Parent Directory
| 
Revision Log
| Links to HEAD: | (view) (annotate) |
| Sticky Revision: |
Remove intermediate variables in `pbl_surface` Remove file `diagcld2.f90`, no longer used since revision 340. In procedure cdrag, rename zcdn to cdn. In procedure `interfsurf_hq`, rename `temp_air` to t1lay: this is the corresponding name in `calcul_fluxs`, is consistent with the other names `[uvq]1lay` and is more precise. In procedure `pbl_surface`, rename t and q to `t_seri` and `q_seri`, which are the names in procedure physiq. Remove needless intermediate variables qair1, tairsol, psfce, patm and zgeo1. Remove useless initialization of yrugos. Remove a useless assignment `i = ni(j)`.
Simplify newmicro and rename dummy arguments Rename dummy argument ucov of procedure advect to ang_3d. Rename dummy argument radliq of procedure fisrtilp to cldliq. Rename dummy argument qlwp of procedure newmicro to cldliq. Motivation: same name across procedures. Remove useless intermediary local variable rel in procedure newmicro. The value of rad_chaud can be used instead of 1 in the computation of cldtau if zflwp is 0: it does not matter.
In procedure newmicro, rename dummy argument cltau to cldtau. In procedure nuage, rename dummy argument pcltau to cldtau. In procedure radlwsw, rename dummy argument cldtaupd to cldtau. Motivation: same variable name across procedures. In procedure newmicro, no need for arrays zflwp and zfiwp: scalars are sufficient (following LMDZ).
Change all `.f` suffixes to `.f90`. (The opposite was done in revision 82.) Because of change of philosopy in GNUmakefile: we already had a rewritten rule for `.f`, so it does not make the makefile longer to replace it by a rule for `.f90`. And it spares us options of makedepf90 and of the compiler. Also we prepare the way for a simpler `CMakeLists.txt`.
Move Sources/* to root directory.
run_off_lic downgraded from variable of module interface_surf to local variable of fonte_neige. Code could not work with ok_aie set to true, so removed this possibility. tauae, piz_ae, cg_ae, topswai, solswai were then 0. cldtaupi was the same as cldtaupd. In sw and procedures called by sw, flag_aer did not need to be double precision, changed it to logical. Downgraded re and fl from arguments of newmicro to local variables. Added output of re and fl (following LMDZ).
Added argument itau_phy to ini_histins, phyetat0, phytrac and phyredem0. Removed variable itau_phy of module temps. Avoiding side effect in etat0 and phyetat0. The procedures ini_histins, phyetat0, phytrac and phyredem0 are all called by physiq so there is no cascading variable penalty. In procedure inifilr, made the condition on colat0 weaker to allow for rounding error. Removed arguments flux_o, flux_g and t_slab of clmain, flux_o and flux_g of clqh and interfsurf_hq, tslab and seaice of phyetat0 and phyredem. NetCDF variables TSLAB and SEAICE no longer in restartphy.nc. All these variables were related to the not-implemented slab ocean. seaice and tslab were just set to 0 in phyetat0 and never used nor changed. flux_o and flux_g were computed in clmain but never used in physiq. Removed argument swnet of clqh. Was used only to compute a local variable, swdown, which was not used.
Sources inside, compilation outside.
Changed all ".f90" suffixes to ".f".
Moved everything out of libf.
Deleted files cvparam3.f90 and nuagecom.f90. Moved variables from module cvparam3 to module cv3_param_m. Moved variables rad_chau1 and rad_chau2 from module nuagecom to module conf_phys_m. Read clesphys2_nml from conf_phys instead of gcm. Removed argument iflag_con from several procedures. Access module variable instead.
Split "flincom.f90" into "flinclo.f90", "flinfindcood.f90",
"flininfo.f90" and "flinopen_nozoom.f90", in directory
"IOIPSL/Flincom".
Renamed "etat0_lim" to "ce0l", as in LMDZ.
Split "readsulfate.f" into "readsulfate.f90", "readsulfate_preind.f90"
and "getso4fromfile.f90".
In etat0, renamed variable q3d to q, as in "dynredem1". Replaced calls
to Flicom procedures by calls to NetCDF95.
In leapfrog, added call to writehist.
Extracted ASCII art from "grid_noro" into a file
"grid_noro.txt". Transformed explicit-shape local arrays into
automatic arrays, so that test on values of iim and jjm is no longer
needed. Test on weight:
IF (weight(ii, jj) /= 0.) THEN
is useless. There is already a test before:
if (any(weight == 0.)) stop "zero weight in grid_noro"
In "aeropt", replaced duplicated lines with different values of inu by
a loop on inu.
Removed arguments of "conf_phys". Corresponding variables are now
defined in "physiq", in a namelist. In "conf_phys", read a namelist
instead of using getin.
Split "conflx.f" into single-procedure files in directory "Conflx". Split "cv_routines.f" into single-procedure files in directory "CV_routines". Made module "cvparam" from included file "cvparam.h". No included file other than "netcdf.inc" left in LMDZE.
Extracted ASCII art from "inigeom" into a separate text file in the documentation. "test_disvert" now creates a separate file for layer thicknesses. Moved variables from module "yomcst" to module "suphec_m" because this is where those variables are defined. Kept in "yomcst" only parameters of Earth orbit. Gave the attribute "parameter" to some variables of module "suphec_m". Variables of module "yoethf" were defined in procedure "suphec". Moved these definitions to a new procedure "yoethf" in module "yoethf_m".
Added NetCDF directory "/home/guez/include" in "g95.mk" and "nag_tools.mk". Added some "intent" attributes in "PVtheta", "advtrac", "caladvtrac", "calfis", "diagedyn", "dissip", "vlspltqs", "aeropt", "ajsec", "calltherm", "clmain", "cltrac", "cltracrn", "concvl", "conema3", "conflx", "fisrtilp", "newmicro", "nuage", "diagcld1", "diagcld2", "drag_noro", "lift_noro", "SUGWD", "physiq", "phytrac", "radlwsw", "thermcell". Removed the case "ierr == 0" in "abort_gcm"; moved call to "histclo" and messages for end of run from "abort_gcm" to "gcm"; replaced call to "abort_gcm" in "leapfrog" by exit from outer loop. In "calfis": removed argument "pp" and variable "unskap"; changed "pksurcp" from scalar to rank 2; use "pressure_var"; rewrote computation of "zplev", "zplay", "ztfi", "pcvgt" using "dyn_phy"; added computation of "pls". Removed unused variable in "dynredem0". In "exner_hyb": changed "dellta" from scalar to rank 1; replaced call to "ssum" by call to "sum"; removed variables "xpn" and "xps"; replaced some loops by array expressions. In "leapfrog": use "pressure_var"; deleted variables "p", "longcles". Converted common blocks "YOECUMF", "YOEGWD" to modules. Removed argument "pplay" in "cvltr", "diagetpq", "nflxtr". Created module "raddimlw" from include file "raddimlw.h". Corrected call to "new_unit" in "test_disvert".
Initial import
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.21 |