trunk/dyn3d/dynredem0.f

MODULE dynredem0_m

  IMPLICIT NONE

CONTAINS

  SUBROUTINE dynredem0(fichnom, iday_end, phis)

    ! From dyn3d/dynredem.F, v 1.2 2004/06/22 11:45:30
    ! Ecriture du fichier de redémarrage au format NetCDF (initialisation)

    USE ioipsl, ONLY : ju2ymds, ymds2ju
    USE dimens_m, ONLY : iim, jjm, llm, nqmx
    USE paramet_m, ONLY : iip1, jjp1, llmp1
    USE comconst, ONLY : cpp, daysec, dtvr, g, kappa, omeg, rad
    USE comvert, ONLY : ap, bp, nivsig, nivsigs, pa, preff, presnivs
    USE logic, ONLY : fxyhypb, ysinus
    USE comgeom, ONLY : aire_2d, cu_2d, cv_2d, rlatu, rlatv, rlonu, rlonv
    USE serre, ONLY : clat, clon, dzoomx, dzoomy, grossismx, grossismy, &
         taux, tauy
    USE temps, ONLY : annee_ref, day_ref, itaufin, itau_dyn
    USE ener, ONLY : ang0, etot0, ptot0, stot0, ztot0
    USE iniadvtrac_m, ONLY : tname, ttext
    USE netcdf95, ONLY : nf95_close, nf95_create, nf95_def_dim, &
         nf95_def_var, nf95_enddef, nf95_inq_varid, nf95_put_att, &
         nf95_put_var
    USE netcdf, ONLY : nf90_clobber, nf90_float, nf90_global, &
         nf90_unlimited

    CHARACTER (len=*), INTENT (IN) :: fichnom
    INTEGER, INTENT (IN) :: iday_end
    REAL, INTENT (IN) :: phis(:, :)

    !   Local:

    INTEGER :: iq, l
    INTEGER :: length
    PARAMETER (length=100)
    REAL :: tab_cntrl(length) ! tableau des parametres du run

    !   Variables locales pour NetCDF:

    INTEGER :: dims2(2), dims3(3), dims4(4)
    INTEGER :: idim_index
    INTEGER :: idim_rlonu, idim_rlonv, idim_rlatu, idim_rlatv
    INTEGER :: idim_s, idim_sig
    INTEGER :: idim_tim
    INTEGER :: nid, nvarid

    REAL :: zjulian, hours
    INTEGER :: yyears0, jjour0, mmois0
    CHARACTER (len=30) :: unites

    !-----------------------------------------------------------------------

    PRINT *, 'Call sequence information: dynredem0'

    CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian)
    CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)

    DO l = 1, length
       tab_cntrl(l) = 0.
    END DO
    tab_cntrl(1) = real(iim)
    tab_cntrl(2) = real(jjm)
    tab_cntrl(3) = real(llm)
    tab_cntrl(4) = real(day_ref)
    tab_cntrl(5) = real(annee_ref)
    tab_cntrl(6) = rad
    tab_cntrl(7) = omeg
    tab_cntrl(8) = g
    tab_cntrl(9) = cpp
    tab_cntrl(10) = kappa
    tab_cntrl(11) = daysec
    tab_cntrl(12) = dtvr
    tab_cntrl(13) = etot0
    tab_cntrl(14) = ptot0
    tab_cntrl(15) = ztot0
    tab_cntrl(16) = stot0
    tab_cntrl(17) = ang0
    tab_cntrl(18) = pa
    tab_cntrl(19) = preff

    ! Paramètres  pour le zoom :

    tab_cntrl(20) = clon
    tab_cntrl(21) = clat
    tab_cntrl(22) = grossismx
    tab_cntrl(23) = grossismy

    IF (fxyhypb) THEN
       tab_cntrl(24) = 1.
       tab_cntrl(25) = dzoomx
       tab_cntrl(26) = dzoomy
       tab_cntrl(27) = 0.
       tab_cntrl(28) = taux
       tab_cntrl(29) = tauy
    ELSE
       tab_cntrl(24) = 0.
       tab_cntrl(25) = dzoomx
       tab_cntrl(26) = dzoomy
       tab_cntrl(27) = 0.
       tab_cntrl(28) = 0.
       tab_cntrl(29) = 0.
       IF (ysinus) tab_cntrl(27) = 1.
    END IF

    tab_cntrl(30) = real(iday_end)
    tab_cntrl(31) = real(itau_dyn+itaufin)

    CALL nf95_create(fichnom, nf90_clobber, nid)
    CALL nf95_put_att(nid, nf90_global, 'title', &
         'Fichier de démarrage dynamique')

    ! Definir les dimensions du fichiers:

    CALL nf95_def_dim(nid, 'index', length, idim_index)
    CALL nf95_def_dim(nid, 'rlonu', iip1, idim_rlonu)
    CALL nf95_def_dim(nid, 'rlatu', jjp1, idim_rlatu)
    CALL nf95_def_dim(nid, 'rlonv', iip1, idim_rlonv)
    CALL nf95_def_dim(nid, 'rlatv', jjm, idim_rlatv)
    CALL nf95_def_dim(nid, 'sigs', llm, idim_s)
    CALL nf95_def_dim(nid, 'sig', llmp1, idim_sig)
    CALL nf95_def_dim(nid, 'temps', nf90_unlimited, idim_tim)

    ! Definir et enregistrer certains champs invariants:

    CALL nf95_def_var(nid, 'controle', nf90_float, idim_index, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Parametres de controle')

    CALL nf95_def_var(nid, 'rlonu', nf90_float, idim_rlonu, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Longitudes des points U')

    CALL nf95_def_var(nid, 'rlatu', nf90_float, idim_rlatu, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Latitudes des points U')

    CALL nf95_def_var(nid, 'rlonv', nf90_float, idim_rlonv, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Longitudes des points V')

    CALL nf95_def_var(nid, 'rlatv', nf90_float, idim_rlatv, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Latitudes des points V')

    CALL nf95_def_var(nid, 'nivsigs', nf90_float, idim_s, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Numero naturel des couches s')

    CALL nf95_def_var(nid, 'nivsig', nf90_float, idim_sig, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', &
         'Numero naturel des couches sigma')

    CALL nf95_def_var(nid, 'ap', nf90_float, idim_sig, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient A pour hybride')

    CALL nf95_def_var(nid, 'bp', nf90_float, idim_sig, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient B pour hybride')

    CALL nf95_def_var(nid, 'presnivs', nf90_float, idim_s, nvarid)

    ! Coefficients de passage cov. <-> contra. <--> naturel

    dims2(1) = idim_rlonu
    dims2(2) = idim_rlatu
    CALL nf95_def_var(nid, 'cu', nf90_float, dims2, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient de passage pour U')

    dims2(1) = idim_rlonv
    dims2(2) = idim_rlatv
    CALL nf95_def_var(nid, 'cv', nf90_float, dims2, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient de passage pour V')

    ! Aire de chaque maille:

    dims2(1) = idim_rlonv
    dims2(2) = idim_rlatu
    CALL nf95_def_var(nid, 'aire', nf90_float, dims2, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Aires de chaque maille')

    ! Geopentiel au sol:

    dims2(1) = idim_rlonv
    dims2(2) = idim_rlatu
    CALL nf95_def_var(nid, 'phisinit', nf90_float, dims2, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Geopotentiel au sol')

    ! Definir les variables pour pouvoir les enregistrer plus tard:

    CALL nf95_def_var(nid, 'temps', nf90_float, idim_tim, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Temps de simulation')
    WRITE (unites, 200) yyears0, mmois0, jjour0
200 FORMAT ('days since ', I4, '-', I2.2, '-', I2.2, ' 00:00:00')
    CALL nf95_put_att(nid, nvarid, 'units', unites)


    dims4(1) = idim_rlonu
    dims4(2) = idim_rlatu
    dims4(3) = idim_s
    dims4(4) = idim_tim
    CALL nf95_def_var(nid, 'ucov', nf90_float, dims4, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Vitesse U')

    dims4(1) = idim_rlonv
    dims4(2) = idim_rlatv
    dims4(3) = idim_s
    dims4(4) = idim_tim
    CALL nf95_def_var(nid, 'vcov', nf90_float, dims4, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Vitesse V')

    dims4(1) = idim_rlonv
    dims4(2) = idim_rlatu
    dims4(3) = idim_s
    dims4(4) = idim_tim
    CALL nf95_def_var(nid, 'teta', nf90_float, dims4, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Temperature')

    dims4(1) = idim_rlonv
    dims4(2) = idim_rlatu
    dims4(3) = idim_s
    dims4(4) = idim_tim
    DO iq = 1, nqmx
       CALL nf95_def_var(nid, tname(iq), nf90_float, dims4, nvarid)
       CALL nf95_put_att(nid, nvarid, 'title', ttext(iq))
    END DO

    dims4(1) = idim_rlonv
    dims4(2) = idim_rlatu
    dims4(3) = idim_s
    dims4(4) = idim_tim
    CALL nf95_def_var(nid, 'masse', nf90_float, dims4, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'C est quoi ?')

    dims3(1) = idim_rlonv
    dims3(2) = idim_rlatu
    dims3(3) = idim_tim
    CALL nf95_def_var(nid, 'ps', nf90_float, dims3, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Pression au sol')

    CALL nf95_enddef(nid)

    CALL nf95_inq_varid(nid, 'controle', nvarid)
    CALL nf95_put_var(nid, nvarid, tab_cntrl)

    CALL nf95_inq_varid(nid, 'rlonu', nvarid)
    CALL nf95_put_var(nid, nvarid, rlonu)

    CALL nf95_inq_varid(nid, 'rlatu', nvarid)
    CALL nf95_put_var(nid, nvarid, rlatu)

    CALL nf95_inq_varid(nid, 'rlonv', nvarid)
    CALL nf95_put_var(nid, nvarid, rlonv)

    CALL nf95_inq_varid(nid, 'rlatv', nvarid)
    CALL nf95_put_var(nid, nvarid, rlatv)

    CALL nf95_inq_varid(nid, 'nivsigs', nvarid)
    CALL nf95_put_var(nid, nvarid, nivsigs)

    CALL nf95_inq_varid(nid, 'nivsig', nvarid)
    CALL nf95_put_var(nid, nvarid, nivsig)

    CALL nf95_inq_varid(nid, 'ap', nvarid)
    CALL nf95_put_var(nid, nvarid, ap)

    CALL nf95_inq_varid(nid, 'bp', nvarid)
    CALL nf95_put_var(nid, nvarid, bp)

    CALL nf95_inq_varid(nid, 'presnivs', nvarid)
    CALL nf95_put_var(nid, nvarid, presnivs)

    CALL nf95_inq_varid(nid, 'cu', nvarid)
    CALL nf95_put_var(nid, nvarid, cu_2d)

    CALL nf95_inq_varid(nid, 'cv', nvarid)
    CALL nf95_put_var(nid, nvarid, cv_2d)

    CALL nf95_inq_varid(nid, 'aire', nvarid)
    CALL nf95_put_var(nid, nvarid, aire_2d)

    CALL nf95_inq_varid(nid, 'phisinit', nvarid)
    CALL nf95_put_var(nid, nvarid, phis)

    CALL nf95_close(nid) ! fermer le fichier

    PRINT *, 'iim, jjm, llm, iday_end', iim, jjm, llm, iday_end
    PRINT *, 'rad, omeg, g, cpp, kappa', rad, omeg, g, cpp, kappa

  END SUBROUTINE dynredem0

END MODULE dynredem0_m
1	guez	18	MODULE dynredem0_m
2	guez	3
3	guez	7	IMPLICIT NONE
4	guez	3
5	guez	18	CONTAINS
6	guez	3
7	guez	7	SUBROUTINE dynredem0(fichnom, iday_end, phis)
8	guez	3
9	guez	7	! From dyn3d/dynredem.F, v 1.2 2004/06/22 11:45:30
10			! Ecriture du fichier de redémarrage au format NetCDF (initialisation)
11	guez	3
12	guez	18	USE ioipsl, ONLY : ju2ymds, ymds2ju
13			USE dimens_m, ONLY : iim, jjm, llm, nqmx
14			USE paramet_m, ONLY : iip1, jjp1, llmp1
15			USE comconst, ONLY : cpp, daysec, dtvr, g, kappa, omeg, rad
16			USE comvert, ONLY : ap, bp, nivsig, nivsigs, pa, preff, presnivs
17			USE logic, ONLY : fxyhypb, ysinus
18			USE comgeom, ONLY : aire_2d, cu_2d, cv_2d, rlatu, rlatv, rlonu, rlonv
19			USE serre, ONLY : clat, clon, dzoomx, dzoomy, grossismx, grossismy, &
20			taux, tauy
21			USE temps, ONLY : annee_ref, day_ref, itaufin, itau_dyn
22			USE ener, ONLY : ang0, etot0, ptot0, stot0, ztot0
23			USE iniadvtrac_m, ONLY : tname, ttext
24			USE netcdf95, ONLY : nf95_close, nf95_create, nf95_def_dim, &
25			nf95_def_var, nf95_enddef, nf95_inq_varid, nf95_put_att, &
26			nf95_put_var
27			USE netcdf, ONLY : nf90_clobber, nf90_float, nf90_global, &
28			nf90_unlimited
29	guez	5
30	guez	18	CHARACTER (len=*), INTENT (IN) :: fichnom
31			INTEGER, INTENT (IN) :: iday_end
32			REAL, INTENT (IN) :: phis(:, :)
33	guez	5
34	guez	7	! Local:
35	guez	3
36	guez	18	INTEGER :: iq, l
37			INTEGER :: length
38			PARAMETER (length=100)
39			REAL :: tab_cntrl(length) ! tableau des parametres du run
40	guez	5
41	guez	7	! Variables locales pour NetCDF:
42	guez	3
43	guez	18	INTEGER :: dims2(2), dims3(3), dims4(4)
44			INTEGER :: idim_index
45			INTEGER :: idim_rlonu, idim_rlonv, idim_rlatu, idim_rlatv
46			INTEGER :: idim_s, idim_sig
47			INTEGER :: idim_tim
48			INTEGER :: nid, nvarid
49	guez	3
50	guez	18	REAL :: zjulian, hours
51			INTEGER :: yyears0, jjour0, mmois0
52			CHARACTER (len=30) :: unites
53	guez	3
54	guez	7	!-----------------------------------------------------------------------
55	guez	3
56	guez	18	PRINT *, 'Call sequence information: dynredem0'
57	guez	3
58	guez	18	CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian)
59			CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)
60	guez	5
61	guez	18	DO l = 1, length
62	guez	7	tab_cntrl(l) = 0.
63	guez	18	END DO
64			tab_cntrl(1) = real(iim)
65			tab_cntrl(2) = real(jjm)
66			tab_cntrl(3) = real(llm)
67			tab_cntrl(4) = real(day_ref)
68			tab_cntrl(5) = real(annee_ref)
69			tab_cntrl(6) = rad
70			tab_cntrl(7) = omeg
71			tab_cntrl(8) = g
72			tab_cntrl(9) = cpp
73	guez	7	tab_cntrl(10) = kappa
74			tab_cntrl(11) = daysec
75			tab_cntrl(12) = dtvr
76			tab_cntrl(13) = etot0
77			tab_cntrl(14) = ptot0
78			tab_cntrl(15) = ztot0
79			tab_cntrl(16) = stot0
80			tab_cntrl(17) = ang0
81			tab_cntrl(18) = pa
82			tab_cntrl(19) = preff
83	guez	5
84	guez	7	! Paramètres pour le zoom :
85	guez	3
86	guez	18	tab_cntrl(20) = clon
87			tab_cntrl(21) = clat
88			tab_cntrl(22) = grossismx
89			tab_cntrl(23) = grossismy
90	guez	5
91	guez	18	IF (fxyhypb) THEN
92	guez	7	tab_cntrl(24) = 1.
93			tab_cntrl(25) = dzoomx
94			tab_cntrl(26) = dzoomy
95			tab_cntrl(27) = 0.
96			tab_cntrl(28) = taux
97			tab_cntrl(29) = tauy
98			ELSE
99			tab_cntrl(24) = 0.
100			tab_cntrl(25) = dzoomx
101			tab_cntrl(26) = dzoomy
102			tab_cntrl(27) = 0.
103			tab_cntrl(28) = 0.
104			tab_cntrl(29) = 0.
105	guez	18	IF (ysinus) tab_cntrl(27) = 1.
106			END IF
107	guez	5
108	guez	18	tab_cntrl(30) = real(iday_end)
109			tab_cntrl(31) = real(itau_dyn+itaufin)
110	guez	5
111	guez	18	CALL nf95_create(fichnom, nf90_clobber, nid)
112			CALL nf95_put_att(nid, nf90_global, 'title', &
113			'Fichier de démarrage dynamique')
114	guez	5
115	guez	7	! Definir les dimensions du fichiers:
116	guez	5
117	guez	18	CALL nf95_def_dim(nid, 'index', length, idim_index)
118			CALL nf95_def_dim(nid, 'rlonu', iip1, idim_rlonu)
119			CALL nf95_def_dim(nid, 'rlatu', jjp1, idim_rlatu)
120			CALL nf95_def_dim(nid, 'rlonv', iip1, idim_rlonv)
121			CALL nf95_def_dim(nid, 'rlatv', jjm, idim_rlatv)
122			CALL nf95_def_dim(nid, 'sigs', llm, idim_s)
123			CALL nf95_def_dim(nid, 'sig', llmp1, idim_sig)
124			CALL nf95_def_dim(nid, 'temps', nf90_unlimited, idim_tim)
125	guez	5
126	guez	7	! Definir et enregistrer certains champs invariants:
127	guez	5
128	guez	18	CALL nf95_def_var(nid, 'controle', nf90_float, idim_index, nvarid)
129			CALL nf95_put_att(nid, nvarid, 'title', 'Parametres de controle')
130	guez	5
131	guez	18	CALL nf95_def_var(nid, 'rlonu', nf90_float, idim_rlonu, nvarid)
132			CALL nf95_put_att(nid, nvarid, 'title', 'Longitudes des points U')
133	guez	5
134	guez	18	CALL nf95_def_var(nid, 'rlatu', nf90_float, idim_rlatu, nvarid)
135			CALL nf95_put_att(nid, nvarid, 'title', 'Latitudes des points U')
136	guez	5
137	guez	18	CALL nf95_def_var(nid, 'rlonv', nf90_float, idim_rlonv, nvarid)
138			CALL nf95_put_att(nid, nvarid, 'title', 'Longitudes des points V')
139	guez	5
140	guez	18	CALL nf95_def_var(nid, 'rlatv', nf90_float, idim_rlatv, nvarid)
141			CALL nf95_put_att(nid, nvarid, 'title', 'Latitudes des points V')
142	guez	5
143	guez	18	CALL nf95_def_var(nid, 'nivsigs', nf90_float, idim_s, nvarid)
144			CALL nf95_put_att(nid, nvarid, 'title', 'Numero naturel des couches s')
145	guez	5
146	guez	18	CALL nf95_def_var(nid, 'nivsig', nf90_float, idim_sig, nvarid)
147			CALL nf95_put_att(nid, nvarid, 'title', &
148			'Numero naturel des couches sigma')
149	guez	5
150	guez	18	CALL nf95_def_var(nid, 'ap', nf90_float, idim_sig, nvarid)
151			CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient A pour hybride')
152	guez	5
153	guez	18	CALL nf95_def_var(nid, 'bp', nf90_float, idim_sig, nvarid)
154			CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient B pour hybride')
155	guez	5
156	guez	18	CALL nf95_def_var(nid, 'presnivs', nf90_float, idim_s, nvarid)
157	guez	5
158	guez	7	! Coefficients de passage cov. <-> contra. <--> naturel
159	guez	5
160	guez	7	dims2(1) = idim_rlonu
161			dims2(2) = idim_rlatu
162	guez	18	CALL nf95_def_var(nid, 'cu', nf90_float, dims2, nvarid)
163			CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient de passage pour U')
164	guez	5
165	guez	7	dims2(1) = idim_rlonv
166			dims2(2) = idim_rlatv
167	guez	18	CALL nf95_def_var(nid, 'cv', nf90_float, dims2, nvarid)
168			CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient de passage pour V')
169	guez	5
170	guez	7	! Aire de chaque maille:
171	guez	5
172	guez	7	dims2(1) = idim_rlonv
173			dims2(2) = idim_rlatu
174	guez	18	CALL nf95_def_var(nid, 'aire', nf90_float, dims2, nvarid)
175			CALL nf95_put_att(nid, nvarid, 'title', 'Aires de chaque maille')
176	guez	5
177	guez	7	! Geopentiel au sol:
178	guez	5
179	guez	7	dims2(1) = idim_rlonv
180			dims2(2) = idim_rlatu
181	guez	18	CALL nf95_def_var(nid, 'phisinit', nf90_float, dims2, nvarid)
182			CALL nf95_put_att(nid, nvarid, 'title', 'Geopotentiel au sol')
183	guez	5
184	guez	7	! Definir les variables pour pouvoir les enregistrer plus tard:
185	guez	3
186	guez	18	CALL nf95_def_var(nid, 'temps', nf90_float, idim_tim, nvarid)
187			CALL nf95_put_att(nid, nvarid, 'title', 'Temps de simulation')
188			WRITE (unites, 200) yyears0, mmois0, jjour0
189			200 FORMAT ('days since ', I4, '-', I2.2, '-', I2.2, ' 00:00:00')
190			CALL nf95_put_att(nid, nvarid, 'units', unites)
191	guez	7
192	guez	5
193	guez	7	dims4(1) = idim_rlonu
194			dims4(2) = idim_rlatu
195			dims4(3) = idim_s
196			dims4(4) = idim_tim
197	guez	18	CALL nf95_def_var(nid, 'ucov', nf90_float, dims4, nvarid)
198			CALL nf95_put_att(nid, nvarid, 'title', 'Vitesse U')
199	guez	5
200	guez	7	dims4(1) = idim_rlonv
201			dims4(2) = idim_rlatv
202			dims4(3) = idim_s
203			dims4(4) = idim_tim
204	guez	18	CALL nf95_def_var(nid, 'vcov', nf90_float, dims4, nvarid)
205			CALL nf95_put_att(nid, nvarid, 'title', 'Vitesse V')
206	guez	5
207	guez	7	dims4(1) = idim_rlonv
208			dims4(2) = idim_rlatu
209			dims4(3) = idim_s
210			dims4(4) = idim_tim
211	guez	18	CALL nf95_def_var(nid, 'teta', nf90_float, dims4, nvarid)
212			CALL nf95_put_att(nid, nvarid, 'title', 'Temperature')
213	guez	5
214	guez	7	dims4(1) = idim_rlonv
215			dims4(2) = idim_rlatu
216			dims4(3) = idim_s
217			dims4(4) = idim_tim
218	guez	18	DO iq = 1, nqmx
219			CALL nf95_def_var(nid, tname(iq), nf90_float, dims4, nvarid)
220			CALL nf95_put_att(nid, nvarid, 'title', ttext(iq))
221			END DO
222	guez	5
223	guez	7	dims4(1) = idim_rlonv
224			dims4(2) = idim_rlatu
225			dims4(3) = idim_s
226			dims4(4) = idim_tim
227	guez	18	CALL nf95_def_var(nid, 'masse', nf90_float, dims4, nvarid)
228			CALL nf95_put_att(nid, nvarid, 'title', 'C est quoi ?')
229	guez	5
230	guez	7	dims3(1) = idim_rlonv
231			dims3(2) = idim_rlatu
232			dims3(3) = idim_tim
233	guez	18	CALL nf95_def_var(nid, 'ps', nf90_float, dims3, nvarid)
234			CALL nf95_put_att(nid, nvarid, 'title', 'Pression au sol')
235	guez	5
236	guez	18	CALL nf95_enddef(nid)
237	guez	3
238	guez	18	CALL nf95_inq_varid(nid, 'controle', nvarid)
239			CALL nf95_put_var(nid, nvarid, tab_cntrl)
240	guez	3
241	guez	18	CALL nf95_inq_varid(nid, 'rlonu', nvarid)
242			CALL nf95_put_var(nid, nvarid, rlonu)
243
244			CALL nf95_inq_varid(nid, 'rlatu', nvarid)
245			CALL nf95_put_var(nid, nvarid, rlatu)
246
247			CALL nf95_inq_varid(nid, 'rlonv', nvarid)
248			CALL nf95_put_var(nid, nvarid, rlonv)
249
250			CALL nf95_inq_varid(nid, 'rlatv', nvarid)
251			CALL nf95_put_var(nid, nvarid, rlatv)
252
253			CALL nf95_inq_varid(nid, 'nivsigs', nvarid)
254			CALL nf95_put_var(nid, nvarid, nivsigs)
255
256			CALL nf95_inq_varid(nid, 'nivsig', nvarid)
257			CALL nf95_put_var(nid, nvarid, nivsig)
258
259			CALL nf95_inq_varid(nid, 'ap', nvarid)
260			CALL nf95_put_var(nid, nvarid, ap)
261
262			CALL nf95_inq_varid(nid, 'bp', nvarid)
263			CALL nf95_put_var(nid, nvarid, bp)
264
265			CALL nf95_inq_varid(nid, 'presnivs', nvarid)
266			CALL nf95_put_var(nid, nvarid, presnivs)
267
268			CALL nf95_inq_varid(nid, 'cu', nvarid)
269			CALL nf95_put_var(nid, nvarid, cu_2d)
270
271			CALL nf95_inq_varid(nid, 'cv', nvarid)
272			CALL nf95_put_var(nid, nvarid, cv_2d)
273
274			CALL nf95_inq_varid(nid, 'aire', nvarid)
275			CALL nf95_put_var(nid, nvarid, aire_2d)
276
277			CALL nf95_inq_varid(nid, 'phisinit', nvarid)
278			CALL nf95_put_var(nid, nvarid, phis)
279
280			CALL nf95_close(nid) ! fermer le fichier
281
282			PRINT *, 'iim, jjm, llm, iday_end', iim, jjm, llm, iday_end
283			PRINT *, 'rad, omeg, g, cpp, kappa', rad, omeg, g, cpp, kappa
284
285	guez	7	END SUBROUTINE dynredem0
286
287	guez	18	END MODULE dynredem0_m