| 1 |
! |
| 2 |
! $Header: /home/cvsroot/LMDZ4/libf/phylmd/diagphy.F,v 1.1.1.1 2004/05/19 12:53:08 lmdzadmin Exp $ |
| 3 |
! |
| 4 |
SUBROUTINE diagphy(airephy,tit,iprt |
| 5 |
$ , tops, topl, sols, soll, sens |
| 6 |
$ , evap, rain_fall, snow_fall, ts |
| 7 |
$ , d_etp_tot, d_qt_tot, d_ec_tot |
| 8 |
$ , fs_bound, fq_bound) |
| 9 |
C====================================================================== |
| 10 |
C |
| 11 |
C Purpose: |
| 12 |
C Compute the thermal flux and the watter mass flux at the atmosphere |
| 13 |
c boundaries. Print them and also the atmospheric enthalpy change and |
| 14 |
C the atmospheric mass change. |
| 15 |
C |
| 16 |
C Arguments: |
| 17 |
C airephy-------input-R- grid area |
| 18 |
C tit---------input-A15- Comment to be added in PRINT (CHARACTER*15) |
| 19 |
C iprt--------input-I- PRINT level ( <=0 : no PRINT) |
| 20 |
C tops(klon)--input-R- SW rad. at TOA (W/m2), positive up. |
| 21 |
C topl(klon)--input-R- LW rad. at TOA (W/m2), positive down |
| 22 |
C sols(klon)--input-R- Net SW flux above surface (W/m2), positive up |
| 23 |
C (i.e. -1 * flux absorbed by the surface) |
| 24 |
C soll(klon)--input-R- Net LW flux above surface (W/m2), positive up |
| 25 |
C (i.e. flux emited - flux absorbed by the surface) |
| 26 |
C sens(klon)--input-R- Sensible Flux at surface (W/m2), positive down |
| 27 |
C evap(klon)--input-R- Evaporation + sublimation watter vapour mass flux |
| 28 |
C (kg/m2/s), positive up |
| 29 |
C rain_fall(klon) |
| 30 |
C --input-R- Liquid watter mass flux (kg/m2/s), positive down |
| 31 |
C snow_fall(klon) |
| 32 |
C --input-R- Solid watter mass flux (kg/m2/s), positive down |
| 33 |
C ts(klon)----input-R- Surface temperature (K) |
| 34 |
C d_etp_tot---input-R- Heat flux equivalent to atmospheric enthalpy |
| 35 |
C change (W/m2) |
| 36 |
C d_qt_tot----input-R- Mass flux equivalent to atmospheric watter mass |
| 37 |
C change (kg/m2/s) |
| 38 |
C d_ec_tot----input-R- Flux equivalent to atmospheric cinetic energy |
| 39 |
C change (W/m2) |
| 40 |
C |
| 41 |
C fs_bound---output-R- Thermal flux at the atmosphere boundaries (W/m2) |
| 42 |
C fq_bound---output-R- Watter mass flux at the atmosphere boundaries (kg/m2/s) |
| 43 |
C |
| 44 |
C J.L. Dufresne, July 2002 |
| 45 |
C====================================================================== |
| 46 |
C |
| 47 |
use dimens_m |
| 48 |
use dimphy |
| 49 |
use YOMCST |
| 50 |
use yoethf |
| 51 |
implicit none |
| 52 |
|
| 53 |
C |
| 54 |
C Input variables |
| 55 |
real airephy(klon) |
| 56 |
CHARACTER*15 tit |
| 57 |
INTEGER iprt |
| 58 |
real tops(klon),topl(klon),sols(klon),soll(klon) |
| 59 |
real sens(klon),evap(klon),rain_fall(klon),snow_fall(klon) |
| 60 |
REAL ts(klon) |
| 61 |
REAL d_etp_tot, d_qt_tot, d_ec_tot |
| 62 |
c Output variables |
| 63 |
REAL fs_bound, fq_bound |
| 64 |
C |
| 65 |
C Local variables |
| 66 |
real stops,stopl,ssols,ssoll |
| 67 |
real ssens,sfront,slat |
| 68 |
real airetot, zcpvap, zcwat, zcice |
| 69 |
REAL rain_fall_tot, snow_fall_tot, evap_tot |
| 70 |
C |
| 71 |
integer i |
| 72 |
C |
| 73 |
integer pas |
| 74 |
save pas |
| 75 |
data pas/0/ |
| 76 |
C |
| 77 |
pas=pas+1 |
| 78 |
stops=0. |
| 79 |
stopl=0. |
| 80 |
ssols=0. |
| 81 |
ssoll=0. |
| 82 |
ssens=0. |
| 83 |
sfront = 0. |
| 84 |
evap_tot = 0. |
| 85 |
rain_fall_tot = 0. |
| 86 |
snow_fall_tot = 0. |
| 87 |
airetot=0. |
| 88 |
C |
| 89 |
C Pour les chaleur specifiques de la vapeur d'eau, de l'eau et de |
| 90 |
C la glace, on travaille par difference a la chaleur specifique de l' |
| 91 |
c air sec. En effet, comme on travaille a niveau de pression donne, |
| 92 |
C toute variation de la masse d'un constituant est totalement |
| 93 |
c compense par une variation de masse d'air. |
| 94 |
C |
| 95 |
zcpvap=RCPV-RCPD |
| 96 |
zcwat=RCW-RCPD |
| 97 |
zcice=RCS-RCPD |
| 98 |
C |
| 99 |
do i=1,klon |
| 100 |
stops=stops+tops(i)*airephy(i) |
| 101 |
stopl=stopl+topl(i)*airephy(i) |
| 102 |
ssols=ssols+sols(i)*airephy(i) |
| 103 |
ssoll=ssoll+soll(i)*airephy(i) |
| 104 |
ssens=ssens+sens(i)*airephy(i) |
| 105 |
sfront = sfront |
| 106 |
$ + ( evap(i)*zcpvap-rain_fall(i)*zcwat-snow_fall(i)*zcice |
| 107 |
$ ) *ts(i) *airephy(i) |
| 108 |
evap_tot = evap_tot + evap(i)*airephy(i) |
| 109 |
rain_fall_tot = rain_fall_tot + rain_fall(i)*airephy(i) |
| 110 |
snow_fall_tot = snow_fall_tot + snow_fall(i)*airephy(i) |
| 111 |
airetot=airetot+airephy(i) |
| 112 |
enddo |
| 113 |
stops=stops/airetot |
| 114 |
stopl=stopl/airetot |
| 115 |
ssols=ssols/airetot |
| 116 |
ssoll=ssoll/airetot |
| 117 |
ssens=ssens/airetot |
| 118 |
sfront = sfront/airetot |
| 119 |
evap_tot = evap_tot /airetot |
| 120 |
rain_fall_tot = rain_fall_tot/airetot |
| 121 |
snow_fall_tot = snow_fall_tot/airetot |
| 122 |
C |
| 123 |
slat = RLVTT * rain_fall_tot + RLSTT * snow_fall_tot |
| 124 |
C Heat flux at atm. boundaries |
| 125 |
fs_bound = stops-stopl - (ssols+ssoll)+ssens+sfront |
| 126 |
$ + slat |
| 127 |
C Watter flux at atm. boundaries |
| 128 |
fq_bound = evap_tot - rain_fall_tot -snow_fall_tot |
| 129 |
C |
| 130 |
IF (iprt.ge.1) write(6,6666) |
| 131 |
$ tit, pas, fs_bound, d_etp_tot, fq_bound, d_qt_tot |
| 132 |
C |
| 133 |
IF (iprt.ge.1) write(6,6668) |
| 134 |
$ tit, pas, d_etp_tot+d_ec_tot-fs_bound, d_qt_tot-fq_bound |
| 135 |
C |
| 136 |
IF (iprt.ge.2) write(6,6667) |
| 137 |
$ tit, pas, stops,stopl,ssols,ssoll,ssens,slat,evap_tot |
| 138 |
$ ,rain_fall_tot+snow_fall_tot |
| 139 |
|
| 140 |
return |
| 141 |
|
| 142 |
6666 format('Phys. Flux Budget ',a15,1i6,2f8.2,2(1pE13.5)) |
| 143 |
6667 format('Phys. Boundary Flux ',a15,1i6,6f8.2,2(1pE13.5)) |
| 144 |
6668 format('Phys. Total Budget ',a15,1i6,f8.2,2(1pE13.5)) |
| 145 |
|
| 146 |
end |
| 147 |
|
| 148 |
C====================================================================== |
| 149 |
SUBROUTINE diagetpq(airephy,tit,iprt,idiag,idiag2,dtime |
| 150 |
e ,t,q,ql,qs,u,v,paprs,pplay |
| 151 |
s , d_h_vcol, d_qt, d_qw, d_ql, d_qs, d_ec) |
| 152 |
C====================================================================== |
| 153 |
C |
| 154 |
C Purpose: |
| 155 |
C Calcul la difference d'enthalpie et de masse d'eau entre 2 appels, |
| 156 |
C et calcul le flux de chaleur et le flux d'eau necessaire a ces |
| 157 |
C changements. Ces valeurs sont moyennees sur la surface de tout |
| 158 |
C le globe et sont exprime en W/2 et kg/s/m2 |
| 159 |
C Outil pour diagnostiquer la conservation de l'energie |
| 160 |
C et de la masse dans la physique. Suppose que les niveau de |
| 161 |
c pression entre couche ne varie pas entre 2 appels. |
| 162 |
C |
| 163 |
C Plusieurs de ces diagnostics peuvent etre fait en parallele: les |
| 164 |
c bilans sont sauvegardes dans des tableaux indices. On parlera |
| 165 |
C "d'indice de diagnostic" |
| 166 |
c |
| 167 |
C |
| 168 |
c====================================================================== |
| 169 |
C Arguments: |
| 170 |
C airephy-------input-R- grid area |
| 171 |
C tit-----imput-A15- Comment added in PRINT (CHARACTER*15) |
| 172 |
C iprt----input-I- PRINT level ( <=1 : no PRINT) |
| 173 |
C idiag---input-I- indice dans lequel sera range les nouveaux |
| 174 |
C bilans d' entalpie et de masse |
| 175 |
C idiag2--input-I-les nouveaux bilans d'entalpie et de masse |
| 176 |
C sont compare au bilan de d'enthalpie de masse de |
| 177 |
C l'indice numero idiag2 |
| 178 |
C Cas parriculier : si idiag2=0, pas de comparaison, on |
| 179 |
c sort directement les bilans d'enthalpie et de masse |
| 180 |
C dtime----input-R- time step (s) |
| 181 |
c t--------input-R- temperature (K) |
| 182 |
c q--------input-R- vapeur d'eau (kg/kg) |
| 183 |
c ql-------input-R- liquid watter (kg/kg) |
| 184 |
c qs-------input-R- solid watter (kg/kg) |
| 185 |
c u--------input-R- vitesse u |
| 186 |
c v--------input-R- vitesse v |
| 187 |
c paprs----input-R- pression a intercouche (Pa) |
| 188 |
c pplay----input-R- pression au milieu de couche (Pa) |
| 189 |
c |
| 190 |
C the following total value are computed by UNIT of earth surface |
| 191 |
C |
| 192 |
C d_h_vcol--output-R- Heat flux (W/m2) define as the Enthalpy |
| 193 |
c change (J/m2) during one time step (dtime) for the whole |
| 194 |
C atmosphere (air, watter vapour, liquid and solid) |
| 195 |
C d_qt------output-R- total water mass flux (kg/m2/s) defined as the |
| 196 |
C total watter (kg/m2) change during one time step (dtime), |
| 197 |
C d_qw------output-R- same, for the watter vapour only (kg/m2/s) |
| 198 |
C d_ql------output-R- same, for the liquid watter only (kg/m2/s) |
| 199 |
C d_qs------output-R- same, for the solid watter only (kg/m2/s) |
| 200 |
C d_ec------output-R- Cinetic Energy Budget (W/m2) for vertical air column |
| 201 |
C |
| 202 |
C other (COMMON...) |
| 203 |
C RCPD, RCPV, .... |
| 204 |
C |
| 205 |
C J.L. Dufresne, July 2002 |
| 206 |
c====================================================================== |
| 207 |
|
| 208 |
use dimens_m |
| 209 |
use dimphy |
| 210 |
use YOMCST |
| 211 |
use yoethf |
| 212 |
IMPLICIT NONE |
| 213 |
C |
| 214 |
C |
| 215 |
c Input variables |
| 216 |
real airephy(klon) |
| 217 |
CHARACTER*15 tit |
| 218 |
INTEGER iprt,idiag, idiag2 |
| 219 |
REAL, intent(in):: dtime |
| 220 |
REAL t(klon,klev), q(klon,klev), ql(klon,klev), qs(klon,klev) |
| 221 |
REAL u(klon,klev), v(klon,klev) |
| 222 |
REAL, intent(in):: paprs(klon,klev+1) |
| 223 |
real pplay(klon,klev) |
| 224 |
c Output variables |
| 225 |
REAL d_h_vcol, d_qt, d_qw, d_ql, d_qs, d_ec |
| 226 |
C |
| 227 |
C Local variables |
| 228 |
c |
| 229 |
REAL h_vcol_tot, h_dair_tot, h_qw_tot, h_ql_tot |
| 230 |
. , h_qs_tot, qw_tot, ql_tot, qs_tot , ec_tot |
| 231 |
c h_vcol_tot-- total enthalpy of vertical air column |
| 232 |
C (air with watter vapour, liquid and solid) (J/m2) |
| 233 |
c h_dair_tot-- total enthalpy of dry air (J/m2) |
| 234 |
c h_qw_tot---- total enthalpy of watter vapour (J/m2) |
| 235 |
c h_ql_tot---- total enthalpy of liquid watter (J/m2) |
| 236 |
c h_qs_tot---- total enthalpy of solid watter (J/m2) |
| 237 |
c qw_tot------ total mass of watter vapour (kg/m2) |
| 238 |
c ql_tot------ total mass of liquid watter (kg/m2) |
| 239 |
c qs_tot------ total mass of solid watter (kg/m2) |
| 240 |
c ec_tot------ total cinetic energy (kg/m2) |
| 241 |
C |
| 242 |
REAL zairm(klon,klev) ! layer air mass (kg/m2) |
| 243 |
REAL zqw_col(klon) |
| 244 |
REAL zql_col(klon) |
| 245 |
REAL zqs_col(klon) |
| 246 |
REAL zec_col(klon) |
| 247 |
REAL zh_dair_col(klon) |
| 248 |
REAL zh_qw_col(klon), zh_ql_col(klon), zh_qs_col(klon) |
| 249 |
C |
| 250 |
REAL d_h_dair, d_h_qw, d_h_ql, d_h_qs |
| 251 |
C |
| 252 |
REAL airetot, zcpvap, zcwat, zcice |
| 253 |
C |
| 254 |
INTEGER i, k |
| 255 |
C |
| 256 |
INTEGER ndiag ! max number of diagnostic in parallel |
| 257 |
PARAMETER (ndiag=10) |
| 258 |
integer pas(ndiag) |
| 259 |
save pas |
| 260 |
data pas/ndiag*0/ |
| 261 |
C |
| 262 |
REAL h_vcol_pre(ndiag), h_dair_pre(ndiag), h_qw_pre(ndiag) |
| 263 |
$ , h_ql_pre(ndiag), h_qs_pre(ndiag), qw_pre(ndiag) |
| 264 |
$ , ql_pre(ndiag), qs_pre(ndiag) , ec_pre(ndiag) |
| 265 |
SAVE h_vcol_pre, h_dair_pre, h_qw_pre, h_ql_pre |
| 266 |
$ , h_qs_pre, qw_pre, ql_pre, qs_pre , ec_pre |
| 267 |
|
| 268 |
c====================================================================== |
| 269 |
C |
| 270 |
DO k = 1, klev |
| 271 |
DO i = 1, klon |
| 272 |
C layer air mass |
| 273 |
zairm(i,k) = (paprs(i,k)-paprs(i,k+1))/RG |
| 274 |
ENDDO |
| 275 |
END DO |
| 276 |
C |
| 277 |
C Reset variables |
| 278 |
DO i = 1, klon |
| 279 |
zqw_col(i)=0. |
| 280 |
zql_col(i)=0. |
| 281 |
zqs_col(i)=0. |
| 282 |
zec_col(i) = 0. |
| 283 |
zh_dair_col(i) = 0. |
| 284 |
zh_qw_col(i) = 0. |
| 285 |
zh_ql_col(i) = 0. |
| 286 |
zh_qs_col(i) = 0. |
| 287 |
ENDDO |
| 288 |
C |
| 289 |
zcpvap=RCPV |
| 290 |
zcwat=RCW |
| 291 |
zcice=RCS |
| 292 |
C |
| 293 |
C Compute vertical sum for each atmospheric column |
| 294 |
C ================================================ |
| 295 |
DO k = 1, klev |
| 296 |
DO i = 1, klon |
| 297 |
C Watter mass |
| 298 |
zqw_col(i) = zqw_col(i) + q(i,k)*zairm(i,k) |
| 299 |
zql_col(i) = zql_col(i) + ql(i,k)*zairm(i,k) |
| 300 |
zqs_col(i) = zqs_col(i) + qs(i,k)*zairm(i,k) |
| 301 |
C Cinetic Energy |
| 302 |
zec_col(i) = zec_col(i) |
| 303 |
$ +0.5*(u(i,k)**2+v(i,k)**2)*zairm(i,k) |
| 304 |
C Air enthalpy |
| 305 |
zh_dair_col(i) = zh_dair_col(i) |
| 306 |
$ + RCPD*(1.-q(i,k)-ql(i,k)-qs(i,k))*zairm(i,k)*t(i,k) |
| 307 |
zh_qw_col(i) = zh_qw_col(i) |
| 308 |
$ + zcpvap*q(i,k)*zairm(i,k)*t(i,k) |
| 309 |
zh_ql_col(i) = zh_ql_col(i) |
| 310 |
$ + zcwat*ql(i,k)*zairm(i,k)*t(i,k) |
| 311 |
$ - RLVTT*ql(i,k)*zairm(i,k) |
| 312 |
zh_qs_col(i) = zh_qs_col(i) |
| 313 |
$ + zcice*qs(i,k)*zairm(i,k)*t(i,k) |
| 314 |
$ - RLSTT*qs(i,k)*zairm(i,k) |
| 315 |
|
| 316 |
END DO |
| 317 |
ENDDO |
| 318 |
C |
| 319 |
C Mean over the planete surface |
| 320 |
C ============================= |
| 321 |
qw_tot = 0. |
| 322 |
ql_tot = 0. |
| 323 |
qs_tot = 0. |
| 324 |
ec_tot = 0. |
| 325 |
h_vcol_tot = 0. |
| 326 |
h_dair_tot = 0. |
| 327 |
h_qw_tot = 0. |
| 328 |
h_ql_tot = 0. |
| 329 |
h_qs_tot = 0. |
| 330 |
airetot=0. |
| 331 |
C |
| 332 |
do i=1,klon |
| 333 |
qw_tot = qw_tot + zqw_col(i)*airephy(i) |
| 334 |
ql_tot = ql_tot + zql_col(i)*airephy(i) |
| 335 |
qs_tot = qs_tot + zqs_col(i)*airephy(i) |
| 336 |
ec_tot = ec_tot + zec_col(i)*airephy(i) |
| 337 |
h_dair_tot = h_dair_tot + zh_dair_col(i)*airephy(i) |
| 338 |
h_qw_tot = h_qw_tot + zh_qw_col(i)*airephy(i) |
| 339 |
h_ql_tot = h_ql_tot + zh_ql_col(i)*airephy(i) |
| 340 |
h_qs_tot = h_qs_tot + zh_qs_col(i)*airephy(i) |
| 341 |
airetot=airetot+airephy(i) |
| 342 |
END DO |
| 343 |
C |
| 344 |
qw_tot = qw_tot/airetot |
| 345 |
ql_tot = ql_tot/airetot |
| 346 |
qs_tot = qs_tot/airetot |
| 347 |
ec_tot = ec_tot/airetot |
| 348 |
h_dair_tot = h_dair_tot/airetot |
| 349 |
h_qw_tot = h_qw_tot/airetot |
| 350 |
h_ql_tot = h_ql_tot/airetot |
| 351 |
h_qs_tot = h_qs_tot/airetot |
| 352 |
C |
| 353 |
h_vcol_tot = h_dair_tot+h_qw_tot+h_ql_tot+h_qs_tot |
| 354 |
C |
| 355 |
C Compute the change of the atmospheric state compare to the one |
| 356 |
C stored in "idiag2", and convert it in flux. THis computation |
| 357 |
C is performed IF idiag2 /= 0 and IF it is not the first CALL |
| 358 |
c for "idiag" |
| 359 |
C =================================== |
| 360 |
C |
| 361 |
IF ( (idiag2.gt.0) .and. (pas(idiag2) .ne. 0) ) THEN |
| 362 |
d_h_vcol = (h_vcol_tot - h_vcol_pre(idiag2) )/dtime |
| 363 |
d_h_dair = (h_dair_tot- h_dair_pre(idiag2))/dtime |
| 364 |
d_h_qw = (h_qw_tot - h_qw_pre(idiag2) )/dtime |
| 365 |
d_h_ql = (h_ql_tot - h_ql_pre(idiag2) )/dtime |
| 366 |
d_h_qs = (h_qs_tot - h_qs_pre(idiag2) )/dtime |
| 367 |
d_qw = (qw_tot - qw_pre(idiag2) )/dtime |
| 368 |
d_ql = (ql_tot - ql_pre(idiag2) )/dtime |
| 369 |
d_qs = (qs_tot - qs_pre(idiag2) )/dtime |
| 370 |
d_ec = (ec_tot - ec_pre(idiag2) )/dtime |
| 371 |
d_qt = d_qw + d_ql + d_qs |
| 372 |
ELSE |
| 373 |
d_h_vcol = 0. |
| 374 |
d_h_dair = 0. |
| 375 |
d_h_qw = 0. |
| 376 |
d_h_ql = 0. |
| 377 |
d_h_qs = 0. |
| 378 |
d_qw = 0. |
| 379 |
d_ql = 0. |
| 380 |
d_qs = 0. |
| 381 |
d_ec = 0. |
| 382 |
d_qt = 0. |
| 383 |
ENDIF |
| 384 |
C |
| 385 |
IF (iprt.ge.2) THEN |
| 386 |
WRITE(6,9000) tit,pas(idiag),d_qt,d_qw,d_ql,d_qs |
| 387 |
9000 format('Phys. Watter Mass Budget (kg/m2/s)',A15 |
| 388 |
$ ,1i6,10(1pE14.6)) |
| 389 |
WRITE(6,9001) tit,pas(idiag), d_h_vcol |
| 390 |
9001 format('Phys. Enthalpy Budget (W/m2) ',A15,1i6,10(F8.2)) |
| 391 |
WRITE(6,9002) tit,pas(idiag), d_ec |
| 392 |
9002 format('Phys. Cinetic Energy Budget (W/m2) ',A15,1i6,10(F8.2)) |
| 393 |
END IF |
| 394 |
C |
| 395 |
C Store the new atmospheric state in "idiag" |
| 396 |
C |
| 397 |
pas(idiag)=pas(idiag)+1 |
| 398 |
h_vcol_pre(idiag) = h_vcol_tot |
| 399 |
h_dair_pre(idiag) = h_dair_tot |
| 400 |
h_qw_pre(idiag) = h_qw_tot |
| 401 |
h_ql_pre(idiag) = h_ql_tot |
| 402 |
h_qs_pre(idiag) = h_qs_tot |
| 403 |
qw_pre(idiag) = qw_tot |
| 404 |
ql_pre(idiag) = ql_tot |
| 405 |
qs_pre(idiag) = qs_tot |
| 406 |
ec_pre (idiag) = ec_tot |
| 407 |
C |
| 408 |
RETURN |
| 409 |
END |
Parent Directory
| 
Revision Log