Parent Directory
| 
Revision Log
| Sticky Revision: |
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
Split "getincom.f90" into "getincom.f90" and "getincom2.f90". Split "nuage.f" into "nuage.f90", "diagcld1.f90" and "diagcld2.f90". Created module "chem" from included file "chem.h". Moved "YOEGWD.f90" to directory "Orography". In "physiq", for evaporation of water, "zlsdcp" was equal to "zlvdc". Removed useless variables.
LMDZE now uses library Jumble. Removed all calls to "flinget". Replaced calls to "flinget", "flininfo", "flinopen_nozoom" by calls to NetCDF95 and Jumble. Split file "cv_driver.f" into "cv_driver.f90", "cv_flag.f90" and "cv_thermo.f90". Bug fix: "QANCIEN" was read twice in "phyeytat0". In "physiq", initialization of "d_t", "d_u", "d_v" was useless.
Replaced calls to "flinget" by calls to "NetCDF95".
Split "thermcell.f" and "cv3_routines.f". Removed copies of files that are now in "L_util". Moved "mva9" and "diagetpq" to their own files. Unified variable names across procedures.
Removed procedure "psextbar". "psextbar" was called but the result of the call was not used.
Split file "histwrite.f90" into "histwrite.f90", "histwrite_real.f90" and "histvar_seq.f90". Extracted documentation from "psextbar.f" into "psextbar.txt" (out of SVN).
Removed argument "pdteta" of "calfis", because it was not used. Created module "conf_guide_m", containing procedure "conf_guide". Moved module variables from "guide_m" to "conf_guide_m". In module "getparam", removed "ini_getparam" and "fin_getparam" from generic interface "getpar". Created module variables in "tau2alpha_m" to replace common "comdxdy".
"start_init_phys" is now called directly by "etat0" instead of through "start_init_dyn". "qsol_2d" is no longer a variable of module "start_init_phys_m", it is an argument of "start_init_phys". "start_init_dyn" now receives "tsol_2d" from "etat0". Split file "vlspltqs.f" into "vlspltqs.f90", "vlxqs.f90" and ""vlyqs.f90". In "start_init_orog", replaced calls to "flin*" by calls to NetCDF95.
"alpha" useless, always 0, in "exner_hyb".
"pi" comes from "nr_util". Removed subroutine "initialize" in module "comconst". Copied the content of "fxy_sin.h" into "fxysinus", instead of getting it from an "include" line. Removed file "fxy_sin.h". "ps" has rank 2 in "gcm" and "dynetat0". Assumed-shape for argument "q" of "integrd".
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
Inlined procedure "pression". Split "guide.f90" into "guide.f90" and "tau2alpha.f90". Split "read_reanalyse.f" into single-procedure files in directory "Read_reanalyse". Useless copy of variables in "iniphysiq". Directly define module variables in "gcm" and remove procedure "iniphysiq". Added "pressure-altitude" in "test_disvert".
Now using the library "NR_util".
Split "ini_hist.f90" into single-procedure files. In "calfis" and "physiq", removed dummy argument "nq" since "nq" must be equal to "nqmx". In "calfis", renamed dummy argument "pq" to "q", same name as actual argument in "leapfrog". Renamed local variable "zqfi" to "qx", same name as dummy argument in "physiq". Removed arguments "itop_con" and "ibas_con" of "phytrac", which were not used.
Test namelist input in procedure "conf_gcm" rather than program unit "gcm". Compute "time" in procedure "sortvarc" rather than "leapfrog". Rewrote "leapfrog" with a single loop on "itau" instead of two nested loops on number of periodic matsuno-leapfrog cycles and leapfrog iterations.
Split "stringop.f90" into single-procedure files. Gathered files in directory "IOIPSL/Stringop". Split "flincom.f90" into "flincom.f90" and "flinget.f90". Removed unused procedures from module "flincom". Removed unused argument "filename" of procedure "flinopen_nozoom". Removed unused files. Split "grid_change.f90" into "grid_change.f90" and "gr_phy_write_3d.f90". Removed unused procedures from modules "calendar", "ioipslmpp", "grid_atob", "gath_cpl" and "getincom". Removed unused procedures in files "ppm3d.f" and "thermcell.f". Split "mathelp.f90" into "mathelp.f90" and "mathop.f90". Removed unused variable "dpres" of module "comvert". Use argument "itau" instead of local variables "iadvtr" and "first" to control algorithm in procedure "fluxstokenc". Removed unused arguments of procedure "integrd". Removed useless computations at the end of procedure "leapfrog". Merged common block "matrfil" into module "parafilt".
Split "vlsplt.f" in single-procedure files. Gathered the files in directory "dyn3d/Vlsplt". Defined "pbarum(:, 1, :)" and "pbarum(:, jjm + 1, :)" in procedure "groupe".
Imported Source files of the external library "IOIPSL_Lionel" into "libf/IOIPSL". Split "cray.f90" into "scopy.f90" and "ssum.f90". Rewrote "leapfrog" in order to have a clearer algorithmic structure.
Removed unused "diagedyn.f" and "undefSTD.f". In "etat0", the variable "dt" of module "temps" was defined from "landicered.nc", which was meaningless and useless. Replaced "dt" by a local trash variable. Removed variable "dt" from module "temps" and created instead a local variable of "leapfrog" and an argument of "integrd".
"dyn3d" and "filtrez" do not contain any included file so make rules have been updated. "comdissip.f90" was useless, removed it. "dynredem0" wrote undefined value in "controle(31)", that was overwritten by "dynredem1". Now "dynredem0" just writes 0 to "controle(31)". Removed arguments of "inidissip". "inidissip" now accesses the variables by use association. In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote undefined value to "controle(31)". Added argument "itau" of "dynredem1" to correct that. "itaufin" does not need to be a module variable (of "temps"), made it a local variable of "leapfrog". Removed calls to "diagedyn" from "leapfrog".
Moved variable "dtdiss" from module "comconst", variable "idissip" from module "conf_gcm_m" and all variables from module "comdissipn" to module "inidissip_m". "inidissip" creates file "inidissip.csv". "idissip" is no longer read from a namelist. Removed useless computation of "dtdiss" in procedure "iniconst".
Simplified "etat0_lim.sh" and "gcm.sh" because the full versions depended on personal arrangements for directories and machines. Translated included files into modules. Encapsulated procedures into modules. Moved variables from module "comgeom" to local variables of "inigeom". Deleted some unused variables in "comgeom". Moved variable "day_ini" from module "temps" to module "dynetat0_m". Removed useless test on variable "time" and useless "close" statement in procedure "leapfrog". Removed useless call to "inigeom" in procedure "limit".
Created directory "phylmd/Radlwsw". Split "radlwsw.f" in files containing a single procedure. Removed variable "itaufinp1" in "leapfrog".
Split "orografi.f": one file for each procedure. Put the created files in new directory "Orography". Removed argument "vcov" of procedure "sortvarc". Removed arguments "itau" and "time" of procedure "caldyn0". Removed arguments "itau", "time" and "vcov" of procedure "sortvarc0". Removed argument "time" of procedure "dynredem1". Removed NetCDF variable "temps" in files "start.nc" and "restart.nc", because its value is always 0. Removed argument "nq" of procedures "iniadvtrac" and "leapfrog". The number of "tracers read in "traceur.def" must now be equal to "nqmx", or "nqmx" must equal 4 if there is no file "traceur.def". Replaced variable "nq" by constant "nqmx" in "leapfrog". NetCDF variable for ozone field in "coefoz.nc" must now be called "tro3" instead of "r". Fixed bug in "zenang".
Superficial modifications
Deleted argument "presnivs" of "physiq", "ini_histhf", "ini_histhf3d", "ini_histday", "ini_histins", "ini_histrac", "phytrac". Access it from "comvert" instead. Replaced calls to NetCDF Fortran 77 interface by calls to Fortran 90 interface or to NetCDF95. Procedure "gr_phy_write_3d" now works with a variable of arbitrary size in the second dimension. Annotated use statements with "only" clause. Replaced calls to NetCDF interface version 2 by calls to Fortran 90 interface in "guide.f90" and "read_reanalyse.f". In "write_histrac", replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d" and "gr_phy_write_3d".
Inlined procedures "regr_pr_av" and "regr_pr_int" in "regr_pr_o3", "regr_pr_av_coefoz" and "regr_pr_int_coefoz".
In module "regr_pr", rewrote scanning of horizontal positions as a single set of loops, using a mask. Added some "intent" attributes. In "dynredem0", replaced calls to Fortran 77 interface of NetCDF by calls to NetCDF95. Removed calls to "nf_redef", regrouped all writing operations. In "dynredem1", replaced some calls to Fortran 77 interface of NetCDF by calls to Fortran 90 interface. Renamed variable "nqmax" to "nq_phys". In "physiq", if "nq >= 5" then "wo" is computed from the parameterization of "Cariolle".
Created rule for "compare_sampl_*" files in "Documentation/Manuel_LMDZE.texfol/Graphiques/GNUmakefile". Extracted "qcheck", "radiornpb", "minmaxqfi" into separate files. Read pressure coordinate of ozone coefficients once per run instead of every day. Added some "intent" attributes. Added argument "nq" to "ini_histday". Replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d". "Sigma_O3_Royer" is written to "histday.nc" only if "nq >= 4". Moved "ini_histrac" to module "ini_hist". Compute "zmasse" in "physiq", pass it to "phytrac". Removed computations of "pftsol*" and "ppsrf*" in "phytrac". Do not use variable "rg" from module "YOMCST" in "TLIFT".
-- Minor modification of input/output: Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1", "ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4" "mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from "histrac.nc". Variable "raz_date" of module "conf_gcm_m" has logical type instead of integer type. -- Should not change any result at run time: Modified calls to "IOIPSL_Lionel" procedures because the interfaces of these procedures have been simplified. Changed name of variable in module "start_init_orog_m": "masque" to "mask". Created a module containing procedure "phyredem". Removed arguments "punjours", "pdayref" and "ptimestep" of procedure "iniphysiq". Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created procedure "gr_phy_write_3d". Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev", "calcul_divers".
-- Minor change of behaviour: "etat0" does not compute "rugsrel" nor "radpas". Deleted arguments "radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of "phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In "physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program "etat0_lim" does not use "clesphys2". -- Minor modification of input/output: Created subroutine "read_clesphys2". Variables of "clesphys2" are read in "read_clesphys2" instead of "conf_gcm". "printflag" does not print variables of "clesphys2". -- Should not change any result at run time: References to module "numer_rec" instead of individual modules of "Numer_rec_Lionel". Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm", "leapfrog", "phyetat0". Deleted variable "clesphy0" in "gcm". "phyetat0" does not modify variables of "clesphys2". The program unit "gcm" does not modify "itau_phy". Added some "intent" attributes. "regr11_lint" does not call "polint".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
New variables "*_dir" in "g95.mk". Corrected some bugs: "etat0_lim" works, but not "gcm".
This revision is not in working order. Pending some moving of files. Important changes. In the program "etat0_lim": ozone coefficients from Mobidic are regridded in time instead of pressure ; consequences in "etat0". In the program "gcm", ozone coefficients from Mobidic are read once per day only for the current day and regridded in pressure ; consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and "regr_pr_comb_coefoz_m". NetCDF95 is a library and does not export NetCDF. New variables "nag_gl_options", "nag_fcalls_options" and "nag_cross_options" in "nag_tools.mk". "check_coefoz.jnl" rewritten entirely for new version of "coefoz_LMDZ.nc". Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk". Added some "intent" attributes in "calfis", "clmain", "clqh", "cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD", "nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind" and "undefSTD". In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of 1. "phis" has assumed shape in "dynredem0". Added module containing "dynredem0". Changed some calls with NetCDF Fortran 77 interface to calls with NetCDF95 interface. Replaced calls to "ssum" by calls to "sum" in "inigeom". In "make.sh", new option "-c" to change compiler. In "aaam_bud", argument "rjour" deleted. In "physiq": renamed some variables; deleted variable "xjour". In "phytrac": renamed some variables; new argument "lmt_pas".
Created module from included file parafilt. Converted caldyn0 to free format. Added a rule to create cross-references with NAG. Added optional attribute in iniadvtrac. Suppressed argument nq in dynredem0 and dynredem1, using nqmx instead. Replaced some NetCDF calls by netcdf95 calls in dynredem0. Added intent attribute in dynredem0 and dynredem1. Annotated use statements with only clause, in dynredem1. Suppressed variable nq and argument of iniadvtrac in etat0. Added test on nqmx in etat0.
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |