" by the distribution "strato_correct" from LMDZ (but kept the value "param"). In case "tropo", replaced 1 by dsigmin (following LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ). Changed computation of bp in procedure compute_ab. Removed debugindex case in clmain. Removed useless argument rlon of procedure clmain. Removed useless variables ytaux, ytauy of procedure clmain. Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure etat0. Removed variable ok_veget:. coupling with the model Orchid is not possible. Removed variable ocean: modeling an ocean slab is not possible. Removed useless variables tmp_rriv and tmp_rcoa from module interface_surf. Moved initialization of variables da, mp, phi in procedure physiq to to inside the test iflag_con >= 3.
Split inter_barxy.f : one procedure per module, one module per file. Grouped the files into a directory. Split orbite.f. Value of raz_date read from the namelist is taken into account (resetting the step counter) even if annee_ref == anneeref and day_ref == dayref. raz_date is no longer modified by gcm main unit. (Following LMDZ.) Removed argument klon of interfsur_lim. Renamed arguments lmt_alb, lmt_rug to alb_new, z0_new (same name as corresponding actual arguments in interfsurf_hq). Removed argument klon of interfsurf_hq. Removed arguments qs and d_qs of diagetpq. Were always zero. Downgraded arguments d_qw, d_ql of diagetpq to local variables, they were not used in physiq. Removed all computations for solid water in diagetpq, was just zero. Downgraded arguments fs_bound, fq_bound of diagphy to local variables, they were not used in physiq. Encapsulated in a test on iprt all computations in diagphy. Removed parameter nbtr of module dimphy. Replaced it everywhere in the program by nqmx - 2. Removed parameter rnpb of procedure physiq. Kept the true case in physiq and phytrac. Could not work with false case anyway. Removed arguments klon, llm, airephy of qcheck. Removed argument ftsol of initrrnpb, was not used.
Module pressure_var is now only used in gcm. Created local variables pls and p3d in etat0, added argument p3d to regr_pr_o3. In leapfrog, moved computation of p3d and exner function immediately after integrd, for clarity (does not change the execution). Removed unused arguments: ntra, tra1 and tra of cv3_compress; ntra, tra and traent of cv3_mixing; ntra, ftra, ftra1 of cv3_uncompress; ntra, tra, trap of cv3_unsat; ntra, tra, trap, traent, ftra of cv3_yield; tra, tvp, pbase, bbase, dtvpdt1, dtvpdq1, dplcldt, dplcldr, ntra of concvl; ndp1, ntra, tra1 of cv_driver Removed argument d_tra and computation of d_tra in concvl. Removed argument ftra1 and computation of ftra1 in cv_driver. ftra1 was just set to 0 in cv_driver, associated to d_tra in concvl, and set again to zero in concvl.
Extracted procedures that were in module calendar into separate files.
Removed unused variables lock_startdate and time_stamp of module calendar. Noticed that physiq does not change the surface pressure. So removed arguments ps and dpfi of subroutine addfi. dpfi was always 0. The computation of ps in addfi included some averaging at the poles. In principle, this does not change ps but in practice it does because of finite numerical precision. So the results of the simulation are changed. Removed arguments ps and dpfi of calfis. Removed argument d_ps of physiq. du at the poles is not computed by dudv1, so declare only the corresponding latitudes in dudv1. caldyn passes only a section of the array dudyn as argument. Removed variable niadv of module iniadvtrac_m. Declared arguments of exner_hyb as assumed-shape arrays and made all other horizontal sizes in exner_hyb dynamic. This allows the external program test_disvert to use exner_hyb at a single horizontal position.
Removed procedures ini_histday, ini_histhf, write_histday and write_histhf. Divided file regr_pr_coefoz.f into regr_pr_av.f and regr_pr_int.f. (Following LMDZ.) Divided module regr_pr_coefoz into modules regr_pr_av_m and regr_pr_int_m. Renamed regr_pr_av_coefoz to regr_pr_av and regr_pr_int_coefoz to regr_pr_int. The idea is that those procedures are more general than Mobidic. Removed argument dudyn of calfis and physiq. dudyn is not used either in LMDZ. Removed computation in calfis of unused variable zpsrf (not used either in LMDZ). Removed useless computation of dqfi in calfis (part 62): the results were overwritten. (Same in LMDZ.)
Changed all ".f90" suffixes to ".f".
Moved procedure iniconst inside module comconst. Removed useless variables of module comconst: im, jm, lllm, imp1, jmp1, lllmm1, lllmp1, lcl, cotot, unsim. Move definition of dtvr that was in dynetat0 and etat0 to iniconst. Moved comparison of dtvr from day_step and start.nc that was in gcm to dynetat0. Moved call to disvert out of iniconst. Moved call to iniconst in gcm before call to dynetat0. Removed unused argument pvteta of physiq (not used either in LMDZ).
Moved procedure inigeom into module comgeom. In disvert, renamed s_sampling to vert_sampling, following LMDZ. Removed choice strato1. In case read, read ap and bp instead of s (following LMDZ). Added argument phis to start_init_orog and start_init_dyn, and removed variable phis of module start_init_orog_m. In etat0 and start_init_orog, renamed relief to zmea_2d. In start_init_dyn, renamed psol to ps. In start_init_orog, renamed relief_hi to relief. No need to set phis(iim + 1, :) = phis(1, :), already done in grid_noro. Documentation for massbar out of SVN, in massbar.txt. Documentation was duplicated in massdair, but not relevant in massdair. In conflx, no need to initialize pen_[ud] and pde_[ud]. In flxasc, used intermediary variable fact (following LMDZ). In grid_noro, added local variable zmea0 for zmea not smoothed and computed zphi from zmea instead of zmea0 (following LMDZ). This changes the results of ce0l. Removed arguments pen_u and pde_d of phytrac and nflxtr, which were not used.
Moved everything out of libf.
Renamed tpot to teta and psol to ps in etat0. Replaced calls to flincom by calls to NetCDF95 in startdyn. lon_ini, lat_ini and levdyn_ini are now pointers.
NaN to signalling NaN in gfortran_debug.mk. Removed unused procedures in getincom and getincom2. In procedure conf_interface, replaced call to getincom by new namelist. Moved procedure conf_interface into module interface_surf. Added variables sig1 and w01 to startphy.nc and restartphy.nc, for procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and w01 in concvl and physiq. Deleted unused arguments of clmain, clqh and intersurf_hq, among which (y)?sollwdown. Following LMDZ, in physiq, read sollw instead of sollwdown from startphy.nc, write sollw instead of sollwdown to restartphy.nc. In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade and ok_aie are false. (Following LMDZ.) Added dimension klev to startphy.nc and restartphy.nc, and deleted dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and rnebcon for vertical levels >=2. Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)
No reason to call inidissip in ce0l. In inidissip, set random seed to 1 beacuse PGI compiler does not accept all zeros. dq was computed needlessly in caladvtrac. Arguments masse and dq of calfis not used. Replaced real*8 by double precision. Pass arrays with inverted order of vertical levels to conflx instead of creating local variables for this inside conflx.
In procedure, "addfi" access directly the module variable "dtphys" instead of going through an argument. In "conflx", do not create a local variable for temperature with reversed order of vertical levels. Instead, give an actual argument with reversed order in "physiq". Changed names of variables "rmd" and "rmv" from module "suphec_m" to "md" and "mv". In "hgardfou", print only the first temperature out of range found.
Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and rad_chau2 from module nuagecom to module conf_phys_m. Read clesphys2_nml from conf_phys instead of gcm. Removed argument iflag_con from several procedures. Access module variable instead.
Split "flincom.f90" into "flinclo.f90", "flinfindcood.f90",
"flininfo.f90" and "flinopen_nozoom.f90", in directory
"IOIPSL/Flincom".
Renamed "etat0_lim" to "ce0l", as in LMDZ.
Split "readsulfate.f" into "readsulfate.f90", "readsulfate_preind.f90"
and "getso4fromfile.f90".
In etat0, renamed variable q3d to q, as in "dynredem1". Replaced calls
to Flicom procedures by calls to NetCDF95.
In leapfrog, added call to writehist.
Extracted ASCII art from "grid_noro" into a file
"grid_noro.txt". Transformed explicit-shape local arrays into
automatic arrays, so that test on values of iim and jjm is no longer
needed. Test on weight:
IF (weight(ii, jj) /= 0.) THEN
is useless. There is already a test before:
if (any(weight == 0.)) stop "zero weight in grid_noro"
In "aeropt", replaced duplicated lines with different values of inu by
a loop on inu.
Removed arguments of "conf_phys". Corresponding variables are now
defined in "physiq", in a namelist. In "conf_phys", read a namelist
instead of using getin.
Changed handling of compiler in compilation system. Removed the prefix letters "y", "p", "t" or "z" in some names of variables. Replaced calls to NetCDF by calls to NetCDF95. Extracted "ioget_calendar" procedures from "calendar.f90" into a separate file. Extracted to a separate file, "mathop2.f90", procedures that were not part of the generic interface "mathop" in "mathop.f90". Removed computation of "dq" in "bilan_dyn", which was not used. In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not compatible with declarations of array sizes. In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed the size of some arrays from "klon" to "knon". Removed possible call to "conema3" in "physiq". Removed unused argument "cd" in "yamada".
No more included file in LMDZE, not even "netcdf.inc". Created a variable containing the list of common source files in GNUmakefile. So we now also see clearly files that are specific to each program. Split module "histcom". Assembled resulting files in directory "Histcom". Removed aliasing in calls to "laplacien".
Write used namelists to file "" instead of standard output. Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate dimension to arrays so they have rank 3, like the dummy arguments in "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Extract the initialization part from "bilan_dyn" and make a separate procedure, "init_dynzon", from it. Move variables from modules "iniprint" and "logic" to module "conf_gcm_m". Promote internal procedures of "fxy" to private procedures of module "fxy_m". Extracted documentation from "inigeom". Removed useless "save" attributes. Removed useless intermediate variables. Extracted processing of poles from loop on latitudes. Write coordinates to file "longitude_latitude.txt" instead of standard output. Do not use ozone tracer for radiative transfer.
Imported "writehist.f" from LMDZ. Moved module variable "histaveid" from "com_io_dyn" to "initdynav_m". In "inithist", access directly module variables from "com_io_dyn" instead of going through the arguments. Copying from LMDZ, write "u" and scalar variables to separate files. Create a new variable for the new file in "com_io_dyn". Copying from LMDZ, change the vertical axes of the three files. Removed some useless initializations in "dissip". In "bilan_dyn", removed useless variable "time". Avoiding the approximate test on "dt_cum" being a multiple of "dt_app", just compute "ncum" from known usage of "bilan_dyn" and compute "dt_cum" from "ncum". Change "periodav" from real to integer in "conf_gcm_m". Since "day_step" is required to be a multiple of "iperiod", so is "ncum".
Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1" in "inidissip" by calls to intrinsic procedures. Split file "interface_surf.f90" into a file with a module containing only variables, "interface_surf", and single-procedure files. Gathered files into directory "Interface_surf". Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to "divgrad2" and "divgrad", and "crot" to "nxgraro2" and "nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot" from module "inidissip_m", so it can pass them to "gradiv2", etc. Thanks to this modification, we avoid a circular dependency betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by "gradiv2", for instance, during computation of eigenvalues is not the value "cdivu" computed by "inidissip". Extracted procedure "start_inter_3d" from module "startdyn", to its own module. In "inidissip", unrolled loop on "ii". I find it clearer now. Moved variables "matriceun", "matriceus", "matricevn", "matricevs", "matrinvn" and "matrinvs" from module "parafilt" to module "inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu", "jfiltsv" from module "coefils" to module "inifilr_m".
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
Split "getincom.f90" into "getincom.f90" and "getincom2.f90". Split "nuage.f" into "nuage.f90", "diagcld1.f90" and "diagcld2.f90". Created module "chem" from included file "chem.h". Moved "YOEGWD.f90" to directory "Orography". In "physiq", for evaporation of water, "zlsdcp" was equal to "zlvdc". Removed useless variables.
LMDZE now uses library Jumble. Removed all calls to "flinget". Replaced calls to "flinget", "flininfo", "flinopen_nozoom" by calls to NetCDF95 and Jumble. Split file "cv_driver.f" into "cv_driver.f90", "cv_flag.f90" and "cv_thermo.f90". Bug fix: "QANCIEN" was read twice in "phyeytat0". In "physiq", initialization of "d_t", "d_u", "d_v" was useless.
Split "thermcell.f" and "cv3_routines.f". Removed copies of files that are now in "L_util". Moved "mva9" and "diagetpq" to their own files. Unified variable names across procedures.
"alpha" useless, always 0, in "exner_hyb".
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
Created intermediary variable for meridional wind in "calfis". Removed unused variables. Removed argument "firstcal" of "physiq", made it a local variable. Removed unused argument "v" of "phytrac".
Split "ini_hist.f90" into single-procedure files. In "calfis" and "physiq", removed dummy argument "nq" since "nq" must be equal to "nqmx". In "calfis", renamed dummy argument "pq" to "q", same name as actual argument in "leapfrog". Renamed local variable "zqfi" to "qx", same name as dummy argument in "physiq". Removed arguments "itop_con" and "ibas_con" of "phytrac", which were not used.
Split "stringop.f90" into single-procedure files. Gathered files in directory "IOIPSL/Stringop". Split "flincom.f90" into "flincom.f90" and "flinget.f90". Removed unused procedures from module "flincom". Removed unused argument "filename" of procedure "flinopen_nozoom". Removed unused files. Split "grid_change.f90" into "grid_change.f90" and "gr_phy_write_3d.f90". Removed unused procedures from modules "calendar", "ioipslmpp", "grid_atob", "gath_cpl" and "getincom". Removed unused procedures in files "ppm3d.f" and "thermcell.f". Split "mathelp.f90" into "mathelp.f90" and "mathop.f90". Removed unused variable "dpres" of module "comvert". Use argument "itau" instead of local variables "iadvtr" and "first" to control algorithm in procedure "fluxstokenc". Removed unused arguments of procedure "integrd". Removed useless computations at the end of procedure "leapfrog". Merged common block "matrfil" into module "parafilt".
Split "vlsplt.f" in single-procedure files. Gathered the files in directory "dyn3d/Vlsplt". Defined "pbarum(:, 1, :)" and "pbarum(:, jjm + 1, :)" in procedure "groupe".
Imported Source files of the external library "IOIPSL_Lionel" into "libf/IOIPSL". Split "cray.f90" into "scopy.f90" and "ssum.f90". Rewrote "leapfrog" in order to have a clearer algorithmic structure.
Split "orografi.f": one file for each procedure. Put the created files in new directory "Orography". Removed argument "vcov" of procedure "sortvarc". Removed arguments "itau" and "time" of procedure "caldyn0". Removed arguments "itau", "time" and "vcov" of procedure "sortvarc0". Removed argument "time" of procedure "dynredem1". Removed NetCDF variable "temps" in files "start.nc" and "restart.nc", because its value is always 0. Removed argument "nq" of procedures "iniadvtrac" and "leapfrog". The number of "tracers read in "traceur.def" must now be equal to "nqmx", or "nqmx" must equal 4 if there is no file "traceur.def". Replaced variable "nq" by constant "nqmx" in "leapfrog". NetCDF variable for ozone field in "coefoz.nc" must now be called "tro3" instead of "r". Fixed bug in "zenang".
Superficial modifications
Deleted argument "presnivs" of "physiq", "ini_histhf", "ini_histhf3d", "ini_histday", "ini_histins", "ini_histrac", "phytrac". Access it from "comvert" instead. Replaced calls to NetCDF Fortran 77 interface by calls to Fortran 90 interface or to NetCDF95. Procedure "gr_phy_write_3d" now works with a variable of arbitrary size in the second dimension. Annotated use statements with "only" clause. Replaced calls to NetCDF interface version 2 by calls to Fortran 90 interface in "guide.f90" and "read_reanalyse.f". In "write_histrac", replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d" and "gr_phy_write_3d".
In module "regr_pr", rewrote scanning of horizontal positions as a single set of loops, using a mask. Added some "intent" attributes. In "dynredem0", replaced calls to Fortran 77 interface of NetCDF by calls to NetCDF95. Removed calls to "nf_redef", regrouped all writing operations. In "dynredem1", replaced some calls to Fortran 77 interface of NetCDF by calls to Fortran 90 interface. Renamed variable "nqmax" to "nq_phys". In "physiq", if "nq >= 5" then "wo" is computed from the parameterization of "Cariolle".
Created rule for "compare_sampl_*" files in "Documentation/Manuel_LMDZE.texfol/Graphiques/GNUmakefile". Extracted "qcheck", "radiornpb", "minmaxqfi" into separate files. Read pressure coordinate of ozone coefficients once per run instead of every day. Added some "intent" attributes. Added argument "nq" to "ini_histday". Replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d". "Sigma_O3_Royer" is written to "histday.nc" only if "nq >= 4". Moved "ini_histrac" to module "ini_hist". Compute "zmasse" in "physiq", pass it to "phytrac". Removed computations of "pftsol*" and "ppsrf*" in "phytrac". Do not use variable "rg" from module "YOMCST" in "TLIFT".
-- Minor modification of input/output: Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1", "ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4" "mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from "histrac.nc". Variable "raz_date" of module "conf_gcm_m" has logical type instead of integer type. -- Should not change any result at run time: Modified calls to "IOIPSL_Lionel" procedures because the interfaces of these procedures have been simplified. Changed name of variable in module "start_init_orog_m": "masque" to "mask". Created a module containing procedure "phyredem". Removed arguments "punjours", "pdayref" and "ptimestep" of procedure "iniphysiq". Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created procedure "gr_phy_write_3d". Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev", "calcul_divers".
-- Minor change of behaviour: "etat0" does not compute "rugsrel" nor "radpas". Deleted arguments "radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of "phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In "physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program "etat0_lim" does not use "clesphys2". -- Minor modification of input/output: Created subroutine "read_clesphys2". Variables of "clesphys2" are read in "read_clesphys2" instead of "conf_gcm". "printflag" does not print variables of "clesphys2". -- Should not change any result at run time: References to module "numer_rec" instead of individual modules of "Numer_rec_Lionel". Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm", "leapfrog", "phyetat0". Deleted variable "clesphy0" in "gcm". "phyetat0" does not modify variables of "clesphys2". The program unit "gcm" does not modify "itau_phy". Added some "intent" attributes. "regr11_lint" does not call "polint".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
This revision is not in working order. Pending some moving of files. Important changes. In the program "etat0_lim": ozone coefficients from Mobidic are regridded in time instead of pressure ; consequences in "etat0". In the program "gcm", ozone coefficients from Mobidic are read once per day only for the current day and regridded in pressure ; consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and "regr_pr_comb_coefoz_m". NetCDF95 is a library and does not export NetCDF. New variables "nag_gl_options", "nag_fcalls_options" and "nag_cross_options" in "nag_tools.mk". "check_coefoz.jnl" rewritten entirely for new version of "coefoz_LMDZ.nc". Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk". Added some "intent" attributes in "calfis", "clmain", "clqh", "cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD", "nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind" and "undefSTD". In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of 1. "phis" has assumed shape in "dynredem0". Added module containing "dynredem0". Changed some calls with NetCDF Fortran 77 interface to calls with NetCDF95 interface. Replaced calls to "ssum" by calls to "sum" in "inigeom". In "make.sh", new option "-c" to change compiler. In "aaam_bud", argument "rjour" deleted. In "physiq": renamed some variables; deleted variable "xjour". In "phytrac": renamed some variables; new argument "lmt_pas".
Removed test on coefoz_LMDZ in gcm.sh. Added test on nbtr in ini_histhf3d and write_histhf3d. Added test on nqmax in phytrac.
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |