Parent Directory
| 
Revision Log
| Sticky Revision: |
Move files containing pbl_surface and procedures called by pbl_surface to directory Interface_surf.
Move Sources/* to root directory.
In clvent, clearer to use ven rather than local_ven if possible. In physiq, igwd was useless.
Use separate variables for eddy diffusion and drag coefficient in clvent (following LMDZ).
Use iflag_pbl from module conf_phys in yamada4 instead of getting it as argument. In clvent, simplifications using the fact that zx_alf2 = 0 and zx_alf1 = 1 (discarding the possibility to change this). In physiq, no need for temporary variables z[uv]strph: compute actual arguments of aaam_bud directly.
Rename phisinit to phis in restart.nc: clearer, same name as Fortran variable. In aaam_bud, use rlat and rlon from phyetat0_m instead of having these module variables associated to actual arguments in physiq. In clmain, too many wind variables make the procedure hard to understand. Use yu(:knon, 1) and yv(:knon, 1) instead of u1lay(:knon) and v1lay(:knon). Note that when yu(:knon, 1) and yv(:knon, 1) are used as actual arguments, they are probably copied to new arrays since the elements are not contiguous. Rename yu10m to wind10m because this is the norm of wind vector, not its zonal component. Rename yustar to ustar. Rename uzon and vmer to u1 and v1 since these are wind components at first layer and u1 and v1 are the names of corresponding dummy arguments in stdlevvar. In clmain, rename yzlev to zlev. In clmain, screenc, stdlevvar and coefcdrag, remove the code corresponding to zxli true (not used in LMDZ either). Subroutine ustarhb becomes a function. Simplifications using the fact that zx_alf2 = 0 and zx_alf1 = 1 (discarding the possibility to change this). In procedure vdif_kcay, remove unused dummy argument plev. Remove useless computations of sss and sssq. In clouds_gno, exp(100.) would overflow in single precision. Set maximum to exp(80.) instead. In physiq, use u(:, 1) and v(:, 1) as arguments to phytrac instead of creating ad hoc variables yu1 and yv1. In stdlevvar, rename dummy argument u_10m to wind10m, following the corresponding modification in clmain. Simplifications using the fact that ok_pred = 0 and ok_corr = 1 (discarding the possibility to change this).
LMDZE is now in Fortran 2003 (use of allocatable arguments). gradsdef was not used. Change names: [uv]10m to [uv]10m_srf in clmain, y[uv]1 to [uv]1lay. Remove useless complication: zx_alf[12]. Do not modify [uv]1lay after initial definition from [uv]. Add [uv]10m_srf to output. Change names in physiq: [uv]10m to [uv]10m_srf, z[uv]10m to [uv]10m, corresponding to NetCDF output names. Remove unused complication couchelimite and useless variable inirnpb in phytrac.
Removed dimension klev of flux_[tquv] and y_flux_[tquv] in clmain. Removed dimension klev of flux_[tquv] in physiq. Removed dimension klev of flux_[tq] in hbtm. Removed dimension klev of flux_[tq] in clqh and computations for layers other than the surface layer. Removed dimension klev of flux_v in clvent and computations for layers other than the surface layer. Values for layers other than the surface layer were not used nor output (not even in LMDZ). Removed argument dnwd0 of concvl. Simply write - mp in physiq (following LMDZ). Removed useless intermediary variables zxflux[tquv] in physiq.
Promoted lmt_pas from local variable of physiq to variable of module conf_gcm_m. Removed variable run_off of module interface_surf. Was not used. Called run_off_ter in LMDZ, but not used nor printed there either. Simplified logic in interfoce_lim. The way it was convoluted with interfsurf_hq and clmain was quite a mess. Extracted reading of SST into a separate procedure: read_sst. We do not need SST and pctsrf_new at the same time: SST is not needed for sea-ice surface. I did not like this programming: going through the procedure repeatedly for different purposes and testing inside whether there was something to do or it was already done. Reading is now only controlled by itap and lmt_pas, instead of debut, jour, jour_lu and deja_lu. Now we do not copy from pct_tmp to pctsrf_new every time step. Simplified processing of pctsrf in clmain and below. It was quite troubling: pctsrf_new was intent out in interfoce_lim but only defined for ocean and sea-ice. Also the idea of having arrays for all surfaces, pcsrf and pctsrf_new, in interfsurf_hq, which is called for a particular surface, was troubling. pctsrf_new for all surfaces was intent out in intefsurf_hq, but not defined for all surfaces at each call. Removed argument pctsrf_new of clmain: was a duplicate of pctsrf on output, and not used in physiq. Replaced pctsrf_new in clmain by pctsrf_new_oce and pctsrf_new_sic, which were the only ones modified.
Sources inside, compilation outside.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
In procedure, "addfi" access directly the module variable "dtphys" instead of going through an argument. In "conflx", do not create a local variable for temperature with reversed order of vertical levels. Instead, give an actual argument with reversed order in "physiq". Changed names of variables "rmd" and "rmv" from module "suphec_m" to "md" and "mv". In "hgardfou", print only the first temperature out of range found.
Changed handling of compiler in compilation system. Removed the prefix letters "y", "p", "t" or "z" in some names of variables. Replaced calls to NetCDF by calls to NetCDF95. Extracted "ioget_calendar" procedures from "calendar.f90" into a separate file. Extracted to a separate file, "mathop2.f90", procedures that were not part of the generic interface "mathop" in "mathop.f90". Removed computation of "dq" in "bilan_dyn", which was not used. In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not compatible with declarations of array sizes. In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed the size of some arrays from "klon" to "knon". Removed possible call to "conema3" in "physiq". Removed unused argument "cd" in "yamada".
Write used namelists to file "" instead of standard output. Avoid aliasing in "inidissip" in calls to "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Add a degenerate dimension to arrays so they have rank 3, like the dummy arguments in "divgrad2", "divgrad", "gradiv2", "gradiv", "nxgraro2" and "nxgrarot". Extract the initialization part from "bilan_dyn" and make a separate procedure, "init_dynzon", from it. Move variables from modules "iniprint" and "logic" to module "conf_gcm_m". Promote internal procedures of "fxy" to private procedures of module "fxy_m". Extracted documentation from "inigeom". Removed useless "save" attributes. Removed useless intermediate variables. Extracted processing of poles from loop on latitudes. Write coordinates to file "longitude_latitude.txt" instead of standard output. Do not use ozone tracer for radiative transfer.
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |