Log of /trunk/phylmd/Interface_surf/interfoce_lim.f90
Parent Directory
| 
Revision Log
Revision
328 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Jun 13 14:40:06 2019 UTC
(4 years, 11 months ago)
by
guez
File length: 1122 byte(s)
Copied from:
trunk/phylmd/Interface_surf/interfoce_lim.f revision 327
Diff to
previous 254
Change all `.f` suffixes to `.f90`. (The opposite was done in revision
82.) Because of change of philosopy in GNUmakefile: we already had a
rewritten rule for `.f`, so it does not make the makefile longer to
replace it by a rule for `.f90`. And it spares us options of
makedepf90 and of the compiler. Also we prepare the way for a simpler
`CMakeLists.txt`.
Revision
221 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Apr 20 14:44:47 2017 UTC
(7 years, 1 month ago)
by
guez
Original Path:
trunk/Sources/phylmd/Interface_surf/interfoce_lim.f
File length: 1122 byte(s)
Diff to
previous 202
clcdrag is no longer used in LMDZ. Replaced by cdrag in LMDZ. In cdrag
in LMDZ, zxli is a symbolic constant, false. So removed case zxli true
in LMDZE.
read_sst is called zero (if no ocean point on the whole planet) time or
once per call of physiq. If mod(itap - 1, lmt_pas) == 0 then we have
advanced in time of lmt_pas and deja_lu is necessarily false.
qsat[sl] and dqsat[sl] were never called.
Added output of qsurf in histins, following LMDZ.
Last dummy argument dtime of phystokenc is always the same as first
dummy argument pdtphys, removed dtime.
Removed make rules for nag_xref95, since it does not exist any longer.
Revision
202 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Jun 8 12:23:41 2016 UTC
(7 years, 11 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/Interface_surf/interfoce_lim.f
File length: 1118 byte(s)
Diff to
previous 191
Promoted lmt_pas from local variable of physiq to variable of module
conf_gcm_m.
Removed variable run_off of module interface_surf. Was not
used. Called run_off_ter in LMDZ, but not used nor printed there
either.
Simplified logic in interfoce_lim. The way it was convoluted with
interfsurf_hq and clmain was quite a mess. Extracted reading of SST
into a separate procedure: read_sst. We do not need SST and pctsrf_new
at the same time: SST is not needed for sea-ice surface. I did not
like this programming: going through the procedure repeatedly for
different purposes and testing inside whether there was something to
do or it was already done. Reading is now only controlled by itap and
lmt_pas, instead of debut, jour, jour_lu and deja_lu. Now we do not
copy from pct_tmp to pctsrf_new every time step.
Simplified processing of pctsrf in clmain and below. It was quite
troubling: pctsrf_new was intent out in interfoce_lim but only defined
for ocean and sea-ice. Also the idea of having arrays for all
surfaces, pcsrf and pctsrf_new, in interfsurf_hq, which is called for
a particular surface, was troubling. pctsrf_new for all surfaces was
intent out in intefsurf_hq, but not defined for all surfaces at each
call. Removed argument pctsrf_new of clmain: was a duplicate of pctsrf
on output, and not used in physiq. Replaced pctsrf_new in clmain by
pctsrf_new_oce and pctsrf_new_sic, which were the only ones modified.
Revision
191 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon May 9 19:56:28 2016 UTC
(8 years ago)
by
guez
Original Path:
trunk/Sources/phylmd/Interface_surf/interfoce_lim.f
File length: 3179 byte(s)
Diff to
previous 178
Extracted the call to read_comdissnew out of conf_gcm.
Made ok_instan a variable of module clesphys, itau_phy a variable of
module phyetat0_m, nid_ins a variable of module ini_histins_m, itap a
variable of new module time_phylmdz, so that histwrite_phy can be
called from any procedure without the need to cascade those variables
into that procedure. Made itau_w a variable of module time_phylmdz so
that it is computed only once per time step of physics.
Extracted variables of module clesphys which were in namelist
conf_phys_nml into their own namelist, clesphys_nml, and created
procedure read_clesphys reading clesphys_nml, to avoid side effect.
No need for double precision in procedure getso4fromfile. Assume there
is a single variable for the whole year in the NetCDF file instead of
one variable per month.
Created generic procedure histwrite_phy and removed procedure
write_histins, following LMDZ. histwrite_phy has only two arguments,
can be called from anywhere, and should manage the logic of writing or
not writing into various history files with various operations. So the
test on ok_instan goes inside histwrite_phy.
Test for raz_date in phyetat0 instead of physiq to avoid side effect.
Created procedure increment_itap to avoid side effect.
Removed unnecessary differences between procedures readsulfate and
readsulfate_pi.
Revision
178 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Mar 11 18:47:26 2016 UTC
(8 years, 2 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/Interface_surf/interfoce_lim.f
File length: 3228 byte(s)
Diff to
previous 175
Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos,
buffer, regular from module histcom_var to modules where they are
defined.
Removed procedure ioipslmpp, useless for a sequential program.
Added argument datasz_max to histwrite_real (to avoid circular
dependency with histwrite).
Removed useless variables and computations everywhere.
Changed real litteral constants from default kind to double precision
in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu.
Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of
sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of
transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of
orosetup.
Added output of relative humidity.
Revision
175 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Feb 5 16:02:34 2016 UTC
(8 years, 3 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/Interface_surf/interfoce_lim.f
File length: 3346 byte(s)
Diff to
previous 134
Added argument itau_phy to ini_histins, phyetat0, phytrac and
phyredem0. Removed variable itau_phy of module temps. Avoiding side
effect in etat0 and phyetat0. The procedures ini_histins, phyetat0,
phytrac and phyredem0 are all called by physiq so there is no
cascading variable penalty.
In procedure inifilr, made the condition on colat0 weaker to allow for
rounding error.
Removed arguments flux_o, flux_g and t_slab of clmain, flux_o and
flux_g of clqh and interfsurf_hq, tslab and seaice of phyetat0 and
phyredem. NetCDF variables TSLAB and SEAICE no longer in
restartphy.nc. All these variables were related to the not-implemented
slab ocean. seaice and tslab were just set to 0 in phyetat0 and never
used nor changed. flux_o and flux_g were computed in clmain but never
used in physiq.
Removed argument swnet of clqh. Was used only to compute a local
variable, swdown, which was not used.
Revision
104 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Sep 4 10:05:52 2014 UTC
(9 years, 8 months ago)
by
guez
Original Path:
trunk/phylmd/Interface_surf/interfoce_lim.f
File length: 3444 byte(s)
Diff to
previous 82
Removed procedure sortvarc0. Called sortvarc with an additional
argument resetvarc instead. (Following LMDZ.) Moved current time
computations and some printing statements from sortvarc to
caldyn. Could then remove arguments itau and time_0 of sortvarc, and
could remove "use dynetat0". Better to keep "dynetat0.f" as a gcm-only
file.
Moved some variables from module ener to module sortvarc.
Split file "mathelp.f" into single-procedure files.
Removed unused argument nadv of adaptdt. Removed dimension arguments
of bernoui.
Removed unused argument nisurf of interfoce_lim. Changed the size of
argument lmt_sst of interfoce_lim from klon to knon. Removed case when
newlmt is false.
dynredem1 is called only once in each run, either ce0l or gcm. So
variable nb in call to nf95_put_var was always 1. Removed variable nb.
Removed dimension arguments of calcul_fluxs. Removed unused arguments
precip_rain, precip_snow, snow of calcul_fluxs. Changed the size of
all the arrays in calcul_fluxs from klon to knon.
Removed dimension arguments of fonte_neige. Changed the size of all
the arrays in fonte_neige from klon to knon.
Changed the size of arguments tsurf and tsurf_new of interfsurf_hq
from klon to knon. Changed the size of argument ptsrf of soil from
klon to knon.
Revision
61 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Apr 20 14:58:43 2012 UTC
(12 years, 1 month ago)
by
guez
Original Path:
trunk/libf/phylmd/Interface_surf/interfoce_lim.f90
File length: 6963 byte(s)
Diff to
previous 54
No more included file in LMDZE, not even "netcdf.inc".
Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.
Split module "histcom". Assembled resulting files in directory
"Histcom".
Removed aliasing in calls to "laplacien".
Revision
54 -
(
view)
(
annotate)
-
[select for diffs]
Added
Tue Dec 6 15:07:04 2011 UTC
(12 years, 5 months ago)
by
guez
Original Path:
trunk/libf/phylmd/Interface_surf/interfoce_lim.f90
File length: 6953 byte(s)
Removed Numerical Recipes procedure "ran1". Replaced calls to "ran1"
in "inidissip" by calls to intrinsic procedures.
Split file "interface_surf.f90" into a file with a module containing
only variables, "interface_surf", and single-procedure files. Gathered
files into directory "Interface_surf".
Added argument "cdivu" to "gradiv" and "gradiv2", "cdivh" to
"divgrad2" and "divgrad", and "crot" to "nxgraro2" and
"nxgrarot". "dissip" now uses variables "cdivu", "cdivh" and "crot"
from module "inidissip_m", so it can pass them to "gradiv2",
etc. Thanks to this modification, we avoid a circular dependency
betwwen "inidissip.f90" and "gradiv2.f90", etc. The value -1. used by
"gradiv2", for instance, during computation of eigenvalues is not the
value "cdivu" computed by "inidissip".
Extracted procedure "start_inter_3d" from module "startdyn", to its
own module.
In "inidissip", unrolled loop on "ii". I find it clearer now.
Moved variables "matriceun", "matriceus", "matricevn", "matricevs",
"matrinvn" and "matrinvs" from module "parafilt" to module
"inifilr_m". Moved variables "jfiltnu", "jfiltnv", "jfiltsu",
"jfiltsv" from module "coefils" to module "inifilr_m".
This form allows you to request diffs between any two revisions of this file.
For each of the two "sides" of the diff,
enter a numeric revision.
