/[lmdze]/trunk/dyn3d/dynetat0.f
ViewVC logotype

Annotation of /trunk/dyn3d/dynetat0.f

Parent Directory Parent Directory | Revision Log Revision Log

Revision 76 - (hide annotations)
Fri Nov 15 18:45:49 2013 UTC (10 years, 6 months ago) by guez
Original Path: trunk/dyn3d/dynetat0.f90
File size: 4823 byte(s) 
Moved everything out of libf.
1 guez 3 module dynetat0_m
2    
3     IMPLICIT NONE
4    
5 guez 25 INTEGER day_ini
6    
7 guez 3 contains
8    
9 guez 25 SUBROUTINE dynetat0(vcov, ucov, teta, q, masse, ps, phis, time_0)
10 guez 3
11 guez 38 ! From dynetat0.F, version 1.2, 2004/06/22 11:45:30
12     ! Authors: P. Le Van, L. Fairhead
13 guez 39 ! This procedure reads the initial state of the atmosphere.
14 guez 3
15 guez 39 use comconst, only: im, dtvr, jm, lllm
16 guez 3 use comgeom, only: rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d
17 guez 67 use conf_gcm_m, only: fxyhypb, ysinus
18 guez 38 use dimens_m, only: iim, jjm, llm, nqmx
19 guez 67 use disvert_m, only: pa
20 guez 3 use ener, only: etot0, ang0, ptot0, stot0, ztot0
21 guez 18 use iniadvtrac_m, only: tname
22 guez 67 use netcdf, only: NF90_NOWRITE, NF90_NOERR
23 guez 44 use netcdf95, only: NF95_GET_VAR, nf95_open, nf95_inq_varid, NF95_CLOSE, &
24     NF95_Gw_VAR
25 guez 36 use nr_util, only: assert
26 guez 67 use serre, only: clon, clat, grossismy, grossismx
27 guez 38 use temps, only: day_ref, itau_dyn, annee_ref
28 guez 3
29 guez 55 REAL, intent(out):: vcov(: , :, :) ! (iim + 1, jjm, llm)
30     REAL, intent(out):: ucov(:, :, :) ! (iim + 1, jjm + 1, llm)
31 guez 43 REAL, intent(out):: teta(:, :, :) ! (iim + 1, jjm + 1, llm)
32 guez 40 REAL, intent(out):: q(:, :, :, :) ! (iim + 1, jjm + 1, llm, nqmx)
33 guez 55 REAL, intent(out):: masse(:, :, :) ! (iim + 1, jjm + 1, llm)
34 guez 39 REAL, intent(out):: ps(:, :) ! (iim + 1, jjm + 1) in Pa
35     REAL, intent(out):: phis(:, :) ! (iim + 1, jjm + 1)
36 guez 25 REAL, intent(out):: time_0
37 guez 3
38 guez 44 ! Local variables:
39 guez 38 INTEGER iq
40 guez 44 REAL, pointer:: tab_cntrl(:) ! tableau des paramètres du run
41 guez 38 INTEGER ierr, ncid, varid
42 guez 3
43     !-----------------------------------------------------------------------
44    
45     print *, "Call sequence information: dynetat0"
46    
47 guez 55 call assert((/size(ucov, 1), size(vcov, 1), size(masse, 1), size(ps, 1), &
48     size(phis, 1), size(q, 1), size(teta, 1)/) == iim + 1, "dynetat0 iim")
49     call assert((/size(ucov, 2), size(vcov, 2) + 1, size(masse, 2), &
50     size(ps, 2), size(phis, 2), size(q, 2), size(teta, 2)/) == jjm + 1, &
51     "dynetat0 jjm")
52     call assert((/size(vcov, 3), size(ucov, 3), size(teta, 3), size(q, 3), &
53     size(masse, 3)/) == llm, "dynetat0 llm")
54 guez 40 call assert(size(q, 4) == nqmx, "dynetat0 q nqmx")
55 guez 3
56     ! Fichier état initial :
57 guez 25 call nf95_open("start.nc", NF90_NOWRITE, ncid)
58 guez 3
59 guez 38 call nf95_inq_varid(ncid, "controle", varid)
60 guez 44 call NF95_Gw_VAR(ncid, varid, tab_cntrl)
61 guez 3
62 guez 38 im = int(tab_cntrl(1))
63     jm = int(tab_cntrl(2))
64     lllm = int(tab_cntrl(3))
65     call assert(im == iim, "dynetat0 im iim")
66     call assert(jm == jjm, "dynetat0 jm jjm")
67     call assert(lllm == llm, "dynetat0 lllm llm")
68 guez 3
69 guez 38 day_ref = int(tab_cntrl(4))
70     annee_ref = int(tab_cntrl(5))
71     dtvr = tab_cntrl(12)
72     etot0 = tab_cntrl(13)
73     ptot0 = tab_cntrl(14)
74     ztot0 = tab_cntrl(15)
75     stot0 = tab_cntrl(16)
76     ang0 = tab_cntrl(17)
77     pa = tab_cntrl(18)
78     clon = tab_cntrl(20)
79     clat = tab_cntrl(21)
80     grossismx = tab_cntrl(22)
81     grossismy = tab_cntrl(23)
82     fxyhypb = tab_cntrl(24) == 1.
83     if (.not. fxyhypb) ysinus = tab_cntrl(27) == 1.
84 guez 3 itau_dyn = tab_cntrl(31)
85    
86 guez 38 call NF95_INQ_VARID (ncid, "rlonu", varid)
87     call NF95_GET_VAR(ncid, varid, rlonu)
88 guez 3
89 guez 38 call NF95_INQ_VARID (ncid, "rlatu", varid)
90     call NF95_GET_VAR(ncid, varid, rlatu)
91 guez 3
92 guez 38 call NF95_INQ_VARID (ncid, "rlonv", varid)
93     call NF95_GET_VAR(ncid, varid, rlonv)
94 guez 3
95 guez 38 call NF95_INQ_VARID (ncid, "rlatv", varid)
96     call NF95_GET_VAR(ncid, varid, rlatv)
97 guez 3
98 guez 38 call NF95_INQ_VARID (ncid, "cu", varid)
99     call NF95_GET_VAR(ncid, varid, cu_2d)
100 guez 3
101 guez 38 call NF95_INQ_VARID (ncid, "cv", varid)
102     call NF95_GET_VAR(ncid, varid, cv_2d)
103 guez 3
104 guez 38 call NF95_INQ_VARID (ncid, "aire", varid)
105     call NF95_GET_VAR(ncid, varid, aire_2d)
106 guez 3
107 guez 38 call NF95_INQ_VARID (ncid, "phisinit", varid)
108     call NF95_GET_VAR(ncid, varid, phis)
109 guez 3
110 guez 38 call NF95_INQ_VARID (ncid, "temps", varid)
111     call NF95_GET_VAR(ncid, varid, time_0)
112 guez 3
113 guez 38 day_ini = tab_cntrl(30) + INT(time_0)
114     time_0 = time_0 - INT(time_0)
115     ! {0 <= time0 < 1}
116 guez 3
117 guez 44 deallocate(tab_cntrl) ! pointer
118    
119 guez 38 call NF95_INQ_VARID (ncid, "ucov", varid)
120 guez 55 call NF95_GET_VAR(ncid, varid, ucov)
121 guez 3
122 guez 38 call NF95_INQ_VARID (ncid, "vcov", varid)
123 guez 55 call NF95_GET_VAR(ncid, varid, vcov)
124 guez 3
125 guez 38 call NF95_INQ_VARID (ncid, "teta", varid)
126 guez 43 call NF95_GET_VAR(ncid, varid, teta)
127 guez 3
128     DO iq = 1, nqmx
129 guez 38 call NF95_INQ_VARID(ncid, tname(iq), varid, ierr)
130     IF (ierr /= NF90_NOERR) THEN
131     PRINT *, 'dynetat0: "' // tname(iq) // '" not found, ' // &
132     "setting it to zero..."
133 guez 40 q(:, :, :, iq) = 0.
134 guez 3 ELSE
135 guez 40 call NF95_GET_VAR(ncid, varid, q(:, :, :, iq))
136 guez 3 ENDIF
137     ENDDO
138    
139 guez 38 call NF95_INQ_VARID (ncid, "masse", varid)
140 guez 55 call NF95_GET_VAR(ncid, varid, masse)
141 guez 3
142 guez 38 call NF95_INQ_VARID (ncid, "ps", varid)
143 guez 39 call NF95_GET_VAR(ncid, varid, ps)
144 guez 3
145 guez 25 call NF95_CLOSE(ncid)
146 guez 3
147     END SUBROUTINE dynetat0
148    
149     end module dynetat0_m
  ViewVC Help
Powered by ViewVC 1.1.21