--- trunk/libf/phylmd/concvl.f90	2011/01/06 17:52:19	38
+++ trunk/libf/phylmd/concvl.f90	2011/07/01 15:00:48	47
@@ -1,179 +1,186 @@
-SUBROUTINE concvl(iflag_con, dtime, paprs, pplay, t, q, u, v, tra,&
-     ntra, work1, work2, d_t, d_q, d_u, d_v, d_tra, rain, snow, kbas,&
-     ktop, upwd, dnwd, dnwdbis, ma, cape, tvp, iflag, pbase, bbase,&
-     dtvpdt1, dtvpdq1, dplcldt, dplcldr, qcondc, wd, pmflxr, pmflxs,&
-     da, phi, mp)
-
-  ! From phylmd/concvl.F, v 1.3 2005/04/15 12:36:17
-  ! Auteur(s): Z.X. Li (LMD/CNRS) date: 19930818
-  ! Objet: schema de convection de Emanuel (1991) interface
-
-  USE dimens_m
-  USE dimphy
-  USE suphec_m
-  USE yoethf_m
-  USE fcttre
+module concvl_m
 
   IMPLICIT NONE
 
-  ! Arguments:
-  ! dtime--input-R-pas d'integration (s)
-  ! s-------input-R-la valeur "s" pour chaque couche
-  ! sigs----input-R-la valeur "sigma" de chaque couche
-  ! sig-----input-R-la valeur de "sigma" pour chaque niveau
-  ! psolpa--input-R-la pression au sol (en Pa)
-  ! pskapa--input-R-exponentiel kappa de psolpa
-  ! h-------input-R-enthalpie potentielle (Cp*T/P**kappa)
-  ! q-------input-R-vapeur d'eau (en kg/kg)
-
-  ! work*: input et output: deux variables de travail,
-  !                            on peut les mettre a 0 au debut
-  ! ALE-----input-R-energie disponible pour soulevement
-
-  ! d_h-----output-R-increment de l'enthalpie potentielle (h)
-  ! d_q-----output-R-increment de la vapeur d'eau
-  ! rain----output-R-la pluie (mm/s)
-  ! snow----output-R-la neige (mm/s)
-  ! upwd----output-R-saturated updraft mass flux (kg/m**2/s)
-  ! dnwd----output-R-saturated downdraft mass flux (kg/m**2/s)
-  ! dnwd0---output-R-unsaturated downdraft mass flux (kg/m**2/s)
-  ! Cape----output-R-CAPE (J/kg)
-  ! Tvp-----output-R-Temperature virtuelle d'une parcelle soulevee
-  !                  adiabatiquement a partir du niveau 1 (K)
-  ! deltapb-output-R-distance entre LCL et base de la colonne (<0 ;
-  !  Pa)
-  ! Ice_flag-input-L-TRUE->prise en compte de la thermodynamique de
-  !  la glace
-
-  INTEGER ntrac
-  PARAMETER (ntrac=nqmx-2)
-
-  INTEGER, INTENT (IN) :: iflag_con
-
-  REAL, INTENT (IN) :: dtime
-  REAL, INTENT (IN) :: paprs(klon, klev+1)
-  REAL, INTENT (IN) :: pplay(klon, klev)
-  REAL t(klon, klev), q(klon, klev), u(klon, klev), v(klon, klev)
-  REAL, INTENT (IN):: tra(klon, klev, ntrac)
-  INTEGER ntra
-  REAL work1(klon, klev), work2(klon, klev)
-  REAL pmflxr(klon, klev+1), pmflxs(klon, klev+1)
-
-  REAL d_t(klon, klev), d_q(klon, klev), d_u(klon, klev), d_v(klon,&
-       klev)
-  REAL d_tra(klon, klev, ntrac)
-  REAL rain(klon), snow(klon)
-
-  INTEGER kbas(klon), ktop(klon)
-  REAL em_ph(klon, klev+1), em_p(klon, klev)
-  REAL upwd(klon, klev), dnwd(klon, klev), dnwdbis(klon, klev)
-  REAL ma(klon, klev), cape(klon), tvp(klon, klev)
-  REAL da(klon, klev), phi(klon, klev, klev), mp(klon, klev)
-  INTEGER iflag(klon)
-  REAL pbase(klon), bbase(klon)
-  REAL dtvpdt1(klon, klev), dtvpdq1(klon, klev)
-  REAL dplcldt(klon), dplcldr(klon)
-  REAL qcondc(klon, klev)
-  REAL wd(klon)
-
-  REAL zx_t, zdelta, zx_qs, zcor
-
-  INTEGER i, k, itra
-  REAL qs(klon, klev)
-  REAL cbmf(klon)
-  SAVE cbmf
-  INTEGER ifrst
-  SAVE ifrst
-  DATA ifrst/0/
-
-  !-----------------------------------------------------------------
-
-  snow(:) = 0
-
-  IF (ifrst==0) THEN
-     ifrst = 1
-     DO i = 1, klon
-        cbmf(i) = 0.
-     END DO
-  END IF
-
-  DO k = 1, klev + 1
-     DO i = 1, klon
-        em_ph(i, k) = paprs(i, k)/100.0
-        pmflxs(i, k) = 0.
-     END DO
-  END DO
-
-  DO k = 1, klev
-     DO i = 1, klon
-        em_p(i, k) = pplay(i, k)/100.0
-     END DO
-  END DO
-
-
-  IF (iflag_con==4) THEN
-     DO k = 1, klev
-        DO i = 1, klon
-           zx_t = t(i, k)
-           zdelta = max(0., sign(1., rtt-zx_t))
-           zx_qs = min(0.5, r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0)
-           zcor = 1./(1.-retv*zx_qs)
-           qs(i, k) = zx_qs*zcor
-        END DO
-     END DO
-  ELSE
-     ! iflag_con=3 (modif de puristes qui fait la diffce pour la
-     ! convergence numerique)
-     DO k = 1, klev
-        DO i = 1, klon
-           zx_t = t(i, k)
-           zdelta = max(0., sign(1., rtt-zx_t))
-           zx_qs = r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0
-           zx_qs = min(0.5, zx_qs)
-           zcor = 1./(1.-retv*zx_qs)
-           zx_qs = zx_qs*zcor
-           qs(i, k) = zx_qs
-        END DO
-     END DO
-  END IF
-
-  ! Main driver for convection:
-  !		iflag_con = 3  -> equivalent to convect3
-  !		iflag_con = 4  -> equivalent to convect1/2
-
-  CALL cv_driver(klon, klev, klev+1, ntra, iflag_con, t, q, qs, u, v,&
-       tra, em_p, em_ph, iflag, d_t, d_q, d_u, d_v, d_tra, rain,&
-       pmflxr, cbmf, work1, work2, kbas, ktop, dtime, ma, upwd, dnwd,&
-       dnwdbis, qcondc, wd, cape, da, phi, mp)
-
-  DO i = 1, klon
-     rain(i) = rain(i)/86400.
-  END DO
-
-  DO k = 1, klev
-     DO i = 1, klon
-        d_t(i, k) = dtime*d_t(i, k)
-        d_q(i, k) = dtime*d_q(i, k)
-        d_u(i, k) = dtime*d_u(i, k)
-        d_v(i, k) = dtime*d_v(i, k)
-     END DO
-  END DO
-  DO itra = 1, ntra
-     DO k = 1, klev
-        DO i = 1, klon
-           d_tra(i, k, itra) = dtime*d_tra(i, k, itra)
-        END DO
-     END DO
-  END DO
-  ! les traceurs ne sont pas mis dans cette version de convect4:
-  IF (iflag_con==4) THEN
-     DO itra = 1, ntra
-        DO k = 1, klev
-           DO i = 1, klon
-              d_tra(i, k, itra) = 0.
-           END DO
-        END DO
-     END DO
-  END IF
+contains
 
-END SUBROUTINE concvl
+  SUBROUTINE concvl(iflag_con, dtime, paprs, pplay, t, q, u, v, tra, &
+       ntra, work1, work2, d_t, d_q, d_u, d_v, d_tra, rain, snow, kbas, &
+       ktop, upwd, dnwd, dnwdbis, ma, cape, tvp, iflag, pbase, bbase, &
+       dtvpdt1, dtvpdq1, dplcldt, dplcldr, qcondc, wd, pmflxr, pmflxs, &
+       da, phi, mp)
+
+    ! From phylmd/concvl.F, version 1.3 2005/04/15 12:36:17
+    ! Author: Z.X. Li (LMD/CNRS)
+    ! date: 1993/08/18
+    ! Objet: schema de convection de Emanuel (1991) interface
+
+    USE dimens_m, ONLY : nqmx
+    USE dimphy, ONLY : klev, klon
+    USE suphec_m, ONLY : retv, rtt
+    USE yoethf_m, ONLY : r2es
+    USE fcttre, ONLY : foeew
+
+    ! Arguments:
+    ! dtime--input-R-pas d'integration (s)
+    ! s-------input-R-la valeur "s" pour chaque couche
+    ! sigs----input-R-la valeur "sigma" de chaque couche
+    ! sig-----input-R-la valeur de "sigma" pour chaque niveau
+    ! psolpa--input-R-la pression au sol (en Pa)
+    ! pskapa--input-R-exponentiel kappa de psolpa
+    ! h-------input-R-enthalpie potentielle (Cp*T/P**kappa)
+    ! q-------input-R-vapeur d'eau (en kg/kg)
+
+    ! work*: input et output: deux variables de travail,
+    !                            on peut les mettre a 0 au debut
+    ! ALE-----input-R-energie disponible pour soulevement
+
+    ! d_h-----output-R-increment de l'enthalpie potentielle (h)
+    ! d_q-----output-R-increment de la vapeur d'eau
+    ! rain----output-R-la pluie (mm/s)
+    ! snow----output-R-la neige (mm/s)
+    ! upwd----output-R-saturated updraft mass flux (kg/m**2/s)
+    ! dnwd----output-R-saturated downdraft mass flux (kg/m**2/s)
+    ! dnwd0---output-R-unsaturated downdraft mass flux (kg/m**2/s)
+    ! Cape----output-R-CAPE (J/kg)
+    ! Tvp-----output-R-Temperature virtuelle d'une parcelle soulevee
+    !                  adiabatiquement a partir du niveau 1 (K)
+    ! deltapb-output-R-distance entre LCL et base de la colonne (<0 ;
+    !  Pa)
+    ! Ice_flag-input-L-TRUE->prise en compte de la thermodynamique de
+    !  la glace
+
+    INTEGER ntrac
+    PARAMETER (ntrac=nqmx-2)
+
+    INTEGER, INTENT (IN) :: iflag_con
+
+    REAL, INTENT (IN) :: dtime
+    REAL, INTENT (IN) :: paprs(klon, klev+1)
+    REAL, INTENT (IN) :: pplay(klon, klev)
+    REAL t(klon, klev), q(klon, klev), u(klon, klev), v(klon, klev)
+    REAL, INTENT (IN):: tra(klon, klev, ntrac)
+    INTEGER ntra
+    REAL work1(klon, klev), work2(klon, klev)
+    REAL pmflxr(klon, klev+1), pmflxs(klon, klev+1)
+
+    REAL d_t(klon, klev), d_q(klon, klev), d_u(klon, klev), d_v(klon, &
+         klev)
+    REAL d_tra(klon, klev, ntrac)
+    REAL rain(klon), snow(klon)
+
+    INTEGER kbas(klon), ktop(klon)
+    REAL em_ph(klon, klev+1), em_p(klon, klev)
+    REAL upwd(klon, klev), dnwd(klon, klev), dnwdbis(klon, klev)
+    REAL ma(klon, klev), cape(klon), tvp(klon, klev)
+    REAL da(klon, klev), phi(klon, klev, klev), mp(klon, klev)
+    INTEGER iflag(klon)
+    REAL pbase(klon), bbase(klon)
+    REAL dtvpdt1(klon, klev), dtvpdq1(klon, klev)
+    REAL dplcldt(klon), dplcldr(klon)
+    REAL qcondc(klon, klev)
+    REAL wd(klon)
+
+    REAL zx_t, zdelta, zx_qs, zcor
+
+    INTEGER i, k, itra
+    REAL qs(klon, klev)
+    REAL cbmf(klon)
+    SAVE cbmf
+    INTEGER ifrst
+    SAVE ifrst
+    DATA ifrst/0/
+
+    !-----------------------------------------------------------------
+
+    snow(:) = 0
+
+    IF (ifrst==0) THEN
+       ifrst = 1
+       DO i = 1, klon
+          cbmf(i) = 0.
+       END DO
+    END IF
+
+    DO k = 1, klev + 1
+       DO i = 1, klon
+          em_ph(i, k) = paprs(i, k)/100.0
+          pmflxs(i, k) = 0.
+       END DO
+    END DO
+
+    DO k = 1, klev
+       DO i = 1, klon
+          em_p(i, k) = pplay(i, k)/100.0
+       END DO
+    END DO
+
+
+    IF (iflag_con==4) THEN
+       DO k = 1, klev
+          DO i = 1, klon
+             zx_t = t(i, k)
+             zdelta = max(0., sign(1., rtt-zx_t))
+             zx_qs = min(0.5, r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0)
+             zcor = 1./(1.-retv*zx_qs)
+             qs(i, k) = zx_qs*zcor
+          END DO
+       END DO
+    ELSE
+       ! iflag_con=3 (modif de puristes qui fait la diffce pour la
+       ! convergence numerique)
+       DO k = 1, klev
+          DO i = 1, klon
+             zx_t = t(i, k)
+             zdelta = max(0., sign(1., rtt-zx_t))
+             zx_qs = r2es*foeew(zx_t, zdelta)/em_p(i, k)/100.0
+             zx_qs = min(0.5, zx_qs)
+             zcor = 1./(1.-retv*zx_qs)
+             zx_qs = zx_qs*zcor
+             qs(i, k) = zx_qs
+          END DO
+       END DO
+    END IF
+
+    ! Main driver for convection:
+    !		iflag_con = 3  -> equivalent to convect3
+    !		iflag_con = 4  -> equivalent to convect1/2
+
+    CALL cv_driver(klon, klev, klev+1, ntra, iflag_con, t, q, qs, u, v, &
+         tra, em_p, em_ph, iflag, d_t, d_q, d_u, d_v, d_tra, rain, &
+         pmflxr, cbmf, work1, work2, kbas, ktop, dtime, ma, upwd, dnwd, &
+         dnwdbis, qcondc, wd, cape, da, phi, mp)
+
+    DO i = 1, klon
+       rain(i) = rain(i)/86400.
+    END DO
+
+    DO k = 1, klev
+       DO i = 1, klon
+          d_t(i, k) = dtime*d_t(i, k)
+          d_q(i, k) = dtime*d_q(i, k)
+          d_u(i, k) = dtime*d_u(i, k)
+          d_v(i, k) = dtime*d_v(i, k)
+       END DO
+    END DO
+    DO itra = 1, ntra
+       DO k = 1, klev
+          DO i = 1, klon
+             d_tra(i, k, itra) = dtime*d_tra(i, k, itra)
+          END DO
+       END DO
+    END DO
+    ! les traceurs ne sont pas mis dans cette version de convect4:
+    IF (iflag_con==4) THEN
+       DO itra = 1, ntra
+          DO k = 1, klev
+             DO i = 1, klon
+                d_tra(i, k, itra) = 0.
+             END DO
+          END DO
+       END DO
+    END IF
+
+  END SUBROUTINE concvl
+
+end module concvl_m