Parent Directory
| 
Revision Log
| Sticky Revision: |
Sources inside, compilation outside.
The information in argument rdayvrai of calfis was redundant with the information in argument time. Furthermore, in the physics part of gcm, we need separately the day number (an integer) and the time of day. So, replaced real argument rdayvrai of calfis containing elapsed time by integer argument dayvrai containing day number. Corresponding change in leapfrog. In procedure physiq, replaced real argument rdayvrai by integer argument dayvrai. In procedures readsulfate and readsulfate_preind, replaced real argument r_day by arguments dayvrai and time. In procedure alboc, replaced real argument rjour by integer argument jour. alboc was always called by interfsurf_hq with actual argument real(jour), and the meaning of the dummy argument in alboc seems to be that it should be an integer. In procedure leapfrog, local variable time could not be > 1. Removed test. In physiq, replaced nint(rdayvrai) by dayvrai. This changes the results since julien now changes at 0 h instead of 12 h. This follows LMDZ, where the argument of ozonecm is days_elapsed+1.
Removed arguments day0, anne0 of procedures initdynav and inithist. Use directly day_ref, annee_ref instead. Moved variables annee_ref, day_ref of module temps to module dynetat0_m. Deleted variables dayref and anneeref of module conf_gcm_m and removed them from namelist conf_gcm_nml. These variables were troubling intermediary on the way to annee_ref and day_ref. Gave as default values to annee_ref and day_ref the default values of dayref and anneeref. Moved the test on raz_date from main unit gcm to procedure dynetat0. Created namelist dynetat0_nml. Read annee_ref and day_ref from standard input in dynetat0 and redefine them from "start.nc" if not raz_date. Rationale: 1 - Choose the best programming from the point of view of program gcm only, forgetting program ce0l. 2 - The normal case is to define annee_ref and day_ref from "start.nc" so put them in module dynetat0_m rather than in conf_gcm_m. 3 - Try to always read the same namelists in the same order regardless of choices in previous namelists. Downsides: 1 -We now need the file "dynetat0.f" for the program ce0l, because dynetat0_m is used by dynredem0. 2 - We need to define annee_ref and day_ref from procedure etat0. Removed useless variable day_end of module temps.
Removed intermediate variables in calcul_fluxs.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and rad_chau2 from module nuagecom to module conf_phys_m. Read clesphys2_nml from conf_phys instead of gcm. Removed argument iflag_con from several procedures. Access module variable instead.
Split "flincom.f90" into "flinclo.f90", "flinfindcood.f90",
"flininfo.f90" and "flinopen_nozoom.f90", in directory
"IOIPSL/Flincom".
Renamed "etat0_lim" to "ce0l", as in LMDZ.
Split "readsulfate.f" into "readsulfate.f90", "readsulfate_preind.f90"
and "getso4fromfile.f90".
In etat0, renamed variable q3d to q, as in "dynredem1". Replaced calls
to Flicom procedures by calls to NetCDF95.
In leapfrog, added call to writehist.
Extracted ASCII art from "grid_noro" into a file
"grid_noro.txt". Transformed explicit-shape local arrays into
automatic arrays, so that test on values of iim and jjm is no longer
needed. Test on weight:
IF (weight(ii, jj) /= 0.) THEN
is useless. There is already a test before:
if (any(weight == 0.)) stop "zero weight in grid_noro"
In "aeropt", replaced duplicated lines with different values of inu by
a loop on inu.
Removed arguments of "conf_phys". Corresponding variables are now
defined in "physiq", in a namelist. In "conf_phys", read a namelist
instead of using getin.
No more included file in LMDZE, not even "netcdf.inc". Created a variable containing the list of common source files in GNUmakefile. So we now also see clearly files that are specific to each program. Split module "histcom". Assembled resulting files in directory "Histcom". Removed aliasing in calls to "laplacien".
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
Split "getincom.f90" into "getincom.f90" and "getincom2.f90". Split "nuage.f" into "nuage.f90", "diagcld1.f90" and "diagcld2.f90". Created module "chem" from included file "chem.h". Moved "YOEGWD.f90" to directory "Orography". In "physiq", for evaporation of water, "zlsdcp" was equal to "zlvdc". Removed useless variables.
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
This revision is not in working order. Pending some moving of files. Important changes. In the program "etat0_lim": ozone coefficients from Mobidic are regridded in time instead of pressure ; consequences in "etat0". In the program "gcm", ozone coefficients from Mobidic are read once per day only for the current day and regridded in pressure ; consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and "regr_pr_comb_coefoz_m". NetCDF95 is a library and does not export NetCDF. New variables "nag_gl_options", "nag_fcalls_options" and "nag_cross_options" in "nag_tools.mk". "check_coefoz.jnl" rewritten entirely for new version of "coefoz_LMDZ.nc". Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk". Added some "intent" attributes in "calfis", "clmain", "clqh", "cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD", "nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind" and "undefSTD". In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of 1. "phis" has assumed shape in "dynredem0". Added module containing "dynredem0". Changed some calls with NetCDF Fortran 77 interface to calls with NetCDF95 interface. Replaced calls to "ssum" by calls to "sum" in "inigeom". In "make.sh", new option "-c" to change compiler. In "aaam_bud", argument "rjour" deleted. In "physiq": renamed some variables; deleted variable "xjour". In "phytrac": renamed some variables; new argument "lmt_pas".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |