/[lmdze]/trunk/phylmd/phyetat0.f90
ViewVC logotype

Annotation of /trunk/phylmd/phyetat0.f90

Parent Directory Parent Directory | Revision Log Revision Log


Revision 278 - (hide annotations)
Thu Jul 12 17:53:18 2018 UTC (5 years, 10 months ago) by guez
Original Path: trunk/phylmd/phyetat0.f
File size: 12182 byte(s)
Created procedure phyetat0_new to avoid side effects on variables of
module phyetat0_m. Had then to change test_ozonecm: read rlat from
netCDF file instead of specifying it in test_ozonecm.

1 guez 3 module phyetat0_m
2    
3 guez 15 use dimphy, only: klon
4 guez 12
5 guez 3 IMPLICIT none
6    
7 guez 278 REAL, save, protected:: rlat(klon), rlon(klon)
8 guez 138 ! latitude and longitude of a point of the scalar grid identified
9     ! by a simple index, in degrees
10 guez 3
11 guez 278 integer, save, protected:: itau_phy
12     REAL, save, protected:: zmasq(KLON) ! fraction of land
13 guez 191
14 guez 15 private klon
15 guez 3
16     contains
17    
18 guez 207 SUBROUTINE phyetat0(pctsrf, ftsol, ftsoil, qsurf, qsol, snow, albe, evap, &
19 guez 175 rain_fall, snow_fall, solsw, sollw, fder, radsol, frugs, agesno, zmea, &
20     zstd, zsig, zgam, zthe, zpic, zval, t_ancien, q_ancien, ancien_ok, &
21 guez 191 rnebcon, ratqs, clwcon, run_off_lic_0, sig1, w01, ncid_startphy)
22 guez 3
23 guez 49 ! From phylmd/phyetat0.F, version 1.4 2005/06/03 10:03:07
24     ! Author: Z.X. Li (LMD/CNRS)
25 guez 50 ! Date: 1993/08/18
26 guez 69 ! Objet : lecture de l'état initial pour la physique
27 guez 3
28 guez 191 USE conf_gcm_m, ONLY: raz_date
29 guez 276 use dimphy, only: klev
30 guez 69 USE dimsoil, ONLY : nsoilmx
31 guez 12 USE indicesol, ONLY : epsfra, is_lic, is_oce, is_sic, is_ter, nbsrf
32 guez 175 use netcdf, only: nf90_global, nf90_inq_varid, NF90_NOERR, NF90_NOWRITE
33 guez 178 use netcdf95, only: nf95_get_att, nf95_get_var, nf95_inq_varid, &
34     nf95_inquire_variable, NF95_OPEN
35 guez 12
36 guez 175 REAL, intent(out):: pctsrf(klon, nbsrf)
37 guez 207 REAL, intent(out):: ftsol(klon, nbsrf)
38     REAL, intent(out):: ftsoil(klon, nsoilmx, nbsrf)
39 guez 175 REAL, intent(out):: qsurf(klon, nbsrf)
40 guez 215
41     REAL, intent(out):: qsol(:)
42     ! (klon) column-density of water in soil, in kg m-2
43    
44 guez 175 REAL, intent(out):: snow(klon, nbsrf)
45     REAL, intent(out):: albe(klon, nbsrf)
46     REAL, intent(out):: evap(klon, nbsrf)
47 guez 62 REAL, intent(out):: rain_fall(klon)
48 guez 175 REAL, intent(out):: snow_fall(klon)
49     real, intent(out):: solsw(klon)
50 guez 72 REAL, intent(out):: sollw(klon)
51 guez 175 real, intent(out):: fder(klon)
52     REAL, intent(out):: radsol(klon)
53     REAL, intent(out):: frugs(klon, nbsrf)
54     REAL, intent(out):: agesno(klon, nbsrf)
55 guez 174 REAL, intent(out):: zmea(klon)
56 guez 13 REAL, intent(out):: zstd(klon)
57     REAL, intent(out):: zsig(klon)
58 guez 175 REAL, intent(out):: zgam(klon)
59     REAL, intent(out):: zthe(klon)
60     REAL, intent(out):: zpic(klon)
61     REAL, intent(out):: zval(klon)
62     REAL, intent(out):: t_ancien(klon, klev), q_ancien(klon, klev)
63 guez 49 LOGICAL, intent(out):: ancien_ok
64 guez 175 real, intent(out):: rnebcon(klon, klev), ratqs(klon, klev)
65     REAL, intent(out):: clwcon(klon, klev), run_off_lic_0(klon)
66 guez 72 real, intent(out):: sig1(klon, klev) ! section adiabatic updraft
67 guez 3
68 guez 72 real, intent(out):: w01(klon, klev)
69     ! vertical velocity within adiabatic updraft
70 guez 3
71 guez 191 integer, intent(out):: ncid_startphy
72 guez 157
73 guez 72 ! Local:
74     REAL fractint(klon)
75 guez 157 INTEGER varid, ndims
76 guez 156 INTEGER ierr, i
77 guez 3
78     !---------------------------------------------------------------
79    
80     print *, "Call sequence information: phyetat0"
81    
82 guez 72 ! Fichier contenant l'état initial :
83 guez 157 call NF95_OPEN("startphy.nc", NF90_NOWRITE, ncid_startphy)
84 guez 3
85 guez 191 IF (raz_date) then
86     itau_phy = 0
87     else
88     call nf95_get_att(ncid_startphy, nf90_global, "itau_phy", itau_phy)
89     end IF
90 guez 3
91     ! Lecture des latitudes (coordonnees):
92    
93 guez 157 call NF95_INQ_VARID(ncid_startphy, "latitude", varid)
94     call NF95_GET_VAR(ncid_startphy, varid, rlat)
95 guez 3
96     ! Lecture des longitudes (coordonnees):
97    
98 guez 157 call NF95_INQ_VARID(ncid_startphy, "longitude", varid)
99     call NF95_GET_VAR(ncid_startphy, varid, rlon)
100 guez 3
101     ! Lecture du masque terre mer
102    
103 guez 157 call NF95_INQ_VARID(ncid_startphy, "masque", varid)
104     call nf95_get_var(ncid_startphy, varid, zmasq)
105 guez 101
106 guez 3 ! Lecture des fractions pour chaque sous-surface
107    
108     ! initialisation des sous-surfaces
109    
110     pctsrf = 0.
111    
112     ! fraction de terre
113    
114 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "FTER", varid)
115 guez 50 IF (ierr == NF90_NOERR) THEN
116 guez 157 call nf95_get_var(ncid_startphy, varid, pctsrf(:, is_ter))
117 guez 3 else
118 guez 43 PRINT *, 'phyetat0: Le champ <FTER> est absent'
119 guez 3 ENDIF
120    
121     ! fraction de glace de terre
122    
123 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "FLIC", varid)
124 guez 50 IF (ierr == NF90_NOERR) THEN
125 guez 157 call nf95_get_var(ncid_startphy, varid, pctsrf(:, is_lic))
126 guez 3 else
127 guez 43 PRINT *, 'phyetat0: Le champ <FLIC> est absent'
128 guez 3 ENDIF
129    
130     ! fraction d'ocean
131    
132 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "FOCE", varid)
133 guez 50 IF (ierr == NF90_NOERR) THEN
134 guez 157 call nf95_get_var(ncid_startphy, varid, pctsrf(:, is_oce))
135 guez 3 else
136 guez 43 PRINT *, 'phyetat0: Le champ <FOCE> est absent'
137 guez 3 ENDIF
138    
139     ! fraction glace de mer
140    
141 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "FSIC", varid)
142 guez 50 IF (ierr == NF90_NOERR) THEN
143 guez 157 call nf95_get_var(ncid_startphy, varid, pctsrf(:, is_sic))
144 guez 3 else
145 guez 43 PRINT *, 'phyetat0: Le champ <FSIC> est absent'
146 guez 3 ENDIF
147    
148 guez 50 ! Verification de l'adequation entre le masque et les sous-surfaces
149 guez 3
150 guez 50 fractint = pctsrf(:, is_ter) + pctsrf(:, is_lic)
151 guez 3 DO i = 1 , klon
152 guez 50 IF ( abs(fractint(i) - zmasq(i) ) > EPSFRA ) THEN
153 guez 203 print *, 'phyetat0: attention fraction terre pas ', &
154     'coherente ', i, zmasq(i), pctsrf(i, is_ter), pctsrf(i, is_lic)
155 guez 3 ENDIF
156     END DO
157 guez 50 fractint = pctsrf(:, is_oce) + pctsrf(:, is_sic)
158 guez 3 DO i = 1 , klon
159 guez 50 IF ( abs( fractint(i) - (1. - zmasq(i))) > EPSFRA ) THEN
160 guez 203 print *, 'phyetat0 attention fraction ocean pas ', &
161     'coherente ', i, zmasq(i) , pctsrf(i, is_oce), pctsrf(i, is_sic)
162 guez 3 ENDIF
163     END DO
164    
165     ! Lecture des temperatures du sol:
166 guez 157 call NF95_INQ_VARID(ncid_startphy, "TS", varid)
167     call nf95_inquire_variable(ncid_startphy, varid, ndims = ndims)
168 guez 101 if (ndims == 2) then
169 guez 207 call NF95_GET_VAR(ncid_startphy, varid, ftsol)
170 guez 101 else
171     print *, "Found only one surface type for soil temperature."
172 guez 207 call nf95_get_var(ncid_startphy, varid, ftsol(:, 1))
173     ftsol(:, 2:nbsrf) = spread(ftsol(:, 1), dim = 2, ncopies = nbsrf - 1)
174 guez 156 end if
175 guez 3
176 guez 156 ! Lecture des temperatures du sol profond:
177 guez 3
178 guez 157 call NF95_INQ_VARID(ncid_startphy, 'Tsoil', varid)
179 guez 207 call NF95_GET_VAR(ncid_startphy, varid, ftsoil)
180 guez 3
181     ! Lecture de l'humidite de l'air juste au dessus du sol:
182    
183 guez 157 call NF95_INQ_VARID(ncid_startphy, "QS", varid)
184     call nf95_get_var(ncid_startphy, varid, qsurf)
185 guez 3
186 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "QSOL", varid)
187 guez 50 IF (ierr == NF90_NOERR) THEN
188 guez 157 call nf95_get_var(ncid_startphy, varid, qsol)
189 guez 3 else
190 guez 43 PRINT *, 'phyetat0: Le champ <QSOL> est absent'
191 guez 50 PRINT *, ' Valeur par defaut nulle'
192 guez 43 qsol = 0.
193 guez 3 ENDIF
194    
195     ! Lecture de neige au sol:
196    
197 guez 157 call NF95_INQ_VARID(ncid_startphy, "SNOW", varid)
198     call nf95_get_var(ncid_startphy, varid, snow)
199 guez 3
200     ! Lecture de albedo au sol:
201    
202 guez 157 call NF95_INQ_VARID(ncid_startphy, "ALBE", varid)
203     call nf95_get_var(ncid_startphy, varid, albe)
204 guez 3
205 guez 50 ! Lecture de evaporation:
206 guez 3
207 guez 157 call NF95_INQ_VARID(ncid_startphy, "EVAP", varid)
208     call nf95_get_var(ncid_startphy, varid, evap)
209 guez 3
210     ! Lecture precipitation liquide:
211    
212 guez 157 call NF95_INQ_VARID(ncid_startphy, "rain_f", varid)
213     call NF95_GET_VAR(ncid_startphy, varid, rain_fall)
214 guez 3
215     ! Lecture precipitation solide:
216    
217 guez 157 call NF95_INQ_VARID(ncid_startphy, "snow_f", varid)
218     call NF95_GET_VAR(ncid_startphy, varid, snow_fall)
219 guez 3
220     ! Lecture rayonnement solaire au sol:
221    
222 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "solsw", varid)
223 guez 49 IF (ierr /= NF90_NOERR) THEN
224 guez 43 PRINT *, 'phyetat0: Le champ <solsw> est absent'
225     PRINT *, 'mis a zero'
226 guez 3 solsw = 0.
227     ELSE
228 guez 157 call nf95_get_var(ncid_startphy, varid, solsw)
229 guez 3 ENDIF
230    
231     ! Lecture rayonnement IF au sol:
232    
233 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "sollw", varid)
234 guez 49 IF (ierr /= NF90_NOERR) THEN
235 guez 43 PRINT *, 'phyetat0: Le champ <sollw> est absent'
236     PRINT *, 'mis a zero'
237 guez 3 sollw = 0.
238     ELSE
239 guez 157 call nf95_get_var(ncid_startphy, varid, sollw)
240 guez 3 ENDIF
241    
242     ! Lecture derive des flux:
243    
244 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "fder", varid)
245 guez 49 IF (ierr /= NF90_NOERR) THEN
246 guez 43 PRINT *, 'phyetat0: Le champ <fder> est absent'
247     PRINT *, 'mis a zero'
248 guez 3 fder = 0.
249     ELSE
250 guez 157 call nf95_get_var(ncid_startphy, varid, fder)
251 guez 3 ENDIF
252    
253     ! Lecture du rayonnement net au sol:
254    
255 guez 157 call NF95_INQ_VARID(ncid_startphy, "RADS", varid)
256     call NF95_GET_VAR(ncid_startphy, varid, radsol)
257 guez 3
258     ! Lecture de la longueur de rugosite
259    
260 guez 157 call NF95_INQ_VARID(ncid_startphy, "RUG", varid)
261     call nf95_get_var(ncid_startphy, varid, frugs)
262 guez 3
263     ! Lecture de l'age de la neige:
264    
265 guez 157 call NF95_INQ_VARID(ncid_startphy, "AGESNO", varid)
266     call nf95_get_var(ncid_startphy, varid, agesno)
267 guez 3
268 guez 157 call NF95_INQ_VARID(ncid_startphy, "ZMEA", varid)
269     call NF95_GET_VAR(ncid_startphy, varid, zmea)
270 guez 3
271 guez 157 call NF95_INQ_VARID(ncid_startphy, "ZSTD", varid)
272     call NF95_GET_VAR(ncid_startphy, varid, zstd)
273 guez 3
274 guez 157 call NF95_INQ_VARID(ncid_startphy, "ZSIG", varid)
275     call NF95_GET_VAR(ncid_startphy, varid, zsig)
276 guez 3
277 guez 157 call NF95_INQ_VARID(ncid_startphy, "ZGAM", varid)
278     call NF95_GET_VAR(ncid_startphy, varid, zgam)
279 guez 3
280 guez 157 call NF95_INQ_VARID(ncid_startphy, "ZTHE", varid)
281     call NF95_GET_VAR(ncid_startphy, varid, zthe)
282 guez 3
283 guez 157 call NF95_INQ_VARID(ncid_startphy, "ZPIC", varid)
284     call NF95_GET_VAR(ncid_startphy, varid, zpic)
285 guez 3
286 guez 157 call NF95_INQ_VARID(ncid_startphy, "ZVAL", varid)
287     call NF95_GET_VAR(ncid_startphy, varid, zval)
288 guez 3
289     ancien_ok = .TRUE.
290    
291 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "TANCIEN", varid)
292 guez 49 IF (ierr /= NF90_NOERR) THEN
293 guez 43 PRINT *, "phyetat0: Le champ <TANCIEN> est absent"
294     PRINT *, "Depart legerement fausse. Mais je continue"
295 guez 3 ancien_ok = .FALSE.
296     ELSE
297 guez 157 call nf95_get_var(ncid_startphy, varid, t_ancien)
298 guez 3 ENDIF
299    
300 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "QANCIEN", varid)
301 guez 49 IF (ierr /= NF90_NOERR) THEN
302 guez 43 PRINT *, "phyetat0: Le champ <QANCIEN> est absent"
303     PRINT *, "Depart legerement fausse. Mais je continue"
304 guez 3 ancien_ok = .FALSE.
305     ELSE
306 guez 157 call nf95_get_var(ncid_startphy, varid, q_ancien)
307 guez 3 ENDIF
308    
309 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "CLWCON", varid)
310 guez 49 IF (ierr /= NF90_NOERR) THEN
311 guez 43 PRINT *, "phyetat0: Le champ CLWCON est absent"
312     PRINT *, "Depart legerement fausse. Mais je continue"
313 guez 3 clwcon = 0.
314     ELSE
315 guez 157 call nf95_get_var(ncid_startphy, varid, clwcon(:, 1))
316 guez 72 clwcon(:, 2:) = 0.
317 guez 3 ENDIF
318    
319 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "RNEBCON", varid)
320 guez 49 IF (ierr /= NF90_NOERR) THEN
321 guez 43 PRINT *, "phyetat0: Le champ RNEBCON est absent"
322     PRINT *, "Depart legerement fausse. Mais je continue"
323 guez 3 rnebcon = 0.
324     ELSE
325 guez 157 call nf95_get_var(ncid_startphy, varid, rnebcon(:, 1))
326 guez 72 rnebcon(:, 2:) = 0.
327 guez 3 ENDIF
328    
329     ! Lecture ratqs
330    
331 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "RATQS", varid)
332 guez 49 IF (ierr /= NF90_NOERR) THEN
333 guez 43 PRINT *, "phyetat0: Le champ <RATQS> est absent"
334     PRINT *, "Depart legerement fausse. Mais je continue"
335 guez 3 ratqs = 0.
336     ELSE
337 guez 157 call nf95_get_var(ncid_startphy, varid, ratqs(:, 1))
338 guez 72 ratqs(:, 2:) = 0.
339 guez 3 ENDIF
340    
341     ! Lecture run_off_lic_0
342    
343 guez 157 ierr = NF90_INQ_VARID(ncid_startphy, "RUNOFFLIC0", varid)
344 guez 49 IF (ierr /= NF90_NOERR) THEN
345 guez 43 PRINT *, "phyetat0: Le champ <RUNOFFLIC0> est absent"
346     PRINT *, "Depart legerement fausse. Mais je continue"
347 guez 3 run_off_lic_0 = 0.
348     ELSE
349 guez 157 call nf95_get_var(ncid_startphy, varid, run_off_lic_0)
350 guez 3 ENDIF
351    
352 guez 157 call nf95_inq_varid(ncid_startphy, "sig1", varid)
353     call nf95_get_var(ncid_startphy, varid, sig1)
354 guez 72
355 guez 157 call nf95_inq_varid(ncid_startphy, "w01", varid)
356     call nf95_get_var(ncid_startphy, varid, w01)
357 guez 72
358 guez 3 END SUBROUTINE phyetat0
359    
360 guez 278 !*********************************************************************
361    
362     subroutine phyetat0_new
363    
364     use nr_util, only: pi
365    
366     use dimensions, only: iim, jjm
367     use dynetat0_m, only: rlatu, rlonv
368     use grid_change, only: dyn_phy
369     USE start_init_orog_m, only: mask
370    
371     !-------------------------------------------------------------------------
372    
373     rlat(1) = 90.
374     rlat(2:klon-1) = pack(spread(rlatu(2:jjm), 1, iim), .true.) * 180. / pi
375     ! (with conversion to degrees)
376     rlat(klon) = - 90.
377    
378     rlon(1) = 0.
379     rlon(2:klon-1) = pack(spread(rlonv(:iim), 2, jjm - 1), .true.) * 180. / pi
380     ! (with conversion to degrees)
381     rlon(klon) = 0.
382    
383     zmasq = pack(mask, dyn_phy)
384     itau_phy = 0
385    
386     end subroutine phyetat0_new
387    
388 guez 3 end module phyetat0_m

  ViewVC Help
Powered by ViewVC 1.1.21