[lmdze] Log of /trunk/bibio

Revision 83 - Directory Listing
Modified Thu Mar 6 15:12:00 2014 UTC (10 years, 1 month ago) by guez

In procedure conf_guide, replaced calls to getpar by reading a
namelist. Removed file getparam.f, now unused. So getin of IOIPSL is
now unused too. Removed files getincom.f, getincom2.f, cmpblank.f,
find_sig.f, gensig.f and nocomma.f.

Moved variables lat_min_guide and lat_max_guide from module
tau2alpha_m to module conf_guide_m.

Removed variables nivsig and nivsigs of module disvert_m. Instead, in
initdynav and initfluxsto, directly wrote arithmetic sequence for
verical axis, pending a better vertical axis. Removed variables nivsig
and nivsigs of "(re)?.start.nc".

In procedure exner_hyb, replaced p(:, :, 1) by equivalent ps.

Revision 81 - Directory Listing
Modified Wed Mar 5 14:38:41 2014 UTC (10 years, 1 month ago) by guez

 Converted to free source form files which were still in fixed source
form. The conversion was done using the polish mode of the NAG Fortran
Compiler.

In addition to converting to free source form, the processing of the
files also:

-- indented the code (including comments);

-- set Fortran keywords to uppercase, and set all other identifiers
to lower case;

-- added qualifiers to end statements (for example "end subroutine
conflx", instead of "end");

-- changed the terminating statements of all DO loops so that each
loop ends with an ENDDO statement (instead of a labeled continue).

Revision 70 - Directory Listing
Modified Mon Jun 24 15:39:52 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/libf/bibio

In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.

In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".

Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".

In "hgardfou", print only the first temperature out of range found.

Revision 69 - Directory Listing
Modified Mon Feb 18 16:33:12 2013 UTC (11 years, 2 months ago) by guez
Original Path: trunk/libf/bibio

Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from
module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and
rad_chau2 from module nuagecom to module conf_phys_m.

Read clesphys2_nml from conf_phys instead of gcm.

Removed argument iflag_con from several procedures. Access module
variable instead.

Revision 62 - Directory Listing
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 9 months ago) by guez
Original Path: trunk/libf/bibio

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 61 - Directory Listing
Modified Fri Apr 20 14:58:43 2012 UTC (12 years ago) by guez
Original Path: trunk/libf/bibio

No more included file in LMDZE, not even "netcdf.inc".

Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.

Split module "histcom". Assembled resulting files in directory
"Histcom".

Removed aliasing in calls to "laplacien".

Revision 57 - Directory Listing
Modified Mon Jan 30 12:54:02 2012 UTC (12 years, 2 months ago) by guez
Original Path: trunk/libf/bibio

Write used namelists to file "" instead of standard output.

Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad",
"gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate
dimension to arrays so they have rank 3, like the dummy arguments in
"divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot".

Extract the initialization part from "bilan_dyn" and make a separate
procedure, "init_dynzon", from it.

Move variables from modules "iniprint" and "logic" to module
"conf_gcm_m".

Promote internal procedures of "fxy" to private procedures of module
"fxy_m".

Extracted documentation from "inigeom". Removed useless "save"
attributes. Removed useless intermediate variables. Extracted
processing of poles from loop on latitudes. Write coordinates to file
"longitude_latitude.txt" instead of standard output.

Do not use ozone tracer for radiative transfer.

Revision 56 - Directory Listing
Modified Tue Jan 10 19:02:02 2012 UTC (12 years, 3 months ago) by guez
Original Path: trunk/libf/bibio

Imported "writehist.f" from LMDZ.

Moved module variable "histaveid" from "com_io_dyn" to "initdynav_m".

In "inithist", access directly module variables from "com_io_dyn"
instead of going through the arguments. Copying from LMDZ, write "u"
and scalar variables to separate files. Create a new variable for the
new file in "com_io_dyn". Copying from LMDZ, change the vertical axes
of the three files.

Removed some useless initializations in "dissip".

In "bilan_dyn", removed useless variable "time". Avoiding the
approximate test on "dt_cum" being a multiple of "dt_app", just
compute "ncum" from known usage of "bilan_dyn" and compute "dt_cum"
from "ncum". Change "periodav" from real to integer in
"conf_gcm_m". Since "day_step" is required to be a multiple of
"iperiod", so is "ncum".

Revision 52 - Directory Listing
Modified Fri Sep 23 12:28:01 2011 UTC (12 years, 7 months ago) by guez
Original Path: trunk/libf/bibio

Split "conflx.f" into single-procedure files in directory "Conflx".

Split "cv_routines.f" into single-procedure files in directory
"CV_routines". Made module "cvparam" from included file
"cvparam.h". No included file other than "netcdf.inc" left in LMDZE.

Revision 44 - Directory Listing
Modified Wed Apr 13 12:29:18 2011 UTC (13 years ago) by guez
Original Path: trunk/libf/bibio

Removed argument "pdteta" of "calfis", because it was not used.

Created module "conf_guide_m", containing procedure
"conf_guide". Moved module variables from "guide_m" to "conf_guide_m".

In module "getparam", removed "ini_getparam" and "fin_getparam" from
generic interface "getpar".

Created module variables in "tau2alpha_m" to replace common "comdxdy".

Revision 39 - Directory Listing
Modified Tue Jan 25 15:11:05 2011 UTC (13 years, 3 months ago) by guez
Original Path: trunk/libf/bibio

"pi" comes from "nr_util". Removed subroutine "initialize" in module
"comconst".

Copied the content of "fxy_sin.h" into "fxysinus", instead of getting
it from an "include" line. Removed file "fxy_sin.h".

"ps" has rank 2 in "gcm" and "dynetat0".

Assumed-shape for argument "q" of "integrd".

Revision 30 - Directory Listing
Modified Thu Apr 1 09:07:28 2010 UTC (14 years ago) by guez
Original Path: trunk/libf/bibio

Imported Source files of the external library "IOIPSL_Lionel" into
"libf/IOIPSL".

Split "cray.f90" into "scopy.f90" and "ssum.f90".

Rewrote "leapfrog" in order to have a clearer algorithmic structure.

Revision 28 - Directory Listing
Modified Fri Mar 26 18:33:04 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/libf/bibio

Removed unused "diagedyn.f" and "undefSTD.f".

In "etat0", the variable "dt" of module "temps" was defined from
"landicered.nc", which was meaningless and useless. Replaced "dt" by a
local trash variable.

Removed variable "dt" from module "temps" and created instead a local
variable of "leapfrog" and an argument of "integrd".

Revision 27 - Directory Listing
Modified Thu Mar 25 14:29:07 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/libf/bibio

"dyn3d" and "filtrez" do not contain any included file so make rules
have been updated.

"comdissip.f90" was useless, removed it.

"dynredem0" wrote undefined value in "controle(31)", that was
overwritten by "dynredem1". Now "dynredem0" just writes 0 to
"controle(31)".

Removed arguments of "inidissip". "inidissip" now accesses the
variables by use association.

In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote
undefined value to "controle(31)". Added argument "itau" of
"dynredem1" to correct that.

"itaufin" does not need to be a module variable (of "temps"), made it
a local variable of "leapfrog".

Removed calls to "diagedyn" from "leapfrog".

Revision 18 - Directory Listing
Modified Thu Aug 7 12:29:13 2008 UTC (15 years, 8 months ago) by guez
Original Path: trunk/libf/bibio

In module "regr_pr", rewrote scanning of horizontal positions as a
single set of loops, using a mask.

Added some "intent" attributes.

In "dynredem0", replaced calls to Fortran 77 interface of NetCDF by
calls to NetCDF95. Removed calls to "nf_redef", regrouped all writing
operations. In "dynredem1", replaced some calls to Fortran 77
interface of NetCDF by calls to Fortran 90 interface.

Renamed variable "nqmax" to "nq_phys".

In "physiq", if "nq >= 5" then "wo" is computed from the
parameterization of "Cariolle".

Revision 15 - Directory Listing
Modified Fri Aug 1 15:24:12 2008 UTC (15 years, 8 months ago) by guez
Original Path: trunk/libf/bibio

-- Minor modification of input/output:

Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not
modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1",
"ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4"
"mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from
"histrac.nc".

Variable "raz_date" of module "conf_gcm_m" has logical type instead of
integer type.

-- Should not change any result at run time:

Modified calls to "IOIPSL_Lionel" procedures because the interfaces of
these procedures have been simplified.

Changed name of variable in module "start_init_orog_m": "masque" to
"mask".

Created a module containing procedure "phyredem".

Removed arguments "punjours", "pdayref" and "ptimestep" of procedure
"iniphysiq".

Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created
procedure "gr_phy_write_3d".

Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev",
"calcul_divers".

Revision 13 - Directory Listing
Modified Fri Jul 25 19:59:34 2008 UTC (15 years, 9 months ago) by guez
Original Path: trunk/libf/bibio

-- Minor change of behaviour:

"etat0" does not compute "rugsrel" nor "radpas". Deleted arguments
"radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of
"phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In
"physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program
"etat0_lim" does not use "clesphys2".

-- Minor modification of input/output:

Created subroutine "read_clesphys2". Variables of "clesphys2" are read
in "read_clesphys2" instead of "conf_gcm". "printflag" does not print
variables of "clesphys2".

-- Should not change any result at run time:

References to module "numer_rec" instead of individual modules of
"Numer_rec_Lionel".

Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm",
"leapfrog", "phyetat0". Deleted variable "clesphy0" in
"gcm". "phyetat0" does not modify variables of "clesphys2".

The program unit "gcm" does not modify "itau_phy".

Added some "intent" attributes.

"regr11_lint" does not call "polint".

Revision 12 - Directory Listing
Modified Mon Jul 21 16:05:07 2008 UTC (15 years, 9 months ago) by guez
Original Path: trunk/libf/bibio

-- Minor modification of input/output:

Created procedure "read_logic". Variables of module "logic" are read
by "read_logic" instead of "conf_gcm". Variable "offline" of module
"conf_gcm" is read from namelist instead of "*.def".

Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0",
"tabcntr0" and local variables "radpas", "tab_cntrl" of
"phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any
longer. "phyetat0" now reads global attribute "itau_phy" from
"startphy.nc". "phyredem" does not create variable "controle" in
"startphy.nc" any longer. "phyredem" now writes global attribute
"itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of
"printflag". Removed diagnostic messages written by "printflag" for
comparison of the variable "controle" of "startphy.nc" and the
variables read from "*.def" or namelist input.

-- Removing unwanted functionality:

Removed variable "lunout" from module "iniprint", replaced everywhere
by standard output.

Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and
"physiq". Removed procedure "interfoce_cpl".

-- Should not change anything at run time:

Automated creation of graphs in documentation. More documentation on
input files.

Converted Fortran files to free format: "phyredem.f90", "printflag.f90".

Split module "clesphy" into "clesphys" and "clesphys2".

Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and
"statcl" from module "logic". Added arguments "conser" to "advect",
"leapf" to "integrd". Added local variables "forward", "leapf",
"apphys", "conser", "apdiss" in "leapfrog".

Added intent attributes.

Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh"
of "phytrac", "dt" of "yamada".

Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0",
"length", "tabcntr0" in "physiq". Replaced all references to "dtime"
by references to "pdtphys".

Revision 10 - Directory Listing
Modified Fri Apr 18 14:45:53 2008 UTC (16 years ago) by guez
Original Path: trunk/libf/bibio

Added NetCDF directory "/home/guez/include" in "g95.mk" and
"nag_tools.mk".

Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac",
"calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec",
"calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3",
"conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2",
"drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell".

Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo"
and messages for end of run from "abort_gcm" to "gcm"; replaced call
to "abort_gcm" in "leapfrog" by exit from outer loop.

In "calfis": removed argument "pp" and variable "unskap"; changed
"pksurcp" from scalar to rank 2; use "pressure_var"; rewrote
computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy";
added computation of "pls".

Removed unused variable in "dynredem0".

In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call
to "ssum" by call to "sum"; removed variables "xpn" and "xps";
replaced some loops by array expressions.

In "leapfrog": use "pressure_var"; deleted variables "p", "longcles".

Converted common blocks "YOECUMF", "YOEGWD" to modules.

Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr".

Created module "raddimlw" from include file "raddimlw.h".

Corrected call to "new_unit" in "test_disvert".

	ViewVC Help
Powered by ViewVC 1.1.21