[lmdze] Log of /trunk/phylmd/Radlwsw

Revision 217 - Directory Listing
Modified Thu Mar 30 14:25:18 2017 UTC (7 years, 1 month ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

run_off_lic downgraded from variable of module interface_surf to local
variable of fonte_neige.

Code could not work with ok_aie set to true, so removed this
possibility. tauae, piz_ae, cg_ae, topswai, solswai were then
0. cldtaupi was the same as cldtaupd.

In sw and procedures called by sw, flag_aer did not need to be double
precision, changed it to logical.

Downgraded re and fl from arguments of newmicro to local
variables. Added output of re and fl (following LMDZ).

Revision 213 - Directory Listing
Modified Mon Feb 27 15:44:55 2017 UTC (7 years, 2 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

Removed module conema3_m. Moved variables epmax and iflag_clw of
conema3_m to conf_phys_m, where they are defined. Removed unused
variable ok_adj_ema of conema3_m.

Added variables d_t_ec, dtsw0 and dtlw0 to histins.nc (following LMDZ).

Removed case not lessivage in phytrac. (Not used in LMDZ without INCA
either.)

Revision 212 - Directory Listing
Modified Thu Jan 12 12:31:31 2017 UTC (7 years, 4 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

Moved variables from module com_io_dyn to module inithist_m, where
they are defined.

Split grid_atob.f into grille_m.f and dist_sphe.f. Extracted ASCCI art
to documentation. In grille_m, use automatic arrays instead of maximum
size. In grille_m, instead of printing data for every problematic
point, print a single diagnostic message.

Removed variables top_height, overlap, lev_histhf, lev_histday,
lev_histmth, type_run, ok_isccp, ok_regdyn, lonmin_ins, lonmax_ins,
latmin_ins, latmax_ins of module clesphys, not used.

Removed variable itap of module histwrite_phy_m, not used. There is a
variable itap in module time_phylmdz.

Added output of tro3.

In physiq, no need to compute wo at every time-step, since we only use
it in radlwsw.

Revision 208 - Directory Listing
Modified Wed Dec 7 16:44:53 2016 UTC (7 years, 5 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

Module academic was not used.

Useful values for iflag_phys were only 0 and 1 so changed type to logical.

Definition of fmagic was duplicated in procedures alboc and alboc_cd
so moved it up to interfsurf_hq and also moved multiplication by
fmagic (following LMDZ).

Revision 178 - Directory Listing
Modified Fri Mar 11 18:47:26 2016 UTC (8 years, 2 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

Moved variables date0, deltat, datasz_max, ncvar_ids, point, buff_pos,
buffer, regular from module histcom_var to modules where they are
defined.

Removed procedure ioipslmpp, useless for a sequential program.

Added argument datasz_max to histwrite_real (to avoid circular
dependency with histwrite).

Removed useless variables and computations everywhere.

Changed real litteral constants from default kind to double precision
in lwb, lwu, lwvn, sw1s, swtt, swtt1, swu.

Removed unused arguments: paer of sw, sw1s, sw2s, swclr; pcldsw of
sw1s, sw2s; pdsig, prayl of swr; co2_ppm of clmain, clqh; tsol of
transp_lay; nsrf of screenp; kcrit and kknu of gwstress; pstd of
orosetup.

Added output of relative humidity.

Revision 168 - Directory Listing
Modified Wed Sep 9 10:41:47 2015 UTC (8 years, 8 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

In order to be able to choose finer resolutions, set large memory
model in compiler options and use dynamic libraries.

Variables rlatd, rlond, cuphy and cvphy of module comgeomphy were
never used. (In LMDZ, they are used only for Orchid.)

There is a bug in PGI Fortran 13.10 that does not accept the
combination of forall, pack and spread in regr_pr_av and
regr_pr_int. In order to circumvent this bug, created the function
gr_dyn_phy.

In program test_inifilr, use a single latitude coordinate for north
and south.

Revision 166 - Directory Listing
Modified Wed Jul 29 14:32:55 2015 UTC (8 years, 9 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

Split ppm3d.f into files containing a single procedure.

Factorized computations of filtering matrices into a procedure
inifilr_hemisph. Had then to change the matrices from allocatable to
pointer and from customized lower bound to lower bound 1. The change
in lower bounds does not matter because the matrices are only used as
a whole as actual arguments.

Also, in infilr, instead of finding jfilt[ns][uv] from approximately
jjm /2, start at index j1 that corresponds to the equator. This is not
the same if there is a zoom in latitude.

Also, the test (rlamda(modfrst[ns][uv](j)) * cos(rlat[uv](j)) < 1) in
the loops on filtered latitudes is not useful now that we start from
j1: it is necessarily true. See notes.

Just encapsulated lwvn into a module and removed unused argument ktraer.

Revision 157 - Directory Listing
Modified Mon Jul 20 16:01:49 2015 UTC (8 years, 9 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

Just encapsulated SUBROUTINE vlsplt in a module and cleaned it.

In procedure vlx, local variables dxqu and adxqu only need indices
iip2:ip1jm. Otherwise, just cleaned vlx.

Procedures dynredem0 and dynredem1 no longer have argument fichnom,
they just operate on a file named "restart.nc". The programming
guideline here is that gcm should not be more complex than it needs by
itself, other programs (ce0l etc.) just have to adapt to gcm. So ce0l
now creates files "restart.nc" and "restartphy.nc".

In order to facilitate decentralizing the writing of "restartphy.nc",
created a procedure phyredem0 out of phyredem. phyredem0 creates the
NetCDF header of "restartphy.nc" while phyredem writes the NetCDF
variables. As the global attribute itau_phy needs to be filled in
phyredem0, at the beginnig of the run, we must compute its value
instead of just using itap. So we have a dummy argument lmt_pas of
phyredem0. Also, the ncid of "startphy.nc" is upgraded from local
variable of phyetat0 to dummy argument. phyetat0 no longer closes
"startphy.nc".

Following the same decentralizing objective, the ncid of "restart.nc"
is upgraded from local variable of dynredem0 to module variable of
dynredem0_m. "restart.nc" is not closed at the end of dynredem0 nor
opened at the beginning of dynredem1.

In procedure etat0, instead of creating many vectors of size klon
which will be filled with zeroes, just create one array null_array.

In procedure phytrac, instead of writing trs(: 1) to a text file,
write it to "restartphy.nc" (following LMDZ). This is better because
now trs(: 1) is next to its coordinates. We can write to
"restartphy.nc" from phytrac directly, and not add trs(: 1) to the
long list of variables in physiq, thanks to the decentralizing of
"restartphy.nc".

In procedure phyetat0, we no longer write to standard output the
minimum and maximum values of read arrays. It is ok to check input and
abort on invalid values but just printing statistics on input seems too
much useless computation and out of place clutter.

Revision 155 - Directory Listing
Modified Wed Jul 8 17:03:45 2015 UTC (8 years, 10 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

Do not write any longer to startphy.nc nor read from restartphy.nc the
NetCDF variable ALBLW: it was the same than ALBE. ALBE was for the
visible and ALBLW for the near infrared. In physiq, use only variables
falbe and albsol, removed falblw and albsollw. See revision 888 of
LMDZ.

Removed unused arguments pdp of SUBROUTINE lwbv, ptave of SUBROUTINE
lwv, kuaer of SUBROUTINE lwvd, nq of SUBROUTINE initphysto.

Revision 145 - Directory Listing
Modified Tue Jun 16 15:23:29 2015 UTC (8 years, 11 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

Renamed bibio to misc.

In procedure fxhyp, use the fact that xf is an odd function of xtild.

In procedure invert_zoom_x, replace linear search in xf by
bisection. Also, use result from previous loop iteration as initial
guess. Variable "it" cannot be equal to 2 * nmax after search.

Unused arguments: hm of cv3_feed; ph, qnk, tv,tvp of cv3_mixing; ppsol
of lw; rconst, temp of vdif_kcay; rconst, plev, temp, ustar, l_mix of
yamada.

Revision 139 - Directory Listing
Modified Tue May 26 17:46:03 2015 UTC (8 years, 11 months ago) by guez
Original Path: trunk/Sources/phylmd/Radlwsw

dynetat0 read rlonu, rlatu, rlonv, rlatv, cu_2d, cv_2d, aire_2d from
"start.nc" and then these variables were overwritten by
inigeom. Corrected this. Now, inigeom does not compute rlonu, rlatu,
rlonv and rlatv. Moreover, cu_2d, cv_2d, aire_2d are not written to
"restart.nc". Since xprimu, xprimv, xprimm025, xprimp025, rlatu1,
rlatu2, yprimu1, yprimu2 are computed at the same time as rlonu,
rlatu, rlonv, rlatv, and since it would not be convenient to separate
those computations, we decide to write xprimu, xprimv, xprimm025,
xprimp025, rlatu1, rlatu2, yprimu1, yprimu2 into "restart.nc", read
them from "start.nc" and not compute them in inigeom. So, in summary,
"start.nc" contains all the coordinates and their derivatives, and
inigeom only computes the 2D-variables.

Technical details:

Moved variables rlatu, rlonv, rlonu, rlatv, xprimu, xprimv from module
comgeom to module dynetat0_m. Upgraded local variables rlatu1,
yprimu1, rlatu2, yprimu2, xprimm025, xprimp025 of procedure inigeom to
variables of module dynetat0_m.

Removed unused local variable yprimu of procedure inigeom and
corresponding argument yyprimu of fyhyp.

Moved variables clat, clon, grossismx, grossismy, dzoomx, dzoomy,
taux, tauy from module serre to module dynetat0_m (since they are read
from "start.nc"). The default values are now defined in read_serre
instead of in the declarations. Changed name of module serre to
read_serre_m, no more module variable here.

The calls to fxhyp and fyhyp are moved from inigeom to etat0.

Side effects in programs other than gcm: etat0 and read_serre write
variables of module dynetat0; the programs test_fxyp and
test_inter_barxy need more source files.

Removed unused arguments len and nd of cv3_tracer. Removed unused
argument PPSOL of LWU.

Bug fix in test_inter_barxy: forgotten call to read_serre.

Revision 118 - Directory Listing
Modified Thu Dec 18 17:30:24 2014 UTC (9 years, 4 months ago) by guez

In file grilles_gcm.nc, renamed variable phis to orog, deleted
variable presnivs.

Removed variable bug_ozone from module clesphys.

In procedure ozonecm, moved computation of sint and cost out of the
loops on horizontal position and vertical level. Inverted the order of
the two loops. We can then move all computations from slat to aprim
out of the loop on vertical levels. Created variable slat2, following
LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12
from radlwsw to ozonecm, following LMDZ.

Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq,
pmflxr, pmflxs, prfl, psfl of phytrac.

In procedure yamada4, for all the arrays, replaced the dimension klon
by ngrid. At the end of the procedure, for the computation of kmn,kn,
kq and q2, changed the upper limit of the loop index from klon to ngrid.

In radlwsw, for the calculation of pozon, removed the factor
paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the
factor 101325.0/PPSOL(JL), as in LMDZ.

Revision 81 - Directory Listing
Modified Wed Mar 5 14:38:41 2014 UTC (10 years, 2 months ago) by guez

 Converted to free source form files which were still in fixed source
form. The conversion was done using the polish mode of the NAG Fortran
Compiler.

In addition to converting to free source form, the processing of the
files also:

-- indented the code (including comments);

-- set Fortran keywords to uppercase, and set all other identifiers
to lower case;

-- added qualifiers to end statements (for example "end subroutine
conflx", instead of "end");

-- changed the terminating statements of all DO loops so that each
loop ends with an ENDDO statement (instead of a labeled continue).

Revision 72 - Directory Listing
Modified Tue Jul 23 13:00:07 2013 UTC (10 years, 9 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

NaN to signalling NaN in gfortran_debug.mk.

Removed unused procedures in getincom and getincom2. In procedure
conf_interface, replaced call to getincom by new namelist. Moved
procedure conf_interface into module interface_surf.

Added variables sig1 and w01 to startphy.nc and restartphy.nc, for
procedure cv_driver. Renamed (ema_)?work1 and (ema_)?work2 to sig1 and
w01 in concvl and physiq.

Deleted unused arguments of clmain, clqh and intersurf_hq, among which
(y)?sollwdown. Following LMDZ, in physiq, read sollw instead of
sollwdown from startphy.nc, write sollw instead of sollwdown to
restartphy.nc.

In procedure sw, initialized zfs[ud][pn]a[di], for runs where ok_ade
and ok_aie are false. (Following LMDZ.)

Added dimension klev to startphy.nc and restartphy.nc, and deleted
dimension horizon_vertical. Made t_ancien and q_ancien two-dimensional
NetCDF variables. Bug fix: in phyetat0, define ratqs, clwcon and
rnebcon for vertical levels >=2.

Bug fix: set mfg, p[de]n_[ud] to 0. when iflag_con >= 3. (Following LMDZ.)

Revision 71 - Directory Listing
Modified Mon Jul 8 18:12:18 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

No reason to call inidissip in ce0l.

In inidissip, set random seed to 1 beacuse PGI compiler does not
accept all zeros.

dq was computed needlessly in caladvtrac. Arguments masse and dq of
calfis not used.

Replaced real*8 by double precision.

Pass arrays with inverted order of vertical levels to conflx instead
of creating local variables for this inside conflx.

Revision 70 - Directory Listing
Modified Mon Jun 24 15:39:52 2013 UTC (10 years, 10 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

In procedure, "addfi" access directly the module variable "dtphys"
instead of going through an argument.

In "conflx", do not create a local variable for temperature with
reversed order of vertical levels. Instead, give an actual argument
with reversed order in "physiq".

Changed names of variables "rmd" and "rmv" from module "suphec_m" to
"md" and "mv".

In "hgardfou", print only the first temperature out of range found.

Revision 69 - Directory Listing
Modified Mon Feb 18 16:33:12 2013 UTC (11 years, 2 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from
module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and
rad_chau2 from module nuagecom to module conf_phys_m.

Read clesphys2_nml from conf_phys instead of gcm.

Removed argument iflag_con from several procedures. Access module
variable instead.

Revision 62 - Directory Listing
Modified Thu Jul 26 14:37:37 2012 UTC (11 years, 9 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

Changed handling of compiler in compilation system.

Removed the prefix letters "y", "p", "t" or "z" in some names of variables.

Replaced calls to NetCDF by calls to NetCDF95.

Extracted "ioget_calendar" procedures from "calendar.f90" into a
separate file.

Extracted to a separate file, "mathop2.f90", procedures that were not
part of the generic interface "mathop" in "mathop.f90".

Removed computation of "dq" in "bilan_dyn", which was not used.

In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not
compatible with declarations of array sizes.

In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed
the size of some arrays from "klon" to "knon".

Removed possible call to "conema3" in "physiq".

Removed unused argument "cd" in "yamada".

Revision 52 - Directory Listing
Modified Fri Sep 23 12:28:01 2011 UTC (12 years, 7 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

Split "conflx.f" into single-procedure files in directory "Conflx".

Split "cv_routines.f" into single-procedure files in directory
"CV_routines". Made module "cvparam" from included file
"cvparam.h". No included file other than "netcdf.inc" left in LMDZE.

Revision 38 - Directory Listing
Modified Thu Jan 6 17:52:19 2011 UTC (13 years, 4 months ago) by guez
Original Path: trunk/libf/phylmd/Radlwsw

Extracted ASCII art from "inigeom" into a separate text file in the
documentation.

"test_disvert" now creates a separate file for layer thicknesses.

Moved variables from module "yomcst" to module "suphec_m" because this
is where those variables are defined. Kept in "yomcst" only parameters
of Earth orbit. Gave the attribute "parameter" to some variables of
module "suphec_m".

Variables of module "yoethf" were defined in procedure "suphec". Moved
these definitions to a new procedure "yoethf" in module "yoethf_m".

	ViewVC Help
Powered by ViewVC 1.1.21