[lmdze] Log of /trunk/dyn3d

Revision 89 - Directory Listing
Modified Tue Mar 11 16:03:19 2014 UTC (10 years, 1 month ago) by guez

Removed call to pvtheta in calfis because the result pvteta is not
used (not used either in LMDZ).

Removed unused argument dv of calfis. (Corresponding argument in LMDZ
is pdvcov and computations from pdvcov are made in calfis but not
used.)

Removed procedures that were not called.

Revision 87 - Directory Listing
Modified Thu Mar 6 18:10:03 2014 UTC (10 years, 1 month ago) by guez

In procedure exner_hyb, removed computation of pks at the poles. In the
program ce0l, start_init_dyn ensures that there is a single value of
ps at each pole. In the program gcm, ps received by exner_hyb always
has a single value at each pole. Hence, so does pks.

This modification changes the results of ce0l and gcm.

Revision 86 - Directory Listing
Modified Thu Mar 6 17:51:03 2014 UTC (10 years, 1 month ago) by guez

In leapfrog, removed computation of ps at the poles. dynetat0 checks
that there is a single value of ps at each pole and ps is only
modified in the program gcm by integrd and addfi. Both integrd and
addfi ensure there is a single value of ps at each pole.

This modification changes the results of gcm.

Revision 85 - Directory Listing
Modified Thu Mar 6 17:35:22 2014 UTC (10 years, 1 month ago) by guez

Removed option to guide surface pressure because it was not
functional: psrea1 was not defined in procedure guide. Removed local
variables psrea1 and psrea2 of procedure guide. ps becomes an
"intent(in)" argument in guide. Removed case guide_p in guide. Removed
variable guide_p of module conf_guide_m. Removed case guide_p and
argument ps in read_reanalyse. Removed case guide_p and argument ps in
reanalyse2nat.

Revision 83 - Directory Listing
Modified Thu Mar 6 15:12:00 2014 UTC (10 years, 1 month ago) by guez

In procedure conf_guide, replaced calls to getpar by reading a
namelist. Removed file getparam.f, now unused. So getin of IOIPSL is
now unused too. Removed files getincom.f, getincom2.f, cmpblank.f,
find_sig.f, gensig.f and nocomma.f.

Moved variables lat_min_guide and lat_max_guide from module
tau2alpha_m to module conf_guide_m.

Removed variables nivsig and nivsigs of module disvert_m. Instead, in
initdynav and initfluxsto, directly wrote arithmetic sequence for
verical axis, pending a better vertical axis. Removed variables nivsig
and nivsigs of "(re)?.start.nc".

In procedure exner_hyb, replaced p(:, :, 1) by equivalent ps.

Revision 81 - Directory Listing
Modified Wed Mar 5 14:38:41 2014 UTC (10 years, 1 month ago) by guez

 Converted to free source form files which were still in fixed source
form. The conversion was done using the polish mode of the NAG Fortran
Compiler.

In addition to converting to free source form, the processing of the
files also:

-- indented the code (including comments);

-- set Fortran keywords to uppercase, and set all other identifiers
to lower case;

-- added qualifiers to end statements (for example "end subroutine
conflx", instead of "end");

-- changed the terminating statements of all DO loops so that each
loop ends with an ENDDO statement (instead of a labeled continue).

Revision 79 - Directory Listing
Modified Fri Feb 28 17:52:47 2014 UTC (10 years, 2 months ago) by guez

Moved procedure iniconst inside module comconst. Removed useless
variables of module comconst: im, jm, lllm, imp1, jmp1, lllmm1,
lllmp1, lcl, cotot, unsim. Move definition of dtvr that was in
dynetat0 and etat0 to iniconst. Moved comparison of dtvr from day_step
and start.nc that was in gcm to dynetat0. Moved call to disvert out of
iniconst. Moved call to iniconst in gcm before call to dynetat0.

Removed unused argument pvteta of physiq (not used either in LMDZ).

Revision 78 - Directory Listing
Modified Wed Feb 5 17:51:07 2014 UTC (10 years, 2 months ago) by guez

Moved procedure inigeom into module comgeom.

In disvert, renamed s_sampling to vert_sampling, following
LMDZ. Removed choice strato1. In case read, read ap and bp instead of
s (following LMDZ).

Added argument phis to start_init_orog and start_init_dyn, and removed
variable phis of module start_init_orog_m. In etat0 and
start_init_orog, renamed relief to zmea_2d. In start_init_dyn, renamed
psol to ps.

In start_init_orog, renamed relief_hi to relief. No need to set
phis(iim + 1, :) = phis(1, :), already done in grid_noro.

Documentation for massbar out of SVN, in massbar.txt. Documentation
was duplicated in massdair, but not relevant in massdair.

In conflx, no need to initialize pen_[ud] and pde_[ud]. In flxasc,
used intermediary variable fact (following LMDZ).

In grid_noro, added local variable zmea0 for zmea not smoothed and
computed zphi from zmea instead of zmea0 (following LMDZ). This
changes the results of ce0l.

Removed arguments pen_u and pde_d of phytrac and nflxtr, which were
not used.

Revision 72 - Directory Listing
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/libf/dyn3d

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

Revision 71 - Directory Listing
Modified Mon Jul 8 18:12:18 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/libf/dyn3d

No reason to call inidissip in ce0l.

In inidissip, set random seed to 1 beacuse PGI compiler does not
accept all zeros.

dq was computed needlessly in caladvtrac. Arguments masse and dq of
calfis not used.

Replaced real*8 by double precision.

Pass arrays with inverted order of vertical levels to conflx instead
of creating local variables for this inside conflx.

Revision 70 - Directory Listing
Modified Mon Jun 24 15:39:52 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/libf/dyn3d

In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.

In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".

Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".

In "hgardfou", print only the first temperature out of range found.

Revision 69 - Directory Listing
Modified Mon Feb 18 16:33:12 2013 UTC (11 years, 2 months ago) by guez
Original Path: trunk/libf/dyn3d

Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from
module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and
rad_chau2 from module nuagecom to module conf_phys_m.

Read clesphys2_nml from conf_phys instead of gcm.

Removed argument iflag_con from several procedures. Access module
variable instead.

Revision 68 - Directory Listing
Modified Wed Nov 14 16:59:30 2012 UTC (11 years, 5 months ago) by guez
Original Path: trunk/libf/dyn3d

Split "flincom.f90" into "flinclo.f90", "flinfindcood.f90",
"flininfo.f90" and "flinopen_nozoom.f90", in directory
"IOIPSL/Flincom".

Renamed "etat0_lim" to "ce0l", as in LMDZ.

Split "readsulfate.f" into "readsulfate.f90", "readsulfate_preind.f90"
and "getso4fromfile.f90".

In etat0, renamed variable q3d to q, as in "dynredem1". Replaced calls
to Flicom procedures by calls to NetCDF95.

In leapfrog, added call to writehist.

Extracted ASCII art from "grid_noro" into a file
"grid_noro.txt". Transformed explicit-shape local arrays into
automatic arrays, so that test on values of iim and jjm is no longer
needed. Test on weight:
          IF (weight(ii, jj) /= 0.) THEN
is useless. There is already a test before:
    if (any(weight == 0.)) stop "zero weight in grid_noro"

In "aeropt", replaced duplicated lines with different values of inu by
a loop on inu.

Removed arguments of "conf_phys". Corresponding variables are now
defined in "physiq", in a namelist. In "conf_phys", read a namelist
instead of using getin.

Revision 65 - Directory Listing
Modified Thu Sep 20 09:57:03 2012 UTC (11 years, 7 months ago) by guez
Original Path: trunk/libf/dyn3d

Removed unused procedure "divgrad".

In procedure "dissip", save memory by using intermediary arrays "gdx"
and "gdy" several times instead of additional array "grx" and "gry".

In procedure "inidissip", write "dtdiss * teta*" instead of "teta*".

In "comvert", change name of s_sampling from "LMD5" to "tropo" and
from "strato2" to "strato".

Revision 64 - Directory Listing
Modified Wed Aug 29 14:47:17 2012 UTC (11 years, 8 months ago) by guez
Original Path: trunk/libf/dyn3d

Removed variable lstardis in module comdissnew and procedures gradiv
and nxgrarot. lstardir had to be true. gradiv and nxgrarot were called
if lstardis was false. Removed argument iter of procedure
filtreg. iter had to be 1. gradiv and nxgrarot called filtreg with
iter == 2.

Moved procedure flxsetup into module yoecumf. Module yoecumf is only
used in program units of directory Conflx, moved it there.

Revision 62 - Directory Listing
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 9 months ago) by guez
Original Path: trunk/libf/dyn3d

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 61 - Directory Listing
Modified Fri Apr 20 14:58:43 2012 UTC (12 years ago) by guez
Original Path: trunk/libf/dyn3d

No more included file in LMDZE, not even "netcdf.inc".

Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.

Split module "histcom". Assembled resulting files in directory
"Histcom".

Removed aliasing in calls to "laplacien".

Revision 57 - Directory Listing
Modified Mon Jan 30 12:54:02 2012 UTC (12 years, 3 months ago) by guez
Original Path: trunk/libf/dyn3d

Write used namelists to file "" instead of standard output.

Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad",
"gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate
dimension to arrays so they have rank 3, like the dummy arguments in
"divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot".

Extract the initialization part from "bilan_dyn" and make a separate
procedure, "init_dynzon", from it.

Move variables from modules "iniprint" and "logic" to module
"conf_gcm_m".

Promote internal procedures of "fxy" to private procedures of module
"fxy_m".

Extracted documentation from "inigeom". Removed useless "save"
attributes. Removed useless intermediate variables. Extracted
processing of poles from loop on latitudes. Write coordinates to file
"longitude_latitude.txt" instead of standard output.

Do not use ozone tracer for radiative transfer.

Revision 56 - Directory Listing
Modified Tue Jan 10 19:02:02 2012 UTC (12 years, 3 months ago) by guez
Original Path: trunk/libf/dyn3d

Imported "writehist.f" from LMDZ.

Moved module variable "histaveid" from "com_io_dyn" to "initdynav_m".

In "inithist", access directly module variables from "com_io_dyn"
instead of going through the arguments. Copying from LMDZ, write "u"
and scalar variables to separate files. Create a new variable for the
new file in "com_io_dyn". Copying from LMDZ, change the vertical axes
of the three files.

Removed some useless initializations in "dissip".

In "bilan_dyn", removed useless variable "time". Avoiding the
approximate test on "dt_cum" being a multiple of "dt_app", just
compute "ncum" from known usage of "bilan_dyn" and compute "dt_cum"
from "ncum". Change "periodav" from real to integer in
"conf_gcm_m". Since "day_step" is required to be a multiple of
"iperiod", so is "ncum".

Revision 55 - Directory Listing
Modified Mon Dec 12 13:25:01 2011 UTC (12 years, 4 months ago) by guez
Original Path: trunk/libf/dyn3d

-- In procedure "bilan_dyn", replaced average of "zvq" by integral of
"zvq", following a comment of Francis Codron :

Le calcul actuel donne des unités peu pratiques : transports de
chaleur en K m / s par exemple. C'est bien pour les sorties à 2
dimensions, latitude et pression, car alors le transport ne dépend pas
de l'espacement des niveaux, mieux pour comparer ou tracer en latitude
et pression. Par contre, quand on somme sur la verticale, on
préfèrerait avoir des transports d'énergie en watts, ou au moins an K
kg / s (à multiplier par "Cp" ou "L"). On doit pouvoir recalculer le
transport intégré à partir des fichiers de sortie, mais c'est embêtant
(calcul de "cv").

-- Gathered files in directory Dissipation.

Revision 54 - Directory Listing
Modified Tue Dec 6 15:07:04 2011 UTC (12 years, 4 months ago) by guez
Original Path: trunk/libf/dyn3d

Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1"
in "inidissip" by calls to intrinsic procedures.

Split file "interface_surf.f90" into a file with a module containing
only variables, "interface_surf", and single-procedure files. Gathered
files into directory "Interface_surf".

Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to
"divgrad2" and "divgrad", and "crot" to "nxgraro2" and
"nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot"
from module "inidissip_m", so it can pass them to "gradiv2",
etc. Thanks to this modification, we avoid a circular dependency
betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by
"gradiv2", for instance, during computation of eigenvalues is not the
value "cdivu" computed by "inidissip".

Extracted procedure "start_inter_3d" from module "startdyn", to its
own module.

In "inidissip", unrolled loop on "ii". I find it clearer now.

Moved variables "matriceun", "matriceus", "matricevn", "matricevs",
"matrinvn" and "matrinvs" from module "parafilt" to module
"inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu",
"jfiltsv" from module "coefils" to module "inifilr_m".

Revision 52 - Directory Listing
Modified Fri Sep 23 12:28:01 2011 UTC (12 years, 7 months ago) by guez
Original Path: trunk/libf/dyn3d

Split "conflx.f" into single-procedure files in directory "Conflx".

Split "cv_routines.f" into single-procedure files in directory
"CV_routines". Made module "cvparam" from included file
"cvparam.h". No included file other than "netcdf.inc" left in LMDZE.

Revision 49 - Directory Listing
Modified Wed Aug 24 11:43:14 2011 UTC (12 years, 8 months ago) by guez
Original Path: trunk/libf/dyn3d

LMDZE now uses library Jumble.

Removed all calls to "flinget". Replaced calls to "flinget",
"flininfo", "flinopen_nozoom" by calls to NetCDF95 and Jumble.

Split file "cv_driver.f" into "cv_driver.f90", "cv_flag.f90" and
"cv_thermo.f90".

Bug fix: "QANCIEN" was read twice in "phyeytat0".

In "physiq", initialization of "d_t", "d_u", "d_v" was useless.

Revision 47 - Directory Listing
Modified Fri Jul 1 15:00:48 2011 UTC (12 years, 10 months ago) by guez
Original Path: trunk/libf/dyn3d

Split "thermcell.f" and "cv3_routines.f".
Removed copies of files that are now in "L_util".
Moved "mva9" and "diagetpq" to their own files.
Unified variable names across procedures.

Revision 44 - Directory Listing
Modified Wed Apr 13 12:29:18 2011 UTC (13 years ago) by guez
Original Path: trunk/libf/dyn3d

Removed argument "pdteta" of "calfis", because it was not used.

Created module "conf_guide_m", containing procedure
"conf_guide". Moved module variables from "guide_m" to "conf_guide_m".

In module "getparam", removed "ini_getparam" and "fin_getparam" from
generic interface "getpar".

Created module variables in "tau2alpha_m" to replace common "comdxdy".

Revision 43 - Directory Listing
Modified Fri Apr 8 12:43:31 2011 UTC (13 years ago) by guez
Original Path: trunk/libf/dyn3d

"start_init_phys" is now called directly by "etat0" instead of through
"start_init_dyn". "qsol_2d" is no longer a variable of module
"start_init_phys_m", it is an argument of
"start_init_phys". "start_init_dyn" now receives "tsol_2d" from
"etat0".

Split file "vlspltqs.f" into "vlspltqs.f90", "vlxqs.f90" and
""vlyqs.f90".

In "start_init_orog", replaced calls to "flin*" by calls to NetCDF95.

Revision 39 - Directory Listing
Modified Tue Jan 25 15:11:05 2011 UTC (13 years, 3 months ago) by guez
Original Path: trunk/libf/dyn3d

"pi" comes from "nr_util". Removed subroutine "initialize" in module
"comconst".

Copied the content of "fxy_sin.h" into "fxysinus", instead of getting
it from an "include" line. Removed file "fxy_sin.h".

"ps" has rank 2 in "gcm" and "dynetat0".

Assumed-shape for argument "q" of "integrd".

Revision 38 - Directory Listing
Modified Thu Jan 6 17:52:19 2011 UTC (13 years, 3 months ago) by guez
Original Path: trunk/libf/dyn3d

Extracted ASCII art from "inigeom" into a separate text file in the
documentation.

"test_disvert" now creates a separate file for layer thicknesses.

Moved variables from module "yomcst" to module "suphec_m" because this
is where those variables are defined. Kept in "yomcst" only parameters
of Earth orbit. Gave the attribute "parameter" to some variables of
module "suphec_m".

Variables of module "yoethf" were defined in procedure "suphec". Moved
these definitions to a new procedure "yoethf" in module "yoethf_m".

Revision 37 - Directory Listing
Modified Tue Dec 21 15:45:48 2010 UTC (13 years, 4 months ago) by guez
Original Path: trunk/libf/dyn3d

Inlined procedure "pression".

Split "guide.f90" into "guide.f90" and "tau2alpha.f90". Split
"read_reanalyse.f" into single-procedure files in directory
"Read_reanalyse".

Useless copy of variables in "iniphysiq". Directly define module
variables in "gcm" and remove procedure "iniphysiq".

Added "pressure-altitude" in "test_disvert".

Revision 35 - Directory Listing
Modified Tue Jun 8 15:37:21 2010 UTC (13 years, 10 months ago) by guez
Original Path: trunk/libf/dyn3d

Created intermediary variable for meridional wind in "calfis". Removed
unused variables.

Removed argument "firstcal" of "physiq", made it a local
variable. Removed unused argument "v" of "phytrac".

Revision 34 - Directory Listing
Modified Wed Jun 2 11:01:12 2010 UTC (13 years, 10 months ago) by guez
Original Path: trunk/libf/dyn3d

Split "ini_hist.f90" into single-procedure files.

In "calfis" and "physiq", removed dummy argument "nq" since "nq" must
be equal to "nqmx".

In "calfis", renamed dummy argument "pq" to "q", same name as actual
argument in "leapfrog". Renamed local variable "zqfi" to "qx", same
name as dummy argument in "physiq".

Removed arguments "itop_con" and "ibas_con" of "phytrac", which were
not used.

Revision 33 - Directory Listing
Modified Fri Apr 9 10:56:14 2010 UTC (14 years ago) by guez
Original Path: trunk/libf/dyn3d

Test namelist input in procedure "conf_gcm" rather than program unit
"gcm".

Compute "time" in procedure "sortvarc" rather than "leapfrog".

Rewrote "leapfrog" with a single loop on "itau" instead of two nested
loops on number of periodic matsuno-leapfrog cycles and leapfrog
iterations.

Revision 32 - Directory Listing
Modified Tue Apr 6 17:52:58 2010 UTC (14 years ago) by guez
Original Path: trunk/libf/dyn3d

Split "stringop.f90" into single-procedure files. Gathered files in directory
"IOIPSL/Stringop".

Split "flincom.f90" into "flincom.f90" and "flinget.f90". Removed
unused procedures from module "flincom". Removed unused argument
"filename" of procedure "flinopen_nozoom".

Removed unused files.

Split "grid_change.f90" into "grid_change.f90" and
"gr_phy_write_3d.f90".

Removed unused procedures from modules "calendar", "ioipslmpp",
"grid_atob", "gath_cpl" and "getincom". Removed unused procedures in
files "ppm3d.f" and "thermcell.f".

Split "mathelp.f90" into "mathelp.f90" and "mathop.f90".

Removed unused variable "dpres" of module "comvert".

Use argument "itau" instead of local variables "iadvtr" and "first" to
control algorithm in procedure "fluxstokenc".

Removed unused arguments of procedure "integrd".

Removed useless computations at the end of procedure "leapfrog".

Merged common block "matrfil" into module "parafilt".

Revision 30 - Directory Listing
Modified Thu Apr 1 09:07:28 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/libf/dyn3d

Imported Source files of the external library "IOIPSL_Lionel" into
"libf/IOIPSL".

Split "cray.f90" into "scopy.f90" and "ssum.f90".

Rewrote "leapfrog" in order to have a clearer algorithmic structure.

Revision 29 - Directory Listing
Modified Tue Mar 30 10:44:42 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/libf/dyn3d

In "leapfrog", transformed some arrays with a single dimension for horizontal
position into arrays with two horizontal dimensions. Simplified the
computation of potential temperature and surface pressure at the
poles.

Revision 28 - Directory Listing
Modified Fri Mar 26 18:33:04 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/libf/dyn3d

Removed unused "diagedyn.f" and "undefSTD.f".

In "etat0", the variable "dt" of module "temps" was defined from
"landicered.nc", which was meaningless and useless. Replaced "dt" by a
local trash variable.

Removed variable "dt" from module "temps" and created instead a local
variable of "leapfrog" and an argument of "integrd".

Revision 27 - Directory Listing
Modified Thu Mar 25 14:29:07 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/libf/dyn3d

"dyn3d" and "filtrez" do not contain any included file so make rules
have been updated.

"comdissip.f90" was useless, removed it.

"dynredem0" wrote undefined value in "controle(31)", that was
overwritten by "dynredem1". Now "dynredem0" just writes 0 to
"controle(31)".

Removed arguments of "inidissip". "inidissip" now accesses the
variables by use association.

In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote
undefined value to "controle(31)". Added argument "itau" of
"dynredem1" to correct that.

"itaufin" does not need to be a module variable (of "temps"), made it
a local variable of "leapfrog".

Removed calls to "diagedyn" from "leapfrog".

Revision 26 - Directory Listing
Modified Tue Mar 9 15:27:15 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/libf/dyn3d

Moved variable "dtdiss" from module "comconst", variable "idissip"
from module "conf_gcm_m" and all variables from module "comdissipn" to
module "inidissip_m". "inidissip" creates file
"inidissip.csv". "idissip" is no longer read from a namelist. Removed
useless computation of "dtdiss" in procedure "iniconst".

Revision 25 - Directory Listing
Modified Fri Mar 5 16:43:45 2010 UTC (14 years, 1 month ago) by guez
Original Path: trunk/libf/dyn3d

Simplified "etat0_lim.sh" and "gcm.sh" because the full versions
depended on personal arrangements for directories and machines.

Translated included files into modules. Encapsulated procedures into modules.

Moved variables from module "comgeom" to local variables of
"inigeom". Deleted some unused variables in "comgeom".

Moved variable "day_ini" from module "temps" to module "dynetat0_m".

Removed useless test on variable "time" and useless "close" statement
in procedure "leapfrog".

Removed useless call to "inigeom" in procedure "limit".

Revision 23 - Directory Listing
Modified Mon Dec 14 15:25:16 2009 UTC (14 years, 4 months ago) by guez
Original Path: trunk/libf/dyn3d

Split "orografi.f": one file for each procedure. Put the created files
in new directory "Orography".

Removed argument "vcov" of procedure "sortvarc". Removed arguments
"itau" and "time" of procedure "caldyn0". Removed arguments "itau",
"time" and "vcov" of procedure "sortvarc0".

Removed argument "time" of procedure "dynredem1". Removed NetCDF
variable "temps" in files "start.nc" and "restart.nc", because its
value is always 0.

Removed argument "nq" of procedures "iniadvtrac" and "leapfrog". The
number of "tracers read in "traceur.def" must now be equal to "nqmx",
or "nqmx" must equal 4 if there is no file "traceur.def". Replaced
variable "nq" by constant "nqmx" in "leapfrog".

NetCDF variable for ozone field in "coefoz.nc" must now be called
"tro3" instead of "r".

Fixed bug in "zenang".

Revision 20 - Directory Listing
Modified Wed Oct 15 16:19:57 2008 UTC (15 years, 6 months ago) by guez
Original Path: trunk/libf/dyn3d

Deleted argument "presnivs" of "physiq", "ini_histhf", "ini_histhf3d",
"ini_histday", "ini_histins", "ini_histrac", "phytrac". Access it from
"comvert" instead.

Replaced calls to NetCDF Fortran 77 interface by calls to Fortran 90
interface or to NetCDF95.

Procedure "gr_phy_write_3d" now works with a variable of arbitrary
size in the second dimension.

Annotated use statements with "only" clause.

Replaced calls to NetCDF interface version 2 by calls to Fortran 90
interface in "guide.f90" and "read_reanalyse.f".

In "write_histrac", replaced calls to "gr_fi_ecrit" by calls to
"gr_phy_write_2d" and "gr_phy_write_3d".

Revision 18 - Directory Listing
Modified Thu Aug 7 12:29:13 2008 UTC (15 years, 8 months ago) by guez
Original Path: trunk/libf/dyn3d

In module "regr_pr", rewrote scanning of horizontal positions as a
single set of loops, using a mask.

Added some "intent" attributes.

In "dynredem0", replaced calls to Fortran 77 interface of NetCDF by
calls to NetCDF95. Removed calls to "nf_redef", regrouped all writing
operations. In "dynredem1", replaced some calls to Fortran 77
interface of NetCDF by calls to Fortran 90 interface.

Renamed variable "nqmax" to "nq_phys".

In "physiq", if "nq >= 5" then "wo" is computed from the
parameterization of "Cariolle".

Revision 15 - Directory Listing
Modified Fri Aug 1 15:24:12 2008 UTC (15 years, 8 months ago) by guez
Original Path: trunk/libf/dyn3d

-- Minor modification of input/output:

Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not
modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1",
"ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4"
"mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from
"histrac.nc".

Variable "raz_date" of module "conf_gcm_m" has logical type instead of
integer type.

-- Should not change any result at run time:

Modified calls to "IOIPSL_Lionel" procedures because the interfaces of
these procedures have been simplified.

Changed name of variable in module "start_init_orog_m": "masque" to
"mask".

Created a module containing procedure "phyredem".

Removed arguments "punjours", "pdayref" and "ptimestep" of procedure
"iniphysiq".

Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created
procedure "gr_phy_write_3d".

Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev",
"calcul_divers".

Revision 13 - Directory Listing
Modified Fri Jul 25 19:59:34 2008 UTC (15 years, 9 months ago) by guez
Original Path: trunk/libf/dyn3d

-- Minor change of behaviour:

"etat0" does not compute "rugsrel" nor "radpas". Deleted arguments
"radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of
"phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In
"physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program
"etat0_lim" does not use "clesphys2".

-- Minor modification of input/output:

Created subroutine "read_clesphys2". Variables of "clesphys2" are read
in "read_clesphys2" instead of "conf_gcm". "printflag" does not print
variables of "clesphys2".

-- Should not change any result at run time:

References to module "numer_rec" instead of individual modules of
"Numer_rec_Lionel".

Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm",
"leapfrog", "phyetat0". Deleted variable "clesphy0" in
"gcm". "phyetat0" does not modify variables of "clesphys2".

The program unit "gcm" does not modify "itau_phy".

Added some "intent" attributes.

"regr11_lint" does not call "polint".

Revision 12 - Directory Listing
Modified Mon Jul 21 16:05:07 2008 UTC (15 years, 9 months ago) by guez
Original Path: trunk/libf/dyn3d

-- Minor modification of input/output:

Created procedure "read_logic". Variables of module "logic" are read
by "read_logic" instead of "conf_gcm". Variable "offline" of module
"conf_gcm" is read from namelist instead of "*.def".

Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0",
"tabcntr0" and local variables "radpas", "tab_cntrl" of
"phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any
longer. "phyetat0" now reads global attribute "itau_phy" from
"startphy.nc". "phyredem" does not create variable "controle" in
"startphy.nc" any longer. "phyredem" now writes global attribute
"itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of
"printflag". Removed diagnostic messages written by "printflag" for
comparison of the variable "controle" of "startphy.nc" and the
variables read from "*.def" or namelist input.

-- Removing unwanted functionality:

Removed variable "lunout" from module "iniprint", replaced everywhere
by standard output.

Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and
"physiq". Removed procedure "interfoce_cpl".

-- Should not change anything at run time:

Automated creation of graphs in documentation. More documentation on
input files.

Converted Fortran files to free format: "phyredem.f90", "printflag.f90".

Split module "clesphy" into "clesphys" and "clesphys2".

Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and
"statcl" from module "logic". Added arguments "conser" to "advect",
"leapf" to "integrd". Added local variables "forward", "leapf",
"apphys", "conser", "apdiss" in "leapfrog".

Added intent attributes.

Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh"
of "phytrac", "dt" of "yamada".

Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0",
"length", "tabcntr0" in "physiq". Replaced all references to "dtime"
by references to "pdtphys".

Revision 10 - Directory Listing
Modified Fri Apr 18 14:45:53 2008 UTC (16 years ago) by guez
Original Path: trunk/libf/dyn3d

Added NetCDF directory "/home/guez/include" in "g95.mk" and
"nag_tools.mk".

Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac",
"calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec",
"calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3",
"conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2",
"drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell".

Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo"
and messages for end of run from "abort_gcm" to "gcm"; replaced call
to "abort_gcm" in "leapfrog" by exit from outer loop.

In "calfis": removed argument "pp" and variable "unskap"; changed
"pksurcp" from scalar to rank 2; use "pressure_var"; rewrote
computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy";
added computation of "pls".

Removed unused variable in "dynredem0".

In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call
to "ssum" by call to "sum"; removed variables "xpn" and "xps";
replaced some loops by array expressions.

In "leapfrog": use "pressure_var"; deleted variables "p", "longcles".

Converted common blocks "YOECUMF", "YOEGWD" to modules.

Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr".

Created module "raddimlw" from include file "raddimlw.h".

Corrected call to "new_unit" in "test_disvert".

Revision 7 - Directory Listing
Modified Mon Mar 31 12:24:17 2008 UTC (16 years, 1 month ago) by guez
Original Path: trunk/libf/dyn3d

This revision is not in working order. Pending some moving of files.

Important changes. In the program "etat0_lim": ozone coefficients from
Mobidic are regridded in time instead of pressure ; consequences in
"etat0". In the program "gcm", ozone coefficients from Mobidic are
read once per day only for the current day and regridded in pressure ;
consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and
"regr_pr_comb_coefoz_m".

NetCDF95 is a library and does not export NetCDF.

New variables "nag_gl_options", "nag_fcalls_options" and
"nag_cross_options" in "nag_tools.mk".

"check_coefoz.jnl" rewritten entirely for new version of
"coefoz_LMDZ.nc".

Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk".

Added some "intent" attributes in "calfis", "clmain", "clqh",
"cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD",
"nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind"
and "undefSTD".

In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of
1. "phis" has assumed shape in "dynredem0".

Added module containing "dynredem0". Changed some calls with NetCDF
Fortran 77 interface to calls with NetCDF95 interface.

Replaced calls to "ssum" by calls to "sum" in "inigeom".

In "make.sh", new option "-c" to change compiler.

In "aaam_bud", argument "rjour" deleted.

In "physiq": renamed some variables; deleted variable "xjour".

In "phytrac": renamed some variables; new argument "lmt_pas".

Revision 5 - Directory Listing
Modified Mon Mar 3 16:32:04 2008 UTC (16 years, 1 month ago) by guez
Original Path: trunk/libf/dyn3d

Created module from included file parafilt.
Converted caldyn0 to free format.
Added a rule to create cross-references with NAG.
Added optional attribute in iniadvtrac.
Suppressed argument nq in dynredem0 and dynredem1, using nqmx instead.
Replaced some NetCDF calls by netcdf95 calls in dynredem0.
Added intent attribute in dynredem0 and dynredem1.
Annotated use statements with only clause, in dynredem1.
Suppressed variable nq and argument of iniadvtrac in etat0.
Added test on nqmx in etat0.

	ViewVC Help
Powered by ViewVC 1.1.21