trunk/dyn3d/dynetat0.f

module dynetat0_m

  IMPLICIT NONE

  INTEGER day_ini

contains

  SUBROUTINE dynetat0(vcov, ucov, teta, q, masse, ps, phis, time_0)

    ! From dynetat0.F, version 1.2, 2004/06/22 11:45:30
    ! Authors: P. Le Van, L. Fairhead
    ! This procedure reads the initial state of the atmosphere.

    use comconst, only: dtvr
    use comgeom, only: rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d
    use dimens_m, only: iim, jjm, llm, nqmx
    use disvert_m, only: pa
    use ener, only: etot0, ang0, ptot0, stot0, ztot0
    use iniadvtrac_m, only: tname
    use netcdf, only: NF90_NOWRITE, NF90_NOERR
    use netcdf95, only: NF95_GET_VAR, nf95_open, nf95_inq_varid, NF95_CLOSE, &
         NF95_Gw_VAR
    use nr_util, only: assert
    use serre, only: clon, clat, grossismy, grossismx, dzoomx, dzoomy, taux, &
         tauy
    use temps, only: day_ref, itau_dyn, annee_ref

    REAL, intent(out):: vcov(: , :, :) ! (iim + 1, jjm, llm)
    REAL, intent(out):: ucov(:, :, :) ! (iim + 1, jjm + 1, llm)
    REAL, intent(out):: teta(:, :, :) ! (iim + 1, jjm + 1, llm)
    REAL, intent(out):: q(:, :, :, :) ! (iim + 1, jjm + 1, llm, nqmx)
    REAL, intent(out):: masse(:, :, :) ! (iim + 1, jjm + 1, llm)
    REAL, intent(out):: ps(:, :) ! (iim + 1, jjm + 1) in Pa
    REAL, intent(out):: phis(:, :) ! (iim + 1, jjm + 1)
    REAL, intent(out):: time_0

    ! Local variables: 
    INTEGER iq
    REAL, pointer:: tab_cntrl(:) ! tableau des paramètres du run
    INTEGER ierr, ncid, varid

    !-----------------------------------------------------------------------

    print *, "Call sequence information: dynetat0"

    call assert((/size(ucov, 1), size(vcov, 1), size(masse, 1), size(ps, 1), &
         size(phis, 1), size(q, 1), size(teta, 1)/) == iim + 1, "dynetat0 iim")
    call assert((/size(ucov, 2), size(vcov, 2) + 1, size(masse, 2), &
         size(ps, 2), size(phis, 2), size(q, 2), size(teta, 2)/) == jjm + 1, &
         "dynetat0 jjm")
    call assert((/size(vcov, 3), size(ucov, 3), size(teta, 3), size(q, 3), &
         size(masse, 3)/) == llm, "dynetat0 llm")
    call assert(size(q, 4) == nqmx, "dynetat0 q nqmx")

    ! Fichier état initial :
    call nf95_open("start.nc", NF90_NOWRITE, ncid)

    call nf95_inq_varid(ncid, "controle", varid)
    call NF95_Gw_VAR(ncid, varid, tab_cntrl)

    call assert(int(tab_cntrl(1)) == iim, "dynetat0 tab_cntrl iim") 
    call assert(int(tab_cntrl(2)) == jjm, "dynetat0 tab_cntrl jjm") 
    call assert(int(tab_cntrl(3)) == llm, "dynetat0 tab_cntrl llm") 

    day_ref = int(tab_cntrl(4))
    annee_ref = int(tab_cntrl(5))

    IF (dtvr /= tab_cntrl(12)) THEN
       print *, 'Warning: the time steps from day_step and "start.nc" ' // &
          'are different.'
       print *, 'dtvr from day_step: ', dtvr
       print *, 'dtvr from "start.nc": ', tab_cntrl(12)
       print *, 'Using the value from day_step.'
    ENDIF

    etot0 = tab_cntrl(13)
    ptot0 = tab_cntrl(14)
    ztot0 = tab_cntrl(15)
    stot0 = tab_cntrl(16)
    ang0 = tab_cntrl(17)
    pa = tab_cntrl(18)

    clon = tab_cntrl(20)
    clat = tab_cntrl(21)
    grossismx = tab_cntrl(22)
    grossismy = tab_cntrl(23)
    dzoomx = tab_cntrl(25)
    dzoomy = tab_cntrl(26)
    taux = tab_cntrl(28)
    tauy = tab_cntrl(29)

    itau_dyn = tab_cntrl(31)

    call NF95_INQ_VARID (ncid, "rlonu", varid)
    call NF95_GET_VAR(ncid, varid, rlonu)

    call NF95_INQ_VARID (ncid, "rlatu", varid)
    call NF95_GET_VAR(ncid, varid, rlatu)

    call NF95_INQ_VARID (ncid, "rlonv", varid)
    call NF95_GET_VAR(ncid, varid, rlonv)

    call NF95_INQ_VARID (ncid, "rlatv", varid)
    call NF95_GET_VAR(ncid, varid, rlatv)

    call NF95_INQ_VARID (ncid, "cu", varid)
    call NF95_GET_VAR(ncid, varid, cu_2d)

    call NF95_INQ_VARID (ncid, "cv", varid)
    call NF95_GET_VAR(ncid, varid, cv_2d)

    call NF95_INQ_VARID (ncid, "aire", varid)
    call NF95_GET_VAR(ncid, varid, aire_2d)

    call NF95_INQ_VARID (ncid, "phisinit", varid)
    call NF95_GET_VAR(ncid, varid, phis)

    call NF95_INQ_VARID (ncid, "temps", varid)
    call NF95_GET_VAR(ncid, varid, time_0)

    day_ini = tab_cntrl(30) + INT(time_0)
    time_0 = time_0 - INT(time_0)
    ! {0 <= time0 < 1}

    deallocate(tab_cntrl) ! pointer

    call NF95_INQ_VARID (ncid, "ucov", varid)
    call NF95_GET_VAR(ncid, varid, ucov)

    call NF95_INQ_VARID (ncid, "vcov", varid)
    call NF95_GET_VAR(ncid, varid, vcov)

    call NF95_INQ_VARID (ncid, "teta", varid)
    call NF95_GET_VAR(ncid, varid, teta)

    DO iq = 1, nqmx
       call NF95_INQ_VARID(ncid, tname(iq), varid, ierr)
       IF (ierr /= NF90_NOERR) THEN
          PRINT *, 'dynetat0: "' // tname(iq) // '" not found, ' // &
               "setting it to zero..."
          q(:, :, :, iq) = 0.
       ELSE
          call NF95_GET_VAR(ncid, varid, q(:, :, :, iq))
       ENDIF
    ENDDO

    call NF95_INQ_VARID (ncid, "masse", varid)
    call NF95_GET_VAR(ncid, varid, masse)

    call NF95_INQ_VARID (ncid, "ps", varid)
    call NF95_GET_VAR(ncid, varid, ps)
    ! Check that there is a single value at each pole:
    call assert(ps(1, 1) == ps(2:, 1), "dynetat0 ps north pole")
    call assert(ps(1, jjm + 1) == ps(2:, jjm + 1), "dynetat0 ps south pole")

    call NF95_CLOSE(ncid)

  END SUBROUTINE dynetat0

end module dynetat0_m
1	guez	3	module dynetat0_m
2
3			IMPLICIT NONE
4
5	guez	25	INTEGER day_ini
6
7	guez	3	contains
8
9	guez	25	SUBROUTINE dynetat0(vcov, ucov, teta, q, masse, ps, phis, time_0)
10	guez	3
11	guez	38	! From dynetat0.F, version 1.2, 2004/06/22 11:45:30
12			! Authors: P. Le Van, L. Fairhead
13	guez	39	! This procedure reads the initial state of the atmosphere.
14	guez	3
15	guez	79	use comconst, only: dtvr
16	guez	3	use comgeom, only: rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d
17	guez	38	use dimens_m, only: iim, jjm, llm, nqmx
18	guez	67	use disvert_m, only: pa
19	guez	3	use ener, only: etot0, ang0, ptot0, stot0, ztot0
20	guez	18	use iniadvtrac_m, only: tname
21	guez	67	use netcdf, only: NF90_NOWRITE, NF90_NOERR
22	guez	44	use netcdf95, only: NF95_GET_VAR, nf95_open, nf95_inq_varid, NF95_CLOSE, &
23			NF95_Gw_VAR
24	guez	36	use nr_util, only: assert
25	guez	113	use serre, only: clon, clat, grossismy, grossismx, dzoomx, dzoomy, taux, &
26			tauy
27	guez	38	use temps, only: day_ref, itau_dyn, annee_ref
28	guez	3
29	guez	55	REAL, intent(out):: vcov(: , :, :) ! (iim + 1, jjm, llm)
30			REAL, intent(out):: ucov(:, :, :) ! (iim + 1, jjm + 1, llm)
31	guez	43	REAL, intent(out):: teta(:, :, :) ! (iim + 1, jjm + 1, llm)
32	guez	40	REAL, intent(out):: q(:, :, :, :) ! (iim + 1, jjm + 1, llm, nqmx)
33	guez	55	REAL, intent(out):: masse(:, :, :) ! (iim + 1, jjm + 1, llm)
34	guez	39	REAL, intent(out):: ps(:, :) ! (iim + 1, jjm + 1) in Pa
35			REAL, intent(out):: phis(:, :) ! (iim + 1, jjm + 1)
36	guez	25	REAL, intent(out):: time_0
37	guez	3
38	guez	44	! Local variables:
39	guez	38	INTEGER iq
40	guez	44	REAL, pointer:: tab_cntrl(:) ! tableau des paramètres du run
41	guez	38	INTEGER ierr, ncid, varid
42	guez	3
43			!-----------------------------------------------------------------------
44
45			print *, "Call sequence information: dynetat0"
46
47	guez	55	call assert((/size(ucov, 1), size(vcov, 1), size(masse, 1), size(ps, 1), &
48			size(phis, 1), size(q, 1), size(teta, 1)/) == iim + 1, "dynetat0 iim")
49			call assert((/size(ucov, 2), size(vcov, 2) + 1, size(masse, 2), &
50			size(ps, 2), size(phis, 2), size(q, 2), size(teta, 2)/) == jjm + 1, &
51			"dynetat0 jjm")
52			call assert((/size(vcov, 3), size(ucov, 3), size(teta, 3), size(q, 3), &
53			size(masse, 3)/) == llm, "dynetat0 llm")
54	guez	40	call assert(size(q, 4) == nqmx, "dynetat0 q nqmx")
55	guez	3
56			! Fichier état initial :
57	guez	25	call nf95_open("start.nc", NF90_NOWRITE, ncid)
58	guez	3
59	guez	38	call nf95_inq_varid(ncid, "controle", varid)
60	guez	44	call NF95_Gw_VAR(ncid, varid, tab_cntrl)
61	guez	3
62	guez	79	call assert(int(tab_cntrl(1)) == iim, "dynetat0 tab_cntrl iim")
63			call assert(int(tab_cntrl(2)) == jjm, "dynetat0 tab_cntrl jjm")
64			call assert(int(tab_cntrl(3)) == llm, "dynetat0 tab_cntrl llm")
65	guez	3
66	guez	38	day_ref = int(tab_cntrl(4))
67			annee_ref = int(tab_cntrl(5))
68	guez	79
69			IF (dtvr /= tab_cntrl(12)) THEN
70			print *, 'Warning: the time steps from day_step and "start.nc" ' // &
71			'are different.'
72			print *, 'dtvr from day_step: ', dtvr
73			print *, 'dtvr from "start.nc": ', tab_cntrl(12)
74			print *, 'Using the value from day_step.'
75			ENDIF
76
77	guez	38	etot0 = tab_cntrl(13)
78			ptot0 = tab_cntrl(14)
79			ztot0 = tab_cntrl(15)
80			stot0 = tab_cntrl(16)
81			ang0 = tab_cntrl(17)
82			pa = tab_cntrl(18)
83	guez	113
84	guez	38	clon = tab_cntrl(20)
85			clat = tab_cntrl(21)
86			grossismx = tab_cntrl(22)
87			grossismy = tab_cntrl(23)
88	guez	113	dzoomx = tab_cntrl(25)
89			dzoomy = tab_cntrl(26)
90			taux = tab_cntrl(28)
91			tauy = tab_cntrl(29)
92
93	guez	3	itau_dyn = tab_cntrl(31)
94
95	guez	38	call NF95_INQ_VARID (ncid, "rlonu", varid)
96			call NF95_GET_VAR(ncid, varid, rlonu)
97	guez	3
98	guez	38	call NF95_INQ_VARID (ncid, "rlatu", varid)
99			call NF95_GET_VAR(ncid, varid, rlatu)
100	guez	3
101	guez	38	call NF95_INQ_VARID (ncid, "rlonv", varid)
102			call NF95_GET_VAR(ncid, varid, rlonv)
103	guez	3
104	guez	38	call NF95_INQ_VARID (ncid, "rlatv", varid)
105			call NF95_GET_VAR(ncid, varid, rlatv)
106	guez	3
107	guez	38	call NF95_INQ_VARID (ncid, "cu", varid)
108			call NF95_GET_VAR(ncid, varid, cu_2d)
109	guez	3
110	guez	38	call NF95_INQ_VARID (ncid, "cv", varid)
111			call NF95_GET_VAR(ncid, varid, cv_2d)
112	guez	3
113	guez	38	call NF95_INQ_VARID (ncid, "aire", varid)
114			call NF95_GET_VAR(ncid, varid, aire_2d)
115	guez	3
116	guez	38	call NF95_INQ_VARID (ncid, "phisinit", varid)
117			call NF95_GET_VAR(ncid, varid, phis)
118	guez	3
119	guez	38	call NF95_INQ_VARID (ncid, "temps", varid)
120			call NF95_GET_VAR(ncid, varid, time_0)
121	guez	3
122	guez	38	day_ini = tab_cntrl(30) + INT(time_0)
123			time_0 = time_0 - INT(time_0)
124			! {0 <= time0 < 1}
125	guez	3
126	guez	44	deallocate(tab_cntrl) ! pointer
127
128	guez	38	call NF95_INQ_VARID (ncid, "ucov", varid)
129	guez	55	call NF95_GET_VAR(ncid, varid, ucov)
130	guez	3
131	guez	38	call NF95_INQ_VARID (ncid, "vcov", varid)
132	guez	55	call NF95_GET_VAR(ncid, varid, vcov)
133	guez	3
134	guez	38	call NF95_INQ_VARID (ncid, "teta", varid)
135	guez	43	call NF95_GET_VAR(ncid, varid, teta)
136	guez	3
137			DO iq = 1, nqmx
138	guez	38	call NF95_INQ_VARID(ncid, tname(iq), varid, ierr)
139			IF (ierr /= NF90_NOERR) THEN
140			PRINT *, 'dynetat0: "' // tname(iq) // '" not found, ' // &
141			"setting it to zero..."
142	guez	40	q(:, :, :, iq) = 0.
143	guez	3	ELSE
144	guez	40	call NF95_GET_VAR(ncid, varid, q(:, :, :, iq))
145	guez	3	ENDIF
146			ENDDO
147
148	guez	38	call NF95_INQ_VARID (ncid, "masse", varid)
149	guez	55	call NF95_GET_VAR(ncid, varid, masse)
150	guez	3
151	guez	38	call NF95_INQ_VARID (ncid, "ps", varid)
152	guez	39	call NF95_GET_VAR(ncid, varid, ps)
153	guez	85	! Check that there is a single value at each pole:
154			call assert(ps(1, 1) == ps(2:, 1), "dynetat0 ps north pole")
155			call assert(ps(1, jjm + 1) == ps(2:, jjm + 1), "dynetat0 ps south pole")
156	guez	3
157	guez	25	call NF95_CLOSE(ncid)
158	guez	3
159			END SUBROUTINE dynetat0
160
161			end module dynetat0_m