Parent Directory
| 
Revision Log
| Sticky Revision: |
In file grilles_gcm.nc, renamed variable phis to orog, deleted variable presnivs. Removed variable bug_ozone from module clesphys. In procedure ozonecm, moved computation of sint and cost out of the loops on horizontal position and vertical level. Inverted the order of the two loops. We can then move all computations from slat to aprim out of the loop on vertical levels. Created variable slat2, following LMDZ. Moved the limitation of column-density of ozone in cell at 1e-12 from radlwsw to ozonecm, following LMDZ. Removed unused arguments u, albsol, rh, cldfra, rneb, diafra, cldliq, pmflxr, pmflxs, prfl, psfl of phytrac. In procedure yamada4, for all the arrays, replaced the dimension klon by ngrid. At the end of the procedure, for the computation of kmn,kn, kq and q2, changed the upper limit of the loop index from klon to ngrid. In radlwsw, for the calculation of pozon, removed the factor paprs(iof+i, 1)/101325, as in LMDZ. In procedure sw, removed the factor 101325.0/PPSOL(JL), as in LMDZ.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and rad_chau2 from module nuagecom to module conf_phys_m. Read clesphys2_nml from conf_phys instead of gcm. Removed argument iflag_con from several procedures. Access module variable instead.
Split "flincom.f90" into "flinclo.f90", "flinfindcood.f90",
"flininfo.f90" and "flinopen_nozoom.f90", in directory
"IOIPSL/Flincom".
Renamed "etat0_lim" to "ce0l", as in LMDZ.
Split "readsulfate.f" into "readsulfate.f90", "readsulfate_preind.f90"
and "getso4fromfile.f90".
In etat0, renamed variable q3d to q, as in "dynredem1". Replaced calls
to Flicom procedures by calls to NetCDF95.
In leapfrog, added call to writehist.
Extracted ASCII art from "grid_noro" into a file
"grid_noro.txt". Transformed explicit-shape local arrays into
automatic arrays, so that test on values of iim and jjm is no longer
needed. Test on weight:
IF (weight(ii, jj) /= 0.) THEN
is useless. There is already a test before:
if (any(weight == 0.)) stop "zero weight in grid_noro"
In "aeropt", replaced duplicated lines with different values of inu by
a loop on inu.
Removed arguments of "conf_phys". Corresponding variables are now
defined in "physiq", in a namelist. In "conf_phys", read a namelist
instead of using getin.
Changed handling of compiler in compilation system. Removed the prefix letters "y", "p", "t" or "z" in some names of variables. Replaced calls to NetCDF by calls to NetCDF95. Extracted "ioget_calendar" procedures from "calendar.f90" into a separate file. Extracted to a separate file, "mathop2.f90", procedures that were not part of the generic interface "mathop" in "mathop.f90". Removed computation of "dq" in "bilan_dyn", which was not used. In "iniadvtrac", removed schemes 20 Slopes and 30 Prather. Was not compatible with declarations of array sizes. In "clcdrag", "ustarhb", "vdif_kcay", "yamada4" and "coefkz", changed the size of some arrays from "klon" to "knon". Removed possible call to "conema3" in "physiq". Removed unused argument "cd" in "yamada".
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
Imported Source files of the external library "IOIPSL_Lionel" into "libf/IOIPSL". Split "cray.f90" into "scopy.f90" and "ssum.f90". Rewrote "leapfrog" in order to have a clearer algorithmic structure.
Created rule for "compare_sampl_*" files in "Documentation/Manuel_LMDZE.texfol/Graphiques/GNUmakefile". Extracted "qcheck", "radiornpb", "minmaxqfi" into separate files. Read pressure coordinate of ozone coefficients once per run instead of every day. Added some "intent" attributes. Added argument "nq" to "ini_histday". Replaced calls to "gr_fi_ecrit" by calls to "gr_phy_write_2d". "Sigma_O3_Royer" is written to "histday.nc" only if "nq >= 4". Moved "ini_histrac" to module "ini_hist". Compute "zmasse" in "physiq", pass it to "phytrac". Removed computations of "pftsol*" and "ppsrf*" in "phytrac". Do not use variable "rg" from module "YOMCST" in "TLIFT".
-- Minor modification of input/output: Created procedure "read_logic". Variables of module "logic" are read by "read_logic" instead of "conf_gcm". Variable "offline" of module "conf_gcm" is read from namelist instead of "*.def". Deleted arguments "dtime", "co2_ppm_etat0", "solaire_etat0", "tabcntr0" and local variables "radpas", "tab_cntrl" of "phyetat0". "phyetat0" does not read "controle" in "startphy.nc" any longer. "phyetat0" now reads global attribute "itau_phy" from "startphy.nc". "phyredem" does not create variable "controle" in "startphy.nc" any longer. "phyredem" now writes global attribute "itau_phy" of "startphy.nc". Deleted argument "tabcntr0" of "printflag". Removed diagnostic messages written by "printflag" for comparison of the variable "controle" of "startphy.nc" and the variables read from "*.def" or namelist input. -- Removing unwanted functionality: Removed variable "lunout" from module "iniprint", replaced everywhere by standard output. Removed case "ocean == 'couple'" in "clmain", "interfsurf_hq" and "physiq". Removed procedure "interfoce_cpl". -- Should not change anything at run time: Automated creation of graphs in documentation. More documentation on input files. Converted Fortran files to free format: "phyredem.f90", "printflag.f90". Split module "clesphy" into "clesphys" and "clesphys2". Removed variables "conser", "leapf", "forward", "apphys", "apdiss" and "statcl" from module "logic". Added arguments "conser" to "advect", "leapf" to "integrd". Added local variables "forward", "leapf", "apphys", "conser", "apdiss" in "leapfrog". Added intent attributes. Deleted arguments "dtime" of "phyredem", "pdtime" of "flxdtdq", "sh" of "phytrac", "dt" of "yamada". Deleted local variables "dtime", "co2_ppm_etat0", "solaire_etat0", "length", "tabcntr0" in "physiq". Replaced all references to "dtime" by references to "pdtphys".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |