source: CMIP5/historicalGHG/historicalGHG2/COMP/lmdz.driver @ 1127

Last change on this file since 1127 was 1127, checked in by aclsce, 14 years ago

Modified as follows :

  • added GHG, ozone and land use evolution
  • constant solar and aerosols are the same as in piControl2 configuration
File size: 10.2 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function LMDZ_sed
4{
5    IGCM_debug_PushStack "LMDZ_sed"
6
7    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
8    RET=$?
9    echo "LMDZ_sed : ${1} ${2} ${3}"
10    \mv ${1}.tmp ${1}
11
12    IGCM_debug_PopStack "LMDZ_sed"
13    return $RET
14}
15
16function ATM_Initialize
17{
18    IGCM_debug_PushStack "ATM_Initialize"
19
20    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
21
22    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
23
24    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
25
26    ##-- Calendar type for LMDZ
27    case ${config_UserChoices_CalendarType} in
28        leap|gregorian)
29            CalendarTypeForLmdz=earth_366d;;
30        noleap)
31            CalendarTypeForLmdz=earth_365d;;
32        360d)
33            CalendarTypeForLmdz=earth_360d;;
34        *)
35            CalendarTypeForLmdz=earth_360d
36    esac
37
38    ##--Frequency purpose ....
39    ##--  Initialisation  ....
40    OK_instan=n
41    OK_journe=n
42    OK_mensuel=n
43    ok_hf=n
44
45    case ${config_UserChoices_PeriodLength} in
46        1Y|1y|1M|1m) OK_mensuel=y ;;
47        5D|5d|1D|1d) OK_journe=y ;;
48    esac
49
50    for frequency in ${config_ATM_WriteFrequency} ; do
51        case ${frequency} in
52            5D|5d|1D|1d) OK_journe=y ;;
53        esac
54        case ${frequency} in
55            HF|hf) ok_hf=y ;;
56        esac
57    done
58
59    ## Read LMDZ_NbPeriod_adjust option in lmdz.card
60    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_NbPeriod_adjust
61    eval LMDZ_NbPeriod_adjust=\${lmdz_UserChoices_LMDZ_NbPeriod_adjust} > /dev/null 2>&1
62
63    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
64        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_Bands_file_name
65        eval LMDZ_Bands_file_name=\${lmdz_UserChoices_LMDZ_Bands_file_name} > /dev/null 2>&1
66    fi
67
68    ##  Read LMDZ_Freq_aero and LMDZ_Length_aero in lmdz.card
69    eval LMDZ_Freq_aero=\${lmdz_UserChoices_LMDZ_Freq_aero} > /dev/null 2>&1
70    eval LMDZ_Length_aero=\${lmdz_UserChoices_LMDZ_Length_aero} > /dev/null 2>&1
71
72    ##  Read LMDZ_COSP_monthly  LMDZ_COSP_daily and LMDZ_COSP_hf in lmdz.card
73    eval LMDZ_COSP_OK=\${lmdz_UserChoices_LMDZ_COSP_OK} > /dev/null 2>&1
74    eval LMDZ_COSP_monthly=\${lmdz_UserChoices_LMDZ_COSP_monthly} > /dev/null 2>&1
75    eval LMDZ_COSP_daily=\${lmdz_UserChoices_LMDZ_COSP_daily} > /dev/null 2>&1
76    eval LMDZ_COSP_hf=\${lmdz_UserChoices_LMDZ_COSP_hf} > /dev/null 2>&1
77
78    ##  Read LMDZ_NMC_monthly  LMDZ_NMC_daily and LMDZ_NMC_hf in lmdz.card
79    eval LMDZ_NMC_monthly=\${lmdz_UserChoices_LMDZ_NMC_monthly} > /dev/null 2>&1
80    eval LMDZ_NMC_daily=\${lmdz_UserChoices_LMDZ_NMC_daily} > /dev/null 2>&1
81    eval LMDZ_NMC_hf=\${lmdz_UserChoices_LMDZ_NMC_hf} > /dev/null 2>&1
82
83    IGCM_debug_PopStack "ATM_Initialize"
84}
85
86#-----------------------------------------------------------------
87function ATM_Update
88{
89    IGCM_debug_PushStack "ATM_Update"
90
91    case ${config_UserChoices_PeriodLength} in
92        *Y|*y) 
93               LMDZ_ecrit_mth=30.
94               LMDZ_ecrit_ISCCP=30.
95               LMDZ_periodav=30.
96               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
97                  echo Change calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d
98                  exit
99               fi
100               ;;
101        *)
102               LMDZ_ecrit_mth=${PeriodLengthInDays}.
103               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
104               LMDZ_periodav=${PeriodLengthInDays}.
105               ;;
106    esac
107
108    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
109    if [ ${CumulPeriod} -eq 1 ] ; then
110        RAZ_DATE=1
111    else
112        RAZ_DATE=0
113    fi
114    ## To have more variables in output files for aerosols. Parameters are set in lmdz.card
115    if [ ${CumulPeriod}%${LMDZ_Freq_aero} -le ${LMDZ_Length_aero} ]; then
116       if [ ${CumulPeriod}%${LMDZ_Freq_aero} -ne 0 ]; then
117          lev_histmth=4
118       else
119          lev_histmth=2   
120       fi
121    else
122       lev_histmth=2
123    fi   
124
125    ## algo : For CumulPeriod=1 ;
126    ##        IF NbPeriod_Adjust = 0, Get Bands file directly from server, store it with _0 suffix
127    ##        ELSE LMDZ_adjust=y ; save Bands file on file server ;
128    ##        For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; Get Bands file from server (CumulPeriod-1) ; LMDZ_adjust=y ; save Bands file on file server ;
129    ##        For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from server (CumulPeriod=LMDZ_NbPeriod_adjust 0 to force it) ; Use Bands ;
130
131    if [ ${CumulPeriod} -eq 1 ] ; then
132        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
133            IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
134            IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
135            IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
136        fi
137    fi
138
139    LMDZ_adjust=n
140    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
141
142    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
143    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
144
145    [ ${CumulPeriod} -gt 1 ] && ( IGCM_sys_Get ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat )
146
147    ##-- GHG forcing for the current year
148    IPCC_CO2=`grep Annee_${year} CO2_1765_2005.txt | awk -F= '{print $2}'`
149    IPCC_CH4=`grep Annee_${year} CH4_1765_2005.txt | awk -F= '{print $2}'`
150    IPCC_N2O=`grep Annee_${year} N2O_1765_2005.txt | awk -F= '{print $2}'`
151    IPCC_CFC11=`grep Annee_${year} CFC11_1765_2005.txt | awk -F= '{print $2}'`
152    IPCC_CFC12=`grep Annee_${year} CFC12_1765_2005.txt | awk -F= '{print $2}'`
153
154    ## physiq.def parameters modified from initial physiq_L${RESOL_ATM_Z}
155    LMDZ_sed physiq.def OK_instan   ${OK_instan}
156    LMDZ_sed physiq.def OK_journe   ${OK_journe}
157    LMDZ_sed physiq.def OK_mensuel  ${OK_mensuel}
158    LMDZ_sed physiq.def lev_histmth ${lev_histmth}
159    LMDZ_sed physiq.def ok_hf       ${ok_hf}
160    LMDZ_sed physiq.def ecrit_mth   ${LMDZ_ecrit_mth}
161    LMDZ_sed physiq.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
162    LMDZ_sed physiq.def ok_cosp     ${LMDZ_COSP_OK}
163    LMDZ_sed physiq.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
164    LMDZ_sed physiq.def ok_journeCOSP   ${LMDZ_COSP_daily}
165    LMDZ_sed physiq.def ok_hfCOSP   ${LMDZ_COSP_hf}
166    LMDZ_sed physiq.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}"
167    LMDZ_sed physiq.def co2_ppm     ${IPCC_CO2}
168    LMDZ_sed physiq.def CH4_ppb     ${IPCC_CH4}
169    LMDZ_sed physiq.def N2O_ppb     ${IPCC_N2O}
170    LMDZ_sed physiq.def CFC11_ppt   ${IPCC_CFC11}
171    LMDZ_sed physiq.def CFC12_ppt   ${IPCC_CFC12}
172
173
174    ## gcm.def parameters : no change since gcm.def_${RESOL_ATM_3D} is used and already modified
175
176    ## run.def parameters
177    LMDZ_sed run.def dayref   ${InitDay}
178    LMDZ_sed run.def anneeref ${InitYear}
179    LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
180    LMDZ_sed run.def nday     ${PeriodLengthInDays}
181    LMDZ_sed run.def raz_date ${RAZ_DATE}
182    LMDZ_sed run.def periodav ${LMDZ_periodav}
183    LMDZ_sed run.def adjust   ${LMDZ_adjust}
184
185    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
186    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
187    eval ByPass_hgardfou_teta=\${lmdz_UserChoices_ByPass_hgardfou_teta} > /dev/null 2>&1
188    if [ ${ByPass_hgardfou_teta} = y ] ; then
189        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
190        IGCM_sys_Mv gcm.def.tmp gcm.def
191        echo
192        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
193        echo
194        cat gcm.def
195        ByPass_hgardfou_teta=n
196        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
197    fi
198
199    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
200    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats
201    eval ByPass_hgardfou_mats=\${lmdz_UserChoices_ByPass_hgardfou_mats} > /dev/null 2>&1
202    if [ ${ByPass_hgardfou_mats} = y ] ; then
203        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
204        IGCM_sys_Mv gcm.def.tmp gcm.def
205        echo
206        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
207        echo
208        cat gcm.def
209        ByPass_hgardfou_mats=n
210        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
211    fi
212
213    if ( ${FirstInitialize} ) ; then
214
215        if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
216            if [ ${DRYRUN} -le 2 ] ; then
217                ##-- suppression of ozone file construction --
218                cp physiq.def physiq.def.save
219                LMDZ_sed physiq.def read_climoz 0
220                IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
221                if [ ${DRYRUN} -le 1 ] ; then
222                    ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
223                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
224                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
225                fi
226                IGCM_sys_Mv physiq.def.save physiq.def
227            else
228                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
229                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated for DRYRUN = " $DRYRUN >> stack
230            fi
231        fi
232
233    fi
234
235    IGCM_debug_PopStack "ATM_Update"
236}
237
238#-----------------------------------
239function ATM_Finalize
240{
241    IGCM_debug_PushStack "ATM_Finalize"
242
243    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
244
245    echo FINALIZE ATM !
246
247    IGCM_debug_PopStack "ATM_Finalize"
248}
Note: See TracBrowser for help on using the repository browser.