1 | [Compatibility] |
---|
2 | libIGCM=1.0 |
---|
3 | |
---|
4 | [UserChoices] |
---|
5 | # Physics package to use : |
---|
6 | # LMDZ_Physics=AP for standard/old physics(defalut), can be used with LMDZ4_AR5 or LMDZ5/trunk sources |
---|
7 | # LMDZ_Physics=NPv3.2 for an early version of the new physics, to be used with LMDZ5/trunk revision 1554 or later |
---|
8 | # LMDZ_Physics=NPv5.70 for new physics to be used with LMDZ5/testing revision 2595 or later |
---|
9 | # LMDZ_Physics=NPv5.80bz0 for new physics to be used with LMDZ5/trunk revision 2699 or later |
---|
10 | # LMDZ_Physics=NPv6.0.7 for new physics to be used with LMDZ5/trunk revision 2720 or later |
---|
11 | # LMDZ_Physics=NPv6.0.8 for new physics to be used with LMDZ5/trunk revision 2739 or later |
---|
12 | # LMDZ_Physics=NPv6.0.15_T or NPv6.0.15_S to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3224 |
---|
13 | # LMDZ_Physics=NPv6.1 to be used with LMDZ6/branches/IPSLCM6.0.15 rev 3301 |
---|
14 | LMDZ_Physics=NPv6.1.3 |
---|
15 | |
---|
16 | # Set ConfType to choose parameters for aerosols, solar and green house gazes. |
---|
17 | # The parameter file PARAM/config.def_$ConfType will be used. |
---|
18 | # ConfType=preind/actuel/annuel |
---|
19 | ConfType=preind |
---|
20 | |
---|
21 | # Manage radiative aerosol effect and ozone |
---|
22 | flag_aerosol=6 |
---|
23 | ok_ade=y |
---|
24 | ok_aie=y |
---|
25 | aerosol_couple=n |
---|
26 | read_climoz=1 |
---|
27 | ok_cdnc=y |
---|
28 | |
---|
29 | # Set tau_gl depending on the forcing file for the sea-ice (use 2. for amip and 1. for hadisst) |
---|
30 | tau_gl=2. |
---|
31 | |
---|
32 | # ByPass_hgardfou_teta=y : modify teta_ parameters for following CumulPeriod only |
---|
33 | ByPass_hgardfou_teta=n |
---|
34 | |
---|
35 | # ByPass_hgardfou_mats=y : set parameter purmats=y for following CumulPeriod only |
---|
36 | ByPass_hgardfou_mats=n |
---|
37 | |
---|
38 | # Set OutLevel to choose the level of output for LMDZ |
---|
39 | # OutLevel=low/medium/high |
---|
40 | OutLevel=low |
---|
41 | |
---|
42 | # Set COSP activation and output frequency (monthly, daily, HF) = y/n |
---|
43 | LMDZ_COSP_OK=y |
---|
44 | LMDZ_COSP_monthly=n |
---|
45 | LMDZ_COSP_daily=n |
---|
46 | LMDZ_COSP_hf=n |
---|
47 | |
---|
48 | # Set NMC output frequency (monthly, daily, HF) = y/n |
---|
49 | LMDZ_NMC_monthly=n |
---|
50 | LMDZ_NMC_daily=n |
---|
51 | LMDZ_NMC_hf=n |
---|
52 | |
---|
53 | # Nugding : ok_guide=y/n |
---|
54 | # If ok_guide=y, add nudging files(u.nc, v.nc, hur.nc,...) in BoundaryFiles section below. |
---|
55 | ok_guide=n |
---|
56 | |
---|
57 | [InitialStateFiles] |
---|
58 | List= (${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/start_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, start.nc),\ |
---|
59 | (${R_IN}/ATM/START/eORCA1.2xLMD${RESOL_ATM_XY}/startphy_eORCA1.2xLMD${RESOL_ATM_3D}_o2a_v3.nc, startphy.nc) |
---|
60 | |
---|
61 | [BoundaryFiles] |
---|
62 | List= (${R_IN}/CMIP6/${config_UserChoices_LongName}/${config_UserChoices_ModelName}/${config_UserChoices_ExperimentName}/${config_UserChoices_Member}/${year}/dr2xml_LMDZ.xml, dr2xml_lmdz.xml),\ |
---|
63 | (${R_IN}/ATM/LIMIT/CMIP6/CM61-LR-pi-03/interpol/ELC-144x142x79_clim_limit.nc, limit.nc) |
---|
64 | |
---|
65 | # With CMIP6 aerosols version 1 |
---|
66 | # # With 3D ozone |
---|
67 | # Note: the SOLARANDVOLCANOES.txt is only used for LMDZ_Physics=AP and NPv3.2 (if ok_suntime_rrtm=n); add file : |
---|
68 | # (${R_IN}/ATM/IPCC_AR5/RCPs/SolarConstant/SOLAR_1765_2500.txt, SOLARANDVOLCANOES.txt),\ |
---|
69 | ListNonDel= (${R_IN}/ATM/AEROSOLS/CMIP6/v1/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/aerosols1850_from_inca.nc, aerosols.nat.nc),\ |
---|
70 | (${R_IN}/ATM/OZONE/UReading/historical.v20160711.v2/interpol/${RESOL_ATM_XY}/climoz_LMDZ_1850_1850_clim.nc, climoz_LMDZ.nc),\ |
---|
71 | (${R_IN}/ATM/SITES/cfsites_grid_CMIP6.nc, cfsites_grid.nc) |
---|
72 | |
---|
73 | # Copy one set of input files for the first 165 years, historical period, and another set to continue with scenario 4.5. |
---|
74 | # ssp=ssp245 must be added in config.card, UserChoices section |
---|
75 | # |
---|
76 | # For leap years, copy ELC-144x142x79-leap_clim_limit.nc over ELC-144x142x79_clim_limit.nc file |
---|
77 | # NB : There is a leap year every year whose number is perfectly divisible by four - except for years which are both divisible by 100 and not divisible by 400. |
---|
78 | # The second part of the rule effects century years : 1600 and 2000 are leap years, but the years 1700, 1800, and 1900, 2100 are not. |
---|
79 | # So, the "noleap" limit file must be copied again over the "leap" one for years 1900, 2100. |
---|
80 | # As all smooth files are also copied at each job (re)submission, the "noleap" file must be re-copied over the "leap" one if the |
---|
81 | # (re)submitted job starts with noleap years - which is the case for exemple for the beginning of the historical period (1850,1851). |
---|
82 | # To run smoothly, the first job submission must have PeriodNb=2+multiple of 4 (ex: 18), and the following must have PeriodNb=multiple of 4 (ex: 16) |
---|
83 | # |
---|
84 | [SmoothFiles] |
---|
85 | List= (${R_IN}/ATM/LIMIT/CMIP6/CM61-LR-pi-03/interpol/ELC-144x142x79-leap_clim_limit.nc, limit.nc, 3:4:),\ |
---|
86 | (${R_IN}/ATM/LIMIT/CMIP6/CM61-LR-pi-03/interpol/ELC-144x142x79_clim_limit.nc, limit.nc, 1:1:2),\ |
---|
87 | (${R_IN}/ATM/LIMIT/CMIP6/CM61-LR-pi-03/interpol/ELC-144x142x79_clim_limit.nc, limit.nc, 234:1:234),\ |
---|
88 | (${R_IN}/ATM/LIMIT/CMIP6/CM61-LR-pi-03/interpol/ELC-144x142x79_clim_limit.nc, limit.nc, 51:1:51),\ |
---|
89 | (${R_IN}/ATM/LIMIT/CMIP6/CM61-LR-pi-03/interpol/ELC-144x142x79_clim_limit.nc, limit.nc, 251:1:251),\ |
---|
90 | (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Historical/solarforcing_v3.1_daily_6bands_${year}.nc, solarforcing.nc, 1:1:165),\ |
---|
91 | (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc, 1:1:165),\ |
---|
92 | (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc, 1:1:165),\ |
---|
93 | (${R_IN}/ATM/SOLAR/CMIP6/v3.1corr/Future/solarforcing_v3.1_daily_6bands_${year}.nc, solarforcing.nc, 166:1:),\ |
---|
94 | (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.${year}.nc, taulwstrat.2D.nc, 166:1:174),\ |
---|
95 | (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/taulwstrat.2D.ave.nc, taulwstrat.2D.nc, 175:1:),\ |
---|
96 | (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.${year}.nc, tauswstrat.2D.nc, 166:1:174),\ |
---|
97 | (${R_IN}/ATM/STRATAERO/CMIP6/v3/${RESOL_ATM_XY}/L${RESOL_ATM_Z}/tauswstrat.2D.ave.nc, tauswstrat.2D.nc, 175:1:) |
---|
98 | |
---|
99 | |
---|
100 | [ParametersFiles] |
---|
101 | List= (${SUBMIT_DIR}/PARAM/physiq.def_${LMDZ_Physics}, physiq.def), \ |
---|
102 | (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_XY}_${LMDZ_Physics}, gcm.def),\ |
---|
103 | (${SUBMIT_DIR}/PARAM/vert.def_L${RESOL_ATM_Z}, vert.def), \ |
---|
104 | (${MODIPSL}/modeles/LMDZ/DefLists/cosp_input_nl.txt, .), \ |
---|
105 | (${MODIPSL}/modeles/LMDZ/DefLists/cosp_output_nl.txt, .), \ |
---|
106 | (${SUBMIT_DIR}/PARAM/config.def_${ConfType}, config.def), \ |
---|
107 | (${SUBMIT_DIR}/PARAM/guide.def, .), \ |
---|
108 | (${SUBMIT_DIR}/PARAM/run.def, .), \ |
---|
109 | (${SUBMIT_DIR}/PARAM/traceur.def, .), \ |
---|
110 | (${SUBMIT_DIR}/PARAM/iodef.xml, . ), \ |
---|
111 | (${SUBMIT_DIR}/PARAM/ping_LMDZ.xml, ping_lmdz.xml ), \ |
---|
112 | (${SUBMIT_DIR}/PARAM/context_lmdz.xml_2RadCall, context_lmdz.xml ), \ |
---|
113 | (${SUBMIT_DIR}/PARAM/field_def_lmdz.xml_2RadCall, field_def_lmdz.xml ), \ |
---|
114 | (${SUBMIT_DIR}/PARAM/file_def_histmth_lmdz.xml_2RadCall, file_def_histmth_lmdz.xml ), \ |
---|
115 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthCOSP_lmdz.xml, .),\ |
---|
116 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histmthNMC_lmdz.xml, . ),\ |
---|
117 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histday_lmdz.xml, . ), \ |
---|
118 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayCOSP_lmdz.xml, .),\ |
---|
119 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histdayNMC_lmdz.xml, . ),\ |
---|
120 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhf_lmdz.xml, . ), \ |
---|
121 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfCOSP_lmdz.xml, .), \ |
---|
122 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histhfNMC_lmdz.xml, . ), \ |
---|
123 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstn_lmdz.xml, . ), \ |
---|
124 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histins_lmdz.xml, . ), \ |
---|
125 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histstrataer_lmdz.xml, . ),\ |
---|
126 | (${MODIPSL}/modeles/LMDZ/DefLists/file_def_histLES_lmdz.xml, . ) |
---|
127 | |
---|
128 | [RestartFiles] |
---|
129 | List= (restart.nc, restart.nc, start.nc), \ |
---|
130 | (restartphy.nc, restartphy.nc, startphy.nc) |
---|
131 | |
---|
132 | [OutputText] |
---|
133 | List= (physiq.def, gcm.def, run.def, traceur.def, guide.def, config.def, vert.def, used_run.def, iodef.xml, context_lmdz.xml, field_def_lmdz.xml, file_def_*lmdz.xml, debug.01, lmdz.prt, out_lmdz.x.err, out_lmdz.x.out, ping_lmdz.xml, dr2xml_lmdz.xml) |
---|
134 | |
---|
135 | [OutputFiles] |
---|
136 | List= (histmth.nc, ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc, Post_1M_histmth), \ |
---|
137 | (histmthCOSP.nc, ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthCOSP.nc, NONE), \ |
---|
138 | (histmthNMC.nc, ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmthNMC.nc, NONE), \ |
---|
139 | (histday.nc, ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc, NONE), \ |
---|
140 | (histdayCOSP.nc, ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayCOSP.nc, NONE), \ |
---|
141 | (histdayNMC.nc, ${R_OUT_ATM_O_D}/${PREFIX}_1D_histdayNMC.nc, NONE), \ |
---|
142 | (histhf.nc, ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc, NONE), \ |
---|
143 | (histhfCOSP.nc, ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfCOSP.nc, NONE), \ |
---|
144 | (histhfNMC.nc, ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhfNMC.nc, NONE), \ |
---|
145 | (histhf3h.nc, ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3h.nc, NONE), \ |
---|
146 | (histhf3hm.nc, ${R_OUT_ATM_O_H}/${PREFIX}_3H_histhf3hm.nc, NONE) |
---|
147 | |
---|
148 | [Post_1M_histmth] |
---|
149 | Patches= () |
---|
150 | GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds, aire) |
---|
151 | TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, ftime_con, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFC, LWupSFCclr, precip, prw, pluc, psol, q2m, rh2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWdnTOA, SWupTOA, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, ave_t2m_daily_max, ave_t2m_daily_min, taux, taux_ter, taux_sic, taux_lic, taux_oce, tauy, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, nettop, pbase, ptop, topl0, topl, tops0, tops, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, v10m, pourc_ter, pourc_oce, pourc_sic, pourc_lic, wind10m, od550aer, od550lt1aer, od550_STRAT, sconcoa, sconcbc, sconcso4, R_ecc, R_peri, R_incl, solaire, rsun1, co2_ppm, CH4_ppb, N2O_ppb, CFC11_ppt, CFC12_ppt, colO3_strat, colO3_trop, irfstar,irfstcsar,irflutar,irflutcsar,irfssar,irfsscsar,irflsar,irflscsar) |
---|
152 | #, topswad,toplwad,topswai,toplwai,topswad0,toplwad0,solswad,sollwad,solswai,sollwai,solswad0,sollwad0, irfstar,irfstcsar,irfstac,irflutar,irflutcsar,irflutac,irfssar,irfsscsar,irfssac,irflsar,irflscsar,irflsac, rlutghg,rlutcsghg,rsutghg,rsutcsghg, rsusghg,rsuscsghg,rsdsghg,rsdscsghg,rlusghg,rluscsghg,rldsghg,rldscsghg, rlut4co2,rlutcs4co2,rsut4co2,rsutcs4co2, rsus4co2,rsuscs4co2,rsds4co2,rsdscs4co2,rlus4co2,rluscs4co2,rlds4co2,rldscs4co2, p_tropopause,t_tropopause,z_tropopause) |
---|
153 | ChunckJob2D = NONE |
---|
154 | TimeSeriesVars3D = (temp, theta, ovap, geop, vitu, vitv, vitw, pres, rneb, rhum, paprs, ec550aer, concoa, concbc, concso4, concss, concdust) |
---|
155 | #, rsu,rsucs,rsd,rsdcs,rlu,rlucs,rld,rldcs, rsughg,rsucsghg,rsdghg,rsdcsghg,rlughg,rlucsghg,rldghg,rldcsghg, rsu4co2,rsucs4co2,rsd4co2,rsdcs4co2,rlu4co2,rlucs4co2,rld4co2,rldcs4co2) |
---|
156 | ChunckJob3D = 100Y |
---|
157 | Seasonal=ON |
---|
158 | |
---|
159 | [Post_1M_histmthCOSP] |
---|
160 | Patches = () |
---|
161 | GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds, aire) |
---|
162 | TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp) |
---|
163 | ChunckJob2D = OFF |
---|
164 | TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl) |
---|
165 | ChunckJob3D = OFF |
---|
166 | Seasonal=OFF |
---|
167 | |
---|
168 | [Post_1M_histmthNMC] |
---|
169 | Patches = () |
---|
170 | GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds) |
---|
171 | TimeSeriesVars2D = () |
---|
172 | ChunckJob2D = NONE |
---|
173 | TimeSeriesVars3D = (ta, tro3, zg, hus, hur, ua, va, wap) |
---|
174 | ChunckJob3D = NONE |
---|
175 | Seasonal=ON |
---|
176 | |
---|
177 | [Post_1D_histday] |
---|
178 | Patches= () |
---|
179 | GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds) |
---|
180 | TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, precip, pluc, plul, prw, psol, q2m, sens, sicf, slp, soll, sols, snow, SWdnSFC, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max) |
---|
181 | ChunckJob2D = 50Y |
---|
182 | TimeSeriesVars3D = (lwcon, iwcon, mc, rhum, rneb, temp, theta, ovap, geop, vitu, vitv, vitw, pres, paprs) |
---|
183 | ChunckJob3D = OFF |
---|
184 | Seasonal=OFF |
---|
185 | |
---|
186 | [Post_1D_histdayCOSP] |
---|
187 | Patches = () |
---|
188 | GatherWithInternal = (lon, lat, pressure2, height, sza, time_counter, time_centered, time_centered_bounds) |
---|
189 | TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso, tclisccp, albisccp, ctpisccp) |
---|
190 | ChunckJob2D = OFF |
---|
191 | TimeSeriesVars3D = (clcalipso, clisccp2_c01, clisccp2_c02, clisccp2_c03, clisccp2_c04, clisccp2_c05, clisccp2_c06, clisccp2_c07, parasol_refl) |
---|
192 | ChunckJob3D = OFF |
---|
193 | Seasonal=OFF |
---|
194 | |
---|
195 | [Post_1D_histdayNMC] |
---|
196 | Patches = () |
---|
197 | GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds) |
---|
198 | TimeSeriesVars2D = () |
---|
199 | ChunckJob2D = NONE |
---|
200 | TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap) |
---|
201 | ChunckJob3D = 10Y |
---|
202 | Seasonal=OFF |
---|
203 | |
---|
204 | [Post_HF_histhf] |
---|
205 | Patches= () |
---|
206 | GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds) |
---|
207 | TimeSeriesVars2D = (cldt, psol, q2m, slp, precip, pluc, plul, t2m, tsol, u10m, v10m) |
---|
208 | ChunckJob2D = 50Y |
---|
209 | TimeSeriesVars3D = (temp, theta, ovap, vitu, vitv) |
---|
210 | ChunckJob3D = OFF |
---|
211 | Seasonal=OFF |
---|
212 | |
---|
213 | [Post_HF_histhfCOSP] |
---|
214 | Patches = () |
---|
215 | GatherWithInternal = (lon, lat, height, sza, time_counter, time_centered, time_centered_bounds) |
---|
216 | TimeSeriesVars2D = (cllcalipso, clmcalipso, clhcalipso, cltcalipso) |
---|
217 | ChunckJob2D = OFF |
---|
218 | TimeSeriesVars3D = (clcalipso, parasol_refl, cfad_lidarsr532_c01, cfad_lidarsr532_c02, cfad_lidarsr532_c03, cfad_lidarsr532_c04, cfad_lidarsr532_c05, cfad_lidarsr532_c06, cfad_lidarsr532_c07, cfad_lidarsr532_c08, cfad_lidarsr532_c09, cfad_lidarsr532_c10, cfad_lidarsr532_c11, cfad_lidarsr532_c12, cfad_lidarsr532_c13, cfad_lidarsr532_c14, cfad_lidarsr532_c15) |
---|
219 | ChunckJob3D = OFF |
---|
220 | Seasonal=OFF |
---|
221 | |
---|
222 | [Post_HF_histhfNMC] |
---|
223 | Patches = () |
---|
224 | GatherWithInternal = (lon, lat, plev, time_counter, time_centered, time_centered_bounds) |
---|
225 | TimeSeriesVars2D = () |
---|
226 | ChunckJob2D = NONE |
---|
227 | TimeSeriesVars3D = (ta, zg, hus, hur, ua, va, wap) |
---|
228 | ChunckJob3D = 10Y |
---|
229 | Seasonal=OFF |
---|
230 | |
---|
231 | [Post_3H_histhf3hm] |
---|
232 | Patches= () |
---|
233 | GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds) |
---|
234 | TimeSeriesVars2D = (flat, precip, pluc, snow, topl, topl0, SWupTOA, SWupTOAclr, SWdnTOA, SWupSFC, SWupSFCclr, SWdnSFC, SWdnSFCclr, LWupSFC, LWupSFCclr, LWdnSFC, LWdnSFCclr, bils, bils_tke, bils_diss, bils_ec, bils_kinetic, bils_enthalp, bils_latent, sens, cldt, zmax_th) |
---|
235 | ChunckJob2D = OFF |
---|
236 | TimeSeriesVars3D = () |
---|
237 | ChunckJob3D = OFF |
---|
238 | Seasonal=OFF |
---|
239 | |
---|
240 | [Post_3H_histhf3h] |
---|
241 | Patches= () |
---|
242 | GatherWithInternal = (lon, lat, presnivs, time_counter, time_centered, time_centered_bounds) |
---|
243 | TimeSeriesVars2D = (phis, tsol, t2m, q2m, ustar, u10m, v10m, psol) |
---|
244 | ChunckJob2D = OFF |
---|
245 | TimeSeriesVars3D = () |
---|
246 | ChunckJob3D = OFF |
---|
247 | Seasonal=OFF |
---|