source: CONFIG/IPSLCM/IPSLCM5/branches/IPSLCM5_v2/EXP00/COMP/lmdz.card @ 906

Last change on this file since 906 was 906, checked in by mafoipsl, 14 years ago

Use noleap calendar as default. histrac history file is disabled and not saved anymore in lmdz.card.

File size: 5.0 KB
Line 
1[Compatibility]
2libIGCM=1.0
3
4[UserChoices]
5ByPass_hgardfou_teta=n
6ByPass_hgardfou_mats=n
7LMDZ_NbPeriod_adjust=3
8# LMDZ_NbPeriod_adjust=0
9# To force usage of this Bands file, put LMDZ_NbPeriod_adjust=0 and replace XXXXXXX by Restart Job Name
10# LMDZ_Bands_file_name=${ARCHIVE}/IGCM_OUT/IPSLCM5/XXXXXXX/ATM/Debug/XXXXXXX_Bands_96x95x19_3prc.dat_3
11
12[InitialStateFiles]
13List=   (${R_INIT}/ATM/${config_UserChoices_TagName}/Albedo.nc, .), \
14        (${R_INIT}/ATM/${config_UserChoices_TagName}/amipbc_sic_1x1_clim.nc, amipbc_sic_1x1.nc), \
15        (${R_INIT}/ATM/${config_UserChoices_TagName}/amipbc_sst_1x1_clim.nc, amipbc_sst_1x1.nc), \
16        (${R_INIT}/ATM/${config_UserChoices_TagName}/ECDYN.nc.20020101,      ECDYN.nc), \
17        (${R_INIT}/ATM/${config_UserChoices_TagName}/ECPHY.nc,      .), \
18        (${R_INIT}/ATM/${config_UserChoices_TagName}/Relief.nc,     .), \
19        (${R_INIT}/ATM/${config_UserChoices_TagName}/Rugos.nc,      .), \
20        (${R_INIT}/ATM/${config_UserChoices_TagName}/landiceref.nc, .), \
21        (${R_INIT}/ATM/${config_UserChoices_TagName}/climO3_LMDZORINCAREPRO_1995.nc, climoz.nc), \
22        (${R_INIT}/ATM/${config_UserChoices_TagName}/${opa9_UserChoices_ORCA_version}x${RESOL_ATM}/o2a.nc, .)
23
24[BoundaryFiles]
25List=   ()
26# With AR5 aerosols (including ASSO4M(=SO4), CSSO4M, AIBCM, ASBCM, AIPOMM, ASPOMM, ASSSM, CSSSM, SSSSM, CIDUSTM)
27# With AR5 ozone(tropo + strato from LMDZOR-INCA-REPROBUS simulations)
28ListNonDel= (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_1995.nc, aerosols1980.nc),\
29            (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/aerosols_11YearsClim_1860.nc, aerosols.nat.nc),\
30            (${R_BC}/ATM/${config_UserChoices_TagName}/${RESOL_ATM}/AR5/HISTORIQUE/climoz_LMDZ_1995.nc, climoz_LMDZ.nc)
31
32[ParametersFiles]
33List=   (${SUBMIT_DIR}/PARAM/physiq.def_L${RESOL_ATM_Z}, physiq.def), \
34        (${SUBMIT_DIR}/PARAM/gcm.def_${RESOL_ATM_3D},    gcm.def),    \
35        (${SUBMIT_DIR}/PARAM/run.def, .), \
36        (${SUBMIT_DIR}/PARAM/traceur.def, .)
37
38[RestartFiles]
39List=   (restart.nc, restart.nc, start.nc), \
40        (restartphy.nc, restartphy.nc,  startphy.nc)
41
42[OutputText]
43List=   (lmdz.x.prt)
44
45[OutputFiles]
46List=   (histmth.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histmth.nc,      Post_1M_histmth), \
47        (histNMC.nc,      ${R_OUT_ATM_O_M}/${PREFIX}_1M_histNMC.nc,      NONE), \
48        (dynzon.nc,       ${R_OUT_ATM_O_M}/${PREFIX}_1M_dynzon.nc,       NONE), \
49        (histday.nc,      ${R_OUT_ATM_O_D}/${PREFIX}_1D_histday.nc,      NONE), \
50        (histhf.nc,       ${R_OUT_ATM_O_H}/${PREFIX}_HF_histhf.nc,       NONE)
51
52[Post_1M_histmth]
53Patches= (Patch_20091030_histcom_time_axis)
54GatherWithInternal = (lon, lat, presnivs, time_counter, aire)
55TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, iwp, lwp, LWdnSFC, LWdnSFCclr, LWupSFCclr, LWdn200, LWdn200clr, LWup200, LWup200clr, precip, prw, pluc, psol, q2m, sens, sicf, slp, snow, soll0, soll, sols0, sols, SWdnSFC, SWupSFC, SWup200, SWdnTOA, SWupTOA, SWdn200, SWdnSFCclr, SWupSFCclr, SWupTOAclr, t2m, t2m_max, t2m_min, taux_ter, taux_sic, taux_lic, taux_oce, tauy_ter, tauy_sic, tauy_lic, tauy_oce, lat_ter, lat_sic, lat_lic, lat_oce, topl0, topl, tops0, tops, topswad, topswai, tsol, tsol_ter, tsol_lic, tsol_oce, tsol_sic , u10m, u500, v10m, v500, w500, pourc_ter, pourc_oce, pourc_sic, pourc_lic)
56ChunckJob2D = NONE
57TimeSeriesVars3D = ()
58ChunckJob3D = NONE
59
60[Post_1M_histNMC]
61Patches = ()
62GatherWithInternal = (lon, lat, presnivs, time_counter, aire)
63TimeSeriesVars2D = ()
64ChunckJob2D = NONE
65TimeSeriesVars3D = (temp, phi, q, u, v, rh)
66ChunckJob3D = NONE
67
68[Post_1M_dynzon]
69Patches = ()
70GatherWithInternal = (lon, lat, presnivs, time_counter)
71TimeSeriesVars2D = ()
72ChunckJob2D = NONE
73TimeSeriesVars3D = ()
74ChunckJob3D = NONE
75
76[Post_1D_histday]
77Patches= (Patch_20091030_histcom_time_axis)
78GatherWithInternal = (lon, lat, presnivs, time_counter)
79TimeSeriesVars2D = (bils, cldh, cldl, cldm, cldq, cldt, evap, flat, iwp, lwp, phi500, precip, pluc, plul, prw, psol, rh2m, q2m, sens, sicf, slp, soll, sols, SWdnSFC, taux, tauy, t2m, t2m_max, t2m_min, topl, tops, tsol, u10m, v10m, wind10m, wind10max, u850, v850, w850, phi850, q850, t850, u700, v700, w700, phi700, q700, t700, u500, v500, w500, phi500, q500, t500, u200, v200, w200, phi200, q200, t200)
80ChunckJob2D = NONE
81TimeSeriesVars3D = (temp, theta, ovap, ovapinit, geop, vitu, vitv, vitw, pres)
82ChunckJob3D = 50Y
83
84[Post_HF_histhf]
85Patches= (Patch_20091030_histcom_time_axis)
86GatherWithInternal = (lon, lat, presnivs, time_counter)
87TimeSeriesVars2D = (cldt, psol, q2m, slp, SWnetOR, SWdownOR, LWdownOR, precip, pluc, plul, prw, t2m, tsol, u10m, v10m, t1000, t925, t850, t700, t500, t300, t250, t200, t150, t100, t50, t30, t10, u1000, u925, u850, u700, u500, u300, u250, u200, u150, u100, u50, u30, u10, v1000, v925, v850, v700, v500, v300, v250, v200, v150, v100, v50, v30, v10, phi1000, phi925, phi850, phi700, phi500, phi300, phi250, phi200, phi150, phi100, phi50, phi30, phi10, w1000, w925, w850, w700, w500, w300, w250, w200, w150, w100, w50, w30, w10, q1000, q925, q850, q700, q500, q300, q250, q200, q150, q100, q50, q30, q10)
88ChunckJob2D = 30Y
89TimeSeriesVars3D = (temp, theta, ovap, ovapinit, vitu, vitv)
90ChunckJob3D = 10Y
Note: See TracBrowser for help on using the repository browser.