[lmdze] Log of /trunk/libf/phylmd

Revision 37 - Directory Listing
Modified Tue Dec 21 15:45:48 2010 UTC (13 years, 4 months ago) by guez

Inlined procedure "pression".

Split "guide.f90" into "guide.f90" and "tau2alpha.f90". Split
"read_reanalyse.f" into single-procedure files in directory
"Read_reanalyse".

Useless copy of variables in "iniphysiq". Directly define module
variables in "gcm" and remove procedure "iniphysiq".

Added "pressure-altitude" in "test_disvert".

Revision 34 - Directory Listing
Modified Wed Jun 2 11:01:12 2010 UTC (13 years, 11 months ago) by guez

Split "ini_hist.f90" into single-procedure files.

In "calfis" and "physiq", removed dummy argument "nq" since "nq" must
be equal to "nqmx".

In "calfis", renamed dummy argument "pq" to "q", same name as actual
argument in "leapfrog". Renamed local variable "zqfi" to "qx", same
name as dummy argument in "physiq".

Removed arguments "itop_con" and "ibas_con" of "phytrac", which were
not used.

Revision 32 - Directory Listing
Modified Tue Apr 6 17:52:58 2010 UTC (14 years ago) by guez

Split "stringop.f90" into single-procedure files. Gathered files in directory
"IOIPSL/Stringop".

Split "flincom.f90" into "flincom.f90" and "flinget.f90". Removed
unused procedures from module "flincom". Removed unused argument
"filename" of procedure "flinopen_nozoom".

Removed unused files.

Split "grid_change.f90" into "grid_change.f90" and
"gr_phy_write_3d.f90".

Removed unused procedures from modules "calendar", "ioipslmpp",
"grid_atob", "gath_cpl" and "getincom". Removed unused procedures in
files "ppm3d.f" and "thermcell.f".

Split "mathelp.f90" into "mathelp.f90" and "mathop.f90".

Removed unused variable "dpres" of module "comvert".

Use argument "itau" instead of local variables "iadvtr" and "first" to
control algorithm in procedure "fluxstokenc".

Removed unused arguments of procedure "integrd".

Removed useless computations at the end of procedure "leapfrog".

Merged common block "matrfil" into module "parafilt".

Revision 28 - Directory Listing
Modified Fri Mar 26 18:33:04 2010 UTC (14 years, 1 month ago) by guez

Removed unused "diagedyn.f" and "undefSTD.f".

In "etat0", the variable "dt" of module "temps" was defined from
"landicered.nc", which was meaningless and useless. Replaced "dt" by a
local trash variable.

Removed variable "dt" from module "temps" and created instead a local
variable of "leapfrog" and an argument of "integrd".

Revision 27 - Directory Listing
Modified Thu Mar 25 14:29:07 2010 UTC (14 years, 1 month ago) by guez

"dyn3d" and "filtrez" do not contain any included file so make rules
have been updated.

"comdissip.f90" was useless, removed it.

"dynredem0" wrote undefined value in "controle(31)", that was
overwritten by "dynredem1". Now "dynredem0" just writes 0 to
"controle(31)".

Removed arguments of "inidissip". "inidissip" now accesses the
variables by use association.

In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote
undefined value to "controle(31)". Added argument "itau" of
"dynredem1" to correct that.

"itaufin" does not need to be a module variable (of "temps"), made it
a local variable of "leapfrog".

Removed calls to "diagedyn" from "leapfrog".

Revision 25 - Directory Listing
Modified Fri Mar 5 16:43:45 2010 UTC (14 years, 2 months ago) by guez

Simplified "etat0_lim.sh" and "gcm.sh" because the full versions
depended on personal arrangements for directories and machines.

Translated included files into modules. Encapsulated procedures into modules.

Moved variables from module "comgeom" to local variables of
"inigeom". Deleted some unused variables in "comgeom".

Moved variable "day_ini" from module "temps" to module "dynetat0_m".

Removed useless test on variable "time" and useless "close" statement
in procedure "leapfrog".

Removed useless call to "inigeom" in procedure "limit".

Revision 23 - Directory Listing
Modified Mon Dec 14 15:25:16 2009 UTC (14 years, 4 months ago) by guez

Split "orografi.f": one file for each procedure. Put the created files
in new directory "Orography".

Removed argument "vcov" of procedure "sortvarc". Removed arguments
"itau" and "time" of procedure "caldyn0". Removed arguments "itau",
"time" and "vcov" of procedure "sortvarc0".

Removed argument "time" of procedure "dynredem1". Removed NetCDF
variable "temps" in files "start.nc" and "restart.nc", because its
value is always 0.

Removed argument "nq" of procedures "iniadvtrac" and "leapfrog". The
number of "tracers read in "traceur.def" must now be equal to "nqmx",
or "nqmx" must equal 4 if there is no file "traceur.def". Replaced
variable "nq" by constant "nqmx" in "leapfrog".

NetCDF variable for ozone field in "coefoz.nc" must now be called
"tro3" instead of "r".

Fixed bug in "zenang".

Revision 20 - Directory Listing
Modified Wed Oct 15 16:19:57 2008 UTC (15 years, 6 months ago) by guez

Deleted argument "presnivs" of "physiq", "ini_histhf", "ini_histhf3d",
"ini_histday", "ini_histins", "ini_histrac", "phytrac". Access it from
"comvert" instead.

Replaced calls to NetCDF Fortran 77 interface by calls to Fortran 90
interface or to NetCDF95.

Procedure "gr_phy_write_3d" now works with a variable of arbitrary
size in the second dimension.

Annotated use statements with "only" clause.

Replaced calls to NetCDF interface version 2 by calls to Fortran 90
interface in "guide.f90" and "read_reanalyse.f".

In "write_histrac", replaced calls to "gr_fi_ecrit" by calls to
"gr_phy_write_2d" and "gr_phy_write_3d".

Revision 18 - Directory Listing
Modified Thu Aug 7 12:29:13 2008 UTC (15 years, 8 months ago) by guez

In module "regr_pr", rewrote scanning of horizontal positions as a
single set of loops, using a mask.

Added some "intent" attributes.

In "dynredem0", replaced calls to Fortran 77 interface of NetCDF by
calls to NetCDF95. Removed calls to "nf_redef", regrouped all writing
operations. In "dynredem1", replaced some calls to Fortran 77
interface of NetCDF by calls to Fortran 90 interface.

Renamed variable "nqmax" to "nq_phys".

In "physiq", if "nq >= 5" then "wo" is computed from the
parameterization of "Cariolle".

Revision 17 - Directory Listing
Modified Tue Aug 5 13:31:32 2008 UTC (15 years, 8 months ago) by guez

Created rule for "compare_sampl_*" files in
"Documentation/Manuel_LMDZE.texfol/Graphiques/GNUmakefile".

Extracted "qcheck", "radiornpb", "minmaxqfi" into separate files.

Read pressure coordinate of ozone coefficients once per run instead of
every day.

Added some "intent" attributes.

Added argument "nq" to "ini_histday". Replaced calls to "gr_fi_ecrit"
by calls to "gr_phy_write_2d". "Sigma_O3_Royer" is written to
"histday.nc" only if "nq >= 4". Moved "ini_histrac" to module
"ini_hist".

Compute "zmasse" in "physiq", pass it to "phytrac".

Removed computations of "pftsol*" and "ppsrf*" in "phytrac".

Do not use variable "rg" from module "YOMCST" in "TLIFT".

Revision 15 - Directory Listing
Modified Fri Aug 1 15:24:12 2008 UTC (15 years, 9 months ago) by guez

-- Minor modification of input/output:

Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not
modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1",
"ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4"
"mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from
"histrac.nc".

Variable "raz_date" of module "conf_gcm_m" has logical type instead of
integer type.

-- Should not change any result at run time:

Modified calls to "IOIPSL_Lionel" procedures because the interfaces of
these procedures have been simplified.

Changed name of variable in module "start_init_orog_m": "masque" to
"mask".

Created a module containing procedure "phyredem".

Removed arguments "punjours", "pdayref" and "ptimestep" of procedure
"iniphysiq".

Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created
procedure "gr_phy_write_3d".

Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev",
"calcul_divers".

Revision 13 - Directory Listing
Modified Fri Jul 25 19:59:34 2008 UTC (15 years, 9 months ago) by guez

-- Minor change of behaviour:

"etat0" does not compute "rugsrel" nor "radpas". Deleted arguments
"radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of
"phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In
"physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program
"etat0_lim" does not use "clesphys2".

-- Minor modification of input/output:

Created subroutine "read_clesphys2". Variables of "clesphys2" are read
in "read_clesphys2" instead of "conf_gcm". "printflag" does not print
variables of "clesphys2".

-- Should not change any result at run time:

References to module "numer_rec" instead of individual modules of
"Numer_rec_Lionel".

Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm",
"leapfrog", "phyetat0". Deleted variable "clesphy0" in
"gcm". "phyetat0" does not modify variables of "clesphys2".

The program unit "gcm" does not modify "itau_phy".

Added some "intent" attributes.

"regr11_lint" does not call "polint".

Revision 12 - Directory Listing
Modified Mon Jul 21 16:05:07 2008 UTC (15 years, 9 months ago) by guez

-- Minor modification of input/output:

Created procedure "read_logic". Variables of module "logic" are read
by "read_logic" instead of "conf_gcm". Variable "offline" of module
"conf_gcm" is read from namelist instead of "*.def".

Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0",
"tabcntr0" and local variables "radpas", "tab_cntrl" of
"phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any
longer. "phyetat0" now reads global attribute "itau_phy" from
"startphy.nc". "phyredem" does not create variable "controle" in
"startphy.nc" any longer. "phyredem" now writes global attribute
"itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of
"printflag". Removed diagnostic messages written by "printflag" for
comparison of the variable "controle" of "startphy.nc" and the
variables read from "*.def" or namelist input.

-- Removing unwanted functionality:

Removed variable "lunout" from module "iniprint", replaced everywhere
by standard output.

Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and
"physiq". Removed procedure "interfoce_cpl".

-- Should not change anything at run time:

Automated creation of graphs in documentation. More documentation on
input files.

Converted Fortran files to free format: "phyredem.f90", "printflag.f90".

Split module "clesphy" into "clesphys" and "clesphys2".

Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and
"statcl" from module "logic". Added arguments "conser" to "advect",
"leapf" to "integrd". Added local variables "forward", "leapf",
"apphys", "conser", "apdiss" in "leapfrog".

Added intent attributes.

Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh"
of "phytrac", "dt" of "yamada".

Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0",
"length", "tabcntr0" in "physiq". Replaced all references to "dtime"
by references to "pdtphys".

Revision 10 - Directory Listing
Modified Fri Apr 18 14:45:53 2008 UTC (16 years ago) by guez

Added NetCDF directory "/home/guez/include" in "g95.mk" and
"nag_tools.mk".

Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac",
"calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec",
"calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3",
"conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2",
"drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell".

Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo"
and messages for end of run from "abort_gcm" to "gcm"; replaced call
to "abort_gcm" in "leapfrog" by exit from outer loop.

In "calfis": removed argument "pp" and variable "unskap"; changed
"pksurcp" from scalar to rank 2; use "pressure_var"; rewrote
computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy";
added computation of "pls".

Removed unused variable in "dynredem0".

In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call
to "ssum" by call to "sum"; removed variables "xpn" and "xps";
replaced some loops by array expressions.

In "leapfrog": use "pressure_var"; deleted variables "p", "longcles".

Converted common blocks "YOECUMF", "YOEGWD" to modules.

Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr".

Created module "raddimlw" from include file "raddimlw.h".

Corrected call to "new_unit" in "test_disvert".

Revision 7 - Directory Listing
Modified Mon Mar 31 12:24:17 2008 UTC (16 years, 1 month ago) by guez

This revision is not in working order. Pending some moving of files.

Important changes. In the program "etat0_lim": ozone coefficients from
Mobidic are regridded in time instead of pressure ; consequences in
"etat0". In the program "gcm", ozone coefficients from Mobidic are
read once per day only for the current day and regridded in pressure ;
consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and
"regr_pr_comb_coefoz_m".

NetCDF95 is a library and does not export NetCDF.

New variables "nag_gl_options", "nag_fcalls_options" and
"nag_cross_options" in "nag_tools.mk".

"check_coefoz.jnl" rewritten entirely for new version of
"coefoz_LMDZ.nc".

Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk".

Added some "intent" attributes in "calfis", "clmain", "clqh",
"cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD",
"nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind"
and "undefSTD".

In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of
1. "phis" has assumed shape in "dynredem0".

Added module containing "dynredem0". Changed some calls with NetCDF
Fortran 77 interface to calls with NetCDF95 interface.

Replaced calls to "ssum" by calls to "sum" in "inigeom".

In "make.sh", new option "-c" to change compiler.

In "aaam_bud", argument "rjour" deleted.

In "physiq": renamed some variables; deleted variable "xjour".

In "phytrac": renamed some variables; new argument "lmt_pas".

	ViewVC Help
Powered by ViewVC 1.1.21