trunk/dyn3d/dynredem0.f

MODULE dynredem0_m

  IMPLICIT NONE

CONTAINS

  SUBROUTINE dynredem0(fichnom, iday_end, phis)

    ! From dyn3d/dynredem.F, v 1.2 2004/06/22 11:45:30
    ! Ecriture du fichier de redémarrage au format NetCDF (initialisation)

    USE ioipsl, ONLY : ju2ymds, ymds2ju
    USE dimens_m, ONLY : iim, jjm, llm, nqmx
    USE paramet_m, ONLY : iip1, jjp1, llmp1
    USE comconst, ONLY : cpp, daysec, dtvr, g, kappa, omeg, rad
    USE comvert, ONLY : ap, bp, nivsig, nivsigs, pa, preff, presnivs
    USE logic, ONLY : fxyhypb, ysinus
    USE comgeom, ONLY : aire_2d, cu_2d, cv_2d, rlatu, rlatv, rlonu, rlonv
    USE serre, ONLY : clat, clon, dzoomx, dzoomy, grossismx, grossismy, &
         taux, tauy
    USE temps, ONLY : annee_ref, day_ref, itaufin, itau_dyn
    USE ener, ONLY : ang0, etot0, ptot0, stot0, ztot0
    USE iniadvtrac_m, ONLY : tname, ttext
    USE netcdf95, ONLY : nf95_close, nf95_create, nf95_def_dim, &
         nf95_def_var, nf95_enddef, nf95_inq_varid, nf95_put_att, &
         nf95_put_var
    USE netcdf, ONLY : nf90_clobber, nf90_float, nf90_global, &
         nf90_unlimited

    CHARACTER (len=*), INTENT (IN) :: fichnom
    INTEGER, INTENT (IN) :: iday_end
    REAL, INTENT (IN) :: phis(:, :)

    !   Local:

    INTEGER :: iq, l
    INTEGER, PARAMETER:: length = 100
    REAL :: tab_cntrl(length) ! tableau des parametres du run

    !   Variables locales pour NetCDF:

    INTEGER :: dims2(2), dims3(3), dims4(4)
    INTEGER :: idim_index
    INTEGER :: idim_rlonu, idim_rlonv, idim_rlatu, idim_rlatv
    INTEGER :: idim_s, idim_sig
    INTEGER :: idim_tim
    INTEGER :: nid, nvarid

    REAL :: zjulian, hours
    INTEGER :: yyears0, jjour0, mmois0
    CHARACTER (len=30) :: unites

    !-----------------------------------------------------------------------

    PRINT *, 'Call sequence information: dynredem0'

    CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian)
    CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)

    DO l = 1, length
       tab_cntrl(l) = 0.
    END DO
    tab_cntrl(1) = real(iim)
    tab_cntrl(2) = real(jjm)
    tab_cntrl(3) = real(llm)
    tab_cntrl(4) = real(day_ref)
    tab_cntrl(5) = real(annee_ref)
    tab_cntrl(6) = rad
    tab_cntrl(7) = omeg
    tab_cntrl(8) = g
    tab_cntrl(9) = cpp
    tab_cntrl(10) = kappa
    tab_cntrl(11) = daysec
    tab_cntrl(12) = dtvr
    tab_cntrl(13) = etot0
    tab_cntrl(14) = ptot0
    tab_cntrl(15) = ztot0
    tab_cntrl(16) = stot0
    tab_cntrl(17) = ang0
    tab_cntrl(18) = pa
    tab_cntrl(19) = preff

    ! Paramètres  pour le zoom :

    tab_cntrl(20) = clon
    tab_cntrl(21) = clat
    tab_cntrl(22) = grossismx
    tab_cntrl(23) = grossismy

    IF (fxyhypb) THEN
       tab_cntrl(24) = 1.
       tab_cntrl(25) = dzoomx
       tab_cntrl(26) = dzoomy
       tab_cntrl(27) = 0.
       tab_cntrl(28) = taux
       tab_cntrl(29) = tauy
    ELSE
       tab_cntrl(24) = 0.
       tab_cntrl(25) = dzoomx
       tab_cntrl(26) = dzoomy
       tab_cntrl(27) = 0.
       tab_cntrl(28) = 0.
       tab_cntrl(29) = 0.
       IF (ysinus) tab_cntrl(27) = 1.
    END IF

    tab_cntrl(30) = real(iday_end)
    tab_cntrl(31) = real(itau_dyn+itaufin)

    CALL nf95_create(fichnom, nf90_clobber, nid)
    CALL nf95_put_att(nid, nf90_global, 'title', &
         'Fichier de démarrage dynamique')

    ! Definir les dimensions du fichiers:

    CALL nf95_def_dim(nid, 'index', length, idim_index)
    CALL nf95_def_dim(nid, 'rlonu', iip1, idim_rlonu)
    CALL nf95_def_dim(nid, 'rlatu', jjp1, idim_rlatu)
    CALL nf95_def_dim(nid, 'rlonv', iip1, idim_rlonv)
    CALL nf95_def_dim(nid, 'rlatv', jjm, idim_rlatv)
    CALL nf95_def_dim(nid, 'sigs', llm, idim_s)
    CALL nf95_def_dim(nid, 'sig', llmp1, idim_sig)
    CALL nf95_def_dim(nid, 'temps', nf90_unlimited, idim_tim)

    ! Definir et enregistrer certains champs invariants:

    CALL nf95_def_var(nid, 'controle', nf90_float, idim_index, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Parametres de controle')

    CALL nf95_def_var(nid, 'rlonu', nf90_float, idim_rlonu, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Longitudes des points U')

    CALL nf95_def_var(nid, 'rlatu', nf90_float, idim_rlatu, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Latitudes des points U')

    CALL nf95_def_var(nid, 'rlonv', nf90_float, idim_rlonv, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Longitudes des points V')

    CALL nf95_def_var(nid, 'rlatv', nf90_float, idim_rlatv, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Latitudes des points V')

    CALL nf95_def_var(nid, 'nivsigs', nf90_float, idim_s, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Numero naturel des couches s')

    CALL nf95_def_var(nid, 'nivsig', nf90_float, idim_sig, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', &
         'Numero naturel des couches sigma')

    CALL nf95_def_var(nid, 'ap', nf90_float, idim_sig, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient A pour hybride')

    CALL nf95_def_var(nid, 'bp', nf90_float, idim_sig, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient B pour hybride')

    CALL nf95_def_var(nid, 'presnivs', nf90_float, idim_s, nvarid)

    ! Coefficients de passage cov. <-> contra. <--> naturel

    dims2(1) = idim_rlonu
    dims2(2) = idim_rlatu
    CALL nf95_def_var(nid, 'cu', nf90_float, dims2, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient de passage pour U')

    dims2(1) = idim_rlonv
    dims2(2) = idim_rlatv
    CALL nf95_def_var(nid, 'cv', nf90_float, dims2, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient de passage pour V')

    ! Aire de chaque maille:

    dims2(1) = idim_rlonv
    dims2(2) = idim_rlatu
    CALL nf95_def_var(nid, 'aire', nf90_float, dims2, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Aires de chaque maille')

    ! Geopentiel au sol:

    dims2(1) = idim_rlonv
    dims2(2) = idim_rlatu
    CALL nf95_def_var(nid, 'phisinit', nf90_float, dims2, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Geopotentiel au sol')

    ! Definir les variables pour pouvoir les enregistrer plus tard:

    CALL nf95_def_var(nid, 'temps', nf90_float, idim_tim, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Temps de simulation')
    WRITE (unites, 200) yyears0, mmois0, jjour0
200 FORMAT ('days since ', I4, '-', I2.2, '-', I2.2, ' 00:00:00')
    CALL nf95_put_att(nid, nvarid, 'units', unites)


    dims4(1) = idim_rlonu
    dims4(2) = idim_rlatu
    dims4(3) = idim_s
    dims4(4) = idim_tim
    CALL nf95_def_var(nid, 'ucov', nf90_float, dims4, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Vitesse U')

    dims4(1) = idim_rlonv
    dims4(2) = idim_rlatv
    dims4(3) = idim_s
    dims4(4) = idim_tim
    CALL nf95_def_var(nid, 'vcov', nf90_float, dims4, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Vitesse V')

    dims4(1) = idim_rlonv
    dims4(2) = idim_rlatu
    dims4(3) = idim_s
    dims4(4) = idim_tim
    CALL nf95_def_var(nid, 'teta', nf90_float, dims4, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Temperature')

    dims4(1) = idim_rlonv
    dims4(2) = idim_rlatu
    dims4(3) = idim_s
    dims4(4) = idim_tim
    DO iq = 1, nqmx
       CALL nf95_def_var(nid, tname(iq), nf90_float, dims4, nvarid)
       CALL nf95_put_att(nid, nvarid, 'title', ttext(iq))
    END DO

    dims4(1) = idim_rlonv
    dims4(2) = idim_rlatu
    dims4(3) = idim_s
    dims4(4) = idim_tim
    CALL nf95_def_var(nid, 'masse', nf90_float, dims4, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'C est quoi ?')

    dims3(1) = idim_rlonv
    dims3(2) = idim_rlatu
    dims3(3) = idim_tim
    CALL nf95_def_var(nid, 'ps', nf90_float, dims3, nvarid)
    CALL nf95_put_att(nid, nvarid, 'title', 'Pression au sol')

    CALL nf95_enddef(nid)

    CALL nf95_inq_varid(nid, 'controle', nvarid)
    CALL nf95_put_var(nid, nvarid, tab_cntrl)

    CALL nf95_inq_varid(nid, 'rlonu', nvarid)
    CALL nf95_put_var(nid, nvarid, rlonu)

    CALL nf95_inq_varid(nid, 'rlatu', nvarid)
    CALL nf95_put_var(nid, nvarid, rlatu)

    CALL nf95_inq_varid(nid, 'rlonv', nvarid)
    CALL nf95_put_var(nid, nvarid, rlonv)

    CALL nf95_inq_varid(nid, 'rlatv', nvarid)
    CALL nf95_put_var(nid, nvarid, rlatv)

    CALL nf95_inq_varid(nid, 'nivsigs', nvarid)
    CALL nf95_put_var(nid, nvarid, nivsigs)

    CALL nf95_inq_varid(nid, 'nivsig', nvarid)
    CALL nf95_put_var(nid, nvarid, nivsig)

    CALL nf95_inq_varid(nid, 'ap', nvarid)
    CALL nf95_put_var(nid, nvarid, ap)

    CALL nf95_inq_varid(nid, 'bp', nvarid)
    CALL nf95_put_var(nid, nvarid, bp)

    CALL nf95_inq_varid(nid, 'presnivs', nvarid)
    CALL nf95_put_var(nid, nvarid, presnivs)

    CALL nf95_inq_varid(nid, 'cu', nvarid)
    CALL nf95_put_var(nid, nvarid, cu_2d)

    CALL nf95_inq_varid(nid, 'cv', nvarid)
    CALL nf95_put_var(nid, nvarid, cv_2d)

    CALL nf95_inq_varid(nid, 'aire', nvarid)
    CALL nf95_put_var(nid, nvarid, aire_2d)

    CALL nf95_inq_varid(nid, 'phisinit', nvarid)
    CALL nf95_put_var(nid, nvarid, phis)

    CALL nf95_close(nid) ! fermer le fichier

    PRINT *, 'iim, jjm, llm, iday_end', iim, jjm, llm, iday_end
    PRINT *, 'rad, omeg, g, cpp, kappa', rad, omeg, g, cpp, kappa

  END SUBROUTINE dynredem0

END MODULE dynredem0_m
1	guez	18	MODULE dynredem0_m
2	guez	3
3	guez	7	IMPLICIT NONE
4	guez	3
5	guez	18	CONTAINS
6	guez	3
7	guez	7	SUBROUTINE dynredem0(fichnom, iday_end, phis)
8	guez	3
9	guez	7	! From dyn3d/dynredem.F, v 1.2 2004/06/22 11:45:30
10			! Ecriture du fichier de redémarrage au format NetCDF (initialisation)
11	guez	3
12	guez	18	USE ioipsl, ONLY : ju2ymds, ymds2ju
13			USE dimens_m, ONLY : iim, jjm, llm, nqmx
14			USE paramet_m, ONLY : iip1, jjp1, llmp1
15			USE comconst, ONLY : cpp, daysec, dtvr, g, kappa, omeg, rad
16			USE comvert, ONLY : ap, bp, nivsig, nivsigs, pa, preff, presnivs
17			USE logic, ONLY : fxyhypb, ysinus
18			USE comgeom, ONLY : aire_2d, cu_2d, cv_2d, rlatu, rlatv, rlonu, rlonv
19			USE serre, ONLY : clat, clon, dzoomx, dzoomy, grossismx, grossismy, &
20			taux, tauy
21			USE temps, ONLY : annee_ref, day_ref, itaufin, itau_dyn
22			USE ener, ONLY : ang0, etot0, ptot0, stot0, ztot0
23			USE iniadvtrac_m, ONLY : tname, ttext
24			USE netcdf95, ONLY : nf95_close, nf95_create, nf95_def_dim, &
25			nf95_def_var, nf95_enddef, nf95_inq_varid, nf95_put_att, &
26			nf95_put_var
27			USE netcdf, ONLY : nf90_clobber, nf90_float, nf90_global, &
28			nf90_unlimited
29	guez	5
30	guez	18	CHARACTER (len=*), INTENT (IN) :: fichnom
31			INTEGER, INTENT (IN) :: iday_end
32			REAL, INTENT (IN) :: phis(:, :)
33	guez	5
34	guez	7	! Local:
35	guez	3
36	guez	18	INTEGER :: iq, l
37	guez	22	INTEGER, PARAMETER:: length = 100
38	guez	18	REAL :: tab_cntrl(length) ! tableau des parametres du run
39	guez	5
40	guez	7	! Variables locales pour NetCDF:
41	guez	3
42	guez	18	INTEGER :: dims2(2), dims3(3), dims4(4)
43			INTEGER :: idim_index
44			INTEGER :: idim_rlonu, idim_rlonv, idim_rlatu, idim_rlatv
45			INTEGER :: idim_s, idim_sig
46			INTEGER :: idim_tim
47			INTEGER :: nid, nvarid
48	guez	3
49	guez	18	REAL :: zjulian, hours
50			INTEGER :: yyears0, jjour0, mmois0
51			CHARACTER (len=30) :: unites
52	guez	3
53	guez	7	!-----------------------------------------------------------------------
54	guez	3
55	guez	18	PRINT *, 'Call sequence information: dynredem0'
56	guez	3
57	guez	18	CALL ymds2ju(annee_ref, 1, iday_end, 0.0, zjulian)
58			CALL ju2ymds(zjulian, yyears0, mmois0, jjour0, hours)
59	guez	5
60	guez	18	DO l = 1, length
61	guez	7	tab_cntrl(l) = 0.
62	guez	18	END DO
63			tab_cntrl(1) = real(iim)
64			tab_cntrl(2) = real(jjm)
65			tab_cntrl(3) = real(llm)
66			tab_cntrl(4) = real(day_ref)
67			tab_cntrl(5) = real(annee_ref)
68			tab_cntrl(6) = rad
69			tab_cntrl(7) = omeg
70			tab_cntrl(8) = g
71			tab_cntrl(9) = cpp
72	guez	7	tab_cntrl(10) = kappa
73			tab_cntrl(11) = daysec
74			tab_cntrl(12) = dtvr
75			tab_cntrl(13) = etot0
76			tab_cntrl(14) = ptot0
77			tab_cntrl(15) = ztot0
78			tab_cntrl(16) = stot0
79			tab_cntrl(17) = ang0
80			tab_cntrl(18) = pa
81			tab_cntrl(19) = preff
82	guez	5
83	guez	7	! Paramètres pour le zoom :
84	guez	3
85	guez	18	tab_cntrl(20) = clon
86			tab_cntrl(21) = clat
87			tab_cntrl(22) = grossismx
88			tab_cntrl(23) = grossismy
89	guez	5
90	guez	18	IF (fxyhypb) THEN
91	guez	7	tab_cntrl(24) = 1.
92			tab_cntrl(25) = dzoomx
93			tab_cntrl(26) = dzoomy
94			tab_cntrl(27) = 0.
95			tab_cntrl(28) = taux
96			tab_cntrl(29) = tauy
97			ELSE
98			tab_cntrl(24) = 0.
99			tab_cntrl(25) = dzoomx
100			tab_cntrl(26) = dzoomy
101			tab_cntrl(27) = 0.
102			tab_cntrl(28) = 0.
103			tab_cntrl(29) = 0.
104	guez	18	IF (ysinus) tab_cntrl(27) = 1.
105			END IF
106	guez	5
107	guez	18	tab_cntrl(30) = real(iday_end)
108			tab_cntrl(31) = real(itau_dyn+itaufin)
109	guez	5
110	guez	18	CALL nf95_create(fichnom, nf90_clobber, nid)
111			CALL nf95_put_att(nid, nf90_global, 'title', &
112			'Fichier de démarrage dynamique')
113	guez	5
114	guez	7	! Definir les dimensions du fichiers:
115	guez	5
116	guez	18	CALL nf95_def_dim(nid, 'index', length, idim_index)
117			CALL nf95_def_dim(nid, 'rlonu', iip1, idim_rlonu)
118			CALL nf95_def_dim(nid, 'rlatu', jjp1, idim_rlatu)
119			CALL nf95_def_dim(nid, 'rlonv', iip1, idim_rlonv)
120			CALL nf95_def_dim(nid, 'rlatv', jjm, idim_rlatv)
121			CALL nf95_def_dim(nid, 'sigs', llm, idim_s)
122			CALL nf95_def_dim(nid, 'sig', llmp1, idim_sig)
123			CALL nf95_def_dim(nid, 'temps', nf90_unlimited, idim_tim)
124	guez	5
125	guez	7	! Definir et enregistrer certains champs invariants:
126	guez	5
127	guez	18	CALL nf95_def_var(nid, 'controle', nf90_float, idim_index, nvarid)
128			CALL nf95_put_att(nid, nvarid, 'title', 'Parametres de controle')
129	guez	5
130	guez	18	CALL nf95_def_var(nid, 'rlonu', nf90_float, idim_rlonu, nvarid)
131			CALL nf95_put_att(nid, nvarid, 'title', 'Longitudes des points U')
132	guez	5
133	guez	18	CALL nf95_def_var(nid, 'rlatu', nf90_float, idim_rlatu, nvarid)
134			CALL nf95_put_att(nid, nvarid, 'title', 'Latitudes des points U')
135	guez	5
136	guez	18	CALL nf95_def_var(nid, 'rlonv', nf90_float, idim_rlonv, nvarid)
137			CALL nf95_put_att(nid, nvarid, 'title', 'Longitudes des points V')
138	guez	5
139	guez	18	CALL nf95_def_var(nid, 'rlatv', nf90_float, idim_rlatv, nvarid)
140			CALL nf95_put_att(nid, nvarid, 'title', 'Latitudes des points V')
141	guez	5
142	guez	18	CALL nf95_def_var(nid, 'nivsigs', nf90_float, idim_s, nvarid)
143			CALL nf95_put_att(nid, nvarid, 'title', 'Numero naturel des couches s')
144	guez	5
145	guez	18	CALL nf95_def_var(nid, 'nivsig', nf90_float, idim_sig, nvarid)
146			CALL nf95_put_att(nid, nvarid, 'title', &
147			'Numero naturel des couches sigma')
148	guez	5
149	guez	18	CALL nf95_def_var(nid, 'ap', nf90_float, idim_sig, nvarid)
150			CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient A pour hybride')
151	guez	5
152	guez	18	CALL nf95_def_var(nid, 'bp', nf90_float, idim_sig, nvarid)
153			CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient B pour hybride')
154	guez	5
155	guez	18	CALL nf95_def_var(nid, 'presnivs', nf90_float, idim_s, nvarid)
156	guez	5
157	guez	7	! Coefficients de passage cov. <-> contra. <--> naturel
158	guez	5
159	guez	7	dims2(1) = idim_rlonu
160			dims2(2) = idim_rlatu
161	guez	18	CALL nf95_def_var(nid, 'cu', nf90_float, dims2, nvarid)
162			CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient de passage pour U')
163	guez	5
164	guez	7	dims2(1) = idim_rlonv
165			dims2(2) = idim_rlatv
166	guez	18	CALL nf95_def_var(nid, 'cv', nf90_float, dims2, nvarid)
167			CALL nf95_put_att(nid, nvarid, 'title', 'Coefficient de passage pour V')
168	guez	5
169	guez	7	! Aire de chaque maille:
170	guez	5
171	guez	7	dims2(1) = idim_rlonv
172			dims2(2) = idim_rlatu
173	guez	18	CALL nf95_def_var(nid, 'aire', nf90_float, dims2, nvarid)
174			CALL nf95_put_att(nid, nvarid, 'title', 'Aires de chaque maille')
175	guez	5
176	guez	7	! Geopentiel au sol:
177	guez	5
178	guez	7	dims2(1) = idim_rlonv
179			dims2(2) = idim_rlatu
180	guez	18	CALL nf95_def_var(nid, 'phisinit', nf90_float, dims2, nvarid)
181			CALL nf95_put_att(nid, nvarid, 'title', 'Geopotentiel au sol')
182	guez	5
183	guez	7	! Definir les variables pour pouvoir les enregistrer plus tard:
184	guez	3
185	guez	18	CALL nf95_def_var(nid, 'temps', nf90_float, idim_tim, nvarid)
186			CALL nf95_put_att(nid, nvarid, 'title', 'Temps de simulation')
187			WRITE (unites, 200) yyears0, mmois0, jjour0
188			200 FORMAT ('days since ', I4, '-', I2.2, '-', I2.2, ' 00:00:00')
189			CALL nf95_put_att(nid, nvarid, 'units', unites)
190	guez	7
191	guez	5
192	guez	7	dims4(1) = idim_rlonu
193			dims4(2) = idim_rlatu
194			dims4(3) = idim_s
195			dims4(4) = idim_tim
196	guez	18	CALL nf95_def_var(nid, 'ucov', nf90_float, dims4, nvarid)
197			CALL nf95_put_att(nid, nvarid, 'title', 'Vitesse U')
198	guez	5
199	guez	7	dims4(1) = idim_rlonv
200			dims4(2) = idim_rlatv
201			dims4(3) = idim_s
202			dims4(4) = idim_tim
203	guez	18	CALL nf95_def_var(nid, 'vcov', nf90_float, dims4, nvarid)
204			CALL nf95_put_att(nid, nvarid, 'title', 'Vitesse V')
205	guez	5
206	guez	7	dims4(1) = idim_rlonv
207			dims4(2) = idim_rlatu
208			dims4(3) = idim_s
209			dims4(4) = idim_tim
210	guez	18	CALL nf95_def_var(nid, 'teta', nf90_float, dims4, nvarid)
211			CALL nf95_put_att(nid, nvarid, 'title', 'Temperature')
212	guez	5
213	guez	7	dims4(1) = idim_rlonv
214			dims4(2) = idim_rlatu
215			dims4(3) = idim_s
216			dims4(4) = idim_tim
217	guez	18	DO iq = 1, nqmx
218			CALL nf95_def_var(nid, tname(iq), nf90_float, dims4, nvarid)
219			CALL nf95_put_att(nid, nvarid, 'title', ttext(iq))
220			END DO
221	guez	5
222	guez	7	dims4(1) = idim_rlonv
223			dims4(2) = idim_rlatu
224			dims4(3) = idim_s
225			dims4(4) = idim_tim
226	guez	18	CALL nf95_def_var(nid, 'masse', nf90_float, dims4, nvarid)
227			CALL nf95_put_att(nid, nvarid, 'title', 'C est quoi ?')
228	guez	5
229	guez	7	dims3(1) = idim_rlonv
230			dims3(2) = idim_rlatu
231			dims3(3) = idim_tim
232	guez	18	CALL nf95_def_var(nid, 'ps', nf90_float, dims3, nvarid)
233			CALL nf95_put_att(nid, nvarid, 'title', 'Pression au sol')
234	guez	5
235	guez	18	CALL nf95_enddef(nid)
236	guez	3
237	guez	18	CALL nf95_inq_varid(nid, 'controle', nvarid)
238			CALL nf95_put_var(nid, nvarid, tab_cntrl)
239	guez	3
240	guez	18	CALL nf95_inq_varid(nid, 'rlonu', nvarid)
241			CALL nf95_put_var(nid, nvarid, rlonu)
242
243			CALL nf95_inq_varid(nid, 'rlatu', nvarid)
244			CALL nf95_put_var(nid, nvarid, rlatu)
245
246			CALL nf95_inq_varid(nid, 'rlonv', nvarid)
247			CALL nf95_put_var(nid, nvarid, rlonv)
248
249			CALL nf95_inq_varid(nid, 'rlatv', nvarid)
250			CALL nf95_put_var(nid, nvarid, rlatv)
251
252			CALL nf95_inq_varid(nid, 'nivsigs', nvarid)
253			CALL nf95_put_var(nid, nvarid, nivsigs)
254
255			CALL nf95_inq_varid(nid, 'nivsig', nvarid)
256			CALL nf95_put_var(nid, nvarid, nivsig)
257
258			CALL nf95_inq_varid(nid, 'ap', nvarid)
259			CALL nf95_put_var(nid, nvarid, ap)
260
261			CALL nf95_inq_varid(nid, 'bp', nvarid)
262			CALL nf95_put_var(nid, nvarid, bp)
263
264			CALL nf95_inq_varid(nid, 'presnivs', nvarid)
265			CALL nf95_put_var(nid, nvarid, presnivs)
266
267			CALL nf95_inq_varid(nid, 'cu', nvarid)
268			CALL nf95_put_var(nid, nvarid, cu_2d)
269
270			CALL nf95_inq_varid(nid, 'cv', nvarid)
271			CALL nf95_put_var(nid, nvarid, cv_2d)
272
273			CALL nf95_inq_varid(nid, 'aire', nvarid)
274			CALL nf95_put_var(nid, nvarid, aire_2d)
275
276			CALL nf95_inq_varid(nid, 'phisinit', nvarid)
277			CALL nf95_put_var(nid, nvarid, phis)
278
279			CALL nf95_close(nid) ! fermer le fichier
280
281			PRINT *, 'iim, jjm, llm, iday_end', iim, jjm, llm, iday_end
282			PRINT *, 'rad, omeg, g, cpp, kappa', rad, omeg, g, cpp, kappa
283
284	guez	7	END SUBROUTINE dynredem0
285
286	guez	18	END MODULE dynredem0_m