trunk/dyn3d/dynredem0.f

MODULE dynredem0_m

  IMPLICIT NONE

CONTAINS

  SUBROUTINE dynredem0(fichnom, iday_end, phis)

    ! From dyn3d/dynredem.F, version 1.2, 2004/06/22 11:45:30
    ! \'Ecriture du fichier de red\'emarrage au format NetCDF (initialisation)

    USE comconst, ONLY: cpp, daysec, dtvr, g, kappa, omeg, rad
    USE comgeom, ONLY: aire_2d, cu_2d, cv_2d, rlatu, rlatv, rlonu, rlonv
    USE dimens_m, ONLY: iim, jjm, llm, nqmx
    USE disvert_m, ONLY: ap, bp, pa, preff, presnivs
    use dynetat0_m, only: day_ref, annee_ref
    USE ener, ONLY: ang0, etot0, ptot0, stot0, ztot0
    USE iniadvtrac_m, ONLY: tname, ttext
    USE ju2ymds_m, ONLY: ju2ymds
    USE netcdf, ONLY: nf90_clobber, nf90_float, nf90_global, nf90_unlimited
    USE netcdf95, ONLY: nf95_close, nf95_create, nf95_def_dim, nf95_def_var, &
         nf95_enddef, nf95_inq_varid, nf95_put_att, nf95_put_var
    USE paramet_m, ONLY: iip1, jjp1, llmp1
    USE serre, ONLY: clat, clon, dzoomx, dzoomy, grossismx, grossismy, taux, &
         tauy
    use ymds2ju_m, only: ymds2ju

    CHARACTER(len=*), INTENT(IN):: fichnom
    INTEGER, INTENT(IN):: iday_end
    REAL, INTENT(IN):: phis(:, :)

    ! Local:

    INTEGER iq, l
    INTEGER, PARAMETER:: length = 100
    REAL tab_cntrl(length) ! tableau des param\`etres du run

    ! Pour NetCDF :
    INTEGER idim_index
    INTEGER idim_rlonu, idim_rlonv, idim_rlatu, idim_rlatv
    INTEGER idim_s, idim_sig
    INTEGER dimid_temps
    INTEGER ncid, varid

    REAL zjulian, hours
    INTEGER yyears0, jjour0, mmois0
    CHARACTER(len=30) unites

    !-----------------------------------------------------------------------

    PRINT *, 'Call sequence information: dynredem0'

    CALL ymds2ju(annee_ref, 1, iday_end, 0., zjulian)
    CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)

    tab_cntrl(1) = iim
    tab_cntrl(2) = jjm
    tab_cntrl(3) = llm
    tab_cntrl(4) = day_ref
    tab_cntrl(5) = annee_ref
    tab_cntrl(6) = rad
    tab_cntrl(7) = omeg
    tab_cntrl(8) = g
    tab_cntrl(9) = cpp
    tab_cntrl(10) = kappa
    tab_cntrl(11) = daysec
    tab_cntrl(12) = dtvr
    tab_cntrl(13) = etot0
    tab_cntrl(14) = ptot0
    tab_cntrl(15) = ztot0
    tab_cntrl(16) = stot0
    tab_cntrl(17) = ang0
    tab_cntrl(18) = pa
    tab_cntrl(19) = preff

    ! Param\`etres pour le zoom :
    tab_cntrl(20) = clon
    tab_cntrl(21) = clat
    tab_cntrl(22) = grossismx
    tab_cntrl(23) = grossismy
    tab_cntrl(24) = 1.
    tab_cntrl(25) = dzoomx
    tab_cntrl(26) = dzoomy
    tab_cntrl(27) = 0.
    tab_cntrl(28) = taux
    tab_cntrl(29) = tauy

    tab_cntrl(30) = iday_end
    tab_cntrl(31:) = 0.

    CALL nf95_create(fichnom, nf90_clobber, ncid)
    CALL nf95_put_att(ncid, nf90_global, 'title', &
         'start file for the dynamics code')

    ! Definir les dimensions du fichiers:

    CALL nf95_def_dim(ncid, 'index', length, idim_index)
    CALL nf95_def_dim(ncid, 'rlonu', iip1, idim_rlonu)
    CALL nf95_def_dim(ncid, 'rlatu', jjp1, idim_rlatu)
    CALL nf95_def_dim(ncid, 'rlonv', iip1, idim_rlonv)
    CALL nf95_def_dim(ncid, 'rlatv', jjm, idim_rlatv)
    CALL nf95_def_dim(ncid, 'sigs', llm, idim_s)
    CALL nf95_def_dim(ncid, 'sig', llmp1, idim_sig)
    CALL nf95_def_dim(ncid, 'temps', nf90_unlimited, dimid_temps)

    ! Definir et enregistrer certains champs invariants:

    CALL nf95_def_var(ncid, 'controle', nf90_float, idim_index, varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Parametres de controle')

    CALL nf95_def_var(ncid, 'rlonu', nf90_float, idim_rlonu, varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Longitudes des points U')

    CALL nf95_def_var(ncid, 'rlatu', nf90_float, idim_rlatu, varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Latitudes des points U')

    CALL nf95_def_var(ncid, 'rlonv', nf90_float, idim_rlonv, varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Longitudes des points V')

    CALL nf95_def_var(ncid, 'rlatv', nf90_float, idim_rlatv, varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Latitudes des points V')

    CALL nf95_def_var(ncid, 'ap', nf90_float, idim_sig, varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Coefficient A pour hybride')

    CALL nf95_def_var(ncid, 'bp', nf90_float, idim_sig, varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Coefficient B pour hybride')

    CALL nf95_def_var(ncid, 'presnivs', nf90_float, idim_s, varid)

    ! Coefficients de passage cov. <-> contra. <--> naturel

    CALL nf95_def_var(ncid, 'cu', nf90_float, (/idim_rlonu, idim_rlatu/), varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Coefficient de passage pour U')

    CALL nf95_def_var(ncid, 'cv', nf90_float, (/idim_rlonv, idim_rlatv/), varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Coefficient de passage pour V')

    ! Aire de chaque maille:

    CALL nf95_def_var(ncid, 'aire', nf90_float, (/idim_rlonv, idim_rlatu/), &
         varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Aires de chaque maille')

    ! Geopentiel au sol:

    CALL nf95_def_var(ncid, 'phisinit', nf90_float, &
         (/idim_rlonv, idim_rlatu/), varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Geopotentiel au sol')

    ! Definir les variables pour pouvoir les enregistrer plus tard:

    CALL nf95_def_var(ncid, 'temps', nf90_float, dimid_temps, varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Temps de simulation')
    WRITE(unites, fmt = 200) yyears0, mmois0, jjour0
200 FORMAT ('days since ', I4, '-', I2.2, '-', I2.2, ' 00:00:00')
    CALL nf95_put_att(ncid, varid, 'units', unites)

    CALL nf95_def_var(ncid, 'ucov', nf90_float, &
         (/idim_rlonu, idim_rlatu, idim_s, dimid_temps/), varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Vitesse U')

    CALL nf95_def_var(ncid, 'vcov', nf90_float, &
         (/idim_rlonv, idim_rlatv, idim_s, dimid_temps/), varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Vitesse V')

    CALL nf95_def_var(ncid, 'teta', nf90_float, &
         (/idim_rlonv, idim_rlatu, idim_s, dimid_temps/), varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Temperature')

    DO iq = 1, nqmx
       CALL nf95_def_var(ncid, tname(iq), nf90_float, &
            (/idim_rlonv, idim_rlatu, idim_s, dimid_temps/), varid)
       CALL nf95_put_att(ncid, varid, 'title', ttext(iq))
    END DO

    CALL nf95_def_var(ncid, 'masse', nf90_float, &
         (/idim_rlonv, idim_rlatu, idim_s, dimid_temps/), varid)
    CALL nf95_put_att(ncid, varid, 'title', 'C est quoi ?')

    CALL nf95_def_var(ncid, 'ps', nf90_float, &
         (/idim_rlonv, idim_rlatu, dimid_temps/), varid)
    CALL nf95_put_att(ncid, varid, 'title', 'Pression au sol')

    CALL nf95_enddef(ncid)

    CALL nf95_inq_varid(ncid, 'controle', varid)
    CALL nf95_put_var(ncid, varid, tab_cntrl)

    CALL nf95_inq_varid(ncid, 'rlonu', varid)
    CALL nf95_put_var(ncid, varid, rlonu)

    CALL nf95_inq_varid(ncid, 'rlatu', varid)
    CALL nf95_put_var(ncid, varid, rlatu)

    CALL nf95_inq_varid(ncid, 'rlonv', varid)
    CALL nf95_put_var(ncid, varid, rlonv)

    CALL nf95_inq_varid(ncid, 'rlatv', varid)
    CALL nf95_put_var(ncid, varid, rlatv)

    CALL nf95_inq_varid(ncid, 'ap', varid)
    CALL nf95_put_var(ncid, varid, ap)

    CALL nf95_inq_varid(ncid, 'bp', varid)
    CALL nf95_put_var(ncid, varid, bp)

    CALL nf95_inq_varid(ncid, 'presnivs', varid)
    CALL nf95_put_var(ncid, varid, presnivs)

    CALL nf95_inq_varid(ncid, 'cu', varid)
    CALL nf95_put_var(ncid, varid, cu_2d)

    CALL nf95_inq_varid(ncid, 'cv', varid)
    CALL nf95_put_var(ncid, varid, cv_2d)

    CALL nf95_inq_varid(ncid, 'aire', varid)
    CALL nf95_put_var(ncid, varid, aire_2d)

    CALL nf95_inq_varid(ncid, 'phisinit', varid)
    CALL nf95_put_var(ncid, varid, phis)

    CALL nf95_close(ncid) ! fermer le fichier

    PRINT *, 'iim, jjm, llm, iday_end', iim, jjm, llm, iday_end
    PRINT *, 'rad, omeg, g, cpp, kappa', rad, omeg, g, cpp, kappa

  END SUBROUTINE dynredem0

END MODULE dynredem0_m
1	guez	18	MODULE dynredem0_m
2	guez	3
3	guez	7	IMPLICIT NONE
4	guez	3
5	guez	18	CONTAINS
6	guez	3
7	guez	7	SUBROUTINE dynredem0(fichnom, iday_end, phis)
8	guez	3
9	guez	138	! From dyn3d/dynredem.F, version 1.2, 2004/06/22 11:45:30
10			! \'Ecriture du fichier de red\'emarrage au format NetCDF (initialisation)
11	guez	3
12	guez	62	USE comconst, ONLY: cpp, daysec, dtvr, g, kappa, omeg, rad
13			USE comgeom, ONLY: aire_2d, cu_2d, cv_2d, rlatu, rlatv, rlonu, rlonv
14			USE dimens_m, ONLY: iim, jjm, llm, nqmx
15	guez	92	USE disvert_m, ONLY: ap, bp, pa, preff, presnivs
16	guez	129	use dynetat0_m, only: day_ref, annee_ref
17	guez	62	USE ener, ONLY: ang0, etot0, ptot0, stot0, ztot0
18			USE iniadvtrac_m, ONLY: tname, ttext
19	guez	92	USE ju2ymds_m, ONLY: ju2ymds
20			USE netcdf, ONLY: nf90_clobber, nf90_float, nf90_global, nf90_unlimited
21	guez	62	USE netcdf95, ONLY: nf95_close, nf95_create, nf95_def_dim, nf95_def_var, &
22			nf95_enddef, nf95_inq_varid, nf95_put_att, nf95_put_var
23			USE paramet_m, ONLY: iip1, jjp1, llmp1
24			USE serre, ONLY: clat, clon, dzoomx, dzoomy, grossismx, grossismy, taux, &
25			tauy
26	guez	92	use ymds2ju_m, only: ymds2ju
27	guez	5
28	guez	62	CHARACTER(len=*), INTENT(IN):: fichnom
29			INTEGER, INTENT(IN):: iday_end
30			REAL, INTENT(IN):: phis(:, :)
31	guez	5
32	guez	62	! Local:
33	guez	3
34	guez	62	INTEGER iq, l
35	guez	22	INTEGER, PARAMETER:: length = 100
36	guez	138	REAL tab_cntrl(length) ! tableau des param\`etres du run
37	guez	5
38	guez	116	! Pour NetCDF :
39	guez	62	INTEGER idim_index
40			INTEGER idim_rlonu, idim_rlonv, idim_rlatu, idim_rlatv
41			INTEGER idim_s, idim_sig
42	guez	128	INTEGER dimid_temps
43	guez	62	INTEGER ncid, varid
44	guez	3
45	guez	62	REAL zjulian, hours
46			INTEGER yyears0, jjour0, mmois0
47			CHARACTER(len=30) unites
48	guez	3
49	guez	7	!-----------------------------------------------------------------------
50	guez	3
51	guez	18	PRINT *, 'Call sequence information: dynredem0'
52	guez	3
53	guez	23	CALL ymds2ju(annee_ref, 1, iday_end, 0., zjulian)
54	guez	18	CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)
55	guez	5
56	guez	129	tab_cntrl(1) = iim
57			tab_cntrl(2) = jjm
58			tab_cntrl(3) = llm
59			tab_cntrl(4) = day_ref
60			tab_cntrl(5) = annee_ref
61	guez	18	tab_cntrl(6) = rad
62			tab_cntrl(7) = omeg
63			tab_cntrl(8) = g
64			tab_cntrl(9) = cpp
65	guez	7	tab_cntrl(10) = kappa
66			tab_cntrl(11) = daysec
67			tab_cntrl(12) = dtvr
68			tab_cntrl(13) = etot0
69			tab_cntrl(14) = ptot0
70			tab_cntrl(15) = ztot0
71			tab_cntrl(16) = stot0
72			tab_cntrl(17) = ang0
73			tab_cntrl(18) = pa
74			tab_cntrl(19) = preff
75	guez	5
76	guez	138	! Param\`etres pour le zoom :
77	guez	18	tab_cntrl(20) = clon
78			tab_cntrl(21) = clat
79			tab_cntrl(22) = grossismx
80			tab_cntrl(23) = grossismy
81	guez	113	tab_cntrl(24) = 1.
82			tab_cntrl(25) = dzoomx
83			tab_cntrl(26) = dzoomy
84			tab_cntrl(27) = 0.
85			tab_cntrl(28) = taux
86			tab_cntrl(29) = tauy
87	guez	5
88	guez	129	tab_cntrl(30) = iday_end
89	guez	138	tab_cntrl(31:) = 0.
90	guez	5
91	guez	39	CALL nf95_create(fichnom, nf90_clobber, ncid)
92			CALL nf95_put_att(ncid, nf90_global, 'title', &
93	guez	138	'start file for the dynamics code')
94	guez	5
95	guez	7	! Definir les dimensions du fichiers:
96	guez	5
97	guez	39	CALL nf95_def_dim(ncid, 'index', length, idim_index)
98			CALL nf95_def_dim(ncid, 'rlonu', iip1, idim_rlonu)
99			CALL nf95_def_dim(ncid, 'rlatu', jjp1, idim_rlatu)
100			CALL nf95_def_dim(ncid, 'rlonv', iip1, idim_rlonv)
101			CALL nf95_def_dim(ncid, 'rlatv', jjm, idim_rlatv)
102			CALL nf95_def_dim(ncid, 'sigs', llm, idim_s)
103			CALL nf95_def_dim(ncid, 'sig', llmp1, idim_sig)
104	guez	128	CALL nf95_def_dim(ncid, 'temps', nf90_unlimited, dimid_temps)
105	guez	5
106	guez	7	! Definir et enregistrer certains champs invariants:
107	guez	5
108	guez	39	CALL nf95_def_var(ncid, 'controle', nf90_float, idim_index, varid)
109			CALL nf95_put_att(ncid, varid, 'title', 'Parametres de controle')
110	guez	5
111	guez	39	CALL nf95_def_var(ncid, 'rlonu', nf90_float, idim_rlonu, varid)
112			CALL nf95_put_att(ncid, varid, 'title', 'Longitudes des points U')
113	guez	5
114	guez	39	CALL nf95_def_var(ncid, 'rlatu', nf90_float, idim_rlatu, varid)
115			CALL nf95_put_att(ncid, varid, 'title', 'Latitudes des points U')
116	guez	5
117	guez	39	CALL nf95_def_var(ncid, 'rlonv', nf90_float, idim_rlonv, varid)
118			CALL nf95_put_att(ncid, varid, 'title', 'Longitudes des points V')
119	guez	5
120	guez	39	CALL nf95_def_var(ncid, 'rlatv', nf90_float, idim_rlatv, varid)
121			CALL nf95_put_att(ncid, varid, 'title', 'Latitudes des points V')
122	guez	5
123	guez	39	CALL nf95_def_var(ncid, 'ap', nf90_float, idim_sig, varid)
124			CALL nf95_put_att(ncid, varid, 'title', 'Coefficient A pour hybride')
125	guez	5
126	guez	39	CALL nf95_def_var(ncid, 'bp', nf90_float, idim_sig, varid)
127			CALL nf95_put_att(ncid, varid, 'title', 'Coefficient B pour hybride')
128	guez	5
129	guez	39	CALL nf95_def_var(ncid, 'presnivs', nf90_float, idim_s, varid)
130	guez	5
131	guez	7	! Coefficients de passage cov. <-> contra. <--> naturel
132	guez	5
133	guez	62	CALL nf95_def_var(ncid, 'cu', nf90_float, (/idim_rlonu, idim_rlatu/), varid)
134	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Coefficient de passage pour U')
135	guez	5
136	guez	62	CALL nf95_def_var(ncid, 'cv', nf90_float, (/idim_rlonv, idim_rlatv/), varid)
137	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Coefficient de passage pour V')
138	guez	5
139	guez	7	! Aire de chaque maille:
140	guez	5
141	guez	62	CALL nf95_def_var(ncid, 'aire', nf90_float, (/idim_rlonv, idim_rlatu/), &
142			varid)
143	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Aires de chaque maille')
144	guez	5
145	guez	7	! Geopentiel au sol:
146	guez	5
147	guez	62	CALL nf95_def_var(ncid, 'phisinit', nf90_float, &
148			(/idim_rlonv, idim_rlatu/), varid)
149	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Geopotentiel au sol')
150	guez	5
151	guez	7	! Definir les variables pour pouvoir les enregistrer plus tard:
152	guez	3
153	guez	128	CALL nf95_def_var(ncid, 'temps', nf90_float, dimid_temps, varid)
154	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Temps de simulation')
155	guez	128	WRITE(unites, fmt = 200) yyears0, mmois0, jjour0
156	guez	18	200 FORMAT ('days since ', I4, '-', I2.2, '-', I2.2, ' 00:00:00')
157	guez	39	CALL nf95_put_att(ncid, varid, 'units', unites)
158	guez	7
159	guez	62	CALL nf95_def_var(ncid, 'ucov', nf90_float, &
160	guez	128	(/idim_rlonu, idim_rlatu, idim_s, dimid_temps/), varid)
161	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Vitesse U')
162	guez	5
163	guez	62	CALL nf95_def_var(ncid, 'vcov', nf90_float, &
164	guez	128	(/idim_rlonv, idim_rlatv, idim_s, dimid_temps/), varid)
165	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Vitesse V')
166	guez	5
167	guez	62	CALL nf95_def_var(ncid, 'teta', nf90_float, &
168	guez	128	(/idim_rlonv, idim_rlatu, idim_s, dimid_temps/), varid)
169	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Temperature')
170	guez	5
171	guez	18	DO iq = 1, nqmx
172	guez	62	CALL nf95_def_var(ncid, tname(iq), nf90_float, &
173	guez	128	(/idim_rlonv, idim_rlatu, idim_s, dimid_temps/), varid)
174	guez	39	CALL nf95_put_att(ncid, varid, 'title', ttext(iq))
175	guez	18	END DO
176	guez	5
177	guez	62	CALL nf95_def_var(ncid, 'masse', nf90_float, &
178	guez	128	(/idim_rlonv, idim_rlatu, idim_s, dimid_temps/), varid)
179	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'C est quoi ?')
180	guez	5
181	guez	62	CALL nf95_def_var(ncid, 'ps', nf90_float, &
182	guez	128	(/idim_rlonv, idim_rlatu, dimid_temps/), varid)
183	guez	39	CALL nf95_put_att(ncid, varid, 'title', 'Pression au sol')
184	guez	5
185	guez	39	CALL nf95_enddef(ncid)
186	guez	3
187	guez	39	CALL nf95_inq_varid(ncid, 'controle', varid)
188			CALL nf95_put_var(ncid, varid, tab_cntrl)
189	guez	3
190	guez	39	CALL nf95_inq_varid(ncid, 'rlonu', varid)
191			CALL nf95_put_var(ncid, varid, rlonu)
192	guez	18
193	guez	39	CALL nf95_inq_varid(ncid, 'rlatu', varid)
194			CALL nf95_put_var(ncid, varid, rlatu)
195	guez	18
196	guez	39	CALL nf95_inq_varid(ncid, 'rlonv', varid)
197			CALL nf95_put_var(ncid, varid, rlonv)
198	guez	18
199	guez	39	CALL nf95_inq_varid(ncid, 'rlatv', varid)
200			CALL nf95_put_var(ncid, varid, rlatv)
201	guez	18
202	guez	39	CALL nf95_inq_varid(ncid, 'ap', varid)
203			CALL nf95_put_var(ncid, varid, ap)
204	guez	18
205	guez	39	CALL nf95_inq_varid(ncid, 'bp', varid)
206			CALL nf95_put_var(ncid, varid, bp)
207	guez	18
208	guez	39	CALL nf95_inq_varid(ncid, 'presnivs', varid)
209			CALL nf95_put_var(ncid, varid, presnivs)
210	guez	18
211	guez	39	CALL nf95_inq_varid(ncid, 'cu', varid)
212			CALL nf95_put_var(ncid, varid, cu_2d)
213	guez	18
214	guez	39	CALL nf95_inq_varid(ncid, 'cv', varid)
215			CALL nf95_put_var(ncid, varid, cv_2d)
216	guez	18
217	guez	39	CALL nf95_inq_varid(ncid, 'aire', varid)
218			CALL nf95_put_var(ncid, varid, aire_2d)
219	guez	18
220	guez	39	CALL nf95_inq_varid(ncid, 'phisinit', varid)
221			CALL nf95_put_var(ncid, varid, phis)
222	guez	18
223	guez	39	CALL nf95_close(ncid) ! fermer le fichier
224	guez	18
225			PRINT *, 'iim, jjm, llm, iday_end', iim, jjm, llm, iday_end
226			PRINT *, 'rad, omeg, g, cpp, kappa', rad, omeg, g, cpp, kappa
227
228	guez	7	END SUBROUTINE dynredem0
229
230	guez	18	END MODULE dynredem0_m