[lmdze] Log of /trunk/dyn3d/Guide/Read

Revision 109 - Directory Listing
Modified Wed Sep 17 10:08:00 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

Moved a call to writefield from guide to tau2alpha. (dxdys does not
change with itau.) So dxdys does not need to be a module variable any
longer. Other variables of modules tau2alpha_m downgraded to local
variables of tau2alpha, since they were not used elsewhere.

Procedures write_field[13]d and formcoord were never called. Could
then remove int2str.

Inline writefield_gen into writefield.

CreateNewField takes an integer array argument instead of 3 scalar
integers. CreateNewField now creates a number of dimensions adapted to
the rank of the output field, instead of always 4 dimensions.

Changed names of variables of module write_field: fieldid to
ncid, fieldindex to record, fieldvarid to varid.

In writefield_gen, if index == -1, no need to call GetFieldIndex
again, we know that the result is nbfield.

In guide, moved calls to writefield for some variables inside if
first_call: those variables do not change with time. Removed ztau:
computed only to be output, does not seem meaningful. Removed
writefield for aire: does not change with time and is already in
"grilles_gcm.nc".

Revision 108 - Directory Listing
Modified Tue Sep 16 14:00:41 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

Imported writefield from LMDZ. Close at the end of gcm the files which
were created by writefiled (not done in LMDZ).

Removed procedures for the output of Grads files. Removed calls to
dump2d. In guide, replaced calls to wrgrads by calls to writefield.

In vlspltqs, removed redundant programming of saturation
pressure. Call foeew from module FCTTRE instead.

Bug fix in interpre: size of w exceeding size of correponding actual
argument wg in advtrac.

In leapfrog, call guide until the end of the run, instead of six hours
before the end.

Bug fix in readsulfate_preind: type of arguments.

Revision 102 - Directory Listing
Modified Tue Jul 15 13:43:24 2014 UTC (9 years, 9 months ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

Removed unused file "condsurf.f" (only useful for ocean slab).

day_step must be a multiple of 4 * iperiod if ok_guide.

Changed type of variable online of module conf_guide_m from integer to
logical. Value -1 was not useful, equivalent to not ok_guide.

Removed argument masse of procedure guide. masse is kept consistent
with ps throughout the run. masse need only be computed again just
after ps has been modified. In prodecure guide, replaced use of
remanent variable first by test on itau. Replaced test on variable
"test" by test on integer values.

In leapfrog, for the call to guide, replaced test on real values by
test on integer values.

Bug fix in tau2alpha: computation of dxdyv (following LMDZ revision 1040).

In procedure wrgrads, replaced badly chosen argument name "if" by i_f.

Revision 91 - Directory Listing
Modified Wed Mar 26 17:18:58 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

Removed unused variables lock_startdate and time_stamp of module
calendar.

Noticed that physiq does not change the surface pressure. So removed
arguments ps and dpfi of subroutine addfi. dpfi was always 0. The
computation of ps in addfi included some averaging at the poles. In
principle, this does not change ps but in practice it does because of
finite numerical precision. So the results of the simulation are
changed. Removed arguments ps and dpfi of calfis. Removed argument
d_ps of physiq.

du at the poles is not computed by dudv1, so declare only the
corresponding latitudes in dudv1. caldyn passes only a section of the
array dudyn as argument.

Removed variable niadv of module iniadvtrac_m.

Declared arguments of exner_hyb as assumed-shape arrays and made all
other horizontal sizes in exner_hyb dynamic. This allows the external
program test_disvert to use exner_hyb at a single horizontal position.

Revision 88 - Directory Listing
Modified Tue Mar 11 15:09:02 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

Removed useless argument mode of subroutine read_reanalyse.

Revision 85 - Directory Listing
Modified Thu Mar 6 17:35:22 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

Removed option to guide surface pressure because it was not
functional: psrea1 was not defined in procedure guide. Removed local
variables psrea1 and psrea2 of procedure guide. ps becomes an
"intent(in)" argument in guide. Removed case guide_p in guide. Removed
variable guide_p of module conf_guide_m. Removed case guide_p and
argument ps in read_reanalyse. Removed case guide_p and argument ps in
reanalyse2nat.

Revision 83 - Directory Listing
Modified Thu Mar 6 15:12:00 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

In procedure conf_guide, replaced calls to getpar by reading a
namelist. Removed file getparam.f, now unused. So getin of IOIPSL is
now unused too. Removed files getincom.f, getincom2.f, cmpblank.f,
find_sig.f, gensig.f and nocomma.f.

Moved variables lat_min_guide and lat_max_guide from module
tau2alpha_m to module conf_guide_m.

Removed variables nivsig and nivsigs of module disvert_m. Instead, in
initdynav and initfluxsto, directly wrote arithmetic sequence for
verical axis, pending a better vertical axis. Removed variables nivsig
and nivsigs of "(re)?.start.nc".

In procedure exner_hyb, replaced p(:, :, 1) by equivalent ps.

Revision 82 - Directory Listing
Modified Wed Mar 5 14:57:53 2014 UTC (10 years, 2 months ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

Changed all ".f90" suffixes to ".f".

Revision 76 - Directory Listing
Modified Fri Nov 15 18:45:49 2013 UTC (10 years, 5 months ago) by guez
Original Path: trunk/dyn3d/Read_reanalyse

Moved everything out of libf.

Revision 66 - Directory Listing
Modified Thu Sep 20 13:00:41 2012 UTC (11 years, 7 months ago) by guez
Original Path: trunk/libf/dyn3d/Read_reanalyse

Changed name of module "comvert" to "disvert_m". Changed constant
1. to 0.3 in vertical sampling "strato".

Revision 61 - Directory Listing
Modified Fri Apr 20 14:58:43 2012 UTC (12 years ago) by guez
Original Path: trunk/libf/dyn3d/Read_reanalyse

No more included file in LMDZE, not even "netcdf.inc".

Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.

Split module "histcom". Assembled resulting files in directory
"Histcom".

Removed aliasing in calls to "laplacien".

Revision 44 - Directory Listing
Modified Wed Apr 13 12:29:18 2011 UTC (13 years ago) by guez
Original Path: trunk/libf/dyn3d/Read_reanalyse

Removed argument "pdteta" of "calfis", because it was not used.

Created module "conf_guide_m", containing procedure
"conf_guide". Moved module variables from "guide_m" to "conf_guide_m".

In module "getparam", removed "ini_getparam" and "fin_getparam" from
generic interface "getpar".

Created module variables in "tau2alpha_m" to replace common "comdxdy".

Revision 37 - Directory Listing
Added Tue Dec 21 15:45:48 2010 UTC (13 years, 4 months ago) by guez
Original Path: trunk/libf/dyn3d/Read_reanalyse

Inlined procedure "pression".

Split "guide.f90" into "guide.f90" and "tau2alpha.f90". Split
"read_reanalyse.f" into single-procedure files in directory
"Read_reanalyse".

Useless copy of variables in "iniphysiq". Directly define module
variables in "gcm" and remove procedure "iniphysiq".

Added "pressure-altitude" in "test_disvert".

	ViewVC Help
Powered by ViewVC 1.1.21

Log of /trunk/dyn3d/Guide/Read_reanalyse