Parent Directory | Revision Log
Sticky Revision: |
Rename phisinit to phis in restart.nc: clearer, same name as Fortran variable. In aaam_bud, use rlat and rlon from phyetat0_m instead of having these module variables associated to actual arguments in physiq. In clmain, too many wind variables make the procedure hard to understand. Use yu(:knon, 1) and yv(:knon, 1) instead of u1lay(:knon) and v1lay(:knon). Note that when yu(:knon, 1) and yv(:knon, 1) are used as actual arguments, they are probably copied to new arrays since the elements are not contiguous. Rename yu10m to wind10m because this is the norm of wind vector, not its zonal component. Rename yustar to ustar. Rename uzon and vmer to u1 and v1 since these are wind components at first layer and u1 and v1 are the names of corresponding dummy arguments in stdlevvar. In clmain, rename yzlev to zlev. In clmain, screenc, stdlevvar and coefcdrag, remove the code corresponding to zxli true (not used in LMDZ either). Subroutine ustarhb becomes a function. Simplifications using the fact that zx_alf2 = 0 and zx_alf1 = 1 (discarding the possibility to change this). In procedure vdif_kcay, remove unused dummy argument plev. Remove useless computations of sss and sssq. In clouds_gno, exp(100.) would overflow in single precision. Set maximum to exp(80.) instead. In physiq, use u(:, 1) and v(:, 1) as arguments to phytrac instead of creating ad hoc variables yu1 and yv1. In stdlevvar, rename dummy argument u_10m to wind10m, following the corresponding modification in clmain. Simplifications using the fact that ok_pred = 0 and ok_corr = 1 (discarding the possibility to change this).
Removed argument ncum of cv30_unsat, arguments nloc, ncum, nd, na of cv30_yield.
Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos, buffer, regular from module histcom_var to modules where they are defined. Removed procedure ioipslmpp, useless for a sequential program. Added argument datasz_max to histwrite_real (to avoid circular dependency with histwrite). Removed useless variables and computations everywhere. Changed real litteral constants from default kind to double precision in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu. Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of orosetup. Added output of relative humidity.
Renamed bibio to misc. In procedure fxhyp, use the fact that xf is an odd function of xtild. In procedure invert_zoom_x, replace linear search in xf by bisection. Also, use result from previous loop iteration as initial guess. Variable "it" cannot be equal to 2 * nmax after search. Unused arguments: hm of cv3_feed; ph, qnk, tv,tvp of cv3_mixing; ppsol of lw; rconst, temp of vdif_kcay; rconst, plev, temp, ustar, l_mix of yamada.
Sources inside, compilation outside.
In file grilles_gcm.nc, renamed variable phis to orog, deleted variable presnivs. Removed variable bug_ozone from module clesphys. In procedure ozonecm, moved computation of sint and cost out of the loops on horizontal position and vertical level. Inverted the order of the two loops. We can then move all computations from slat to aprim out of the loop on vertical levels. Created variable slat2, following LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12 from radlwsw to ozonecm, following LMDZ. Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq, pmflxr, pmflxs, prfl, psfl of phytrac. In procedure yamada4, for all the arrays, replaced the dimension klon by ngrid. At the end of the procedure, for the computation of kmn,kn, kq and q2, changed the upper limit of the loop index from klon to ngrid. In radlwsw, for the calculation of pozon, removed the factor paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the factor 101325.0/PPSOL(JL), as in LMDZ.
Imported writefield from LMDZ. Close at the end of gcm the files which were created by writefiled (not done in LMDZ). Removed procedures for the output of Grads files. Removed calls to dump2d. In guide, replaced calls to wrgrads by calls to writefield. In vlspltqs, removed redundant programming of saturation pressure. Call foeew from module FCTTRE instead. Bug fix in interpre: size of w exceeding size of correponding actual argument wg in advtrac. In leapfrog, call guide until the end of the run, instead of six hours before the end. Bug fix in readsulfate_preind: type of arguments.
Removed intermediate variables in calcul_fluxs.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
Changed handling of compiler in compilation system. Removed the prefix letters "y", "p", "t" or "z" in some names of variables. Replaced calls to NetCDF by calls to NetCDF95. Extracted "ioget_calendar" procedures from "calendar.f90" into a separate file. Extracted to a separate file, "mathop2.f90", procedures that were not part of the generic interface "mathop" in "mathop.f90". Removed computation of "dq" in "bilan_dyn", which was not used. In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not compatible with declarations of array sizes. In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed the size of some arrays from "klon" to "knon". Removed possible call to "conema3" in "physiq". Removed unused argument "cd" in "yamada".
Created rule for "compare_sampl_*" files in "Documentation/Manuel_LMDZE.texfol/Graphiques/GNUmakefile". Extracted "qcheck", "radiornpb", "minmaxqfi" into separate files. Read pressure coordinate of ozone coefficients once per run instead of every day. Added some "intent" attributes. Added argument "nq" to "ini_histday". Replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d". "Sigma_O3_Royer" is written to "histday.nc" only if "nq >= 4". Moved "ini_histrac" to module "ini_hist". Compute "zmasse" in "physiq", pass it to "phytrac". Removed computations of "pftsol*" and "ppsrf*" in "phytrac". Do not use variable "rg" from module "YOMCST" in "TLIFT".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.21 |