source: CONFIG/IPSLCM/IPSLCM5-2/Chistorical/COMP/lmdz.driver @ 1537

Last change on this file since 1537 was 1537, checked in by jgipsl, 13 years ago

Modifications in working configuration :

  • Added optional variable CARBON_CYCLE=control/historical/NONE, to be set in lmdz.card UserSection?. Default value NONE.
  • The special treatement for carbon cycle in lmdz.driver is now done only if this variable is set to control or historical. Added carbon

cycle treatement in all drivers.

  • Added the variable CARBON_CYCLE=control/historical only in Chistorical and CpiControl? lmdz.card.

NB!

  • The specific treatement when "${FirstInitialize?} and ${config_ATM_Restart}=y" was only done in Chistorical before. Now this

is done for both cases of CARBON_CYCLE=historical and control.
File size: 15.9 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function LMDZ_sed
4{
5    IGCM_debug_PushStack "LMDZ_sed"
6
7    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
8    RET=$?
9    echo "LMDZ_sed : ${1} ${2} ${3}"
10    \mv ${1}.tmp ${1}
11
12    IGCM_debug_PopStack "LMDZ_sed"
13    return $RET
14}
15
16function ATM_Initialize
17{
18    IGCM_debug_PushStack "ATM_Initialize"
19
20    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
21
22    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
23
24    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
25
26    ##-- Calendar type for LMDZ
27    case ${config_UserChoices_CalendarType} in
28        leap|gregorian)
29            CalendarTypeForLmdz=earth_366d;;
30        noleap)
31            CalendarTypeForLmdz=earth_365d;;
32        360d)
33            CalendarTypeForLmdz=earth_360d;;
34        *)
35            CalendarTypeForLmdz=earth_360d
36    esac
37
38    ##--Frequency purpose ....
39    ##--  Initialisation  ....
40    OK_instan=n
41    OK_journe=n
42    OK_mensuel=n
43    ok_hf=n
44
45    case ${config_UserChoices_PeriodLength} in
46        1Y|1y|1M|1m) OK_mensuel=y ;;
47        5D|5d|1D|1d) OK_journe=y ;;
48    esac
49
50    for frequency in ${config_ATM_WriteFrequency} ; do
51        case ${frequency} in
52            5D|5d|1D|1d) OK_journe=y ;;
53        esac
54        case ${frequency} in
55            HF|hf) 
56                ok_hf=y
57                OK_instan=y
58                ;;
59        esac
60    done
61
62    ## Read LMDZ_NbPeriod_adjust option in lmdz.card
63    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_NbPeriod_adjust
64    LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}
65
66    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
67        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_Bands_file_name
68        LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
69    fi
70
71    ##  Read LMDZ_Freq_aero and LMDZ_Length_aero in lmdz.card
72    LMDZ_Freq_aero=${lmdz_UserChoices_LMDZ_Freq_aero}
73    LMDZ_Length_aero=${lmdz_UserChoices_LMDZ_Length_aero}
74
75    ##  Read LMDZ_COSP_monthly  LMDZ_COSP_daily and LMDZ_COSP_hf in lmdz.card
76    LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
77    LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
78    LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
79    LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}
80
81    ##  Read LMDZ_NMC_monthly  LMDZ_NMC_daily and LMDZ_NMC_hf in lmdz.card
82    LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
83    LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
84    LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}
85
86    IGCM_debug_PopStack "ATM_Initialize"
87}
88
89#-----------------------------------------------------------------
90function ATM_Update
91{
92    IGCM_debug_PushStack "ATM_Update"
93
94
95    case ${config_UserChoices_PeriodLength} in
96        *Y|*y) 
97               LMDZ_ecrit_mth=30.
98               LMDZ_ecrit_ISCCP=30.
99               LMDZ_periodav=30.
100               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
101                  echo Change calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d
102                  exit
103               fi
104               ;;
105        *)
106               LMDZ_ecrit_mth=${PeriodLengthInDays}.
107               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
108               LMDZ_periodav=${PeriodLengthInDays}.
109               ;;
110    esac
111
112    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
113    if [ ${CumulPeriod} -eq 1 ] ; then
114        RAZ_DATE=1
115    else
116        RAZ_DATE=0
117    fi
118
119    ## algo : For CumulPeriod=1 ;
120    ##        IF NbPeriod_Adjust = 0, Get Bands file directly from server, store it with _0 suffix
121    ##        ELSE LMDZ_adjust=y ; save Bands file on file server ;
122    ##        For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; Get Bands file from server (CumulPeriod-1) ; LMDZ_adjust=y ; save Bands file on file server ;
123    ##        For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from server (CumulPeriod=LMDZ_NbPeriod_adjust 0 to force it) ; Use Bands ;
124
125    if [ ${CumulPeriod} -eq 1 ] ; then
126        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
127            IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
128            IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
129            IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
130        fi
131    fi
132
133    LMDZ_adjust=n
134    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
135
136    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
137    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
138
139    [ ${CumulPeriod} -gt 1 ] && ( IGCM_sys_Get ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat )
140
141    ##-- GHG forcing :
142    ##   If forcing file exist in run directory, read values for the current year and modify physiq.def
143    if [ -f SOLARANDVOLCANOES.txt ] ; then
144        IPCC_SOLAR=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
145        LMDZ_sed physiq.def solaire     ${IPCC_SOLAR}
146    fi
147    if [ -f CO2.txt ] ; then
148        IPCC_CO2=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
149        LMDZ_sed physiq.def co2_ppm     ${IPCC_CO2}
150    fi
151    if [ -f CH4.txt ] ; then
152        IPCC_CH4=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
153        LMDZ_sed physiq.def CH4_ppb     ${IPCC_CH4}
154    fi
155    if [ -f N2O.txt ] ; then
156        IPCC_N2O=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
157        LMDZ_sed physiq.def N2O_ppb     ${IPCC_N2O}
158    fi
159    if [ -f CFC11.txt ] ; then
160        IPCC_CFC11=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
161        LMDZ_sed physiq.def CFC11_ppt   ${IPCC_CFC11}
162    fi
163    if [ -f CFC12.txt ] ; then
164        IPCC_CFC12=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
165        LMDZ_sed physiq.def CFC12_ppt   ${IPCC_CFC12}
166    fi
167
168
169    # Add special treatement for CARBON CYCLE
170    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] || [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
171
172        typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
173        typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
174        typeset PathCO2log
175        typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
176
177        if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ]) ; then
178        ##--Initialization of fluxes to an undefined value at the first run
179            UndefinedValueCo2=-9999
180            InitPeriodCo2=0
181            InitDateBeginCo2=${UndefinedValueCo2}
182            InitYearCo2=$(( ${year} - 1 )) 
183            InitDateEndCo2=${InitYearCo2}1231
184            fCO2_ff=${UndefinedValueCo2} 
185            CO2SBG=${UndefinedValueCo2}
186            CO2LU=${UndefinedValueCo2}
187            CO2MBG=${UndefinedValueCo2}
188            CO2_ppm_prec=${UndefinedValueCo2}
189        # Get the initial value of atmosp. pco2
190            CO2_ppm=${lmdz_UserChoices_co2_init}
191           
192            IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
193            IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
194           
195        # Save CO2 values in ExeCpuLog variable contents 5 fields
196            echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
197                gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
198                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
199           
200        # Get the path where the log file co2.log is
201            PathCO2log=${SUBMIT_DIR} 
202        # Get Previous line in co2.log
203            PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
204           
205        else
206           
207        # NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
208        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
209        #SubmitRestartPath=
210            if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ]) ; then
211                IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
212                PathCO2log=${config_ATM_SubmitRestartPath}
213                Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
214                PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
215               
216                IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
217                IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
218               
219            # Save Last Line of control in new co2.log file
220                InitPeriodCo2=0   
221                InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
222                InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
223                fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
224                CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
225                CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
226                CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
227                CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
228                CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
229               
230                echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
231                    gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
232                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
233            else
234           # Get restart line in co2.log
235                PathCO2log=${SUBMIT_DIR}
236                PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
237           # Get the value of atmosp. pco2 in co2.log
238                CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
239            fi
240           
241        fi
242
243        if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
244            # Modify co2_ppm in physiq.def only for historical run
245            LMDZ_sed physiq.def co2_ppm     ${CO2_ppm}
246        fi
247    fi
248    # end CARBON_CYCLE
249
250    ##-- For historical daily cosp must be output during 1979-2005 period
251    [ ${year} -ge 1979 ] && LMDZ_COSP_daily=y
252
253    ## physiq.def parameters modified from initial physiq_L${RESOL_ATM_Z}
254    LMDZ_sed physiq.def OK_instan   ${OK_instan}
255    LMDZ_sed physiq.def OK_journe   ${OK_journe}
256    LMDZ_sed physiq.def OK_mensuel  ${OK_mensuel}
257    LMDZ_sed physiq.def ok_hf       ${ok_hf}
258    LMDZ_sed physiq.def ecrit_mth   ${LMDZ_ecrit_mth}
259    LMDZ_sed physiq.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
260    LMDZ_sed physiq.def ok_cosp     ${LMDZ_COSP_OK}
261    LMDZ_sed physiq.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
262    LMDZ_sed physiq.def ok_journeCOSP   ${LMDZ_COSP_daily}
263    LMDZ_sed physiq.def ok_hfCOSP   ${LMDZ_COSP_hf}
264    LMDZ_sed physiq.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}"
265
266    ## gcm.def parameters : no change since gcm.def_${RESOL_ATM_3D} is used and already modified
267
268    ## run.def parameters
269    LMDZ_sed run.def dayref   ${InitDay}
270    LMDZ_sed run.def anneeref ${InitYear}
271    LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
272    LMDZ_sed run.def nday     ${PeriodLengthInDays}
273    LMDZ_sed run.def raz_date ${RAZ_DATE}
274    LMDZ_sed run.def periodav ${LMDZ_periodav}
275    LMDZ_sed run.def adjust   ${LMDZ_adjust}
276
277    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
278    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
279    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
280    if [ ${ByPass_hgardfou_teta} = y ] ; then
281        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
282        IGCM_sys_Mv gcm.def.tmp gcm.def
283        echo
284        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
285        echo
286        cat gcm.def
287        ByPass_hgardfou_teta=n
288        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
289    fi
290
291    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
292    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats
293    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
294    if [ ${ByPass_hgardfou_mats} = y ] ; then
295        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
296        IGCM_sys_Mv gcm.def.tmp gcm.def
297        echo
298        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
299        echo
300        cat gcm.def
301        ByPass_hgardfou_mats=n
302        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
303    fi
304
305    if ( ${FirstInitialize} ) ; then
306
307        if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
308            if [ ${DRYRUN} -le 2 ] ; then
309                ##-- suppression of ozone file construction --
310                cp physiq.def physiq.def.save
311                LMDZ_sed physiq.def read_climoz 0
312                IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
313                if [ ${DRYRUN} -le 1 ] ; then
314                    ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
315                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
316                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
317                fi
318                IGCM_sys_Mv physiq.def.save physiq.def
319            else
320                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
321                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated for DRYRUN = " $DRYRUN >> stack
322            fi
323        fi
324
325    fi
326
327    IGCM_debug_PopStack "ATM_Update"
328}
329
330#-----------------------------------
331function ATM_Finalize
332{
333    IGCM_debug_PushStack "ATM_Finalize"
334
335    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
336
337
338    # Add special treatement for CARBON CYCLE
339    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] || [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
340        typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
341
342        # Fossil fuel emission
343        if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
344            # For Control, no fossil fuel emission :
345            fCO2_ff=0
346            echo "Fossil Fuel for control run  :" ${fCO2_ff}
347        else
348            # For historical, get the fossile fuel file :
349            fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
350            echo "Fossil Fuel for historical run  :" ${fCO2_ff}
351        fi
352
353        # Get the value of ocean carbon flux
354        CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
355        CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
356        echo "Ocean carbon flux  :" ${CO2MBG}
357
358        # Get the value of land fluxes
359        set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
360        CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
361        CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
362        CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
363        echo "Land carbon flux (NEP)         :" ${CO2SRF}
364        echo "LU flux          (FLUC)        :" ${CO2LU}
365        echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
366
367        # Previous CO2
368        CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
369        echo "Previous CO2  :" ${CO2_ppm_prec}
370
371        # Formula
372        CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
373        echo "New CO2  :" ${CO2_ppm}
374
375        # Save CO2 values in ExeCpuLog variable contents 5 fields
376        echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
377            gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
378                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
379
380    fi
381
382    echo FINALIZE ATM !
383
384    IGCM_debug_PopStack "ATM_Finalize"
385}
Note: See TracBrowser for help on using the repository browser.