Parent Directory
| 
Revision Log
| Sticky Revision: |
Move Sources/* to root directory.
Just encapsulated SUBROUTINE vlsplt in a module and cleaned it. In procedure vlx, local variables dxqu and adxqu only need indices iip2:ip1jm. Otherwise, just cleaned vlx. Procedures dynredem0 and dynredem1 no longer have argument fichnom, they just operate on a file named "restart.nc". The programming guideline here is that gcm should not be more complex than it needs by itself, other programs (ce0l etc.) just have to adapt to gcm. So ce0l now creates files "restart.nc" and "restartphy.nc". In order to facilitate decentralizing the writing of "restartphy.nc", created a procedure phyredem0 out of phyredem. phyredem0 creates the NetCDF header of "restartphy.nc" while phyredem writes the NetCDF variables. As the global attribute itau_phy needs to be filled in phyredem0, at the beginnig of the run, we must compute its value instead of just using itap. So we have a dummy argument lmt_pas of phyredem0. Also, the ncid of "startphy.nc" is upgraded from local variable of phyetat0 to dummy argument. phyetat0 no longer closes "startphy.nc". Following the same decentralizing objective, the ncid of "restart.nc" is upgraded from local variable of dynredem0 to module variable of dynredem0_m. "restart.nc" is not closed at the end of dynredem0 nor opened at the beginning of dynredem1. In procedure etat0, instead of creating many vectors of size klon which will be filled with zeroes, just create one array null_array. In procedure phytrac, instead of writing trs(: 1) to a text file, write it to "restartphy.nc" (following LMDZ). This is better because now trs(: 1) is next to its coordinates. We can write to "restartphy.nc" from phytrac directly, and not add trs(: 1) to the long list of variables in physiq, thanks to the decentralizing of "restartphy.nc". In procedure phyetat0, we no longer write to standard output the minimum and maximum values of read arrays. It is ok to check input and abort on invalid values but just printing statistics on input seems too much useless computation and out of place clutter.
Sources inside, compilation outside.
Moved a call to writefield from guide to tau2alpha. (dxdys does not change with itau.) So dxdys does not need to be a module variable any longer. Other variables of modules tau2alpha_m downgraded to local variables of tau2alpha, since they were not used elsewhere. Procedures write_field[13]d and formcoord were never called. Could then remove int2str. Inline writefield_gen into writefield. CreateNewField takes an integer array argument instead of 3 scalar integers. CreateNewField now creates a number of dimensions adapted to the rank of the output field, instead of always 4 dimensions. Changed names of variables of module write_field: fieldid to ncid, fieldindex to record, fieldvarid to varid. In writefield_gen, if index == -1, no need to call GetFieldIndex again, we know that the result is nbfield. In guide, moved calls to writefield for some variables inside if first_call: those variables do not change with time. Removed ztau: computed only to be output, does not seem meaningful. Removed writefield for aire: does not change with time and is already in "grilles_gcm.nc".
Imported writefield from LMDZ. Close at the end of gcm the files which were created by writefiled (not done in LMDZ). Removed procedures for the output of Grads files. Removed calls to dump2d. In guide, replaced calls to wrgrads by calls to writefield. In vlspltqs, removed redundant programming of saturation pressure. Call foeew from module FCTTRE instead. Bug fix in interpre: size of w exceeding size of correponding actual argument wg in advtrac. In leapfrog, call guide until the end of the run, instead of six hours before the end. Bug fix in readsulfate_preind: type of arguments.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
No reason to call inidissip in ce0l. In inidissip, set random seed to 1 beacuse PGI compiler does not accept all zeros. dq was computed needlessly in caladvtrac. Arguments masse and dq of calfis not used. Replaced real*8 by double precision. Pass arrays with inverted order of vertical levels to conflx instead of creating local variables for this inside conflx.
Removed argument "pdteta" of "calfis", because it was not used. Created module "conf_guide_m", containing procedure "conf_guide". Moved module variables from "guide_m" to "conf_guide_m". In module "getparam", removed "ini_getparam" and "fin_getparam" from generic interface "getpar". Created module variables in "tau2alpha_m" to replace common "comdxdy".
"start_init_phys" is now called directly by "etat0" instead of through "start_init_dyn". "qsol_2d" is no longer a variable of module "start_init_phys_m", it is an argument of "start_init_phys". "start_init_dyn" now receives "tsol_2d" from "etat0". Split file "vlspltqs.f" into "vlspltqs.f90", "vlxqs.f90" and ""vlyqs.f90". In "start_init_orog", replaced calls to "flin*" by calls to NetCDF95.
"pi" comes from "nr_util". Removed subroutine "initialize" in module "comconst". Copied the content of "fxy_sin.h" into "fxysinus", instead of getting it from an "include" line. Removed file "fxy_sin.h". "ps" has rank 2 in "gcm" and "dynetat0". Assumed-shape for argument "q" of "integrd".
Split "stringop.f90" into single-procedure files. Gathered files in directory "IOIPSL/Stringop". Split "flincom.f90" into "flincom.f90" and "flinget.f90". Removed unused procedures from module "flincom". Removed unused argument "filename" of procedure "flinopen_nozoom". Removed unused files. Split "grid_change.f90" into "grid_change.f90" and "gr_phy_write_3d.f90". Removed unused procedures from modules "calendar", "ioipslmpp", "grid_atob", "gath_cpl" and "getincom". Removed unused procedures in files "ppm3d.f" and "thermcell.f". Split "mathelp.f90" into "mathelp.f90" and "mathop.f90". Removed unused variable "dpres" of module "comvert". Use argument "itau" instead of local variables "iadvtr" and "first" to control algorithm in procedure "fluxstokenc". Removed unused arguments of procedure "integrd". Removed useless computations at the end of procedure "leapfrog". Merged common block "matrfil" into module "parafilt".
Split "vlsplt.f" in single-procedure files. Gathered the files in directory "dyn3d/Vlsplt". Defined "pbarum(:, 1, :)" and "pbarum(:, jjm + 1, :)" in procedure "groupe".
Removed unused "diagedyn.f" and "undefSTD.f". In "etat0", the variable "dt" of module "temps" was defined from "landicered.nc", which was meaningless and useless. Replaced "dt" by a local trash variable. Removed variable "dt" from module "temps" and created instead a local variable of "leapfrog" and an argument of "integrd".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |