[lmdze] Log of /trunk/misc

Revision 328 - Directory Listing
Modified Thu Jun 13 14:40:06 2019 UTC (4 years, 10 months ago) by guez

Change all `.f` suffixes to `.f90`. (The opposite was done in revision
82.)  Because of change of philosopy in GNUmakefile: we already had a
rewritten rule for `.f`, so it does not make the makefile longer to
replace it by a rule for `.f90`. And it spares us options of
makedepf90 and of the compiler. Also we prepare the way for a simpler
`CMakeLists.txt`.

Revision 276 - Directory Listing
Modified Thu Jul 12 14:49:20 2018 UTC (5 years, 9 months ago) by guez

Move procedure read_serre from module read_serre_m to module
dynetat0_m, to avoid side effet on variables of module dynetat0_m.

Create procedure set_unit_nml to avoid side effect on variable of
module unit_nml_m.

Downgrade pctsrf from variable of module etat0_m to argument of etat0
and limit to avoid side effect on pctsrf.

Move variable zmasq from module dimphy to module phyetat0_m to avoid
side effect on zmasq.

Revision 149 - Directory Listing
Modified Thu Jun 18 12:23:44 2015 UTC (8 years, 10 months ago) by guez
Original Path: trunk/Sources/misc

In invert_zoom_x, call rtsafe instead of the equivalent coding that
was there. funcd needs to access a[0-4] and abs_y so we upgrade a[0-4]
from arguments of coefpoly to variables of module coefpoly_m and abs_y
from local variable of invert_zoom_x to private variable of module
invert_zoom_x_m.

Removed unused arguments t10m and q10m of hbtm.

Revision 147 - Directory Listing
Modified Wed Jun 17 14:20:14 2015 UTC (8 years, 10 months ago) by guez
Original Path: trunk/Sources/misc

In procedure fxhyp, instead of computing twice the integral of F,
store it the first time: ffdx becomes an array and we do not need xxpr
any longer. The storage is the same, there is less computation.

In procedure grid_noro, instead of storing the non-smoothed orography
in a temporary array zmea0, compute zphi earlier.

Revision 145 - Directory Listing
Modified Tue Jun 16 15:23:29 2015 UTC (8 years, 10 months ago) by guez
Original Path: trunk/Sources/misc
Copied from: trunk/Sources/bibio revision 144

Renamed bibio to misc.

In procedure fxhyp, use the fact that xf is an odd function of xtild.

In procedure invert_zoom_x, replace linear search in xf by
bisection. Also, use result from previous loop iteration as initial
guess. Variable "it" cannot be equal to 2 * nmax after search.

Unused arguments: hm of cv3_feed; ph, qnk, tv,tvp of cv3_mixing; ppsol
of lw; rconst, temp of vdif_kcay; rconst, plev, temp, ustar, l_mix of
yamada.

Revision 144 - Directory Listing
Modified Wed Jun 10 16:46:46 2015 UTC (8 years, 10 months ago) by guez
Original Path: trunk/Sources/bibio

In procedure fxhyp, the convoluted computation of tanh(fa/fb) occurred
three times. Extracted it into a function. Also, the computation of
xmoy and fxm was repeated. So stored the values in arrays instead.

In procedure fxhyp, in the computation of fhyp, there were tests
xtild(i) == 0. and xtild(i) == pi_d. No use to do these tests at each
iteration. We now they are true for i == nmax and i == 2 * nmax,
respectively, and we know they are false for other values of
"i". Similarly, in the computations of ffdx and xxpr, there were the
tests xmoy == 0. and xmoy == pi_d, these could not be true.

Moved files from bibio to dyn3d, following LMDZ.

Revision 139 - Directory Listing
Modified Tue May 26 17:46:03 2015 UTC (8 years, 10 months ago) by guez
Original Path: trunk/Sources/bibio

dynetat0 read rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d from
"start.nc" and then these variables were overwritten by
inigeom. Corrected this. Now, inigeom does not compute rlonu, rlatu,
rlonv and rlatv. Moreover, cu_2d, cv_2d, aire_2d are not written to
"restart.nc". Since xprimu, xprimv, xprimm025, xprimp025, rlatu1,
rlatu2, yprimu1, yprimu2 are computed at the same time as rlonu,
rlatu, rlonv, rlatv, and since it would not be convenient to separate
those computations, we decide to write xprimu, xprimv, xprimm025,
xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 into "restart.nc", read
them from "start.nc" and not compute them in inigeom. So, in summary,
"start.nc" contains all the coordinates and their derivatives, and
inigeom only computes the 2D-variables.

Technical details:

Moved variables rlatu, rlonv, rlonu, rlatv, xprimu, xprimv from module
comgeom to module dynetat0_m. Upgraded local variables rlatu1,
yprimu1, rlatu2, yprimu2, xprimm025, xprimp025 of procedure inigeom to
variables of module dynetat0_m.

Removed unused local variable yprimu of procedure inigeom and
corresponding argument yyprimu of fyhyp.

Moved variables clat, clon, grossismx, grossismy, dzoomx, dzoomy,
taux, tauy from module serre to module dynetat0_m (since they are read
from "start.nc"). The default values are now defined in read_serre
instead of in the declarations. Changed name of module serre to
read_serre_m, no more module variable here.

The calls to fxhyp and fyhyp are moved from inigeom to etat0.

Side effects in programs other than gcm: etat0 and read_serre write
variables of module dynetat0; the programs test_fxyp and
test_inter_barxy need more source files.

Removed unused arguments len and nd of cv3_tracer. Removed unused
argument PPSOL of LWU.

Bug fix in test_inter_barxy: forgotten call to read_serre.

Revision 138 - Directory Listing
Modified Fri May 22 23:13:19 2015 UTC (8 years, 10 months ago) by guez
Original Path: trunk/Sources/bibio

Moved variable nb_files from module histcom_var to module
histbeg_totreg_m.

Removed unused argument q of writehist.

No history file is created in program ce0l so there is no need to call
histclo in etat0.

In phyredem, access variables rlat and rlon directly from module
phyetat0_m instead of having them as arguments. This is clearer for
the program gcm. There are bad side effects for the program ce0l: we
have to modify the module variables rlat and rlon in procedure etat0,
and we need the additional file phyetat0.f to compile ce0l.

Revision 129 - Directory Listing
Modified Fri Feb 13 18:22:38 2015 UTC (9 years, 2 months ago) by guez
Original Path: trunk/bibio

Removed arguments day0, anne0 of procedures initdynav and
inithist. Use directly day_ref, annee_ref instead.

Moved variables annee_ref, day_ref of module temps to module
dynetat0_m. Deleted variables dayref and anneeref of module conf_gcm_m
and removed them from namelist conf_gcm_nml. These variables were
troubling intermediary on the way to annee_ref and day_ref. Gave as
default values to annee_ref and day_ref the default values of dayref
and anneeref. Moved the test on raz_date from main unit gcm to
procedure dynetat0. Created namelist dynetat0_nml. Read annee_ref and
day_ref from standard input in dynetat0 and redefine them from
"start.nc" if not raz_date. Rationale: 1 - Choose the best programming
from the point of view of program gcm only, forgetting program ce0l. 2
- The normal case is to define annee_ref and day_ref from "start.nc"
so put them in module dynetat0_m rather than in conf_gcm_m. 3 - Try to
always read the same namelists in the same order regardless of choices
in previous namelists. Downsides: 1 -We now need the file "dynetat0.f"
for the program ce0l, because dynetat0_m is used by dynredem0. 2 - We
need to define annee_ref and day_ref from procedure etat0.

Removed useless variable day_end of module temps.

Revision 115 - Directory Listing
Modified Fri Sep 19 17:36:20 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/bibio

Extracted code from tau2alpha for first call into new procedure
init_tau2alpha. dxdys, dxdyu, dxdyv are now local variables if guide
computed by init_tau2alpha. This allows us to remove terrible argument
type of tau2alpha: we just give to tau2alpha the right dxdy and
rlat.

In module conf_guide_m, changed default values of tau_min_*, because
0.02 is too small for the default daystep = 240, iperiod = 5. Changed
default values of guide_[uv] to false. Moved variable ok_guide from
conf_gcm_m to conf_guide_m, ok_guide is no longer an input parameter,
it is computed from guide_*. Had then to move test on ok_guide and
day_step from conf_gcm_m to conf_guide_m. Added checks on input
nudging parameters in procedure conf_guide. Upgraded variable factt to
module conf_guide_m in order to check nudging parameters. Bug fix:
variable guide_q was not in namelist conf_guide_nml.

Removed unused variables aire_min, aire_max of MODULE guide_m.

Moved the call to conf_guide from guide to gcm. This was needed to
define ok_guide before getting into guide (since ok_guide is no longer
in conf_gcm_m). Moved test on grossismx and grossismy from tau2alpha
to guide. It is clearer now that only tau_max is used for a regular
grid, and we do not have to repeat this test in each call to
tau2alpha. In guide, we only call writefield when alpha is not a
constant.

Revision 113 - Directory Listing
Modified Thu Sep 18 19:56:46 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/bibio

Moved the call to read_serre out of conf_gcm so that it can be called
only in the program ce0l, not in gcm. In gcm, variables of module
serre are read from start file. Added reading of dzoomx, dzoomy, taux,
tauy from start file, in dynetat0. Those variables were written by
dynredem0 but not read.

Removed possibility fxyhypb = false, because the geometric part of the
program is such a mess. Could then remove variables transx, transy,
alphax, alphay, pxo, pyo of module serre.

Bug fix in tau2alpha: missing save attributes. The first call to
tau2alpha needs to compute dxdyu and dxdyv regardless of value of
argument type, because they will be needed for subsequent calls to
tau2alpha with various values of argument type.

Revision 110 - Directory Listing
Modified Wed Sep 17 11:55:05 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/bibio

Moved variables of module write_field to module
createnewfield_m. Deleted module variable varid because we know that
varid is always 1. Module variable record was modified in 2 procedures
so Moved assignment:

Record(NbField) = 1

to writefield.

Revision 109 - Directory Listing
Modified Wed Sep 17 10:08:00 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/bibio

Moved a call to writefield from guide to tau2alpha. (dxdys does not
change with itau.) So dxdys does not need to be a module variable any
longer. Other variables of modules tau2alpha_m downgraded to local
variables of tau2alpha, since they were not used elsewhere.

Procedures write_field[13]d and formcoord were never called. Could
then remove int2str.

Inline writefield_gen into writefield.

CreateNewField takes an integer array argument instead of 3 scalar
integers. CreateNewField now creates a number of dimensions adapted to
the rank of the output field, instead of always 4 dimensions.

Changed names of variables of module write_field: fieldid to
ncid, fieldindex to record, fieldvarid to varid.

In writefield_gen, if index == -1, no need to call GetFieldIndex
again, we know that the result is nbfield.

In guide, moved calls to writefield for some variables inside if
first_call: those variables do not change with time. Removed ztau:
computed only to be output, does not seem meaningful. Removed
writefield for aire: does not change with time and is already in
"grilles_gcm.nc".

Revision 108 - Directory Listing
Modified Tue Sep 16 14:00:41 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/bibio

Imported writefield from LMDZ. Close at the end of gcm the files which
were created by writefiled (not done in LMDZ).

Removed procedures for the output of Grads files. Removed calls to
dump2d. In guide, replaced calls to wrgrads by calls to writefield.

In vlspltqs, removed redundant programming of saturation
pressure. Call foeew from module FCTTRE instead.

Bug fix in interpre: size of w exceeding size of correponding actual
argument wg in advtrac.

In leapfrog, call guide until the end of the run, instead of six hours
before the end.

Bug fix in readsulfate_preind: type of arguments.

Revision 107 - Directory Listing
Modified Thu Sep 11 15:09:15 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/bibio

Imported procedure grilles_gcm_sub from LMDZ. Had then to transform
local variable phis of etat to argument.

Replaced calls to lnblnk by calls to trim.

Removed arguments nlat, klevel and griscal of filtreg. Replaced
integer arguments ifiltre and iaire by logical arguments direct and
intensive.

Changed default values of guide_t and guide_q to false.

Revision 104 - Directory Listing
Modified Thu Sep 4 10:05:52 2014 UTC (9 years, 7 months ago) by guez
Original Path: trunk/bibio

Removed procedure sortvarc0. Called sortvarc with an additional
argument resetvarc instead. (Following LMDZ.) Moved current time
computations and some printing statements from sortvarc to
caldyn. Could then remove arguments itau and time_0 of sortvarc, and
could remove "use dynetat0". Better to keep "dynetat0.f" as a gcm-only
file.

Moved some variables from module ener to module sortvarc.

Split file "mathelp.f" into single-procedure files.

Removed unused argument nadv of adaptdt. Removed dimension arguments
of bernoui.

Removed unused argument nisurf of interfoce_lim. Changed the size of
argument lmt_sst of interfoce_lim from klon to knon. Removed case when
newlmt is false.

dynredem1 is called only once in each run, either ce0l or gcm. So
variable nb in call to nf95_put_var was always 1. Removed variable nb.

Removed dimension arguments of calcul_fluxs. Removed unused arguments
precip_rain, precip_snow, snow of calcul_fluxs. Changed the size of
all the arrays in calcul_fluxs from klon to knon.

Removed dimension arguments of fonte_neige. Changed the size of all
the arrays in fonte_neige from klon to knon.

Changed the size of arguments tsurf and tsurf_new of interfsurf_hq
from klon to knon. Changed the size of argument ptsrf of soil from
klon to knon.

Revision 83 - Directory Listing
Modified Thu Mar 6 15:12:00 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/bibio

In procedure conf_guide, replaced calls to getpar by reading a
namelist. Removed file getparam.f, now unused. So getin of IOIPSL is
now unused too. Removed files getincom.f, getincom2.f, cmpblank.f,
find_sig.f, gensig.f and nocomma.f.

Moved variables lat_min_guide and lat_max_guide from module
tau2alpha_m to module conf_guide_m.

Removed variables nivsig and nivsigs of module disvert_m. Instead, in
initdynav and initfluxsto, directly wrote arithmetic sequence for
verical axis, pending a better vertical axis. Removed variables nivsig
and nivsigs of "(re)?.start.nc".

In procedure exner_hyb, replaced p(:, :, 1) by equivalent ps.

Revision 81 - Directory Listing
Modified Wed Mar 5 14:38:41 2014 UTC (10 years, 1 month ago) by guez
Original Path: trunk/bibio

 Converted to free source form files which were still in fixed source
form. The conversion was done using the polish mode of the NAG Fortran
Compiler.

In addition to converting to free source form, the processing of the
files also:

-- indented the code (including comments);

-- set Fortran keywords to uppercase, and set all other identifiers
to lower case;

-- added qualifiers to end statements (for example "end subroutine
conflx", instead of "end");

-- changed the terminating statements of all DO loops so that each
loop ends with an ENDDO statement (instead of a labeled continue).

Revision 70 - Directory Listing
Modified Mon Jun 24 15:39:52 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/libf/bibio

In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.

In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".

Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".

In "hgardfou", print only the first temperature out of range found.

Revision 69 - Directory Listing
Modified Mon Feb 18 16:33:12 2013 UTC (11 years, 2 months ago) by guez
Original Path: trunk/libf/bibio

Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from
module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and
rad_chau2 from module nuagecom to module conf_phys_m.

Read clesphys2_nml from conf_phys instead of gcm.

Removed argument iflag_con from several procedures. Access module
variable instead.

Revision 62 - Directory Listing
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 8 months ago) by guez
Original Path: trunk/libf/bibio

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 61 - Directory Listing
Modified Fri Apr 20 14:58:43 2012 UTC (12 years ago) by guez
Original Path: trunk/libf/bibio

No more included file in LMDZE, not even "netcdf.inc".

Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.

Split module "histcom". Assembled resulting files in directory
"Histcom".

Removed aliasing in calls to "laplacien".

Revision 57 - Directory Listing
Modified Mon Jan 30 12:54:02 2012 UTC (12 years, 2 months ago) by guez
Original Path: trunk/libf/bibio

Write used namelists to file "" instead of standard output.

Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad",
"gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate
dimension to arrays so they have rank 3, like the dummy arguments in
"divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot".

Extract the initialization part from "bilan_dyn" and make a separate
procedure, "init_dynzon", from it.

Move variables from modules "iniprint" and "logic" to module
"conf_gcm_m".

Promote internal procedures of "fxy" to private procedures of module
"fxy_m".

Extracted documentation from "inigeom". Removed useless "save"
attributes. Removed useless intermediate variables. Extracted
processing of poles from loop on latitudes. Write coordinates to file
"longitude_latitude.txt" instead of standard output.

Do not use ozone tracer for radiative transfer.

Revision 56 - Directory Listing
Modified Tue Jan 10 19:02:02 2012 UTC (12 years, 3 months ago) by guez
Original Path: trunk/libf/bibio

Imported "writehist.f" from LMDZ.

Moved module variable "histaveid" from "com_io_dyn" to "initdynav_m".

In "inithist", access directly module variables from "com_io_dyn"
instead of going through the arguments. Copying from LMDZ, write "u"
and scalar variables to separate files. Create a new variable for the
new file in "com_io_dyn". Copying from LMDZ, change the vertical axes
of the three files.

Removed some useless initializations in "dissip".

In "bilan_dyn", removed useless variable "time". Avoiding the
approximate test on "dt_cum" being a multiple of "dt_app", just
compute "ncum" from known usage of "bilan_dyn" and compute "dt_cum"
from "ncum". Change "periodav" from real to integer in
"conf_gcm_m". Since "day_step" is required to be a multiple of
"iperiod", so is "ncum".

Revision 52 - Directory Listing
Modified Fri Sep 23 12:28:01 2011 UTC (12 years, 6 months ago) by guez
Original Path: trunk/libf/bibio

Split "conflx.f" into single-procedure files in directory "Conflx".

Split "cv_routines.f" into single-procedure files in directory
"CV_routines". Made module "cvparam" from included file
"cvparam.h". No included file other than "netcdf.inc" left in LMDZE.

Revision 44 - Directory Listing
Modified Wed Apr 13 12:29:18 2011 UTC (13 years ago) by guez
Original Path: trunk/libf/bibio

Removed argument "pdteta" of "calfis", because it was not used.

Created module "conf_guide_m", containing procedure
"conf_guide". Moved module variables from "guide_m" to "conf_guide_m".

In module "getparam", removed "ini_getparam" and "fin_getparam" from
generic interface "getpar".

Created module variables in "tau2alpha_m" to replace common "comdxdy".

Revision 39 - Directory Listing
Modified Tue Jan 25 15:11:05 2011 UTC (13 years, 2 months ago) by guez
Original Path: trunk/libf/bibio

"pi" comes from "nr_util". Removed subroutine "initialize" in module
"comconst".

Copied the content of "fxy_sin.h" into "fxysinus", instead of getting
it from an "include" line. Removed file "fxy_sin.h".

"ps" has rank 2 in "gcm" and "dynetat0".

Assumed-shape for argument "q" of "integrd".

Revision 30 - Directory Listing
Modified Thu Apr 1 09:07:28 2010 UTC (14 years ago) by guez
Original Path: trunk/libf/bibio

Imported Source files of the external library "IOIPSL_Lionel" into
"libf/IOIPSL".

Split "cray.f90" into "scopy.f90" and "ssum.f90".

Rewrote "leapfrog" in order to have a clearer algorithmic structure.

Revision 28 - Directory Listing
Modified Fri Mar 26 18:33:04 2010 UTC (14 years ago) by guez
Original Path: trunk/libf/bibio

Removed unused "diagedyn.f" and "undefSTD.f".

In "etat0", the variable "dt" of module "temps" was defined from
"landicered.nc", which was meaningless and useless. Replaced "dt" by a
local trash variable.

Removed variable "dt" from module "temps" and created instead a local
variable of "leapfrog" and an argument of "integrd".

Revision 27 - Directory Listing
Modified Thu Mar 25 14:29:07 2010 UTC (14 years ago) by guez
Original Path: trunk/libf/bibio

"dyn3d" and "filtrez" do not contain any included file so make rules
have been updated.

"comdissip.f90" was useless, removed it.

"dynredem0" wrote undefined value in "controle(31)", that was
overwritten by "dynredem1". Now "dynredem0" just writes 0 to
"controle(31)".

Removed arguments of "inidissip". "inidissip" now accesses the
variables by use association.

In program "etat0_lim", "itaufin" is not defined so "dynredem1" wrote
undefined value to "controle(31)". Added argument "itau" of
"dynredem1" to correct that.

"itaufin" does not need to be a module variable (of "temps"), made it
a local variable of "leapfrog".

Removed calls to "diagedyn" from "leapfrog".

Revision 18 - Directory Listing
Modified Thu Aug 7 12:29:13 2008 UTC (15 years, 8 months ago) by guez
Original Path: trunk/libf/bibio

In module "regr_pr", rewrote scanning of horizontal positions as a
single set of loops, using a mask.

Added some "intent" attributes.

In "dynredem0", replaced calls to Fortran 77 interface of NetCDF by
calls to NetCDF95. Removed calls to "nf_redef", regrouped all writing
operations. In "dynredem1", replaced some calls to Fortran 77
interface of NetCDF by calls to Fortran 90 interface.

Renamed variable "nqmax" to "nq_phys".

In "physiq", if "nq >= 5" then "wo" is computed from the
parameterization of "Cariolle".

Revision 15 - Directory Listing
Modified Fri Aug 1 15:24:12 2008 UTC (15 years, 8 months ago) by guez
Original Path: trunk/libf/bibio

-- Minor modification of input/output:

Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not
modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1",
"ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4"
"mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from
"histrac.nc".

Variable "raz_date" of module "conf_gcm_m" has logical type instead of
integer type.

-- Should not change any result at run time:

Modified calls to "IOIPSL_Lionel" procedures because the interfaces of
these procedures have been simplified.

Changed name of variable in module "start_init_orog_m": "masque" to
"mask".

Created a module containing procedure "phyredem".

Removed arguments "punjours", "pdayref" and "ptimestep" of procedure
"iniphysiq".

Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created
procedure "gr_phy_write_3d".

Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev",
"calcul_divers".

Revision 13 - Directory Listing
Modified Fri Jul 25 19:59:34 2008 UTC (15 years, 8 months ago) by guez
Original Path: trunk/libf/bibio

-- Minor change of behaviour:

"etat0" does not compute "rugsrel" nor "radpas". Deleted arguments
"radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of
"phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In
"physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program
"etat0_lim" does not use "clesphys2".

-- Minor modification of input/output:

Created subroutine "read_clesphys2". Variables of "clesphys2" are read
in "read_clesphys2" instead of "conf_gcm". "printflag" does not print
variables of "clesphys2".

-- Should not change any result at run time:

References to module "numer_rec" instead of individual modules of
"Numer_rec_Lionel".

Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm",
"leapfrog", "phyetat0". Deleted variable "clesphy0" in
"gcm". "phyetat0" does not modify variables of "clesphys2".

The program unit "gcm" does not modify "itau_phy".

Added some "intent" attributes.

"regr11_lint" does not call "polint".

Revision 12 - Directory Listing
Modified Mon Jul 21 16:05:07 2008 UTC (15 years, 9 months ago) by guez
Original Path: trunk/libf/bibio

-- Minor modification of input/output:

Created procedure "read_logic". Variables of module "logic" are read
by "read_logic" instead of "conf_gcm". Variable "offline" of module
"conf_gcm" is read from namelist instead of "*.def".

Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0",
"tabcntr0" and local variables "radpas", "tab_cntrl" of
"phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any
longer. "phyetat0" now reads global attribute "itau_phy" from
"startphy.nc". "phyredem" does not create variable "controle" in
"startphy.nc" any longer. "phyredem" now writes global attribute
"itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of
"printflag". Removed diagnostic messages written by "printflag" for
comparison of the variable "controle" of "startphy.nc" and the
variables read from "*.def" or namelist input.

-- Removing unwanted functionality:

Removed variable "lunout" from module "iniprint", replaced everywhere
by standard output.

Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and
"physiq". Removed procedure "interfoce_cpl".

-- Should not change anything at run time:

Automated creation of graphs in documentation. More documentation on
input files.

Converted Fortran files to free format: "phyredem.f90", "printflag.f90".

Split module "clesphy" into "clesphys" and "clesphys2".

Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and
"statcl" from module "logic". Added arguments "conser" to "advect",
"leapf" to "integrd". Added local variables "forward", "leapf",
"apphys", "conser", "apdiss" in "leapfrog".

Added intent attributes.

Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh"
of "phytrac", "dt" of "yamada".

Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0",
"length", "tabcntr0" in "physiq". Replaced all references to "dtime"
by references to "pdtphys".

Revision 10 - Directory Listing
Modified Fri Apr 18 14:45:53 2008 UTC (16 years ago) by guez
Original Path: trunk/libf/bibio

Added NetCDF directory "/home/guez/include" in "g95.mk" and
"nag_tools.mk".

Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac",
"calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec",
"calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3",
"conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2",
"drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell".

Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo"
and messages for end of run from "abort_gcm" to "gcm"; replaced call
to "abort_gcm" in "leapfrog" by exit from outer loop.

In "calfis": removed argument "pp" and variable "unskap"; changed
"pksurcp" from scalar to rank 2; use "pressure_var"; rewrote
computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy";
added computation of "pls".

Removed unused variable in "dynredem0".

In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call
to "ssum" by call to "sum"; removed variables "xpn" and "xps";
replaced some loops by array expressions.

In "leapfrog": use "pressure_var"; deleted variables "p", "longcles".

Converted common blocks "YOECUMF", "YOEGWD" to modules.

Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr".

Created module "raddimlw" from include file "raddimlw.h".

Corrected call to "new_unit" in "test_disvert".

	ViewVC Help
Powered by ViewVC 1.1.21