phylmd/Mobidic/regr_pr_o3.f90

module regr_pr_o3_m

  implicit none

contains

  subroutine regr_pr_o3(o3_mob_regr)

    ! "regr_pr_o3" stands for "regrid pressure ozone".
    ! This procedure reads Mobidic ozone mole fraction from
    ! "coefoz_LMDZ.nc" at the initial day and regrids it in pressure.
    ! Ozone mole fraction from "coefoz_LMDZ.nc" is a 2D latitude --
    ! pressure variable.
    ! The target horizontal LMDZ grid is the "scalar" grid: "rlonv", "rlatu".
    ! The target vertical LMDZ grid is the grid of layer boundaries.
    ! We assume that the input variable is already on the LMDZ "rlatu"
    ! latitude grid.
    ! The input variable does not depend on longitude, but the
    ! pressure at LMDZ layers does.
    ! Therefore, the values on the LMDZ grid do depend on longitude.
    ! Regridding is by averaging, assuming a step function.
    ! We assume that, in the input file, the pressure levels are in
    ! hPa and strictly increasing.

    use conf_gcm_m, only: dayref
    use dimens_m, only: iim, jjm, llm
    use netcdf95, only: nf95_open, nf95_close, nf95_inq_varid, handle_err, &
         nf95_get_coord
    use netcdf, only:  nf90_nowrite, nf90_get_var
    use numer_rec, only: assert
    use grid_change, only: dyn_phy
    use regr1_step_av_m, only: regr1_step_av
    use pressure_var, only: p3d

    real, intent(out):: o3_mob_regr(:, :, :) ! (iim + 1, jjm + 1, llm)
    ! (ozone mole fraction from Mobidic adapted to the LMDZ grid)
    ! ("o3_mob_regr(i, j, l)" is at longitude "rlonv(i)", latitude
    ! "rlatu(j)" and pressure level "pls(i, j, l)")

    ! Variables local to the procedure:

    real, pointer:: plev(:)
    ! (pressure levels of Mobidic data, in Pa, in strictly increasing order)

    real, allocatable:: press_in_edg(:)
    ! (edges of pressure intervals for Mobidic data, in Pa, in strictly
    ! increasing order)

    integer ncid, varid, ncerr ! for NetCDF
    integer n_plev ! number of pressure levels in Mobidic data
    integer i, j

    real, allocatable:: r_mob(:, :)! (jjm + 1, n_plev)
    ! (ozone mole fraction from Mobidic at day "dayref")
    ! (r_mob(j, k) is at latitude "rlatu(j)" and pressure level "plev(k)".)

    !------------------------------------------------------------

    print *, "Call sequence information: regr_pr_o3"
    call assert(shape(o3_mob_regr) == (/iim + 1, jjm + 1, llm/), "regr_pr_o3")

    call nf95_open("coefoz_LMDZ.nc", nf90_nowrite, ncid)

    call nf95_get_coord(ncid, "plev", plev)
    ! Convert from hPa to Pa because "regr_pr_av" requires so:
    plev = plev * 100.
    n_plev = size(plev)

    ! Compute edges of pressure intervals:
    allocate(press_in_edg(n_plev + 1))
    press_in_edg(1) = 0.
    ! We choose edges halfway in logarithm:
    forall (j = 2:n_plev) press_in_edg(j) = sqrt(plev(j - 1) * plev(j))
    press_in_edg(n_plev + 1) = huge(0.)
    ! (infinity, but any value guaranteed to be greater than the
    ! surface pressure would do)

    deallocate(plev) ! pointer

    call nf95_inq_varid(ncid, "r_Mob", varid)
    allocate(r_mob(jjm + 1, n_plev))

    ! Get data at the right day from the input file:
    ncerr = nf90_get_var(ncid, varid, r_mob, start=(/1, 1, dayref/))
    call handle_err("nf90_get_var r_Mob", ncerr)
    ! Latitudes are in increasing order in the input file while
    ! "rlatu" is in decreasing order so we need to invert order:
    r_mob = r_mob(jjm+1:1:-1, :)

    call nf95_close(ncid)

    ! Regrid in pressure by averaging a step function of pressure:
    do j = 1, jjm + 1
       do i = 1, iim
          if (dyn_phy(i, j)) then
             o3_mob_regr(i, j, llm:1:-1) &
                  = regr1_step_av(r_mob(j, :), press_in_edg, &
                  p3d(i, j, llm+1:1:-1))
             ! (invert order of indices because "p3d" is decreasing)
          end if
       end do
    end do

    ! Duplicate pole values on all longitudes:
    o3_mob_regr(2:, 1, :) = spread(o3_mob_regr(1, 1, :), dim=1, ncopies=iim)
    o3_mob_regr(2:, jjm + 1, :) &
         = spread(o3_mob_regr(1, jjm + 1, :), dim=1, ncopies=iim)

    ! Duplicate first longitude to last longitude:
    o3_mob_regr(iim + 1, 2:jjm, :) = o3_mob_regr(1, 2:jjm, :)

  end subroutine regr_pr_o3

end module regr_pr_o3_m
1	module regr_pr_o3_m
2
3	implicit none
4
5	contains
6
7	subroutine regr_pr_o3(o3_mob_regr)
8
9	! "regr_pr_o3" stands for "regrid pressure ozone".
10	! This procedure reads Mobidic ozone mole fraction from
11	! "coefoz_LMDZ.nc" at the initial day and regrids it in pressure.
12	! Ozone mole fraction from "coefoz_LMDZ.nc" is a 2D latitude --
13	! pressure variable.
14	! The target horizontal LMDZ grid is the "scalar" grid: "rlonv", "rlatu".
15	! The target vertical LMDZ grid is the grid of layer boundaries.
16	! We assume that the input variable is already on the LMDZ "rlatu"
17	! latitude grid.
18	! The input variable does not depend on longitude, but the
19	! pressure at LMDZ layers does.
20	! Therefore, the values on the LMDZ grid do depend on longitude.
21	! Regridding is by averaging, assuming a step function.
22	! We assume that, in the input file, the pressure levels are in
23	! hPa and strictly increasing.
24
25	use conf_gcm_m, only: dayref
26	use dimens_m, only: iim, jjm, llm
27	use netcdf95, only: nf95_open, nf95_close, nf95_inq_varid, handle_err, &
28	nf95_get_coord
29	use netcdf, only: nf90_nowrite, nf90_get_var
30	use numer_rec, only: assert
31	use grid_change, only: dyn_phy
32	use regr1_step_av_m, only: regr1_step_av
33	use pressure_var, only: p3d
34
35	real, intent(out):: o3_mob_regr(:, :, :) ! (iim + 1, jjm + 1, llm)
36	! (ozone mole fraction from Mobidic adapted to the LMDZ grid)
37	! ("o3_mob_regr(i, j, l)" is at longitude "rlonv(i)", latitude
38	! "rlatu(j)" and pressure level "pls(i, j, l)")
39
40	! Variables local to the procedure:
41
42	real, pointer:: plev(:)
43	! (pressure levels of Mobidic data, in Pa, in strictly increasing order)
44
45	real, allocatable:: press_in_edg(:)
46	! (edges of pressure intervals for Mobidic data, in Pa, in strictly
47	! increasing order)
48
49	integer ncid, varid, ncerr ! for NetCDF
50	integer n_plev ! number of pressure levels in Mobidic data
51	integer i, j
52
53	real, allocatable:: r_mob(:, :)! (jjm + 1, n_plev)
54	! (ozone mole fraction from Mobidic at day "dayref")
55	! (r_mob(j, k) is at latitude "rlatu(j)" and pressure level "plev(k)".)
56
57	!------------------------------------------------------------
58
59	print *, "Call sequence information: regr_pr_o3"
60	call assert(shape(o3_mob_regr) == (/iim + 1, jjm + 1, llm/), "regr_pr_o3")
61
62	call nf95_open("coefoz_LMDZ.nc", nf90_nowrite, ncid)
63
64	call nf95_get_coord(ncid, "plev", plev)
65	! Convert from hPa to Pa because "regr_pr_av" requires so:
66	plev = plev * 100.
67	n_plev = size(plev)
68
69	! Compute edges of pressure intervals:
70	allocate(press_in_edg(n_plev + 1))
71	press_in_edg(1) = 0.
72	! We choose edges halfway in logarithm:
73	forall (j = 2:n_plev) press_in_edg(j) = sqrt(plev(j - 1) * plev(j))
74	press_in_edg(n_plev + 1) = huge(0.)
75	! (infinity, but any value guaranteed to be greater than the
76	! surface pressure would do)
77
78	deallocate(plev) ! pointer
79
80	call nf95_inq_varid(ncid, "r_Mob", varid)
81	allocate(r_mob(jjm + 1, n_plev))
82
83	! Get data at the right day from the input file:
84	ncerr = nf90_get_var(ncid, varid, r_mob, start=(/1, 1, dayref/))
85	call handle_err("nf90_get_var r_Mob", ncerr)
86	! Latitudes are in increasing order in the input file while
87	! "rlatu" is in decreasing order so we need to invert order:
88	r_mob = r_mob(jjm+1:1:-1, :)
89
90	call nf95_close(ncid)
91
92	! Regrid in pressure by averaging a step function of pressure:
93	do j = 1, jjm + 1
94	do i = 1, iim
95	if (dyn_phy(i, j)) then
96	o3_mob_regr(i, j, llm:1:-1) &
97	= regr1_step_av(r_mob(j, :), press_in_edg, &
98	p3d(i, j, llm+1:1:-1))
99	! (invert order of indices because "p3d" is decreasing)
100	end if
101	end do
102	end do
103
104	! Duplicate pole values on all longitudes:
105	o3_mob_regr(2:, 1, :) = spread(o3_mob_regr(1, 1, :), dim=1, ncopies=iim)
106	o3_mob_regr(2:, jjm + 1, :) &
107	= spread(o3_mob_regr(1, jjm + 1, :), dim=1, ncopies=iim)
108
109	! Duplicate first longitude to last longitude:
110	o3_mob_regr(iim + 1, 2:jjm, :) = o3_mob_regr(1, 2:jjm, :)
111
112	end subroutine regr_pr_o3
113
114	end module regr_pr_o3_m