[lmdze] Log of /trunk/phylmd/Interface

Revision 102 - Directory Listing
Modified Tue Jul 15 13:43:24 2014 UTC (9 years, 10 months ago) by guez

Removed unused file "condsurf.f" (only useful for ocean slab).

day_step must be a multiple of 4 * iperiod if ok_guide.

Changed type of variable online of module conf_guide_m from integer to
logical. Value -1 was not useful, equivalent to not ok_guide.

Removed argument masse of procedure guide. masse is kept consistent
with ps throughout the run. masse need only be computed again just
after ps has been modified. In prodecure guide, replaced use of
remanent variable first by test on itau. Replaced test on variable
"test" by test on integer values.

In leapfrog, for the call to guide, replaced test on real values by
test on integer values.

Bug fix in tau2alpha: computation of dxdyv (following LMDZ revision 1040).

In procedure wrgrads, replaced badly chosen argument name "if" by i_f.

Revision 101 - Directory Listing
Modified Mon Jul 7 17:45:21 2014 UTC (9 years, 10 months ago) by guez

Removed unused files "interfoce_slab.f" and "gath2cpl.f". Removed
unused variables coastalflow and riverflow of module
interface_surf. Removed unused arguments cal, radsol, dif_grnd,
fluxlat, fluxsens, dflux_s, dflux_l of procedure fonte_neige. Removed
unused arguments tslab, seaice of procedure interfsurf_hq and
clqh. Removed unused arguments seaice of procedure clmain.

In interfsurf_hq, used variable soil_model of module clesphys2 instead
of cascading it as an argument from physiq.

In phyetat0, stop if masque not found.

Variable TS instead of "TS[0-9][0-9]" in "(re)startphy.nc", with
additional dimension nbsrf.

Revision 100 - Directory Listing
Modified Wed Jul 2 19:07:58 2014 UTC (9 years, 10 months ago) by guez

Removed unused variable tmp_rlic of module interface_surf.

Removed useless call to gath2cpl in procedure interfsurf_hq. Removed
then uncalled procedure gath2cpl.

Revision 99 - Directory Listing
Modified Wed Jul 2 18:39:15 2014 UTC (9 years, 10 months ago) by guez

Created procedure test_disvert (following LMDZ). Added procedures
hybrid and funcd in module disvert_m. Upgraded compute_ab from
internal procedure of disvert to module procedure. Added variables y,
ya in module disvert_m. Upgraded s from local variable of procedure
disvert to module variable.

Renamed allowed value of variable vert_sampling in procedure disvert
from "read" to "read_hybrid". Added possibility to read pressure
values, value "read_pressure". Replaced vertical distribution for
value "param" by the distribution "strato_correct" from LMDZ (but kept
the value "param"). In case "tropo", replaced 1 by dsigmin (following
LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ).

Changed computation of bp in procedure compute_ab.

Removed debugindex case in clmain. Removed useless argument rlon of
procedure clmain. Removed useless variables ytaux, ytauy of procedure
clmain.

Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure
etat0.

Removed variable ok_veget:. coupling with the model Orchid is not
possible. Removed variable ocean: modeling an ocean slab is not
possible.

Removed useless variables tmp_rriv and tmp_rcoa from module
interface_surf.

Moved initialization of variables da, mp, phi in procedure physiq to
to inside the test iflag_con >= 3.

Revision 98 - Directory Listing
Modified Tue May 13 17:23:16 2014 UTC (10 years ago) by guez

Split inter_barxy.f : one procedure per module, one module per
file. Grouped the files into a directory.

Split orbite.f.

Value of raz_date read from the namelist is taken into account
(resetting the step counter) even if annee_ref == anneeref and day_ref
== dayref. raz_date is no longer modified by gcm main unit. (Following
LMDZ.)

Removed argument klon of interfsur_lim. Renamed arguments lmt_alb,
lmt_rug to alb_new, z0_new (same name as corresponding actual
arguments in interfsurf_hq).

Removed argument klon of interfsurf_hq.

Removed arguments qs and d_qs of diagetpq. Were always
zero. Downgraded arguments d_qw, d_ql of diagetpq to local variables,
they were not used in physiq. Removed all computations for solid water
in diagetpq, was just zero.


Downgraded arguments fs_bound, fq_bound of diagphy to local variables,
they were not used in physiq. Encapsulated in a test on iprt all
computations in diagphy.

Removed parameter nbtr of module dimphy. Replaced it everywhere in the
program by nqmx - 2.

Removed parameter rnpb of procedure physiq. Kept the true case in
physiq and phytrac. Could not work with false case anyway.

Removed arguments klon, llm, airephy of qcheck. Removed argument ftsol
of initrrnpb, was not used.

Revision 72 - Directory Listing
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/libf/phylmd/Interface_surf

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

Revision 62 - Directory Listing
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 9 months ago) by guez
Original Path: trunk/libf/phylmd/Interface_surf

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 61 - Directory Listing
Modified Fri Apr 20 14:58:43 2012 UTC (12 years ago) by guez
Original Path: trunk/libf/phylmd/Interface_surf

No more included file in LMDZE, not even "netcdf.inc".

Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.

Split module "histcom". Assembled resulting files in directory
"Histcom".

Removed aliasing in calls to "laplacien".

Revision 54 - Directory Listing
Added Tue Dec 6 15:07:04 2011 UTC (12 years, 5 months ago) by guez
Original Path: trunk/libf/phylmd/Interface_surf

Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1"
in "inidissip" by calls to intrinsic procedures.

Split file "interface_surf.f90" into a file with a module containing
only variables, "interface_surf", and single-procedure files. Gathered
files into directory "Interface_surf".

Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to
"divgrad2" and "divgrad", and "crot" to "nxgraro2" and
"nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot"
from module "inidissip_m", so it can pass them to "gradiv2",
etc. Thanks to this modification, we avoid a circular dependency
betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by
"gradiv2", for instance, during computation of eigenvalues is not the
value "cdivu" computed by "inidissip".

Extracted procedure "start_inter_3d" from module "startdyn", to its
own module.

In "inidissip", unrolled loop on "ii". I find it clearer now.

Moved variables "matriceun", "matriceus", "matricevn", "matricevs",
"matrinvn" and "matrinvs" from module "parafilt" to module
"inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu",
"jfiltsv" from module "coefils" to module "inifilr_m".

	ViewVC Help
Powered by ViewVC 1.1.21

Log of /trunk/phylmd/Interface_surf