source: CONFIG/IPSLCM/IPSLCM5-2/historical/COMP/lmdz.driver @ 1545

Last change on this file since 1545 was 1545, checked in by jgipsl, 13 years ago

Modifications in working configuration :

Added possibility to run LMDZ new physics also in historical,
Chistorical, piControl and CpiControl?. See also rev 1544.
File size: 16.7 KB
Line 
1#!/bin/ksh
2#-----------------------------------------------------------------
3function LMDZ_sed
4{
5    IGCM_debug_PushStack "LMDZ_sed"
6
7    sed -e "s/^${2}\ *=.*/${2}= ${3}/" ${1} > ${1}.tmp
8    RET=$?
9    echo "LMDZ_sed : ${1} ${2} ${3}"
10    \mv ${1}.tmp ${1}
11
12    IGCM_debug_PopStack "LMDZ_sed"
13    return $RET
14}
15
16function ATM_Initialize
17{
18    IGCM_debug_PushStack "ATM_Initialize"
19
20    RESOL_ATM=$( echo $RESOL | awk "-Fx" '{print $2}' | awk "-F-" '{print $1}')
21
22    [ -f ${SUBMIT_DIR}/../.resol ] && eval $(grep RESOL_ATM_3D ${SUBMIT_DIR}/../.resol) || RESOL_ATM_3D=96x95x19
23
24    RESOL_ATM_Z=$( echo ${RESOL_ATM_3D} | awk "-Fx" '{print $3}' )
25
26    ##-- Calendar type for LMDZ
27    case ${config_UserChoices_CalendarType} in
28        leap|gregorian)
29            CalendarTypeForLmdz=earth_366d;;
30        noleap)
31            CalendarTypeForLmdz=earth_365d;;
32        360d)
33            CalendarTypeForLmdz=earth_360d;;
34        *)
35            CalendarTypeForLmdz=earth_360d
36    esac
37
38       
39    ##- LMDZ physics version
40    ##  Read LMDZ_Physics option in lmdz.card, if not present take default value AP (old physics)
41    if [ ! X${lmdz_UserChoices_LMDZ_Physics} = X ] ; then
42        LMDZ_Physics=${lmdz_UserChoices_LMDZ_Physics}
43    else
44        LMDZ_Physics=AP
45    fi
46    echo LMDZ physics version : ${LMDZ_Physics}
47
48
49    ##-- Output frequency purpose ....
50    ##--  Initialisation  ....
51    ok_mensuel=n
52    ok_journe=n
53    ok_hf=n
54    ok_hf3h=n
55    ok_hf3hm=n
56    ok_stn=n
57
58    case ${config_UserChoices_PeriodLength} in
59        1Y|1y|1M|1m) ok_mensuel=y ;;
60        5D|5d|1D|1d) ok_journe=y ;;
61    esac
62
63    for frequency in ${config_ATM_WriteFrequency} ; do
64        case ${frequency} in
65            1M|1m) ok_mensuel=y ;;
66        esac
67        case ${frequency} in
68            5D|5d|1D|1d) ok_journe=y ;;
69        esac
70        case ${frequency} in
71            HF|hf) ok_hf=y ;;
72        esac
73        case ${frequency} in
74            HF3h|hf3h) ok_hf3h=y ;;
75        esac
76        case ${frequency} in
77            HF3hm|hf3hm) ok_hf3hm=y ;;
78        esac
79        case ${frequency} in
80            STN|stn) ok_stn=y ;;
81        esac
82    done
83
84    ## Read LMDZ_NbPeriod_adjust option in lmdz.card
85    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_NbPeriod_adjust
86    LMDZ_NbPeriod_adjust=${lmdz_UserChoices_LMDZ_NbPeriod_adjust}
87
88    if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
89        IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices LMDZ_Bands_file_name
90        LMDZ_Bands_file_name=${lmdz_UserChoices_LMDZ_Bands_file_name}
91    fi
92
93    ##  Read LMDZ_Freq_aero and LMDZ_Length_aero in lmdz.card
94    LMDZ_Freq_aero=${lmdz_UserChoices_LMDZ_Freq_aero}
95    LMDZ_Length_aero=${lmdz_UserChoices_LMDZ_Length_aero}
96
97    ##  Read LMDZ_COSP_monthly  LMDZ_COSP_daily and LMDZ_COSP_hf in lmdz.card
98    LMDZ_COSP_OK=${lmdz_UserChoices_LMDZ_COSP_OK}
99    LMDZ_COSP_monthly=${lmdz_UserChoices_LMDZ_COSP_monthly}
100    LMDZ_COSP_daily=${lmdz_UserChoices_LMDZ_COSP_daily}
101    LMDZ_COSP_hf=${lmdz_UserChoices_LMDZ_COSP_hf}
102
103    ##  Read LMDZ_NMC_monthly  LMDZ_NMC_daily and LMDZ_NMC_hf in lmdz.card
104    LMDZ_NMC_monthly=${lmdz_UserChoices_LMDZ_NMC_monthly}
105    LMDZ_NMC_daily=${lmdz_UserChoices_LMDZ_NMC_daily}
106    LMDZ_NMC_hf=${lmdz_UserChoices_LMDZ_NMC_hf}
107
108    IGCM_debug_PopStack "ATM_Initialize"
109}
110
111#-----------------------------------------------------------------
112function ATM_Update
113{
114    IGCM_debug_PushStack "ATM_Update"
115
116
117    case ${config_UserChoices_PeriodLength} in
118        *Y|*y) 
119               LMDZ_ecrit_ISCCP=30.
120               LMDZ_periodav=30.
121               if [ "${config_UserChoices_CalendarType}" != "360d" ] ; then
122                  echo Change calendartype in config.card. PeriodLength=1Y allowed only for CalendarType=360d
123                  exit
124               fi
125               ;;
126        *)
127               LMDZ_ecrit_ISCCP=${PeriodLengthInDays}.
128               LMDZ_periodav=${PeriodLengthInDays}.
129               ;;
130    esac
131
132    ##-- Remise ou non a zero de la date initiale de LMDZ pour le fichier run.def
133    if [ ${CumulPeriod} -eq 1 ] ; then
134        RAZ_DATE=1
135    else
136        RAZ_DATE=0
137    fi
138
139    ## algo : For CumulPeriod=1 ;
140    ##        IF NbPeriod_Adjust = 0, Get Bands file directly from server, store it with _0 suffix
141    ##        ELSE LMDZ_adjust=y ; save Bands file on file server ;
142    ##        For CumulPeriod=2 to LMDZ_NbPeriod_adjust ; Get Bands file from server (CumulPeriod-1) ; LMDZ_adjust=y ; save Bands file on file server ;
143    ##        For CumulPeriod > LMDZ_NbPeriod_adjust ; LMDZ_adjust=n ; Get Bands file from server (CumulPeriod=LMDZ_NbPeriod_adjust 0 to force it) ; Use Bands ;
144
145    if [ ${CumulPeriod} -eq 1 ] ; then
146        if [ ${LMDZ_NbPeriod_adjust} -eq 0 ] ; then
147            IGCM_sys_Get ${LMDZ_Bands_file_name} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat
148            IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0
149            IGCM_debug_Print 1 "Bands file forced to ${LMDZ_Bands_file_name} and stored in ${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_0"
150        fi
151    fi
152
153    LMDZ_adjust=n
154    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && LMDZ_adjust=y
155
156    RefPeriod=${LMDZ_NbPeriod_adjust} #0 to use a Bands file from Restart
157    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && (( RefPeriod = ${CumulPeriod} - 1 )) 
158
159    [ ${CumulPeriod} -gt 1 ] && ( IGCM_sys_Get ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${RefPeriod} Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ; IGCM_sys_Chmod u+w Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat )
160
161    ##-- GHG forcing :
162    ##   If forcing file exist in run directory, read values for the current year and modify physiq.def
163    if [ -f SOLARANDVOLCANOES.txt ] ; then
164        IPCC_SOLAR=`grep Annee_${year} SOLARANDVOLCANOES.txt | awk -F= '{print $2}'`
165        LMDZ_sed physiq.def solaire     ${IPCC_SOLAR}
166    fi
167    if [ -f CO2.txt ] ; then
168        IPCC_CO2=`grep Annee_${year} CO2.txt | awk -F= '{print $2}'`
169        LMDZ_sed physiq.def co2_ppm     ${IPCC_CO2}
170    fi
171    if [ -f CH4.txt ] ; then
172        IPCC_CH4=`grep Annee_${year} CH4.txt | awk -F= '{print $2}'`
173        LMDZ_sed physiq.def CH4_ppb     ${IPCC_CH4}
174    fi
175    if [ -f N2O.txt ] ; then
176        IPCC_N2O=`grep Annee_${year} N2O.txt | awk -F= '{print $2}'`
177        LMDZ_sed physiq.def N2O_ppb     ${IPCC_N2O}
178    fi
179    if [ -f CFC11.txt ] ; then
180        IPCC_CFC11=`grep Annee_${year} CFC11.txt | awk -F= '{print $2}'`
181        LMDZ_sed physiq.def CFC11_ppt   ${IPCC_CFC11}
182    fi
183    if [ -f CFC12.txt ] ; then
184        IPCC_CFC12=`grep Annee_${year} CFC12.txt | awk -F= '{print $2}'`
185        LMDZ_sed physiq.def CFC12_ppt   ${IPCC_CFC12}
186    fi
187
188
189    # Add special treatement for CARBON CYCLE
190    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] || [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
191
192        typeset InitPeriodCo2 InitDateBeginCo2 InitDateEndCo2
193        typeset CO2SBG CO2MBG CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
194        typeset PathCO2log
195        typeset PreviousLinelog LastPeriodDateBegin LastPeriodDateEnd LastDatesPeriod LastPREFIX
196
197        if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"n" ]) ; then
198        ##--Initialization of fluxes to an undefined value at the first run
199            UndefinedValueCo2=-9999
200            InitPeriodCo2=0
201            InitDateBeginCo2=${UndefinedValueCo2}
202            InitYearCo2=$(( ${year} - 1 )) 
203            InitDateEndCo2=${InitYearCo2}1231
204            fCO2_ff=${UndefinedValueCo2} 
205            CO2SBG=${UndefinedValueCo2}
206            CO2LU=${UndefinedValueCo2}
207            CO2MBG=${UndefinedValueCo2}
208            CO2_ppm_prec=${UndefinedValueCo2}
209        # Get the initial value of atmosp. pco2
210            CO2_ppm=${lmdz_UserChoices_co2_init}
211           
212            IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
213            IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
214           
215        # Save CO2 values in ExeCpuLog variable contents 5 fields
216            echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
217                gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
218                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
219           
220        # Get the path where the log file co2.log is
221            PathCO2log=${SUBMIT_DIR} 
222        # Get Previous line in co2.log
223            PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
224           
225        else
226           
227        # NEW parameter in config.card (even for Overule all restarts, you must modify the line after this comment ):
228        # !! NEW for Carbone cycle !! Path where to find old co2.log file for restart CO2.
229        #SubmitRestartPath=
230            if ( ${FirstInitialize} && [ X"${config_ATM_Restart}" = X"y" ]) ; then
231                IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/config.card ATM SubmitRestartPath
232                PathCO2log=${config_ATM_SubmitRestartPath}
233                Date_r=$( IGCM_date_ConvertFormatToGregorian ${config_ATM_RestartDate} )
234                PreviousLinelog=$( grep ${Date_r} ${PathCO2log}/co2.log )
235               
236                IGCM_sys_Cp ${SUBMIT_DIR}/co2.log.init ${SUBMIT_DIR}/co2.log
237                IGCM_sys_Chmod u+w ${SUBMIT_DIR}/co2.log
238               
239            # Save Last Line of control in new co2.log file
240                InitPeriodCo2=0   
241                InitDateBeginCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $2}' )
242                InitDateEndCo2=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $3}' )
243                fCO2_ff=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $6}' )
244                CO2SBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $8}' )
245                CO2LU=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $9}' )
246                CO2MBG=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $7}' )
247                CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $5}' )
248                CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
249               
250                echo "${InitPeriodCo2} ${InitDateBeginCo2} ${InitDateEndCo2} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
251                    gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
252                              $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
253            else
254           # Get restart line in co2.log
255                PathCO2log=${SUBMIT_DIR}
256                PreviousLinelog=$( tail -1 ${PathCO2log}/co2.log )
257           # Get the value of atmosp. pco2 in co2.log
258                CO2_ppm=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
259            fi
260           
261        fi
262
263        if [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
264            # Modify co2_ppm in physiq.def only for historical run
265            LMDZ_sed physiq.def co2_ppm     ${CO2_ppm}
266        fi
267    fi
268    # end CARBON_CYCLE
269
270    ##-- Set LMDZ_COSP_daily1979=y in section UserChoices in lmdz.card to activate
271    ##   COSP daily output for years 1979 and later (mandatory for historical CMIP5 run).
272    if ([ X"${lmdz_UserChoices_LMDZ_COSP_daily1979}" = X"y" ] &&  [ ${year} -ge 1979 ]) ; then
273        LMDZ_COSP_daily=y
274    fi
275
276
277    ## output.def parameters
278    #  columns in phys_output_filekeys refer to the filenames given in phys_out_filenames in physiq.def : 
279    #                                            histmth       histday        histhf    histfh3h   histhf3hm   histstn
280    LMDZ_sed output.def phys_out_filekeys        ${ok_mensuel} ${ok_journe}   ${ok_hf}  ${ok_hf3h} ${ok_hf3hm} ${ok_stn}
281    LMDZ_sed output.def ecrit_ISCCP ${LMDZ_ecrit_ISCCP}
282    LMDZ_sed output.def ok_cosp     ${LMDZ_COSP_OK}
283    LMDZ_sed output.def ok_mensuelCOSP  ${LMDZ_COSP_monthly}
284    LMDZ_sed output.def ok_journeCOSP   ${LMDZ_COSP_daily}
285    LMDZ_sed output.def ok_hfCOSP   ${LMDZ_COSP_hf}
286    LMDZ_sed output.def ok_histNMC  "${LMDZ_NMC_monthly}, ${LMDZ_NMC_daily}, ${LMDZ_NMC_hf}"
287
288    ## gcm.def parameters :
289    # Modification only for new physics
290    if [ X${LMDZ_Physics} = X"NPv3.0" ] ; then
291        LMDZ_sed gcm.def iphysiq     5
292    fi
293
294
295    ## run.def parameters
296    LMDZ_sed run.def dayref   ${InitDay}
297    LMDZ_sed run.def anneeref ${InitYear}
298    LMDZ_sed run.def calend   ${CalendarTypeForLmdz}
299    LMDZ_sed run.def nday     ${PeriodLengthInDays}
300    LMDZ_sed run.def raz_date ${RAZ_DATE}
301    LMDZ_sed run.def periodav ${LMDZ_periodav}
302    LMDZ_sed run.def adjust   ${LMDZ_adjust}
303
304    ## Read ByPass_hgardfou_teta option in lmdz.card --> divide teta* by 2 if [ $ByPass_hgardfou_teta = 1 ]
305    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta
306    ByPass_hgardfou_teta=${lmdz_UserChoices_ByPass_hgardfou_teta}
307    if [ ${ByPass_hgardfou_teta} = y ] ; then
308        awk '{ if ($0 ~ /^teta.*=/) {split($0,a,"=") ; print a[1]"="a[2]/2"."} else print $0}' gcm.def > gcm.def.tmp
309        IGCM_sys_Mv gcm.def.tmp gcm.def
310        echo
311        IGCM_debug_Print 1 "ByPass_hgardfou_teta : ^teta*/2 in gcm.def"
312        echo
313        cat gcm.def
314        ByPass_hgardfou_teta=n
315        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_teta "${ByPass_hgardfou_teta}"
316    fi
317
318    ## Read ByPass_hgardfou_mats option in lmdz.card --> purmats=y 2 if [ $ByPass_hgardfou_mats = 1 ]
319    IGCM_card_DefineVariableFromOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats
320    ByPass_hgardfou_mats=${lmdz_UserChoices_ByPass_hgardfou_mats}
321    if [ ${ByPass_hgardfou_mats} = y ] ; then
322        sed -e "s/^purmats=.*/purmats=y/" gcm.def > gcm.def.tmp
323        IGCM_sys_Mv gcm.def.tmp gcm.def
324        echo
325        IGCM_debug_Print 1 "ByPass_hgardfou_mats : purmats=y in gcm.def"
326        echo
327        cat gcm.def
328        ByPass_hgardfou_mats=n
329        IGCM_card_WriteOption ${SUBMIT_DIR}/COMP/lmdz.card UserChoices ByPass_hgardfou_mats "${ByPass_hgardfou_mats}"
330    fi
331
332    if ( ${FirstInitialize} ) ; then
333
334        if ( [ "${config_Restarts_OverRule}" = "n" ] && [ "${config_ATM_Restart}" = "n" ] ); then
335            if [ ${DRYRUN} -le 2 ] ; then
336                ##-- suppression of ozone file construction --
337                cp physiq.def physiq.def.save
338                LMDZ_sed physiq.def read_climoz 0
339                IGCM_sys_Cp ${R_EXE}/create_etat0_limit.e ${RUN_DIR}/.
340                if [ ${DRYRUN} -le 1 ] ; then
341                    ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e
342                    IGCM_sys_Put_Out start.nc    ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_start.nc
343                    IGCM_sys_Put_Out startphy.nc ${R_OUT_ATM_R}/${config_UserChoices_JobName}_${PeriodDateBegin}_startphy.nc
344                fi
345                IGCM_sys_Mv physiq.def.save physiq.def
346            else
347                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated"
348                echo "EXECUTION of ${HOST_MPIRUN_COMMAND} -np 1 ./create_etat0_limit.e simulated for DRYRUN = " $DRYRUN >> stack
349            fi
350        fi
351
352    fi
353
354    IGCM_debug_PopStack "ATM_Update"
355}
356
357#-----------------------------------
358function ATM_Finalize
359{
360    IGCM_debug_PushStack "ATM_Finalize"
361
362    [ ${CumulPeriod} -le ${LMDZ_NbPeriod_adjust} ] && IGCM_sys_Put_Out Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat ${R_OUT_ATM_D}/${config_UserChoices_JobName}_Bands_${RESOL_ATM_3D}_${NUM_PROC_ATM}prc.dat_${CumulPeriod}
363
364
365    # Add special treatement for CARBON CYCLE
366    if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] || [ ${lmdz_UserChoices_CARBON_CYCLE} = historical ] ; then
367        typeset CO2SBG_3V CO2SBG CO2MBG CO2SRF CO2LU CO2_ppm CO2_ppm_prec fCO2_ff
368
369        # Fossil fuel emission
370        if [ ${lmdz_UserChoices_CARBON_CYCLE} = control ] ; then
371            # For Control, no fossil fuel emission :
372            fCO2_ff=0
373            echo "Fossil Fuel for control run  :" ${fCO2_ff}
374        else
375            # For historical, get the fossile fuel file :
376            fCO2_ff=$( gawk "{if (match(\$0,\"${year}\ *${month}\")) {print \$3}}" ${SUBMIT_DIR}/PARAM/CMIP5_gridcar_CO2_emissions_fossil_fuel_Andres_1751-2007_monthly_SC.txt )
377            echo "Fossil Fuel for historical run  :" ${fCO2_ff}
378        fi
379
380        # Get the value of ocean carbon flux
381        CO2MBG=$( ${SUBMIT_DIR}/COMP/lmdz_analyse_pisces_out.awk ocean.output )
382        CO2MBG=$( echo ${CO2MBG} | sed -e "s/ *//" )
383        echo "Ocean carbon flux  :" ${CO2MBG}
384
385        # Get the value of land fluxes
386        set +A CO2SBG_3V -- $( ${SUBMIT_DIR}/COMP/lmdz_analyse_stomate_out.awk out_orchidee_0000 )
387        CO2SRF=$( echo ${CO2SBG_3V[0]} | sed -e "s/ *//" )
388        CO2LU=$( echo ${CO2SBG_3V[1]} | sed -e "s/ *//" )
389        CO2SBG=$( echo ${CO2SBG_3V[2]} | sed -e "s/ *//" )
390        echo "Land carbon flux (NEP)         :" ${CO2SRF}
391        echo "LU flux          (FLUC)        :" ${CO2LU}
392        echo "Total Land carbon flux (NBP)   :" ${CO2SBG}
393
394        # Previous CO2
395        CO2_ppm_prec=$( echo "${PreviousLinelog[*]}" | gawk -F '|' '{gsub(" ",""); print $4}' )
396        echo "Previous CO2  :" ${CO2_ppm_prec}
397
398        # Formula
399        CO2_ppm=$( echo "${CO2_ppm_prec} + (${fCO2_ff} + ${CO2MBG} + ${CO2SBG}) / 2.12" | bc -l )
400        echo "New CO2  :" ${CO2_ppm}
401
402        # Save CO2 values in ExeCpuLog variable contents 5 fields
403        echo "${CumulPeriod} ${PeriodDateBegin} ${PeriodDateEnd} ${CO2_ppm} ${CO2_ppm_prec} ${fCO2_ff} ${CO2MBG} ${CO2SBG} ${CO2LU}" |   \
404            gawk '{printf("  %11d | %15s | %15s | %22.15g | %20.15g | %11.8g | %11.8g | %12.8g | %12.8g \n", \
405                           $1,$2,$3,$4,$5,$6,$7,$8,$9)}' >> ${SUBMIT_DIR}/co2.log
406
407    fi
408
409    echo FINALIZE ATM !
410
411    IGCM_debug_PopStack "ATM_Finalize"
412}
Note: See TracBrowser for help on using the repository browser.