Log of /trunk/phylmd/Interface_surf/pbl_surface.f
Parent Directory
|
Revision Log
Revision
305 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Sep 11 11:08:38 2018 UTC
(5 years, 8 months ago)
by
guez
File length: 17636 byte(s)
Diff to
previous 304
,
to
selected 276
We want to keep the same variable names throughout procedures. In
pbl_surface, rain_fall and snow_fall were passed to clqh and became
precip_rain and precip_snow. Which name should we choose?
Precipitation normally refers to water in all phases. Rainfall and
snowfall seem to be more common names to distinguish liquid water and
snow. Cf. CF standard names. So change everywhere precip_rain to
rain_fall and precip_snow to snow_fall.
Revision
304 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Sep 6 15:51:09 2018 UTC
(5 years, 8 months ago)
by
guez
File length: 17652 byte(s)
Diff to
previous 303
,
to
selected 276
Variable fevap of physiq is not used. Remove it from physiq and from
the restart file. Remove the corresponding argument evap of
pbl_surface.
Use directly yqsurf instead of qairsol in pbl_surface.
Revision
303 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Sep 6 14:25:07 2018 UTC
(5 years, 8 months ago)
by
guez
File length: 17766 byte(s)
Diff to
previous 302
,
to
selected 276
In procedure coef_diff_turb, zlev(:, klev + 1) was defined and then
overwritten inside yamada4. Replaced the definition of zlev(:, klev +
1) in coef_diff_turb by the definition in yamada4. So zlev is now
"intent in" in yamada4.
Bug fix in pbl_surface. yq2 is only defined if iflag_pbl >= 6.
Revision
302 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Sep 6 13:19:51 2018 UTC
(5 years, 8 months ago)
by
guez
File length: 18009 byte(s)
Diff to
previous 301
,
to
selected 276
In procedure physiq, rename dsens and devap to dflux_t and dflux_q so
they correspond to arguments with the same name in pbl_surface. (In
LMDZ, dsens and devap are not used in physiq, the computation of fder
is done inside pbl_surface.)
Revision
301 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Aug 2 17:23:07 2018 UTC
(5 years, 9 months ago)
by
guez
File length: 18007 byte(s)
Diff to
previous 300
,
to
selected 276
Move the call to conf_interface up to physiq, so there is no need to
test first call inside pbl_surface for this.
run_off_lic in fonte_neige was computed but not used. Pass it up to
pbl_surface so we can output it (following LMDZ).
Simplify the logic in interfsur_lim so we do not need debut.
Remove the tests on the order of surface types in interfsurf_hq. Just
add comments in indicesol.
Revision
300 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Aug 2 15:55:01 2018 UTC
(5 years, 9 months ago)
by
guez
File length: 17827 byte(s)
Diff to
previous 298
,
to
selected 276
The calls to calcul_fluxs were always done with an array argument
dif_grnd set to a scalar (and that is also the case in LMDZ). So just
use a scalar argument.
In procedure fonte_neige, the value of run_off_lic from previous call
was actually not used. So we can remove the save attribute and make it
an automatic array.
Revision
298 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Jul 26 16:45:51 2018 UTC
(5 years, 10 months ago)
by
guez
File length: 17737 byte(s)
Diff to
previous 297
,
to
selected 276
Use directly dtphys from module comconst when possible instead of
having it trickle down through procedure arguments.
Revision
297 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Jul 26 16:02:11 2018 UTC
(5 years, 10 months ago)
by
guez
File length: 17836 byte(s)
Diff to
previous 293
,
to
selected 276
Rename module interface_surf to conf_interface_m.
Move the computation of pkf out of procedure climb_hq_down into clqh.
Revision
279 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Jul 20 14:30:23 2018 UTC
(5 years, 10 months ago)
by
guez
Original Path:
trunk/phylmd/pbl_surface.f
File length: 17916 byte(s)
Diff to
previous 276
fqcalving was saved in physiq and had intent inout in pbl_surface. So
we could set fqcalving to 0 only once per run. The point is fqcalving
must be defined everywhere for the computation of the average over all
surfaces, even values that get multiplied by pctsrf = 0. I find it
clearer to set fqcalving to 0 at every call of pbl_surface. This is
more expensive but allows to give intent out to fqcalving in
pbl_surface and remove the save attribute in physiq.
Add zxfqcalving output netCDF variable (following LMDZ).
Revision
276 -
(
view)
(
annotate)
-
[selected]
Modified
Thu Jul 12 14:49:20 2018 UTC
(5 years, 10 months ago)
by
guez
Original Path:
trunk/phylmd/pbl_surface.f
File length: 17933 byte(s)
Diff to
previous 275
Move procedure read_serre from module read_serre_m to module
dynetat0_m, to avoid side effet on variables of module dynetat0_m.
Create procedure set_unit_nml to avoid side effect on variable of
module unit_nml_m.
Downgrade pctsrf from variable of module etat0_m to argument of etat0
and limit to avoid side effect on pctsrf.
Move variable zmasq from module dimphy to module phyetat0_m to avoid
side effect on zmasq.
Revision
272 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Jul 11 14:51:28 2018 UTC
(5 years, 10 months ago)
by
guez
Original Path:
trunk/phylmd/pbl_surface.f
File length: 17914 byte(s)
Diff to
previous 271
,
to
selected 276
Add arguments psol and pref to clcdrag, in preparation of merge with
coefcdrag. Remove intent out arguments cdran and zri1 of coefcdrag,
not used. Make argument pref of coefcdrag optional, in preparation of
merge with clcdrag. Remove useless intermediary local variable zdphi
in coefcdrag. Remove unused local variable ri1 in stdlevvar.
Revision
267 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu May 3 16:14:08 2018 UTC
(6 years ago)
by
guez
Original Path:
trunk/phylmd/pbl_surface.f
File length: 17878 byte(s)
Copied from:
trunk/phylmd/clmain.f revision 266
Diff to
previous 254
,
to
selected 276
Rename procedure clmain to pbl_surface (following LMDZ).
Remove choice soil_model = f. This choice made the algorithm unclear
in interfsurf_hq. Also soil_model = f is never used in LMDZ. radsol
was intent inout in clqh because of its possible modification in
interfsurf_hq, but the corresponding actual argument yrads is not used
in pbl_surface. The modification of radsol in interfsurf_hq was a bad
idea. Now we can more clearly make radsol an intent in argument of
clqh and interfsurf_hq.
Revision
244 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Nov 14 14:56:42 2017 UTC
(6 years, 6 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 19972 byte(s)
Diff to
previous 243
,
to
selected 276
In procedure clmain, rename ycoefh to coefh and coefh to ycoefh. Also
rename coefm to ycoefm. The convention is that variables beginning
with "y" are packed to knon. (Following LMDZ.) In physiq, rename
ycoefh to coefh.
Revision
239 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Nov 10 15:16:48 2017 UTC
(6 years, 6 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20628 byte(s)
Diff to
previous 238
,
to
selected 276
In procedure coefkzmin, dummy argument km is equal to dummy argument
kn. Remove it.
Bug fix in clmain. If iflag_pbl /= 1 and ok_kzmin then
ycoef[mh]0(:knon, 1) are not defined and used for computation of
ycdrag[mh](:knon). Remove the lines (following LMDZ).
Revision
229 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Nov 6 17:20:45 2017 UTC
(6 years, 6 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 19738 byte(s)
Diff to
previous 228
,
to
selected 276
Use iflag_pbl from module conf_phys in yamada4 instead of getting it
as argument.
In clvent, simplifications using the fact that zx_alf2 = 0 and zx_alf1
= 1 (discarding the possibility to change this).
In physiq, no need for temporary variables z[uv]strph: compute actual
arguments of aaam_bud directly.
Revision
228 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Nov 3 12:38:47 2017 UTC
(6 years, 6 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 19718 byte(s)
Diff to
previous 227
,
to
selected 276
Bug fix in dynetat0: phisinit to phis.
gcm explodes (stops in hgardfou) in less than one day with iflag_pbl =
7 (Mellor and Yamada 2.0 Fournier) and 11 (corresponding to iflag_pbl
= 31 in LMDZ, call to vdif_kcay). So remove those choices. Not much
used in LMDZ either. Remaining useful choices are iflag = 0, 1, 6, 8,
9.
Remove procedure yamada, which was not used.
Revision
227 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Nov 2 15:47:03 2017 UTC
(6 years, 6 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20092 byte(s)
Diff to
previous 226
,
to
selected 276
Rename phisinit to phis in restart.nc: clearer, same name as Fortran variable.
In aaam_bud, use rlat and rlon from phyetat0_m instead of having these
module variables associated to actual arguments in physiq.
In clmain, too many wind variables make the procedure hard to
understand. Use yu(:knon, 1) and yv(:knon, 1) instead of u1lay(:knon)
and v1lay(:knon). Note that when yu(:knon, 1) and yv(:knon, 1) are
used as actual arguments, they are probably copied to new arrays since
the elements are not contiguous. Rename yu10m to wind10m because this
is the norm of wind vector, not its zonal component. Rename yustar to
ustar. Rename uzon and vmer to u1 and v1 since these are wind
components at first layer and u1 and v1 are the names of corresponding
dummy arguments in stdlevvar.
In clmain, rename yzlev to zlev.
In clmain, screenc, stdlevvar and coefcdrag, remove the code
corresponding to zxli true (not used in LMDZ either).
Subroutine ustarhb becomes a function. Simplifications using the fact
that zx_alf2 = 0 and zx_alf1 = 1 (discarding the possibility to change
this).
In procedure vdif_kcay, remove unused dummy argument plev. Remove
useless computations of sss and sssq.
In clouds_gno, exp(100.) would overflow in single precision. Set
maximum to exp(80.) instead.
In physiq, use u(:, 1) and v(:, 1) as arguments to phytrac instead of
creating ad hoc variables yu1 and yv1.
In stdlevvar, rename dummy argument u_10m to wind10m, following the
corresponding modification in clmain. Simplifications using the fact
that ok_pred = 0 and ok_corr = 1 (discarding the possibility to change
this).
Revision
226 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Oct 16 13:04:05 2017 UTC
(6 years, 7 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20305 byte(s)
Diff to
previous 225
,
to
selected 276
In clmain, u1lay and v1lay do not depend on the subsurface. So output
values of zu1 and zv1 are simply u(:, 1) and v(:, 1). Just remove the
corresponding computations from clmain and define yu1 and yv1 in physiq.
Revision
225 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Oct 16 12:35:41 2017 UTC
(6 years, 7 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20563 byte(s)
Diff to
previous 223
,
to
selected 276
LMDZE is now in Fortran 2003 (use of allocatable arguments).
gradsdef was not used.
Change names: [uv]10m to [uv]10m_srf in clmain, y[uv]1 to
[uv]1lay. Remove useless complication: zx_alf[12]. Do not modify
[uv]1lay after initial definition from [uv].
Add [uv]10m_srf to output.
Change names in physiq: [uv]10m to [uv]10m_srf, z[uv]10m to [uv]10m,
corresponding to NetCDF output names.
Remove unused complication couchelimite and useless variable inirnpb
in phytrac.
Revision
223 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Apr 28 13:22:36 2017 UTC
(7 years, 1 month ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20708 byte(s)
Diff to
previous 222
,
to
selected 276
In clmain, local variable yfder was computed but not used. I think it
was useful for coupling only. Variable fder_print of pbl_surface in
LMDZ, which is output by LMDZ, corresponds to variable fder of physiq
in LMDZ and LMDZE.
Revision
221 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Apr 20 14:44:47 2017 UTC
(7 years, 1 month ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20804 byte(s)
Diff to
previous 215
,
to
selected 276
clcdrag is no longer used in LMDZ. Replaced by cdrag in LMDZ. In cdrag
in LMDZ, zxli is a symbolic constant, false. So removed case zxli true
in LMDZE.
read_sst is called zero (if no ocean point on the whole planet) time or
once per call of physiq. If mod(itap - 1, lmt_pas) == 0 then we have
advanced in time of lmt_pas and deja_lu is necessarily false.
qsat[sl] and dqsat[sl] were never called.
Added output of qsurf in histins, following LMDZ.
Last dummy argument dtime of phystokenc is always the same as first
dummy argument pdtphys, removed dtime.
Removed make rules for nag_xref95, since it does not exist any longer.
Revision
215 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Mar 28 12:46:28 2017 UTC
(7 years, 2 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20742 byte(s)
Diff to
previous 214
,
to
selected 276
size(snow) is now knon in interfsurf_hq.
Renamed snow to fsnow in clmain, same name as corresponding actual
argument. We can then rename ysnow to simply snow in clmain, same name
as corresponding dummy argument of clqh. No need to initialize local
snow to 0 since it is only used with indices 1:knon and already
initialized from fsnow for each type of surface. If there is no point
for a given type of surface, fsnow should be reset to 0 for this
type. We need to give a valid value to fsnow in this case even if it
will be multiplied by pctsrf = 0 in physiq.
In physiq, no need for intermediate zxsnow for output.
Removed unused arguments tsurf, p1lay, beta, coef1lay, ps, t1lay,
q1lay, u1lay, v1lay, petAcoef, peqAcoef, petBcoef, peqBcoef of
fonte_neige, with unused computations of zx_qs and zcor. (Same was
done in LMDZ.)
Revision
214 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Mar 22 13:40:27 2017 UTC
(7 years, 2 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20669 byte(s)
Diff to
previous 213
,
to
selected 276
fluxlat, not yfluxlat, should be set to 0 at the beginning of
clmain. So fluxlat is defined for a given type of surface even if
there is no point of this type at the current time step.
fluxlat is defined at each time step in physiq, no need for the save
attribute.
Revision
213 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Feb 27 15:44:55 2017 UTC
(7 years, 3 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20703 byte(s)
Diff to
previous 209
,
to
selected 276
Removed module conema3_m. Moved variables epmax and iflag_clw of
conema3_m to conf_phys_m, where they are defined. Removed unused
variable ok_adj_ema of conema3_m.
Added variables d_t_ec, dtsw0 and dtlw0 to histins.nc (following LMDZ).
Removed case not lessivage in phytrac. (Not used in LMDZ without INCA
either.)
Revision
209 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Dec 7 17:37:21 2016 UTC
(7 years, 5 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20706 byte(s)
Diff to
previous 208
,
to
selected 276
The program did not work with cycle_diurne set to false. mu0 in
physiq, which is supposed to be a cosine, was set to -999.999. So prmu
in swu had a value of the order of 1e3. So zrmum1 in sw2s had a value
of the order of 1e3. So zrayl in sw2s had a value of the order of
1e15. So ztray and ptauaz in swclr also had a large value. So zcorae
at line 138 in swclr had a large negative value, which resulted in
overflow at line 138.
This assignment of -999.999 to mu0 dates from somewhere between
revisions 348 and 524 of LMDZ. It was corrected in revision 1068 of
LMDZ with a call to angle which was present in revision 348. However,
procedure angle was removed from LMDZE in revision 22 because it was
not used. Hesitated to bring back angle but, finally, just removed the
option of having no diurnal cycle.
Revision
208 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Dec 7 16:44:53 2016 UTC
(7 years, 5 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20777 byte(s)
Diff to
previous 207
,
to
selected 276
Module academic was not used.
Useful values for iflag_phys were only 0 and 1 so changed type to logical.
Definition of fmagic was duplicated in procedures alboc and alboc_cd
so moved it up to interfsurf_hq and also moved multiplication by
fmagic (following LMDZ).
Revision
206 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Aug 30 12:52:46 2016 UTC
(7 years, 9 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 21010 byte(s)
Diff to
previous 202
,
to
selected 276
Removed dimension klev of flux_[tquv] and y_flux_[tquv] in
clmain. Removed dimension klev of flux_[tquv] in physiq. Removed
dimension klev of flux_[tq] in hbtm. Removed dimension klev of
flux_[tq] in clqh and computations for layers other than the surface
layer. Removed dimension klev of flux_v in clvent and computations for
layers other than the surface layer. Values for layers other than the
surface layer were not used nor output (not even in LMDZ).
Removed argument dnwd0 of concvl. Simply write - mp in physiq
(following LMDZ).
Removed useless intermediary variables zxflux[tquv] in physiq.
Revision
202 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Jun 8 12:23:41 2016 UTC
(7 years, 11 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 21124 byte(s)
Diff to
previous 191
,
to
selected 276
Promoted lmt_pas from local variable of physiq to variable of module
conf_gcm_m.
Removed variable run_off of module interface_surf. Was not
used. Called run_off_ter in LMDZ, but not used nor printed there
either.
Simplified logic in interfoce_lim. The way it was convoluted with
interfsurf_hq and clmain was quite a mess. Extracted reading of SST
into a separate procedure: read_sst. We do not need SST and pctsrf_new
at the same time: SST is not needed for sea-ice surface. I did not
like this programming: going through the procedure repeatedly for
different purposes and testing inside whether there was something to
do or it was already done. Reading is now only controlled by itap and
lmt_pas, instead of debut, jour, jour_lu and deja_lu. Now we do not
copy from pct_tmp to pctsrf_new every time step.
Simplified processing of pctsrf in clmain and below. It was quite
troubling: pctsrf_new was intent out in interfoce_lim but only defined
for ocean and sea-ice. Also the idea of having arrays for all
surfaces, pcsrf and pctsrf_new, in interfsurf_hq, which is called for
a particular surface, was troubling. pctsrf_new for all surfaces was
intent out in intefsurf_hq, but not defined for all surfaces at each
call. Removed argument pctsrf_new of clmain: was a duplicate of pctsrf
on output, and not used in physiq. Replaced pctsrf_new in clmain by
pctsrf_new_oce and pctsrf_new_sic, which were the only ones modified.
Revision
191 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon May 9 19:56:28 2016 UTC
(8 years ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20683 byte(s)
Diff to
previous 186
,
to
selected 276
Extracted the call to read_comdissnew out of conf_gcm.
Made ok_instan a variable of module clesphys, itau_phy a variable of
module phyetat0_m, nid_ins a variable of module ini_histins_m, itap a
variable of new module time_phylmdz, so that histwrite_phy can be
called from any procedure without the need to cascade those variables
into that procedure. Made itau_w a variable of module time_phylmdz so
that it is computed only once per time step of physics.
Extracted variables of module clesphys which were in namelist
conf_phys_nml into their own namelist, clesphys_nml, and created
procedure read_clesphys reading clesphys_nml, to avoid side effect.
No need for double precision in procedure getso4fromfile. Assume there
is a single variable for the whole year in the NetCDF file instead of
one variable per month.
Created generic procedure histwrite_phy and removed procedure
write_histins, following LMDZ. histwrite_phy has only two arguments,
can be called from anywhere, and should manage the logic of writing or
not writing into various history files with various operations. So the
test on ok_instan goes inside histwrite_phy.
Test for raz_date in phyetat0 instead of physiq to avoid side effect.
Created procedure increment_itap to avoid side effect.
Removed unnecessary differences between procedures readsulfate and
readsulfate_pi.
Revision
186 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Mar 21 15:36:26 2016 UTC
(8 years, 2 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20695 byte(s)
Diff to
previous 178
,
to
selected 276
Removed variables nlm and nlp of module cv30_param_m. We do not
believe much in the benefit of these intermediary variables so we go
for clarity.
Removed variable noff of module cv30_param_m. Never used anywhere
else. Just set the value of nl explicitly in cv30_param.
Removed argument nd of cv30_param. Only called with nd = klev.
Replaced calls to zilch by array assignments. There was a strange
double call to zilch with the same arguments in cv30_mixing.
Removed procedure cv_flag. Just set the value of variable cvflag_grav
of module cvflag at declaration.
Revision
178 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Mar 11 18:47:26 2016 UTC
(8 years, 2 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 20657 byte(s)
Diff to
previous 175
,
to
selected 276
Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos,
buffer, regular from module histcom_var to modules where they are
defined.
Removed procedure ioipslmpp, useless for a sequential program.
Added argument datasz_max to histwrite_real (to avoid circular
dependency with histwrite).
Removed useless variables and computations everywhere.
Changed real litteral constants from default kind to double precision
in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu.
Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of
sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of
transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of
orosetup.
Added output of relative humidity.
Revision
175 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Feb 5 16:02:34 2016 UTC
(8 years, 3 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 21055 byte(s)
Diff to
previous 155
,
to
selected 276
Added argument itau_phy to ini_histins, phyetat0, phytrac and
phyredem0. Removed variable itau_phy of module temps. Avoiding side
effect in etat0 and phyetat0. The procedures ini_histins, phyetat0,
phytrac and phyredem0 are all called by physiq so there is no
cascading variable penalty.
In procedure inifilr, made the condition on colat0 weaker to allow for
rounding error.
Removed arguments flux_o, flux_g and t_slab of clmain, flux_o and
flux_g of clqh and interfsurf_hq, tslab and seaice of phyetat0 and
phyredem. NetCDF variables TSLAB and SEAICE no longer in
restartphy.nc. All these variables were related to the not-implemented
slab ocean. seaice and tslab were just set to 0 in phyetat0 and never
used nor changed. flux_o and flux_g were computed in clmain but never
used in physiq.
Removed argument swnet of clqh. Was used only to compute a local
variable, swdown, which was not used.
Revision
155 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Jul 8 17:03:45 2015 UTC
(8 years, 10 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 22387 byte(s)
Diff to
previous 154
,
to
selected 276
Do not write any longer to startphy.nc nor read from restartphy.nc the
NetCDF variable ALBLW: it was the same than ALBE. ALBE was for the
visible and ALBLW for the near infrared. In physiq, use only variables
falbe and albsol, removed falblw and albsollw. See revision 888 of
LMDZ.
Removed unused arguments pdp of SUBROUTINE lwbv, ptave of SUBROUTINE
lwv, kuaer of SUBROUTINE lwvd, nq of SUBROUTINE initphysto.
Revision
154 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Jul 7 17:49:23 2015 UTC
(8 years, 10 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 22514 byte(s)
Diff to
previous 149
,
to
selected 276
Removed argument dtphys of physiq. Use it directly from comconst in
physiq instead.
Donwgraded variables eignfnu, eignfnv of module inifgn_m to dummy
arguments of SUBROUTINE inifgn. They were not used elsewhere than in
the calling procedure inifilr. Renamed argument dv of inifgn to eignval_v.
Made alboc and alboc_cd independent of the size of arguments. Now we
can call them only at indices knindex in interfsurf_hq, where we need
them. Fixed a bug in alboc_cd: rmu0 was modified, and the
corresponding actual argument in interfsurf_hq is an intent(in)
argument of interfsurf_hq.
Variables of size knon instead of klon in interfsur_lim and interfsurf_hq.
Removed argument alb_new of interfsurf_hq because it was the same than
alblw. Simplified test on cycle_diurne, following LMDZ.
Moved tests on nbapp_rad from physiq to read_clesphys2. No need for
separate counter itaprad, we can use itap. Define lmt_pas and radpas
from integer input parameters instead of real-type computed values.
Revision
149 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Jun 18 12:23:44 2015 UTC
(8 years, 11 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 22549 byte(s)
Diff to
previous 145
,
to
selected 276
In invert_zoom_x, call rtsafe instead of the equivalent coding that
was there. funcd needs to access a[0-4] and abs_y so we upgrade a[0-4]
from arguments of coefpoly to variables of module coefpoly_m and abs_y
from local variable of invert_zoom_x to private variable of module
invert_zoom_x_m.
Removed unused arguments t10m and q10m of hbtm.
Revision
145 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Jun 16 15:23:29 2015 UTC
(8 years, 11 months ago)
by
guez
Original Path:
trunk/Sources/phylmd/clmain.f
File length: 22563 byte(s)
Diff to
previous 134
,
to
selected 276
Renamed bibio to misc.
In procedure fxhyp, use the fact that xf is an odd function of xtild.
In procedure invert_zoom_x, replace linear search in xf by
bisection. Also, use result from previous loop iteration as initial
guess. Variable "it" cannot be equal to 2 * nmax after search.
Unused arguments: hm of cv3_feed; ph, qnk, tv,tvp of cv3_mixing; ppsol
of lw; rconst, temp of vdif_kcay; rconst, plev, temp, ustar, l_mix of
yamada.
Revision
118 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Dec 18 17:30:24 2014 UTC
(9 years, 5 months ago)
by
guez
Original Path:
trunk/phylmd/clmain.f
File length: 22523 byte(s)
Diff to
previous 106
,
to
selected 276
In file grilles_gcm.nc, renamed variable phis to orog, deleted
variable presnivs.
Removed variable bug_ozone from module clesphys.
In procedure ozonecm, moved computation of sint and cost out of the
loops on horizontal position and vertical level. Inverted the order of
the two loops. We can then move all computations from slat to aprim
out of the loop on vertical levels. Created variable slat2, following
LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12
from radlwsw to ozonecm, following LMDZ.
Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq,
pmflxr, pmflxs, prfl, psfl of phytrac.
In procedure yamada4, for all the arrays, replaced the dimension klon
by ngrid. At the end of the procedure, for the computation of kmn,kn,
kq and q2, changed the upper limit of the loop index from klon to ngrid.
In radlwsw, for the calculation of pozon, removed the factor
paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the
factor 101325.0/PPSOL(JL), as in LMDZ.
Revision
104 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Sep 4 10:05:52 2014 UTC
(9 years, 8 months ago)
by
guez
Original Path:
trunk/phylmd/clmain.f
File length: 22464 byte(s)
Diff to
previous 101
,
to
selected 276
Removed procedure sortvarc0. Called sortvarc with an additional
argument resetvarc instead. (Following LMDZ.) Moved current time
computations and some printing statements from sortvarc to
caldyn. Could then remove arguments itau and time_0 of sortvarc, and
could remove "use dynetat0". Better to keep "dynetat0.f" as a gcm-only
file.
Moved some variables from module ener to module sortvarc.
Split file "mathelp.f" into single-procedure files.
Removed unused argument nadv of adaptdt. Removed dimension arguments
of bernoui.
Removed unused argument nisurf of interfoce_lim. Changed the size of
argument lmt_sst of interfoce_lim from klon to knon. Removed case when
newlmt is false.
dynredem1 is called only once in each run, either ce0l or gcm. So
variable nb in call to nf95_put_var was always 1. Removed variable nb.
Removed dimension arguments of calcul_fluxs. Removed unused arguments
precip_rain, precip_snow, snow of calcul_fluxs. Changed the size of
all the arrays in calcul_fluxs from klon to knon.
Removed dimension arguments of fonte_neige. Changed the size of all
the arrays in fonte_neige from klon to knon.
Changed the size of arguments tsurf and tsurf_new of interfsurf_hq
from klon to knon. Changed the size of argument ptsrf of soil from
klon to knon.
Revision
101 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Jul 7 17:45:21 2014 UTC
(9 years, 10 months ago)
by
guez
Original Path:
trunk/phylmd/clmain.f
File length: 22472 byte(s)
Diff to
previous 99
,
to
selected 276
Removed unused files "interfoce_slab.f" and "gath2cpl.f". Removed
unused variables coastalflow and riverflow of module
interface_surf. Removed unused arguments cal, radsol, dif_grnd,
fluxlat, fluxsens, dflux_s, dflux_l of procedure fonte_neige. Removed
unused arguments tslab, seaice of procedure interfsurf_hq and
clqh. Removed unused arguments seaice of procedure clmain.
In interfsurf_hq, used variable soil_model of module clesphys2 instead
of cascading it as an argument from physiq.
In phyetat0, stop if masque not found.
Variable TS instead of "TS[0-9][0-9]" in "(re)startphy.nc", with
additional dimension nbsrf.
Revision
99 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Jul 2 18:39:15 2014 UTC
(9 years, 10 months ago)
by
guez
Original Path:
trunk/phylmd/clmain.f
File length: 22343 byte(s)
Diff to
previous 98
,
to
selected 276
Created procedure test_disvert (following LMDZ). Added procedures
hybrid and funcd in module disvert_m. Upgraded compute_ab from
internal procedure of disvert to module procedure. Added variables y,
ya in module disvert_m. Upgraded s from local variable of procedure
disvert to module variable.
Renamed allowed value of variable vert_sampling in procedure disvert
from "read" to "read_hybrid". Added possibility to read pressure
values, value "read_pressure". Replaced vertical distribution for
value "param" by the distribution "strato_correct" from LMDZ (but kept
the value "param"). In case "tropo", replaced 1 by dsigmin (following
LMDZ). In case "strato", replaced 0.3 by dsigmin (following LMDZ).
Changed computation of bp in procedure compute_ab.
Removed debugindex case in clmain. Removed useless argument rlon of
procedure clmain. Removed useless variables ytaux, ytauy of procedure
clmain.
Removed intermediary variables tsol, qsol, tsolsrf, tslab in procedure
etat0.
Removed variable ok_veget:. coupling with the model Orchid is not
possible. Removed variable ocean: modeling an ocean slab is not
possible.
Removed useless variables tmp_rriv and tmp_rcoa from module
interface_surf.
Moved initialization of variables da, mp, phi in procedure physiq to
to inside the test iflag_con >= 3.
Revision
98 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue May 13 17:23:16 2014 UTC
(10 years ago)
by
guez
Original Path:
trunk/phylmd/clmain.f
File length: 25251 byte(s)
Diff to
previous 92
,
to
selected 276
Split inter_barxy.f : one procedure per module, one module per
file. Grouped the files into a directory.
Split orbite.f.
Value of raz_date read from the namelist is taken into account
(resetting the step counter) even if annee_ref == anneeref and day_ref
== dayref. raz_date is no longer modified by gcm main unit. (Following
LMDZ.)
Removed argument klon of interfsur_lim. Renamed arguments lmt_alb,
lmt_rug to alb_new, z0_new (same name as corresponding actual
arguments in interfsurf_hq).
Removed argument klon of interfsurf_hq.
Removed arguments qs and d_qs of diagetpq. Were always
zero. Downgraded arguments d_qw, d_ql of diagetpq to local variables,
they were not used in physiq. Removed all computations for solid water
in diagetpq, was just zero.
Downgraded arguments fs_bound, fq_bound of diagphy to local variables,
they were not used in physiq. Encapsulated in a test on iprt all
computations in diagphy.
Removed parameter nbtr of module dimphy. Replaced it everywhere in the
program by nqmx - 2.
Removed parameter rnpb of procedure physiq. Kept the true case in
physiq and phytrac. Could not work with false case anyway.
Removed arguments klon, llm, airephy of qcheck. Removed argument ftsol
of initrrnpb, was not used.
Revision
72 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Jul 23 13:00:07 2013 UTC
(10 years, 10 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 25251 byte(s)
Diff to
previous 71
,
to
selected 276
NaN to signalling NaN in gfortran_debug.mk.
Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.
Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.
Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.
In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)
Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.
Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)
Revision
71 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Jul 8 18:12:18 2013 UTC
(10 years, 10 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 25946 byte(s)
Diff to
previous 70
,
to
selected 276
No reason to call inidissip in ce0l.
In inidissip, set random seed to 1 beacuse PGI compiler does not
accept all zeros.
dq was computed needlessly in caladvtrac. Arguments masse and dq of
calfis not used.
Replaced real*8 by double precision.
Pass arrays with inverted order of vertical levels to conflx instead
of creating local variables for this inside conflx.
Revision
70 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Jun 24 15:39:52 2013 UTC
(10 years, 11 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 25932 byte(s)
Diff to
previous 62
,
to
selected 276
In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.
In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".
Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".
In "hgardfou", print only the first temperature out of range found.
Revision
62 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Jul 26 14:37:37 2012 UTC
(11 years, 10 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 25856 byte(s)
Diff to
previous 61
,
to
selected 276
Changed handling of compiler in compilation system.
Removed the prefix letters "y", "p", "t" or "z" in some names of variables.
Replaced calls to NetCDF by calls to NetCDF95.
Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.
Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".
Removed computation of "dq" in "bilan_dyn", which was not used.
In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.
In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".
Removed possible call to "conema3" in "physiq".
Removed unused argument "cd" in "yamada".
Revision
61 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Apr 20 14:58:43 2012 UTC
(12 years, 1 month ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 25733 byte(s)
Diff to
previous 57
,
to
selected 276
No more included file in LMDZE, not even "netcdf.inc".
Created a variable containing the list of common source files in
GNUmakefile. So we now also see clearly files that are specific to
each program.
Split module "histcom". Assembled resulting files in directory
"Histcom".
Removed aliasing in calls to "laplacien".
Revision
57 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Jan 30 12:54:02 2012 UTC
(12 years, 4 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 25648 byte(s)
Diff to
previous 51
,
to
selected 276
Write used namelists to file "" instead of standard output.
Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad",
"gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate
dimension to arrays so they have rank 3, like the dummy arguments in
"divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot".
Extract the initialization part from "bilan_dyn" and make a separate
procedure, "init_dynzon", from it.
Move variables from modules "iniprint" and "logic" to module
"conf_gcm_m".
Promote internal procedures of "fxy" to private procedures of module
"fxy_m".
Extracted documentation from "inigeom". Removed useless "save"
attributes. Removed useless intermediate variables. Extracted
processing of poles from loop on latitudes. Write coordinates to file
"longitude_latitude.txt" instead of standard output.
Do not use ozone tracer for radiative transfer.
Revision
51 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Sep 20 09:14:34 2011 UTC
(12 years, 8 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 25646 byte(s)
Diff to
previous 49
,
to
selected 276
Split "getincom.f90" into "getincom.f90" and "getincom2.f90". Split
"nuage.f" into "nuage.f90", "diagcld1.f90" and "diagcld2.f90". Created
module "chem" from included file "chem.h". Moved "YOEGWD.f90" to
directory "Orography".
In "physiq", for evaporation of water, "zlsdcp" was equal to
"zlvdc". Removed useless variables.
Revision
49 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Wed Aug 24 11:43:14 2011 UTC
(12 years, 9 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 25632 byte(s)
Diff to
previous 47
,
to
selected 276
LMDZE now uses library Jumble.
Removed all calls to "flinget". Replaced calls to "flinget",
"flininfo", "flinopen_nozoom" by calls to NetCDF95 and Jumble.
Split file "cv_driver.f" into "cv_driver.f90", "cv_flag.f90" and
"cv_thermo.f90".
Bug fix: "QANCIEN" was read twice in "phyeytat0".
In "physiq", initialization of "d_t", "d_u", "d_v" was useless.
Revision
38 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Jan 6 17:52:19 2011 UTC
(13 years, 4 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 28294 byte(s)
Diff to
previous 37
,
to
selected 276
Extracted ASCII art from "inigeom" into a separate text file in the
documentation.
"test_disvert" now creates a separate file for layer thicknesses.
Moved variables from module "yomcst" to module "suphec_m" because this
is where those variables are defined. Kept in "yomcst" only parameters
of Earth orbit. Gave the attribute "parameter" to some variables of
module "suphec_m".
Variables of module "yoethf" were defined in procedure "suphec". Moved
these definitions to a new procedure "yoethf" in module "yoethf_m".
Revision
37 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Dec 21 15:45:48 2010 UTC
(13 years, 5 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 27548 byte(s)
Diff to
previous 30
,
to
selected 276
Inlined procedure "pression".
Split "guide.f90" into "guide.f90" and "tau2alpha.f90". Split
"read_reanalyse.f" into single-procedure files in directory
"Read_reanalyse".
Useless copy of variables in "iniphysiq". Directly define module
variables in "gcm" and remove procedure "iniphysiq".
Added "pressure-altitude" in "test_disvert".
Revision
30 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Thu Apr 1 09:07:28 2010 UTC
(14 years, 2 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 27812 byte(s)
Diff to
previous 25
,
to
selected 276
Imported Source files of the external library "IOIPSL_Lionel" into
"libf/IOIPSL".
Split "cray.f90" into "scopy.f90" and "ssum.f90".
Rewrote "leapfrog" in order to have a clearer algorithmic structure.
Revision
25 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Mar 5 16:43:45 2010 UTC
(14 years, 2 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 27774 byte(s)
Diff to
previous 17
,
to
selected 276
Simplified "etat0_lim.sh" and "gcm.sh" because the full versions
depended on personal arrangements for directories and machines.
Translated included files into modules. Encapsulated procedures into modules.
Moved variables from module "comgeom" to local variables of
"inigeom". Deleted some unused variables in "comgeom".
Moved variable "day_ini" from module "temps" to module "dynetat0_m".
Removed useless test on variable "time" and useless "close" statement
in procedure "leapfrog".
Removed useless call to "inigeom" in procedure "limit".
Revision
17 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Tue Aug 5 13:31:32 2008 UTC
(15 years, 9 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 27750 byte(s)
Diff to
previous 15
,
to
selected 276
Created rule for "compare_sampl_*" files in
"Documentation/Manuel_LMDZE.texfol/Graphiques/GNUmakefile".
Extracted "qcheck", "radiornpb", "minmaxqfi" into separate files.
Read pressure coordinate of ozone coefficients once per run instead of
every day.
Added some "intent" attributes.
Added argument "nq" to "ini_histday". Replaced calls to "gr_fi_ecrit"
by calls to "gr_phy_write_2d". "Sigma_O3_Royer" is written to
"histday.nc" only if "nq >= 4". Moved "ini_histrac" to module
"ini_hist".
Compute "zmasse" in "physiq", pass it to "phytrac".
Removed computations of "pftsol*" and "ppsrf*" in "phytrac".
Do not use variable "rg" from module "YOMCST" in "TLIFT".
Revision
15 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Aug 1 15:24:12 2008 UTC
(15 years, 10 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f90
File length: 27540 byte(s)
Copied from:
trunk/libf/phylmd/clmain.f revision 14
Diff to
previous 14
,
to
selected 276
-- Minor modification of input/output:
Added variable "Sigma_O3_Royer" to "histday.nc". "ecrit_day" is not
modified in "physiq". Removed variables "pyu1", "pyv1", "ftsol1",
"ftsol2", "ftsol3", "ftsol4", "psrf1", "psrf2", "psrf3", "psrf4"
"mfu", "mfd", "en_u", "en_d", "de_d", "de_u", "coefh" from
"histrac.nc".
Variable "raz_date" of module "conf_gcm_m" has logical type instead of
integer type.
-- Should not change any result at run time:
Modified calls to "IOIPSL_Lionel" procedures because the interfaces of
these procedures have been simplified.
Changed name of variable in module "start_init_orog_m": "masque" to
"mask".
Created a module containing procedure "phyredem".
Removed arguments "punjours", "pdayref" and "ptimestep" of procedure
"iniphysiq".
Renamed procedure "gr_phy_write" to "gr_phy_write_2d". Created
procedure "gr_phy_write_3d".
Removed procedures "ini_undefstd", "moy_undefSTD", "calcul_STDlev",
"calcul_divers".
Revision
13 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Jul 25 19:59:34 2008 UTC
(15 years, 10 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f
File length: 29371 byte(s)
Diff to
previous 12
,
to
selected 276
-- Minor change of behaviour:
"etat0" does not compute "rugsrel" nor "radpas". Deleted arguments
"radpas" and "rugsrel" of "phyredem". Deleted argument "rugsrel" of
"phyetat0". "startphy.nc" does not contain the variable "RUGSREL". In
"physiq", "rugoro" is set to 0 if not "ok_orodr". The whole program
"etat0_lim" does not use "clesphys2".
-- Minor modification of input/output:
Created subroutine "read_clesphys2". Variables of "clesphys2" are read
in "read_clesphys2" instead of "conf_gcm". "printflag" does not print
variables of "clesphys2".
-- Should not change any result at run time:
References to module "numer_rec" instead of individual modules of
"Numer_rec_Lionel".
Deleted argument "clesphy0" of "calfis", "physiq", "conf_gcm",
"leapfrog", "phyetat0". Deleted variable "clesphy0" in
"gcm". "phyetat0" does not modify variables of "clesphys2".
The program unit "gcm" does not modify "itau_phy".
Added some "intent" attributes.
"regr11_lint" does not call "polint".
Revision
12 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Jul 21 16:05:07 2008 UTC
(15 years, 10 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f
File length: 29387 byte(s)
Diff to
previous 10
,
to
selected 276
-- Minor modification of input/output:
Created procedure "read_logic". Variables of module "logic" are read
by "read_logic" instead of "conf_gcm". Variable "offline" of module
"conf_gcm" is read from namelist instead of "*.def".
Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0",
"tabcntr0" and local variables "radpas", "tab_cntrl" of
"phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any
longer. "phyetat0" now reads global attribute "itau_phy" from
"startphy.nc". "phyredem" does not create variable "controle" in
"startphy.nc" any longer. "phyredem" now writes global attribute
"itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of
"printflag". Removed diagnostic messages written by "printflag" for
comparison of the variable "controle" of "startphy.nc" and the
variables read from "*.def" or namelist input.
-- Removing unwanted functionality:
Removed variable "lunout" from module "iniprint", replaced everywhere
by standard output.
Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and
"physiq". Removed procedure "interfoce_cpl".
-- Should not change anything at run time:
Automated creation of graphs in documentation. More documentation on
input files.
Converted Fortran files to free format: "phyredem.f90", "printflag.f90".
Split module "clesphy" into "clesphys" and "clesphys2".
Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and
"statcl" from module "logic". Added arguments "conser" to "advect",
"leapf" to "integrd". Added local variables "forward", "leapf",
"apphys", "conser", "apdiss" in "leapfrog".
Added intent attributes.
Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh"
of "phytrac", "dt" of "yamada".
Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0",
"length", "tabcntr0" in "physiq". Replaced all references to "dtime"
by references to "pdtphys".
Revision
10 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Fri Apr 18 14:45:53 2008 UTC
(16 years, 1 month ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f
File length: 29420 byte(s)
Diff to
previous 7
,
to
selected 276
Added NetCDF directory "/home/guez/include" in "g95.mk" and
"nag_tools.mk".
Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac",
"calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec",
"calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3",
"conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2",
"drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell".
Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo"
and messages for end of run from "abort_gcm" to "gcm"; replaced call
to "abort_gcm" in "leapfrog" by exit from outer loop.
In "calfis": removed argument "pp" and variable "unskap"; changed
"pksurcp" from scalar to rank 2; use "pressure_var"; rewrote
computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy";
added computation of "pls".
Removed unused variable in "dynredem0".
In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call
to "ssum" by call to "sum"; removed variables "xpn" and "xps";
replaced some loops by array expressions.
In "leapfrog": use "pressure_var"; deleted variables "p", "longcles".
Converted common blocks "YOECUMF", "YOEGWD" to modules.
Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr".
Created module "raddimlw" from include file "raddimlw.h".
Corrected call to "new_unit" in "test_disvert".
Revision
7 -
(
view)
(
annotate)
-
[select for diffs]
Modified
Mon Mar 31 12:24:17 2008 UTC
(16 years, 2 months ago)
by
guez
Original Path:
trunk/libf/phylmd/clmain.f
File length: 29476 byte(s)
Diff to
previous 3
,
to
selected 276
This revision is not in working order. Pending some moving of files.
Important changes. In the program "etat0_lim": ozone coefficients from
Mobidic are regridded in time instead of pressure ; consequences in
"etat0". In the program "gcm", ozone coefficients from Mobidic are
read once per day only for the current day and regridded in pressure ;
consequences in "o3_chem_m", "regr_pr_coefoz", "phytrac" and
"regr_pr_comb_coefoz_m".
NetCDF95 is a library and does not export NetCDF.
New variables "nag_gl_options", "nag_fcalls_options" and
"nag_cross_options" in "nag_tools.mk".
"check_coefoz.jnl" rewritten entirely for new version of
"coefoz_LMDZ.nc".
Target "obj_etat0_lim" moved from "GNUmakefile" to "nag_rules.mk".
Added some "intent" attributes in "calfis", "clmain", "clqh",
"cltrac", "cltracrn", "cvltr", "ini_undefSTD", "moy_undefSTD",
"nflxtr", "phystokenc", "phytrac", "readsulfate", "readsulfate_preind"
and "undefSTD".
In "dynetat0", "dynredem0" and "gcm", "phis" has rank 2 instead of
1. "phis" has assumed shape in "dynredem0".
Added module containing "dynredem0". Changed some calls with NetCDF
Fortran 77 interface to calls with NetCDF95 interface.
Replaced calls to "ssum" by calls to "sum" in "inigeom".
In "make.sh", new option "-c" to change compiler.
In "aaam_bud", argument "rjour" deleted.
In "physiq": renamed some variables; deleted variable "xjour".
In "phytrac": renamed some variables; new argument "lmt_pas".
This form allows you to request diffs between any two revisions of this file.
For each of the two "sides" of the diff,
enter a numeric revision.