--- trunk/Sources/phylmd/Interface_surf/interfsurf_hq.f 2015/11/25 20:14:19 174 +++ trunk/phylmd/Interface_surf/interfsurf_hq.f 2018/08/02 15:55:01 300 @@ -4,13 +4,11 @@ contains - SUBROUTINE interfsurf_hq(itime, dtime, jour, rmu0, nisurf, knon, knindex, & - pctsrf, rlat, debut, nsoilmx, tsoil, qsol, u1_lay, v1_lay, temp_air, & - spechum, tq_cdrag, petAcoef, peqAcoef, petBcoef, peqBcoef, & - precip_rain, precip_snow, fder, rugos, rugoro, snow, qsurf, tsurf, & - p1lay, ps, radsol, evap, fluxsens, fluxlat, dflux_l, dflux_s, & - tsurf_new, albedo, z0_new, pctsrf_new, agesno, fqcalving, ffonte, & - run_off_lic_0, flux_o, flux_g) + SUBROUTINE interfsurf_hq(julien, mu0, nisurf, knindex, debut, tsoil, qsol, & + u1_lay, v1_lay, temp_air, spechum, tq_cdrag, tAcoef, qAcoef, tBcoef, & + qBcoef, precip_rain, precip_snow, rugos, rugoro, snow, qsurf, ts, & + p1lay, ps, radsol, evap, flux_t, fluxlat, dflux_l, dflux_s, tsurf_new, & + albedo, z0_new, pctsrf_new_sic, agesno, fqcalving, ffonte, run_off_lic_0) ! Cette routine sert d'aiguillage entre l'atmosph\`ere et la surface ! en g\'en\'eral (sols continentaux, oc\'eans, glaces) pour les flux de @@ -20,162 +18,123 @@ USE abort_gcm_m, ONLY: abort_gcm use alboc_cd_m, only: alboc_cd - use alboc_m, only: alboc USE albsno_m, ONLY: albsno - use calbeta_m, only: calbeta USE calcul_fluxs_m, ONLY: calcul_fluxs - use clesphys2, only: soil_model, cycle_diurne USE dimphy, ONLY: klon USE fonte_neige_m, ONLY: fonte_neige - USE indicesol, ONLY: epsfra, is_lic, is_oce, is_sic, is_ter, nbsrf - USE interface_surf, ONLY: run_off, run_off_lic, conf_interface - USE interfoce_lim_m, ONLY: interfoce_lim + USE indicesol, ONLY: epsfra, is_lic, is_oce, is_sic, is_ter + USE conf_interface_m, ONLY: conf_interface USE interfsur_lim_m, ONLY: interfsur_lim + use limit_read_sst_m, only: limit_read_sst use soil_m, only: soil - USE suphec_m, ONLY: rcpd, rlstt, rlvtt, rtt + USE suphec_m, ONLY: rcpd, rtt - integer, intent(IN):: itime ! numero du pas de temps - real, intent(IN):: dtime ! pas de temps de la physique (en s) - integer, intent(IN):: jour ! jour dans l'annee en cours - real, intent(IN):: rmu0(klon) ! cosinus de l'angle solaire zenithal + integer, intent(IN):: julien ! jour dans l'annee en cours + real, intent(IN):: mu0(:) ! (knon) cosinus de l'angle solaire zenithal integer, intent(IN):: nisurf ! index de la surface a traiter - integer, intent(IN):: knon ! nombre de points de la surface a traiter integer, intent(in):: knindex(:) ! (knon) ! index des points de la surface a traiter - real, intent(IN):: pctsrf(klon, nbsrf) - ! tableau des pourcentages de surface de chaque maille - - real, intent(IN):: rlat(klon) ! latitudes - logical, intent(IN):: debut ! 1er appel a la physique ! (si false calcul simplifie des fluxs sur les continents) - integer, intent(in):: nsoilmx - REAL tsoil(klon, nsoilmx) + REAL, intent(inout):: tsoil(:, :) ! (knon, nsoilmx) - REAL, intent(INOUT):: qsol(klon) + REAL, intent(INOUT):: qsol(:) ! (knon) ! column-density of water in soil, in kg m-2 - real, dimension(klon), intent(IN):: u1_lay, v1_lay - ! u1_lay vitesse u 1ere couche - ! v1_lay vitesse v 1ere couche - real, dimension(klon), intent(IN):: temp_air, spechum - ! temp_air temperature de l'air 1ere couche - ! spechum humidite specifique 1ere couche - real, dimension(klon), intent(INOUT):: tq_cdrag - ! tq_cdrag cdrag - real, dimension(klon), intent(IN):: petAcoef, peqAcoef - ! petAcoef coeff. A de la resolution de la CL pour t - ! peqAcoef coeff. A de la resolution de la CL pour q - real, dimension(klon), intent(IN):: petBcoef, peqBcoef - ! petBcoef coeff. B de la resolution de la CL pour t - ! peqBcoef coeff. B de la resolution de la CL pour q - - real, intent(IN):: precip_rain(klon) - ! precipitation, liquid water mass flux (kg/m2/s), positive down - - real, intent(IN):: precip_snow(klon) - ! precipitation, solid water mass flux (kg/m2/s), positive down - - REAL, INTENT(INOUT):: fder(klon) ! derivee des flux (pour le couplage) - real, intent(IN):: rugos(klon) ! rugosite - real, intent(IN):: rugoro(klon) ! rugosite orographique - real, intent(INOUT):: snow(klon), qsurf(klon) - real, intent(IN):: tsurf(:) ! (knon) temp\'erature de surface - real, dimension(klon), intent(IN):: p1lay - ! p1lay pression 1er niveau (milieu de couche) - real, dimension(klon), intent(IN):: ps - ! ps pression au sol - REAL, DIMENSION(klon), INTENT(INOUT):: radsol - ! radsol rayonnement net aus sol (LW + SW) - real, intent(INOUT):: evap(klon) ! evaporation totale - real, dimension(klon), intent(OUT):: fluxsens, fluxlat - ! fluxsens flux de chaleur sensible - ! fluxlat flux de chaleur latente - real, dimension(klon), intent(OUT):: dflux_l, dflux_s - real, intent(OUT):: tsurf_new(knon) ! temp\'erature au sol + real, intent(IN):: u1_lay(:), v1_lay(:) ! (knon) vitesse 1ere couche + + real, intent(IN):: temp_air(:) ! (knon) temperature de l'air 1ere couche + real, intent(IN):: spechum(:) ! (knon) humidite specifique 1ere couche + real, intent(IN):: tq_cdrag(:) ! (knon) coefficient d'echange + + real, intent(IN):: tAcoef(:), qAcoef(:) ! (knon) + ! coefficients A de la r\'esolution de la couche limite pour t et q + + real, intent(IN):: tBcoef(:), qBcoef(:) ! (knon) + ! coefficients B de la r\'esolution de la couche limite pour t et q + + real, intent(IN):: precip_rain(:) ! (knon) + ! precipitation, liquid water mass flux (kg / m2 / s), positive down + + real, intent(IN):: precip_snow(:) ! (knon) + ! precipitation, solid water mass flux (kg / m2 / s), positive down + + real, intent(IN):: rugos(:) ! (knon) rugosite + real, intent(IN):: rugoro(:) ! (knon) rugosite orographique + real, intent(INOUT):: snow(:) ! (knon) + real, intent(OUT):: qsurf(:) ! (knon) + real, intent(IN):: ts(:) ! (knon) temp\'erature de surface + real, intent(IN):: p1lay(:) ! (knon) pression 1er niveau (milieu de couche) + real, intent(IN):: ps(:) ! (knon) pression au sol + REAL, INTENT(IN):: radsol(:) ! (knon) rayonnement net au sol (LW + SW) + real, intent(OUT):: evap(:) ! (knon) evaporation totale + + real, intent(OUT):: flux_t(:) ! (knon) flux de chaleur sensible + ! (Cp T) à la surface, positif vers le bas, W / m2 + + real, intent(OUT):: fluxlat(:) ! (knon) flux de chaleur latente + real, intent(OUT):: dflux_l(:), dflux_s(:) ! (knon) + real, intent(OUT):: tsurf_new(:) ! (knon) temp\'erature au sol real, intent(OUT):: albedo(:) ! (knon) albedo - real, intent(OUT):: z0_new(klon) ! surface roughness - real, dimension(klon, nbsrf), intent(OUT):: pctsrf_new - ! pctsrf_new nouvelle repartition des surfaces - real, dimension(klon), intent(INOUT):: agesno - - ! Flux d'eau "perdue" par la surface et n\'ecessaire pour que limiter la - ! hauteur de neige, en kg/m2/s - !jld a rajouter real, dimension(klon), intent(INOUT):: fqcalving - real, dimension(klon), intent(INOUT):: fqcalving - - ! Flux thermique utiliser pour fondre la neige - !jld a rajouter real, dimension(klon), intent(INOUT):: ffonte - real, dimension(klon), intent(INOUT):: ffonte + real, intent(OUT):: z0_new(:) ! (knon) surface roughness - real, dimension(klon), intent(INOUT):: run_off_lic_0 - ! run_off_lic_0 runoff glacier du pas de temps precedent + real, intent(in):: pctsrf_new_sic(:) ! (knon) + ! nouvelle repartition des surfaces - !IM: "slab" ocean - real, dimension(klon), intent(OUT):: flux_o, flux_g + real, intent(INOUT):: agesno(:) ! (knon) - ! Local: + real, intent(OUT):: fqcalving(:) ! (knon) + ! Flux d'eau "perdue" par la surface et n\'ecessaire pour limiter la + ! hauteur de neige, en kg / m2 / s + + real, intent(OUT):: ffonte(:) ! (knon) + ! flux thermique utilis\'e pour fondre la neige - REAL, dimension(klon):: soilcap - REAL, dimension(klon):: soilflux + real, intent(INOUT):: run_off_lic_0(:) ! (knon) + ! run_off_lic_0 runoff glacier du pas de temps precedent - !IM: "slab" ocean - real, parameter:: t_grnd=271.35 - integer i - - character (len = 20), save:: modname = 'interfsurf_hq' - character (len = 80):: abort_message - logical, save:: first_call = .true. - integer:: ii - real, dimension(klon):: cal, beta, dif_grnd, capsol - real, parameter:: calice=1.0/(5.1444e6 * 0.15), tau_gl=86400. * 5. - real, parameter:: calsno=1./(2.3867e6 * 0.15) - real tsurf_temp(knon) - real alb_neig(knon) - real zfra(knon) + ! Local: + integer knon ! nombre de points de la surface a traiter + REAL soilcap(size(knindex)) ! (knon) + REAL soilflux(size(knindex)) ! (knon) + logical:: first_call = .true. + integer ii + real cal(size(knindex)) ! (knon) + real beta(size(knindex)) ! (knon) evap reelle + real tsurf(size(knindex)) ! (knon) + real alb_neig(size(knindex)) ! (knon) + real zfra(size(knindex)) ! (knon) + REAL, PARAMETER:: fmagic = 1. ! facteur magique pour r\'egler l'alb\'edo + REAL, PARAMETER:: max_eau_sol = 150. ! in kg m-2 + REAL, PARAMETER:: tau_gl = 86400. * 5. !------------------------------------------------------------- - ! On doit commencer par appeler les schemas de surfaces continentales - ! car l'ocean a besoin du ruissellement qui est y calcule + knon = size(knindex) + + ! On doit commencer par appeler les sch\'emas de surfaces + ! continentales car l'oc\'ean a besoin du ruissellement. if (first_call) then call conf_interface + if (nisurf /= is_ter .and. klon > 1) then - print *, ' Warning:' print *, ' nisurf = ', nisurf, ' /= is_ter = ', is_ter - print *, 'or on doit commencer par les surfaces continentales' - abort_message='voir ci-dessus' - call abort_gcm(modname, abort_message) + call abort_gcm("interfsurf_hq", & + 'On doit commencer par les surfaces continentales.') endif + if (is_oce > is_sic) then - print *, 'Warning:' - print *, ' Pour des raisons de sequencement dans le code' - print *, ' l''ocean doit etre traite avant la banquise' - print *, ' or is_oce = ', is_oce, '> is_sic = ', is_sic - abort_message='voir ci-dessus' - call abort_gcm(modname, abort_message) + print *, 'is_oce = ', is_oce, '> is_sic = ', is_sic + call abort_gcm("interfsurf_hq", & + "L'oc\'ean doit \^etre trait\'e avant la banquise.") endif - endif - first_call = .false. - ! Initialisations diverses - - ffonte(1:knon)=0. - fqcalving(1:knon)=0. - cal = 999999. - beta = 999999. - dif_grnd = 999999. - capsol = 999999. - z0_new = 999999. - tsurf_new = 999999. - - !IM: "slab" ocean; initialisations - flux_o = 0. - flux_g = 0. + first_call = .false. + endif ! Aiguillage vers les differents schemas de surface @@ -183,202 +142,98 @@ case (is_ter) ! Surface "terre", appel \`a l'interface avec les sols continentaux - ! allocation du run-off - if (.not. allocated(run_off)) then - allocate(run_off(knon)) - run_off = 0. - else if (size(run_off) /= knon) then - call abort_gcm(modname, 'Something is wrong: the number of ' & - // 'continental points has changed since last call.') - endif - ! Calcul age de la neige ! Read albedo from the file containing boundary conditions then ! add the albedo of snow: - call interfsur_lim(itime, dtime, jour, knindex, debut, albedo, z0_new) + call interfsur_lim(julien, knindex, debut, albedo, z0_new) - ! Calcul snow et qsurf, hydrologie adapt\'ee - CALL calbeta(nisurf, snow(:knon), qsol(:knon), beta(:knon), & - capsol(:knon), dif_grnd(:knon)) - - IF (soil_model) THEN - CALL soil(dtime, nisurf, knon, snow, tsurf, tsoil, soilcap, soilflux) - cal(1:knon) = RCPD / soilcap(1:knon) - radsol(1:knon) = radsol(1:knon) + soilflux(:knon) - ELSE - cal = RCPD * capsol - ENDIF - - CALL calcul_fluxs(dtime, tsurf, p1lay(:knon), cal(:knon), & - beta(:knon), tq_cdrag(:knon), ps(:knon), qsurf(:knon), & - radsol(:knon), dif_grnd(:knon), temp_air(:knon), spechum(:knon), & - u1_lay(:knon), v1_lay(:knon), petAcoef(:knon), peqAcoef(:knon), & - petBcoef(:knon), peqBcoef(:knon), tsurf_new, evap(:knon), & - fluxlat(:knon), fluxsens(:knon), dflux_s(:knon), dflux_l(:knon)) - - CALL fonte_neige(nisurf, dtime, tsurf, p1lay(:knon), beta(:knon), & - tq_cdrag(:knon), ps(:knon), precip_rain(:knon), & - precip_snow(:knon), snow(:knon), qsol(:knon), temp_air(:knon), & - spechum(:knon), u1_lay(:knon), v1_lay(:knon), petAcoef(:knon), & - peqAcoef(:knon), petBcoef(:knon), peqBcoef(:knon), tsurf_new, & - evap(:knon), fqcalving(:knon), ffonte(:knon), run_off_lic_0(:knon)) - - call albsno(dtime, agesno(:knon), alb_neig, precip_snow(:knon)) - where (snow(:knon) < 0.0001) agesno(:knon) = 0. - zfra = max(0.0, min(1.0, snow(:knon)/(snow(:knon) + 10.0))) + beta = min(2. * qsol / max_eau_sol, 1.) + CALL soil(is_ter, snow, ts, tsoil, soilcap, soilflux) + cal = RCPD / soilcap + + CALL calcul_fluxs(ts, p1lay, cal, beta, tq_cdrag, ps, qsurf, & + radsol + soilflux, temp_air, spechum, u1_lay, v1_lay, tAcoef, & + qAcoef, tBcoef, qBcoef, tsurf_new, evap, fluxlat, flux_t, dflux_s, & + dflux_l, dif_grnd = 0.) + CALL fonte_neige(is_ter, precip_rain, precip_snow, snow, qsol, & + tsurf_new, evap, fqcalving, ffonte, run_off_lic_0) + + call albsno(agesno, alb_neig, precip_snow) + where (snow < 0.0001) agesno = 0. + zfra = max(0., min(1., snow / (snow + 10.))) albedo = alb_neig * zfra + albedo * (1. - zfra) z0_new = sqrt(z0_new**2 + rugoro**2) - - ! Remplissage des pourcentages de surface - pctsrf_new(:, nisurf) = pctsrf(:, nisurf) case (is_oce) - ! Surface "ocean" appel \`a l'interface avec l'oc\'ean - ! lecture conditions limites - call interfoce_lim(itime, dtime, jour, knindex, debut, tsurf_temp, & - pctsrf_new) + ! Surface "oc\'ean", appel \`a l'interface avec l'oc\'ean + ffonte = 0. + call limit_read_sst(julien, knindex, tsurf) cal = 0. beta = 1. - dif_grnd = 0. + call calcul_fluxs(tsurf, p1lay, cal, beta, tq_cdrag, ps, qsurf, radsol, & + temp_air, spechum, u1_lay, v1_lay, tAcoef, qAcoef, tBcoef, qBcoef, & + tsurf_new, evap, fluxlat, flux_t, dflux_s, dflux_l, dif_grnd = 0.) agesno = 0. - call calcul_fluxs(dtime, tsurf_temp, p1lay(:knon), & - cal(:knon), beta(:knon), tq_cdrag(:knon), ps(:knon), & - qsurf(:knon), radsol(:knon), dif_grnd(:knon), temp_air(:knon), & - spechum(:knon), u1_lay(:knon), v1_lay(:knon), petAcoef(:knon), & - peqAcoef(:knon), petBcoef(:knon), peqBcoef(:knon), & - tsurf_new, evap(:knon), fluxlat(:knon), fluxsens(:knon), & - dflux_s(:knon), dflux_l(:knon)) - fder = fder + dflux_s + dflux_l - - !IM: flux ocean-atmosphere utile pour le "slab" ocean - flux_o(:knon) = fluxsens(:knon) - evap(:knon) & - * merge(RLSTT, RLVTT, tsurf_new < RTT) - - ! Compute the albedo: - if (cycle_diurne) then - CALL alboc_cd(rmu0(knindex), albedo) - else - CALL alboc(jour, rlat(knindex), albedo) - endif - + albedo = alboc_cd(mu0) * fmagic z0_new = sqrt(rugos**2 + rugoro**2) + fqcalving = 0. case (is_sic) ! Surface "glace de mer" appel a l'interface avec l'ocean - ! ! lecture conditions limites - CALL interfoce_lim(itime, dtime, jour, knindex, debut, tsurf_new, & - pctsrf_new) - DO ii = 1, knon - tsurf_new(ii) = tsurf(ii) - IF (pctsrf_new(knindex(ii), nisurf) < EPSFRA) then - snow(ii) = 0.0 + IF (pctsrf_new_sic(ii) < EPSFRA) then + snow(ii) = 0. tsurf_new(ii) = RTT - 1.8 - IF (soil_model) tsoil(ii, :) = RTT - 1.8 + tsoil(ii, :) = RTT - 1.8 + else + tsurf_new(ii) = ts(ii) endif enddo - CALL calbeta(nisurf, snow(:knon), qsol(:knon), beta(:knon), & - capsol(:knon), dif_grnd(:knon)) - - IF (soil_model) THEN - CALL soil(dtime, nisurf, knon, snow, tsurf_new, tsoil, soilcap, & - soilflux) - cal(1:knon) = RCPD / soilcap(1:knon) - radsol(1:knon) = radsol(1:knon) + soilflux(1:knon) - dif_grnd = 0. - ELSE - dif_grnd = 1.0 / tau_gl - cal = RCPD * calice - WHERE (snow > 0.0) cal = RCPD * calsno - ENDIF - tsurf_temp = tsurf_new - beta = 1.0 - - CALL calcul_fluxs(dtime, tsurf_temp, p1lay(:knon), cal(:knon), & - beta(:knon), tq_cdrag(:knon), ps(:knon), qsurf(:knon), & - radsol(:knon), dif_grnd(:knon), temp_air(:knon), spechum(:knon), & - u1_lay(:knon), v1_lay(:knon), petAcoef(:knon), peqAcoef(:knon), & - petBcoef(:knon), peqBcoef(:knon), tsurf_new, evap(:knon), & - fluxlat(:knon), fluxsens(:knon), dflux_s(:knon), dflux_l(:knon)) - - !IM: flux entre l'ocean et la glace de mer pour le "slab" ocean - DO i = 1, knon - flux_g(i) = 0.0 - IF (cal(i) > 1e-15) flux_g(i) = (tsurf_new(i) - t_grnd) & - * dif_grnd(i) * RCPD / cal(i) - ENDDO - - CALL fonte_neige(nisurf, dtime, tsurf_temp, p1lay(:knon), beta(:knon), & - tq_cdrag(:knon), ps(:knon), precip_rain(:knon), & - precip_snow(:knon), snow(:knon), qsol(:knon), temp_air(:knon), & - spechum(:knon), u1_lay(:knon), v1_lay(:knon), petAcoef(:knon), & - peqAcoef(:knon), petBcoef(:knon), peqBcoef(:knon), tsurf_new, & - evap(:knon), fqcalving(:knon), ffonte(:knon), run_off_lic_0(:knon)) + CALL soil(is_sic, snow, tsurf_new, tsoil, soilcap, soilflux) + cal = RCPD / soilcap + tsurf = tsurf_new + beta = 1. + CALL calcul_fluxs(tsurf, p1lay, cal, beta, tq_cdrag, ps, qsurf, & + radsol + soilflux, temp_air, spechum, u1_lay, v1_lay, tAcoef, & + qAcoef, tBcoef, qBcoef, tsurf_new, evap, fluxlat, flux_t, dflux_s, & + dflux_l, dif_grnd = 1. / tau_gl) + CALL fonte_neige(is_sic, precip_rain, precip_snow, snow, qsol, & + tsurf_new, evap, fqcalving, ffonte, run_off_lic_0) ! Compute the albedo: - CALL albsno(dtime, agesno(:knon), alb_neig, precip_snow(:knon)) - WHERE (snow(:knon) < 0.0001) agesno(:knon) = 0. - zfra = MAX(0.0, MIN(1.0, snow(:knon)/(snow(:knon) + 10.0))) - albedo = alb_neig * zfra + 0.6 * (1.0 - zfra) + CALL albsno(agesno, alb_neig, precip_snow) + WHERE (snow < 0.0001) agesno = 0. + zfra = MAX(0., MIN(1., snow / (snow + 10.))) + albedo = alb_neig * zfra + 0.6 * (1. - zfra) - fder = fder + dflux_s + dflux_l - - ! 2eme appel a interfoce pour le cumul et le passage des flux a l'ocean - - z0_new = 0.002 - z0_new = SQRT(z0_new**2 + rugoro**2) + z0_new = SQRT(0.002**2 + rugoro**2) case (is_lic) - if (.not. allocated(run_off_lic)) then - allocate(run_off_lic(knon)) - run_off_lic = 0. - endif - ! Surface "glacier continentaux" appel a l'interface avec le sol - IF (soil_model) THEN - CALL soil(dtime, nisurf, knon, snow, tsurf, tsoil, soilcap, soilflux) - cal(1:knon) = RCPD / soilcap(1:knon) - radsol(1:knon) = radsol(1:knon) + soilflux(1:knon) - ELSE - cal = RCPD * calice - WHERE (snow > 0.0) cal = RCPD * calsno - ENDIF - beta = 1.0 - dif_grnd = 0.0 - - call calcul_fluxs(dtime, tsurf, p1lay(:knon), cal(:knon), & - beta(:knon), tq_cdrag(:knon), ps(:knon), qsurf(:knon), & - radsol(:knon), dif_grnd(:knon), temp_air(:knon), spechum(:knon), & - u1_lay(:knon), v1_lay(:knon), petAcoef(:knon), peqAcoef(:knon), & - petBcoef(:knon), peqBcoef(:knon), tsurf_new, evap(:knon), & - fluxlat(:knon), fluxsens(:knon), dflux_s(:knon), dflux_l(:knon)) - - call fonte_neige(nisurf, dtime, tsurf, p1lay(:knon), beta(:knon), & - tq_cdrag(:knon), ps(:knon), precip_rain(:knon), & - precip_snow(:knon), snow(:knon), qsol(:knon), temp_air(:knon), & - spechum(:knon), u1_lay(:knon), v1_lay(:knon), petAcoef(:knon), & - peqAcoef(:knon), petBcoef(:knon), peqBcoef(:knon), tsurf_new, & - evap(:knon), fqcalving(:knon), ffonte(:knon), run_off_lic_0(:knon)) + CALL soil(is_lic, snow, ts, tsoil, soilcap, soilflux) + cal = RCPD / soilcap + beta = 1. + call calcul_fluxs(ts, p1lay, cal, beta, tq_cdrag, ps, qsurf, & + radsol + soilflux, temp_air, spechum, u1_lay, v1_lay, tAcoef, & + qAcoef, tBcoef, qBcoef, tsurf_new, evap, fluxlat, flux_t, dflux_s, & + dflux_l, dif_grnd = 0.) + call fonte_neige(is_lic, precip_rain, precip_snow, snow, qsol, & + tsurf_new, evap, fqcalving, ffonte, run_off_lic_0) ! calcul albedo - CALL albsno(dtime, agesno(:knon), alb_neig, precip_snow(:knon)) - WHERE (snow(:knon) < 0.0001) agesno(:knon) = 0. + CALL albsno(agesno, alb_neig, precip_snow) + WHERE (snow < 0.0001) agesno = 0. albedo = 0.77 ! Rugosite z0_new = rugoro - - ! Remplissage des pourcentages de surface - pctsrf_new(:, nisurf) = pctsrf(:, nisurf) - case default print *, 'Index surface = ', nisurf - abort_message = 'Index surface non valable' - call abort_gcm(modname, abort_message) + call abort_gcm("interfsurf_hq", 'Index surface non valable') end select END SUBROUTINE interfsurf_hq